2 * Unix SMB/CIFS implementation.
3 * RPC Pipe client / server routines
4 * Almost completely rewritten by (C) Jeremy Allison 2005 - 2010
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 /* this module apparently provides an implementation of DCE/RPC over a
21 * named pipe (IPC$ connection using SMBtrans). details of DCE/RPC
22 * documentation are available (in on-line form) from the X-Open group.
24 * this module should provide a level of abstraction between SMB
25 * and DCE/RPC, while minimising the amount of mallocs, unnecessary
26 * data copies, and network traffic.
31 #include "srv_pipe_internal.h"
32 #include "../librpc/gen_ndr/ndr_schannel.h"
33 #include "../libcli/auth/schannel.h"
34 #include "../libcli/auth/spnego.h"
35 #include "dcesrv_ntlmssp.h"
36 #include "dcesrv_gssapi.h"
37 #include "dcesrv_spnego.h"
38 #include "rpc_server.h"
42 #define DBGC_CLASS DBGC_RPC_SRV
45 * Dump everything from the start of the end up of the provided data
46 * into a file, but only at debug level >= 50
48 static void dump_pdu_region(const char *name, int v,
49 DATA_BLOB *data, size_t start, size_t end)
55 if (DEBUGLEVEL < 50) return;
57 if (start > data->length || end > data->length || start > end) return;
59 for (i = 1; i < 100; i++) {
61 fname = talloc_asprintf(talloc_tos(),
65 fname = talloc_asprintf(talloc_tos(),
72 fd = open(fname, O_WRONLY|O_CREAT|O_EXCL, 0644);
73 if (fd != -1 || errno != EEXIST) break;
76 sz = write(fd, data->data + start, end - start);
78 if ((sz != end - start) || (i != 0) ) {
79 DEBUG(0, ("Error writing/closing %s: %ld!=%ld %d\n",
80 fname, (unsigned long)sz,
81 (unsigned long)end - start, i));
83 DEBUG(0,("created %s\n", fname));
89 static DATA_BLOB generic_session_key(void)
91 return data_blob_const("SystemLibraryDTC", 16);
94 /*******************************************************************
95 Generate the next PDU to be returned from the data.
96 ********************************************************************/
98 static NTSTATUS create_next_packet(TALLOC_CTX *mem_ctx,
99 struct pipe_auth_data *auth,
102 size_t data_sent_length,
106 union dcerpc_payload u;
115 ZERO_STRUCT(u.response);
117 /* Set up rpc packet pfc flags. */
118 if (data_sent_length == 0) {
119 pfc_flags = DCERPC_PFC_FLAG_FIRST;
124 /* Work out how much we can fit in a single PDU. */
125 data_left = rdata->length - data_sent_length;
127 /* Ensure there really is data left to send. */
129 DEBUG(0, ("No data left to send !\n"));
130 return NT_STATUS_BUFFER_TOO_SMALL;
133 status = dcerpc_guess_sizes(auth,
134 DCERPC_RESPONSE_LENGTH,
136 RPC_MAX_PDU_FRAG_LEN,
137 SERVER_NDR_PADDING_SIZE,
138 &data_to_send, &frag_len,
139 &auth_len, &pad_len);
140 if (!NT_STATUS_IS_OK(status)) {
144 /* Set up the alloc hint. This should be the data left to send. */
145 u.response.alloc_hint = data_left;
147 /* Work out if this PDU will be the last. */
148 if (data_sent_length + data_to_send >= rdata->length) {
149 pfc_flags |= DCERPC_PFC_FLAG_LAST;
152 /* Prepare data to be NDR encoded. */
153 u.response.stub_and_verifier =
154 data_blob_const(rdata->data + data_sent_length, data_to_send);
156 /* Store the packet in the data stream. */
157 status = dcerpc_push_ncacn_packet(mem_ctx, DCERPC_PKT_RESPONSE,
158 pfc_flags, auth_len, call_id,
160 if (!NT_STATUS_IS_OK(status)) {
161 DEBUG(0, ("Failed to marshall RPC Packet.\n"));
166 /* Set the proper length on the pdu, including padding.
