From Ville Skyttä: Spelling Fixes
[metze/wireshark/wip.git] / ui / text_import.c
1 /* text_import.c
2  * State machine for text import
3  * November 2010, Jaap Keuter <jaap.keuter@xs4all.nl>
4  *
5  * $Id$
6  *
7  * Wireshark - Network traffic analyzer
8  * By Gerald Combs <gerald@wireshark.org>
9  * Copyright 1998 Gerald Combs
10  *
11  * Based on text2pcap.c by Ashok Narayanan <ashokn@cisco.com>
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License
15  * as published by the Free Software Foundation; either version 2
16  * of the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
26  * USA.
27  */
28
29 /*******************************************************************************
30  *
31  * This utility reads in an ASCII hexdump of this common format:
32  *
33  * 00000000  00 E0 1E A7 05 6F 00 10 5A A0 B9 12 08 00 46 00 .....o..Z.....F.
34  * 00000010  03 68 00 00 00 00 0A 2E EE 33 0F 19 08 7F 0F 19 .h.......3......
35  * 00000020  03 80 94 04 00 00 10 01 16 A2 0A 00 03 50 00 0C .............P..
36  * 00000030  01 01 0F 19 03 80 11 01 1E 61 00 0C 03 01 0F 19 .........a......
37  *
38  * Each bytestring line consists of an offset, one or more bytes, and
39  * text at the end. An offset is defined as a hex string of more than
40  * two characters. A byte is defined as a hex string of exactly two
41  * characters. The text at the end is ignored, as is any text before
42  * the offset. Bytes read from a bytestring line are added to the
43  * current packet only if all the following conditions are satisfied:
44  *
45  * - No text appears between the offset and the bytes (any bytes appearing after
46  *   such text would be ignored)
47  *
48  * - The offset must be arithmetically correct, i.e. if the offset is 00000020, then
49  *   exactly 32 bytes must have been read into this packet before this. If the offset
50  *   is wrong, the packet is immediately terminated
51  *
52  * A packet start is signalled by a zero offset.
53  *
54  * Lines starting with #TEXT2PCAP are directives. These allow the user
55  * to embed instructions into the capture file which allows text2pcap
56  * to take some actions (e.g. specifying the encapsulation
57  * etc.). Currently no directives are implemented.
58  *
59  * Lines beginning with # which are not directives are ignored as
60  * comments. Currently all non-hexdump text is ignored by text2pcap;
61  * in the future, text processing may be added, but lines prefixed
62  * with '#' will still be ignored.
63  *
64  * The output is a libpcap packet containing Ethernet frames by
65  * default. This program takes options which allow the user to add
66  * dummy Ethernet, IP and UDP or TCP headers to the packets in order
67  * to allow dumps of L3 or higher protocols to be decoded.
68  *
69  * Considerable flexibility is built into this code to read hexdumps
70  * of slightly different formats. For example, any text prefixing the
71  * hexdump line is dropped (including mail forwarding '>'). The offset
72  * can be any hex number of four digits or greater.
73  *
74  * This converter cannot read a single packet greater than 64KiB-1. Packet
75  * snaplength is automatically set to 64KiB-1.
76  */
77
78 #include "config.h"
79
80 /*
81  * Just make sure we include the prototype for strptime as well
82  * (needed for glibc 2.2) but make sure we do this only if not
83  * yet defined.
84  */
85 #ifndef __USE_XOPEN
86 #  define __USE_XOPEN
87 #endif
88 #ifndef _XOPEN_SOURCE
89 #  ifndef __sun
90 #    define _XOPEN_SOURCE 600
91 #  endif
92 #endif
93
94 /*
95  * Defining _XOPEN_SOURCE is needed on some platforms, e.g. platforms
96  * using glibc, to expand the set of things system header files define.
97  *
98  * Unfortunately, on other platforms, such as some versions of Solaris
99  * (including Solaris 10), it *reduces* that set as well, causing
100  * strptime() not to be declared, presumably because the version of the
101  * X/Open spec that _XOPEN_SOURCE implies doesn't include strptime() and
102  * blah blah blah namespace pollution blah blah blah.
103  *
104  * So we define __EXTENSIONS__ so that "strptime()" is declared.
105  */
106 #ifndef __EXTENSIONS__
107 #  define __EXTENSIONS__
108 #endif
109
110 #include <ctype.h>
111 #include <stdio.h>
112 #include <stdlib.h>
113 #include <string.h>
114 #include <wsutil/file_util.h>
115
116 #include <time.h>
117 #include <glib.h>
118
119 #ifdef HAVE_UNISTD_H
120 # include <unistd.h>
121 #endif
122
123 #include <errno.h>
124 #include <assert.h>
125
126 #include <epan/tvbuff.h>
127 #include <wsutil/crc32.h>
128 #include <epan/in_cksum.h>
129
130 #ifdef NEED_STRPTIME_H
131 # include "wsutil/strptime.h"
132 #endif
133
134 #include "text_import.h"
135 #include "text_import_scanner.h"
136
137 /*--- Options --------------------------------------------------------------------*/
138
139 /* Debug level */
140 static int debug = 0;
141
142 /* Dummy Ethernet header */
143 static int hdr_ethernet = FALSE;
144 static guint32 hdr_ethernet_proto = 0;
145
146 /* Dummy IP header */
147 static int hdr_ip = FALSE;
148 static long hdr_ip_proto = 0;
149
150 /* Dummy UDP header */
151 static int hdr_udp = FALSE;
152 static guint32 hdr_dest_port = 0;
153 static guint32 hdr_src_port = 0;
154
155 /* Dummy TCP header */
156 static int hdr_tcp = FALSE;
157
158 /* Dummy SCTP header */
159 static int hdr_sctp = FALSE;
160 static guint32 hdr_sctp_src  = 0;
161 static guint32 hdr_sctp_dest = 0;
162 static guint32 hdr_sctp_tag  = 0;
163
164 /* Dummy DATA chunk header */
165 static int hdr_data_chunk = FALSE;
166 static guint8  hdr_data_chunk_type = 0;
167 static guint8  hdr_data_chunk_bits = 3;
168 static guint32 hdr_data_chunk_tsn  = 0;
169 static guint16 hdr_data_chunk_sid  = 0;
170 static guint16 hdr_data_chunk_ssn  = 0;
171 static guint32 hdr_data_chunk_ppid = 0;
172
173 static gboolean has_direction = FALSE;
174 static guint32 direction = 0;
175
176 /*--- Local data -----------------------------------------------------------------*/
177
178 /* This is where we store the packet currently being built */
179 static guint8 *packet_buf;
180 static guint32 curr_offset = 0;
181 static guint32 max_offset = IMPORT_MAX_PACKET;
182 static guint32 packet_start = 0;
183 static void start_new_packet (void);
184
185 /* This buffer contains strings present before the packet offset 0 */
186 #define PACKET_PREAMBLE_MAX_LEN    2048
187 static guint8 packet_preamble[PACKET_PREAMBLE_MAX_LEN+1];
188 static int packet_preamble_len = 0;
189
190 /* Time code of packet, derived from packet_preamble */
191 static time_t ts_sec = 0;
192 static guint32 ts_usec = 0;
193 static char *ts_fmt = NULL;
194 static struct tm timecode_default;
195
196 static wtap_dumper* wdh;
197
198 /* HDR_ETH Offset base to parse */
199 static guint32 offset_base = 16;
200
201 /* ----- State machine -----------------------------------------------------------*/
202
203 /* Current state of parser */
204 typedef enum {
205     INIT,             /* Waiting for start of new packet */
206     START_OF_LINE,    /* Starting from beginning of line */
207     READ_OFFSET,      /* Just read the offset */
208     READ_BYTE,        /* Just read a byte */
209     READ_TEXT         /* Just read text - ignore until EOL */
210 } parser_state_t;
211 static parser_state_t state = INIT;
212
213 static const char *state_str[] = {"Init",
214                            "Start-of-line",
215                            "Offset",
216                            "Byte",
217                            "Text"
218 };
219
220 static const char *token_str[] = {"",
221                            "Byte",
222                            "Offset",
223                            "Directive",
224                            "Text",
225                            "End-of-line"
226 };
227
228 /* ----- Skeleton Packet Headers --------------------------------------------------*/
229
230 typedef struct {
231     guint8  dest_addr[6];
232     guint8  src_addr[6];
233     guint16 l3pid;
234 } hdr_ethernet_t;
235
236 static hdr_ethernet_t HDR_ETHERNET = {
237     {0x20, 0x52, 0x45, 0x43, 0x56, 0x00},
238     {0x20, 0x53, 0x45, 0x4E, 0x44, 0x00},
239     0};
240
241 typedef struct {
242     guint8  ver_hdrlen;
243     guint8  dscp;