167 * Only needed if an auth trailer will be appended. */
168 dcerpc_set_frag_length(frag, frag->length
170 + DCERPC_AUTH_TRAILER_LENGTH
175 status = dcerpc_add_auth_footer(auth, pad_len, frag);
176 if (!NT_STATUS_IS_OK(status)) {
177 data_blob_free(frag);
182 *pdu_size = data_to_send;
186 /*******************************************************************
187 Generate the next PDU to be returned from the data in p->rdata.
188 ********************************************************************/
190 bool create_next_pdu(struct pipes_struct *p)
196 * If we're in the fault state, keep returning fault PDU's until
197 * the pipe gets closed. JRA.
199 if (p->fault_state) {
200 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
204 status = create_next_packet(p->mem_ctx, &p->auth,
205 p->call_id, &p->out_data.rdata,
206 p->out_data.data_sent_length,
207 &p->out_data.frag, &pdu_size);
208 if (!NT_STATUS_IS_OK(status)) {
209 DEBUG(0, ("Failed to create packet with error %s, "
210 "(auth level %u / type %u)\n",
212 (unsigned int)p->auth.auth_level,
213 (unsigned int)p->auth.auth_type));
217 /* Setup the counts for this PDU. */
218 p->out_data.data_sent_length += pdu_size;
219 p->out_data.current_pdu_sent = 0;
224 static bool pipe_init_outgoing_data(struct pipes_struct *p);
226 /*******************************************************************
227 Marshall a bind_nak pdu.
228 *******************************************************************/
230 static bool setup_bind_nak(struct pipes_struct *p, struct ncacn_packet *pkt)
233 union dcerpc_payload u;
235 /* Free any memory in the current return data buffer. */
236 pipe_init_outgoing_data(p);
239 * Initialize a bind_nak header.
244 u.bind_nak.reject_reason = 0;
247 * Marshall directly into the outgoing PDU space. We
248 * must do this as we need to set to the bind response
249 * header and are never sending more than one PDU here.
252 status = dcerpc_push_ncacn_packet(p->mem_ctx,
254 DCERPC_PFC_FLAG_FIRST |
255 DCERPC_PFC_FLAG_LAST,
260 if (!NT_STATUS_IS_OK(status)) {
264 p->out_data.data_sent_length = 0;
265 p->out_data.current_pdu_sent = 0;
267 TALLOC_FREE(p->auth.auth_ctx);
268 p->auth.auth_level = DCERPC_AUTH_LEVEL_NONE;
269 p->auth.auth_type = DCERPC_AUTH_TYPE_NONE;
270 p->pipe_bound = False;
275 /*******************************************************************
276 Marshall a fault pdu.
277 *******************************************************************/
279 bool setup_fault_pdu(struct pipes_struct *p, NTSTATUS fault_status)
282 union dcerpc_payload u;
284 /* Free any memory in the current return data buffer. */
285 pipe_init_outgoing_data(p);
288 * Initialize a fault header.
293 u.fault.status = NT_STATUS_V(fault_status);
294 u.fault._pad = data_blob_talloc_zero(p->mem_ctx, 4);
297 * Marshall directly into the outgoing PDU space. We
298 * must do this as we need to set to the bind response
299 * header and are never sending more than one PDU here.
302 status = dcerpc_push_ncacn_packet(p->mem_ctx,
304 DCERPC_PFC_FLAG_FIRST |
305 DCERPC_PFC_FLAG_LAST |
306 DCERPC_PFC_FLAG_DID_NOT_EXECUTE,
311 if (!NT_STATUS_IS_OK(status)) {
315 p->out_data.data_sent_length = 0;
316 p->out_data.current_pdu_sent = 0;