244     guint16 packet_length;
245     guint16 identification;
246     guint8  flags;
247     guint8  fragment;
248     guint8  ttl;
249     guint8  protocol;
250     guint16 hdr_checksum;
251     guint32 src_addr;
252     guint32 dest_addr;
253 } hdr_ip_t;
254
255 static hdr_ip_t HDR_IP =
256   {0x45, 0, 0, 0x3412, 0, 0, 0xff, 0, 0, 0x01010101, 0x02020202};
257
258 static struct {         /* pseudo header for checksum calculation */
259     guint32 src_addr;
260     guint32 dest_addr;
261     guint8  zero;
262     guint8  protocol;
263     guint16 length;
264 } pseudoh;
265
266 typedef struct {
267     guint16 source_port;
268     guint16 dest_port;
269     guint16 length;
270     guint16 checksum;
271 } hdr_udp_t;
272
273 static hdr_udp_t HDR_UDP = {0, 0, 0, 0};
274
275 typedef struct {
276     guint16 source_port;
277     guint16 dest_port;
278     guint32 seq_num;
279     guint32 ack_num;
280     guint8  hdr_length;
281     guint8  flags;
282     guint16 window;
283     guint16 checksum;
284     guint16 urg;
285 } hdr_tcp_t;
286
287 static hdr_tcp_t HDR_TCP = {0, 0, 0, 0, 0x50, 0, 0, 0, 0};
288
289 typedef struct {
290     guint16 src_port;
291     guint16 dest_port;
292     guint32 tag;
293     guint32 checksum;
294 } hdr_sctp_t;
295
296 static hdr_sctp_t HDR_SCTP = {0, 0, 0, 0};
297
298 typedef struct {
299     guint8  type;
300     guint8  bits;
301     guint16 length;
302     guint32 tsn;
303     guint16 sid;
304     guint16 ssn;
305     guint32 ppid;
306 } hdr_data_chunk_t;
307
308 static hdr_data_chunk_t HDR_DATA_CHUNK = {0, 0, 0, 0, 0, 0, 0};
309
310 /* Link-layer type; see net/bpf.h for details */
311 static guint pcap_link_type = 1;   /* Default is DLT_EN10MB */
312
313 /*----------------------------------------------------------------------
314  * Parse a single hex number
315  * Will abort the program if it can't parse the number
316  * Pass in TRUE if this is an offset, FALSE if not
317  */
318 static guint32
319 parse_num (const char *str, int offset)
320 {
321     unsigned long num;
322     char *c;
323
324     num = strtoul(str, &c, offset ? offset_base : 16);
325     if (c==str) {
326         fprintf(stderr, "FATAL ERROR: Bad hex number? [%s]\n", str);
327     }
328     return (guint32)num;
329 }
330
331 /*----------------------------------------------------------------------
332  * Write this byte into current packet
333  */
334 static void
335 write_byte (const char *str)
336 {
337     guint32 num;
338
339     num = parse_num(str, FALSE);
340     packet_buf[curr_offset] = (guint8) num;
341     curr_offset ++;
342     if (curr_offset >= max_offset) /* packet full */
343         start_new_packet();
344 }
345
346 /*----------------------------------------------------------------------
347  * Remove bytes from the current packet
348  */
349 static void
350 unwrite_bytes (guint32 nbytes)
351 {
352     curr_offset -= nbytes;
353 }
354
355 /*----------------------------------------------------------------------
356  * Determin SCTP chunk padding length
357  */
358 static guint32
359 number_of_padding_bytes (guint32 length)
360 {
361   guint32 remainder;
362
363   remainder = length % 4;
364
365   if (remainder == 0)
366     return 0;
367   else
368     return 4 - remainder;
369 }
370
371 /*----------------------------------------------------------------------
372  * Write current packet out
373  */
374 void
375 write_current_packet (void)
376 {
377     int prefix_length = 0;
378     int proto_length = 0;
379     int ip_length = 0;
380     int eth_trailer_length = 0;
381     int prefix_index = 0;
382     int i, padding_length;
383
384     if (curr_offset > 0) {
385         /* Write the packet */
386
387         /* Compute packet length */
388         prefix_length = 0;
389         if (hdr_data_chunk) { prefix_length += (int)sizeof(HDR_DATA_CHUNK); }
390         if (hdr_sctp) { prefix_length += (int)sizeof(HDR_SCTP); }
391         if (hdr_udp) { prefix_length += (int)sizeof(HDR_UDP); proto_length = prefix_length + curr_offset; }
392         if (hdr_tcp) { prefix_length += (int)sizeof(HDR_TCP); proto_length = prefix_length + curr_offset; }
393         if (hdr_ip) {
394             prefix_length += (int)sizeof(HDR_IP);
395             ip_length = prefix_length + curr_offset + ((hdr_data_chunk) ? number_of_padding_bytes(curr_offset) : 0);
396         }
397         if (hdr_ethernet) { prefix_length += (int)sizeof(HDR_ETHERNET); }
398
399         /* Make room for dummy header */
400         memmove(&packet_buf[prefix_length], packet_buf, curr_offset);
401
402         if (hdr_ethernet) {
403             /* Pad trailer */
404             if (prefix_length + curr_offset < 60) {
405                 eth_trailer_length = 60 - (prefix_length + curr_offset);
406             }
407         }
408
409         /* Write Ethernet header */
410         if (hdr_ethernet) {
411             HDR_ETHERNET.l3pid = g_htons(hdr_ethernet_proto);
412             memcpy(&packet_buf[prefix_index], &HDR_ETHERNET, sizeof(HDR_ETHERNET));
413             prefix_index += (int)sizeof(HDR_ETHERNET);
414         }
415
416         /* Write IP header */
417         if (hdr_ip) {
418             vec_t cksum_vector[1];
419
420             HDR_IP.packet_length = g_htons(ip_length);
421             HDR_IP.protocol = (guint8) hdr_ip_proto;
422             HDR_IP.hdr_checksum = 0;
423             cksum_vector[0].ptr = (guint8 *)&HDR_IP; cksum_vector[0].len = sizeof(HDR_IP);
424             HDR_IP.hdr_checksum = in_cksum(cksum_vector, 1);
425
426             memcpy(&packet_buf[prefix_index], &HDR_IP, sizeof(HDR_IP));
427             prefix_index += (int)sizeof(HDR_IP);
428         }
429
430         /* initialize pseudo header for checksum calculation */
431         pseudoh.src_addr    = HDR_IP.src_addr;
432         pseudoh.dest_addr   = HDR_IP.dest_addr;
433         pseudoh.zero        = 0;
434         pseudoh.protocol    = (guint8) hdr_ip_proto;
435         pseudoh.length      = g_htons(proto_length);
436
437         /* Write UDP header */
438         if (hdr_udp) {
439             vec_t cksum_vector[3];
440
441             HDR_UDP.source_port = g_htons(hdr_src_port);
442             HDR_UDP.dest_port = g_htons(hdr_dest_port);
443             HDR_UDP.length = g_htons(proto_length);
444
445             HDR_UDP.checksum = 0;
446             cksum_vector[0].ptr = (guint8 *)&pseudoh; cksum_vector[0].len = sizeof(pseudoh);
447             cksum_vector[1].ptr = (guint8 *)&HDR_UDP; cksum_vector[1].len = sizeof(HDR_UDP);
448             cksum_vector[2].ptr = &packet_buf[prefix_length]; cksum_vector[2].len = curr_offset;
449             HDR_UDP.checksum = in_cksum(cksum_vector, 3);
450
451             memcpy(&packet_buf[prefix_index], &HDR_UDP, sizeof(HDR_UDP));
452             prefix_index += (int)sizeof(HDR_UDP);
453         }
454
455         /* Write TCP header */
456         if (hdr_tcp) {
457             vec_t cksum_vector[3];
458
459             HDR_TCP.source_port = g_htons(hdr_src_port);
460             HDR_TCP.dest_port = g_htons(hdr_dest_port);
461             /* HDR_TCP.seq_num already correct */
462             HDR_TCP.window = g_htons(0x2000);
463
464             HDR_TCP.checksum = 0;
465             cksum_vector[0].ptr = (guint8 *)&pseudoh; cksum_vector[0].len = sizeof(pseudoh);
466             cksum_vector[1].ptr = (guint8 *)&HDR_TCP; cksum_vector[1].len = sizeof(HDR_TCP);
467             cksum_vector[2].ptr = &packet_buf[prefix_length]; cksum_vector[2].len = curr_offset;
468             HDR_TCP.checksum = in_cksum(cksum_vector, 3);
469
470             memcpy(&packet_buf[prefix_index], &HDR_TCP, sizeof(HDR_TCP));
471             prefix_index += (int)sizeof(HDR_TCP);
472         }
473
474         /* Compute DATA chunk header and append padding */
475         if (hdr_data_chunk) {
476             HDR_DATA_CHUNK.type   = hdr_data_chunk_type;
477             HDR_DATA_CHUNK.bits   = hdr_data_chunk_bits;
478             HDR_DATA_CHUNK.length = g_htons(curr_offset + sizeof(HDR_DATA_CHUNK));
479             HDR_DATA_CHUNK.tsn    = g_htonl(hdr_data_chunk_tsn);
480             HDR_DATA_CHUNK.sid    = g_htons(hdr_data_chunk_sid);
481             HDR_DATA_CHUNK.ssn    = g_htons(hdr_data_chunk_ssn);
482             HDR_DATA_CHUNK.ppid   = g_htonl(hdr_data_chunk_ppid);
483
484             padding_length = number_of_padding_bytes(curr_offset);
485             for (i=0; i<padding_length; i++)
486                 packet_buf[prefix_length+curr_offset+i] = 0;
487             curr_offset += padding_length;
488         }
489
490         /* Write SCTP header */
491         if (hdr_sctp) {
492             HDR_SCTP.src_port  = g_htons(hdr_sctp_src);
493             HDR_SCTP.dest_port = g_htons(hdr_sctp_dest);
494             HDR_SCTP.tag       = g_htonl(hdr_sctp_tag);
495             HDR_SCTP.checksum  = g_htonl(0);
496
497             HDR_SCTP.checksum  = crc32c_calculate(&HDR_SCTP, sizeof(HDR_SCTP), CRC32C_PRELOAD);
498             if (hdr_data_chunk)
499                 HDR_SCTP.checksum  = crc32c_calculate(&HDR_DATA_CHUNK, sizeof(HDR_DATA_CHUNK), HDR_SCTP.checksum);
500             HDR_SCTP.checksum  = g_htonl(~crc32c_calculate(&packet_buf[prefix_length], curr_offset, HDR_SCTP.checksum));
501
502             memcpy(&packet_buf[prefix_index], &HDR_SCTP, sizeof(HDR_SCTP));
503             prefix_index += (int)sizeof(HDR_SCTP);
504         }
505
506         /* Write DATA chunk header */
507         if (hdr_data_chunk) {
508             memcpy(&packet_buf[prefix_index], &HDR_DATA_CHUNK, sizeof(HDR_DATA_CHUNK));
509             /*prefix_index += (int)sizeof(HDR_DATA_CHUNK);*/
510         }
511
512         /* Write Ethernet trailer */
513         if (hdr_ethernet && eth_trailer_length > 0) {
514             memset(&packet_buf[prefix_length+curr_offset], 0, eth_trailer_length);
515         }
516
517         HDR_TCP.seq_num = g_ntohl(HDR_TCP.seq_num) + curr_offset;
518         HDR_TCP.seq_num = g_htonl(HDR_TCP.seq_num);
519
520         {
521             /* Write the packet */
522             struct wtap_pkthdr pkthdr;
523             int err;
524
525             pkthdr.ts.secs = (guint32)ts_sec;
526             pkthdr.ts.nsecs = ts_usec * 1000;
527             if (ts_fmt == NULL) { ts_usec++; }  /* fake packet counter */
528             pkthdr.caplen = pkthdr.len = prefix_length + curr_offset + eth_trailer_length;
529             pkthdr.pkt_encap = pcap_link_type;
530             pkthdr.interface_id = 0;
531             pkthdr.presence_flags = 0;
532             pkthdr.opt_comment = NULL;
533             pkthdr.drop_count = 0;
534             pkthdr.pack_flags = 0;
535             pkthdr.pack_flags |= direction;
536             pkthdr.presence_flags = WTAP_HAS_CAP_LEN|WTAP_HAS_INTERFACE_ID|WTAP_HAS_TS|WTAP_HAS_PACK_FLAGS;
537
538             wtap_dump(wdh, &pkthdr, packet_buf, &err);
539         }
540     }
541
542     packet_start += curr_offset;
543     curr_offset = 0;
544 }
545
546
547 /*----------------------------------------------------------------------
548  * Append a token to the packet preamble.
549  */
550 static void
551 append_to_preamble(char *str)
552 {
553     size_t toklen;
554
555     if (packet_preamble_len != 0) {
556         if (packet_preamble_len == PACKET_PREAMBLE_MAX_LEN)
557             return;    /* no room to add more preamble */
558         /* Add a blank separator between the previous token and this token. */
559         packet_preamble[packet_preamble_len++] = ' ';
560     }
561     toklen = strlen(str);
562     if (toklen != 0) {
563         if (packet_preamble_len + toklen > PACKET_PREAMBLE_MAX_LEN)
564             return;    /* no room to add the token to the preamble */
565         g_strlcpy(&packet_preamble[packet_preamble_len], str, PACKET_PREAMBLE_MAX_LEN);
566         packet_preamble_len += (int) toklen;
567         if (debug >= 2) {
568             char *c;
569             char xs[PACKET_PREAMBLE_MAX_LEN];
570             g_strlcpy(xs, packet_preamble, PACKET_PREAMBLE_MAX_LEN);
571             while ((c = strchr(xs, '\r')) != NULL) *c=' ';
572             fprintf (stderr, "[[append_to_preamble: \"%s\"]]", xs);
573         }
574     }
575 }
576
577 /*----------------------------------------------------------------------
578  * Parse the preamble to get the timecode.
579  */
580
581 static void
582 parse_preamble (void)
583 {
584     struct tm timecode;
585     char *subsecs;
586     char *p;
587     int  subseclen;
588     int  i;
589
590     /*
591      * Null-terminate the preamble.
592      */
593     packet_preamble[packet_preamble_len] = '\0';
594
595     if (has_direction) {
596         switch (packet_preamble[0]) {
597         case 'i':
598         case 'I':
599             direction = 0x00000001;
600             packet_preamble[0] = ' ';
601             break;
602         case 'o':
603         case 'O':
604             direction = 0x00000002;
605             packet_preamble[0] = ' ';
606             break;
607         default:
608             direction = 0x00000000;
609             break;
610         }
611         i = 0;
612         while (packet_preamble[i] == ' ' ||
613                packet_preamble[i] == '\r' ||
614                packet_preamble[i] == '\t') {
615             i++;
616         }
617         packet_preamble_len -= i;
618         /* Also move the trailing '\0'. */
619         memmove(packet_preamble, packet_preamble + i, packet_preamble_len + 1);
620     }
621
622     /*
623      * If no "-t" flag was specified, don't attempt to parse a packet
624      * preamble to extract a time stamp.
625      */
626     if (ts_fmt == NULL)
627         return;
628
629     /*
630      * Initialize to today localtime, just in case not all fields
631      * of the date and time are specified.
632      */
633
634     timecode = timecode_default;
635     ts_usec = 0;
636
637     /* Ensure preamble has more than two chars before attempting to parse.
638      * This should cover line breaks etc that get counted.
639      */
640     if ( strlen(packet_preamble) > 2 ) {
641         /* Get Time leaving subseconds */
642         subsecs = strptime( packet_preamble, ts_fmt, &timecode );
643         if (subsecs != NULL) {
644             /* Get the long time from the tm structure */
645             /*  (will return -1 if failure)            */
646             ts_sec  = mktime( &timecode );
647         } else
648             ts_sec = -1;    /* we failed to parse it */
649
650         /* This will ensure incorrectly parsed dates get set to zero */
651         if ( -1 == ts_sec )
652         {
653             /* Sanitize - remove all '\r' */
654             char *c;
655             while ((c = strchr(packet_preamble, '\r')) != NULL) *c=' ';
656             fprintf (stderr, "Failure processing time \"%s\" using time format \"%s\"\n   (defaulting to Jan 1,1970 00:00:00 GMT)\n",
657                  packet_preamble, ts_fmt);
658             if (debug >= 2) {
659                 fprintf(stderr, "timecode: %02d/%02d/%d %02d:%02d:%02d %d\n",
660                     timecode.tm_mday, timecode.tm_mon, timecode.tm_year,
661                     timecode.tm_hour, timecode.tm_min, timecode.tm_sec, timecode.tm_isdst);
662             }
663             ts_sec  = 0;  /* Jan 1,1970: 00:00 GMT; tshark/wireshark will display date/time as adjusted by timezone */
664             ts_usec = 0;
665         }
666         else
667         {
668             /* Parse subseconds */
669             ts_usec = (guint32)strtol(subsecs, &p, 10);
670             if (subsecs == p) {
671                 /* Error */
672                 ts_usec = 0;
673             } else {
674                 /*
675                  * Convert that number to a number
676                  * of microseconds; if it's N digits
677                  * long, it's in units of 10^(-N) seconds,
678                  * so, to convert it to units of
679                  * 10^-6 seconds, we multiply by
680                  * 10^(6-N).
681                  */
682                 subseclen = (int) (p - subsecs);
683                 if (subseclen > 6) {
684                     /*
685                      * *More* than 6 digits; 6-N is
686                      * negative, so we divide by
687                      * 10^(N-6).
688                      */
689                     for (i = subseclen - 6; i != 0; i--)
690                         ts_usec /= 10;
691                 } else if (subseclen < 6) {
692                     for (i = 6 - subseclen; i != 0; i--)
693                         ts_usec *= 10;
694                 }
695             }
696         }
697     }
698     if (debug >= 2) {
699         char *c;
700         while ((c = strchr(packet_preamble, '\r')) != NULL) *c=' ';
701         fprintf(stderr, "[[parse_preamble: \"%s\"]]\n", packet_preamble);
702         fprintf(stderr, "Format(%s), time(%u), subsecs(%u)\n", ts_fmt, (guint32)ts_sec, ts_usec);
703     }
704
705
706     /* Clear Preamble */
707     packet_preamble_len = 0;
708 }
709
710 /*----------------------------------------------------------------------
711  * Start a new packet
712  */
713 static void
714 start_new_packet (void)
715 {
716     if (debug>=1)
717         fprintf(stderr, "Start new packet\n");
718
719     /* Write out the current packet, if required */
720     write_current_packet();
721
722     /* Ensure we parse the packet preamble as it may contain the time */
723     parse_preamble();
724 }
725
726 /*----------------------------------------------------------------------
727  * Process a directive
728  */
729 static void
730 process_directive (char *str)
731 {
732     fprintf(stderr, "\n--- Directive [%s] currently unsupported ---\n", str+10);
733
734 }
735
736 /*----------------------------------------------------------------------
737  * Parse a single token (called from the scanner)
738  */
739 void
740 parse_token (token_t token, char *str)
741 {
742     guint32 num;
743
744     /*
745      * This is implemented as a simple state machine of five states.
746      * State transitions are caused by tokens being received from the
747      * scanner. The code should be self_documenting.
748      */
749
750     if (debug>=2) {
751         /* Sanitize - remove all '\r' */
752         char *c;
753         if (str!=NULL) { while ((c = strchr(str, '\r')) != NULL) *c=' '; }
754
755         fprintf(stderr, "(%s, %s \"%s\") -> (",
756                 state_str[state], token_str[token], str ? str : "");
757     }
758
759     switch(state) {
760
761     /* ----- Waiting for new packet -------------------------------------------*/
762     case INIT:
763         switch(token) {
764         case T_TEXT:
765             append_to_preamble(str);
766             break;
767         case T_DIRECTIVE:
768             process_directive(str);
769             break;
770         case T_OFFSET:
771             num = parse_num(str, TRUE);
772             if (num==0) {
773                 /* New packet starts here */
774                 start_new_packet();
775                 state = READ_OFFSET;
776             }
777             break;
778         default:
779             break;
780         }
781         break;
782
783     /* ----- Processing packet, start of new line -----------------------------*/
784     case START_OF_LINE:
785         switch(token) {
786         case T_TEXT:
787             append_to_preamble(str);
788             break;
789         case T_DIRECTIVE:
790             process_directive(str);
791             break;
792         case T_OFFSET:
793             num = parse_num(str, TRUE);
794             if (num==0) {
795                 /* New packet starts here */
796                 start_new_packet();
797                 packet_start = 0;
798                 state = READ_OFFSET;
799             } else if ((num - packet_start) != curr_offset) {
800                 /*
801                  * The offset we read isn't the one we expected.
802                  * This may only mean that we mistakenly interpreted
803                  * some text as byte values (e.g., if the text dump
804                  * of packet data included a number with spaces around
805                  * it).  If the offset is less than what we expected,
806                  * assume that's the problem, and throw away the putative
807                  * extra byte values.
808                  */
809                 if (num < curr_offset) {
810                     unwrite_bytes(curr_offset - num);
811                     state = READ_OFFSET;
812                 } else {
813                     /* Bad offset; switch to INIT state */
814                     if (debug>=1)
815                         fprintf(stderr, "Inconsistent offset. Expecting %0X, got %0X. Ignoring rest of packet\n",
816                                 curr_offset, num);
817                     write_current_packet();
818                     state = INIT;
819                 }
820             } else
821                 state = READ_OFFSET;
822             break;
823         default:
824             break;
825         }
826         break;
827
828     /* ----- Processing packet, read offset -----------------------------------*/
829     case READ_OFFSET:
830         switch(token) {
831         case T_BYTE:
832             /* Record the byte */
833             state = READ_BYTE;
834             write_byte(str);
835             break;
836         case T_TEXT:
837         case T_DIRECTIVE:
838         case T_OFFSET:
839             state = READ_TEXT;
840             break;
841         case T_EOL:
842             state = START_OF_LINE;
843             break;
844         default:
845             break;
846         }
847         break;
848
849     /* ----- Processing packet, read byte -------------------------------------*/
850     case READ_BYTE:
851         switch(token) {
852         case T_BYTE:
853             /* Record the byte */
854             write_byte(str);
855             break;
856         case T_TEXT:
857         case T_DIRECTIVE:
858         case T_OFFSET:
859             state = READ_TEXT;
860             break;
861         case T_EOL:
862             state = START_OF_LINE;
863             break;
864         default:
865             break;
866         }
867         break;
868
869     /* ----- Processing packet, read text -------------------------------------*/
870     case READ_TEXT:
871         switch(token) {
872         case T_EOL:
873             state = START_OF_LINE;
874             break;
875         default:
876             break;
877         }
878         break;
879
880     default:
881         fprintf(stderr, "FATAL ERROR: Bad state (%d)", state);
882         exit(-1);
883     }
884
885     if (debug>=2)
886         fprintf(stderr, ", %s)\n", state_str[state]);
887
888 }
889
890 /*----------------------------------------------------------------------
891  * take in the import config information
892  */
893 void
894 text_import_setup(text_import_info_t *info)
895 {
896     packet_buf = (guint8 *)g_malloc(sizeof(HDR_ETHERNET) + sizeof(HDR_IP) +
897                                     sizeof(HDR_SCTP) + sizeof(HDR_DATA_CHUNK) +
898                                     IMPORT_MAX_PACKET);
899
900     if (!packet_buf)
901     {
902         fprintf(stderr, "FATAL ERROR: no memory for packet buffer");
903         exit(-1);
904     }
905
906     /* Lets start from the beginning */
907     state = INIT;
908     curr_offset = 0;
909     packet_start = 0;
910     packet_preamble_len = 0;
911     ts_sec = time(0);            /* initialize to current time */
912     timecode_default = *localtime(&ts_sec);
913     timecode_default.tm_isdst = -1;     /* Unknown for now, depends on time given to the strptime() function */
914     ts_usec = 0;
915
916     /* Dummy headers */
917     hdr_ethernet = FALSE;
918     hdr_ip = FALSE;
919     hdr_udp = FALSE;
920     hdr_tcp = FALSE;
921     hdr_sctp = FALSE;
922     hdr_data_chunk = FALSE;
923
924     offset_base = (info->offset_type == OFFSET_HEX) ? 16 :
925                   (info->offset_type == OFFSET_OCT) ? 8 :
926                   (info->offset_type == OFFSET_DEC) ? 10 :
927                   16;
928
929     has_direction = info->has_direction;
930
931     if (info->date_timestamp)
932     {
933         ts_fmt = info->date_timestamp_format;
934     }
935
936     pcap_link_type = info->encapsulation;
937
938     wdh = info->wdh;
939
940     switch (info->dummy_header_type)
941     {
942         case HEADER_ETH:
943             hdr_ethernet = TRUE;
944             hdr_ethernet_proto = info->pid;
945             break;
946
947         case HEADER_IPV4:
948             hdr_ip = TRUE;
949             hdr_ip_proto = info->protocol;
950             hdr_ethernet = TRUE;
951             hdr_ethernet_proto = 0x800;
952             break;
953
954         case HEADER_UDP:
955             hdr_udp = TRUE;
956             hdr_tcp = FALSE;
957             hdr_src_port = info->src_port;
958             hdr_dest_port = info->dst_port;
959             hdr_ip = TRUE;
960             hdr_ip_proto = 17;
961             hdr_ethernet = TRUE;
962             hdr_ethernet_proto = 0x800;
963             break;
964
965         case HEADER_TCP:
966             hdr_tcp = TRUE;
967             hdr_udp = FALSE;
968             hdr_src_port = info->src_port;
969             hdr_dest_port = info->dst_port;
970             hdr_ip = TRUE;
971             hdr_ip_proto = 6;
972             hdr_ethernet = TRUE;
973             hdr_ethernet_proto = 0x800;
974             break;
975
976         case HEADER_SCTP:
977             hdr_sctp = TRUE;
978             hdr_sctp_src = info->src_port;
979             hdr_sctp_dest = info->dst_port;
980             hdr_sctp_tag = info->tag;
981             hdr_ip = TRUE;
982             hdr_ip_proto = 132;
983             hdr_ethernet = TRUE;
984             hdr_ethernet_proto = 0x800;
985             break;
986
987         case HEADER_SCTP_DATA:
988             hdr_sctp = TRUE;
989             hdr_data_chunk = TRUE;
990             hdr_sctp_src = info->src_port;
991             hdr_sctp_dest = info->dst_port;
992             hdr_data_chunk_ppid = info->ppi;
993             hdr_ip = TRUE;
994             hdr_ip_proto = 132;
995             hdr_ethernet = TRUE;
996             hdr_ethernet_proto = 0x800;
997             break;
998
999         default:
1000             break;
1001     }
1002
1003     max_offset = info->max_frame_length;
1004 }
1005
1006 /*----------------------------------------------------------------------
1007  * Clean up after text import
1008  */
1009 void
1010 text_import_cleanup(void)
1011 {
1012     g_free(packet_buf);
1013 }
1014
1015 /*
1016  * Editor modelines
1017  *
1018  * Local Variables:
1019  * c-basic-offset: 4
1020  * tab-width: 8
1021  * indent-tabs-mode: nil
1022  * End:
1023  *
1024  * ex: set shiftwidth=4 tabstop=8 expandtab:
1025  * :indentSize=4:tabSize=8:noTabs=true:
1026  */