321 /*******************************************************************
322 Ensure a bind request has the correct abstract & transfer interface.
323 Used to reject unknown binds from Win2k.
324 *******************************************************************/
326 static bool check_bind_req(struct pipes_struct *p,
327 struct ndr_syntax_id* abstract,
328 struct ndr_syntax_id* transfer,
331 struct pipe_rpc_fns *context_fns;
333 DEBUG(3,("check_bind_req for %s\n",
334 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
336 /* we have to check all now since win2k introduced a new UUID on the lsaprpc pipe */
337 if (rpc_srv_pipe_exists_by_id(abstract) &&
338 ndr_syntax_id_equal(transfer, &ndr_transfer_syntax)) {
339 DEBUG(3, ("check_bind_req: \\PIPE\\%s -> \\PIPE\\%s\n",
340 rpc_srv_get_pipe_cli_name(abstract),
341 rpc_srv_get_pipe_srv_name(abstract)));
346 context_fns = SMB_MALLOC_P(struct pipe_rpc_fns);
347 if (context_fns == NULL) {
348 DEBUG(0,("check_bind_req: malloc() failed!\n"));
352 context_fns->next = context_fns->prev = NULL;
353 context_fns->n_cmds = rpc_srv_get_pipe_num_cmds(abstract);
354 context_fns->cmds = rpc_srv_get_pipe_cmds(abstract);
355 context_fns->context_id = context_id;
357 /* add to the list of open contexts */
359 DLIST_ADD( p->contexts, context_fns );
365 * Is a named pipe known?
366 * @param[in] cli_filename The pipe name requested by the client
367 * @result Do we want to serve this?
369 bool is_known_pipename(const char *cli_filename, struct ndr_syntax_id *syntax)
371 const char *pipename = cli_filename;
374 if (strnequal(pipename, "\\PIPE\\", 6)) {
378 if (*pipename == '\\') {
382 if (lp_disable_spoolss() && strequal(pipename, "spoolss")) {
383 DEBUG(10, ("refusing spoolss access\n"));
387 if (rpc_srv_get_pipe_interface_by_cli_name(pipename, syntax)) {
391 status = smb_probe_module("rpc", pipename);
392 if (!NT_STATUS_IS_OK(status)) {
393 DEBUG(10, ("is_known_pipename: %s unknown\n", cli_filename));
396 DEBUG(10, ("is_known_pipename: %s loaded dynamically\n", pipename));
399 * Scan the list again for the interface id
401 if (rpc_srv_get_pipe_interface_by_cli_name(pipename, syntax)) {
405 DEBUG(10, ("is_known_pipename: pipe %s did not register itself!\n",
411 /*******************************************************************
412 Handle the first part of a SPNEGO bind auth.
413 *******************************************************************/
415 static bool pipe_spnego_auth_bind(struct pipes_struct *p,
417 struct dcerpc_auth *auth_info,
420 struct spnego_context *spnego_ctx;
423 status = spnego_server_auth_start(p,
424 (auth_info->auth_level ==
425 DCERPC_AUTH_LEVEL_INTEGRITY),
426 (auth_info->auth_level ==
427 DCERPC_AUTH_LEVEL_PRIVACY),
429 &auth_info->credentials,
432 if (!NT_STATUS_IS_OK(status)) {
433 DEBUG(0, ("Failed SPNEGO negotiate (%s)\n",
438 /* Make sure data is bound to the memctx, to be freed the caller */
439 talloc_steal(mem_ctx, response->data);
441 p->auth.auth_ctx = spnego_ctx;
442 p->auth.auth_type = DCERPC_AUTH_TYPE_SPNEGO;
444 DEBUG(10, ("SPNEGO auth started\n"));
449 /*******************************************************************
450 Handle an schannel bind auth.
451 *******************************************************************/
453 static bool pipe_schannel_auth_bind(struct pipes_struct *p,
455 struct dcerpc_auth *auth_info,
458 struct NL_AUTH_MESSAGE neg;
459 struct NL_AUTH_MESSAGE reply;
462 struct netlogon_creds_CredentialState *creds;
463 enum ndr_err_code ndr_err;
464 struct schannel_state *schannel_auth;
466 ndr_err = ndr_pull_struct_blob(
467 &auth_info->credentials, mem_ctx, &neg,
468 (ndr_pull_flags_fn_t)ndr_pull_NL_AUTH_MESSAGE);
469 if (!NDR_ERR_CODE_IS_SUCCESS(ndr_err)) {
470 DEBUG(0,("pipe_schannel_auth_bind: Could not unmarshal SCHANNEL auth neg\n"));
474 if (DEBUGLEVEL >= 10) {
475 NDR_PRINT_DEBUG(NL_AUTH_MESSAGE, &neg);
478 if (!(neg.Flags & NL_FLAG_OEM_NETBIOS_COMPUTER_NAME)) {
479 DEBUG(0,("pipe_schannel_auth_bind: Did not receive netbios computer name\n"));
484 * The neg.oem_netbios_computer.a key here must match the remote computer name
485 * given in the DOM_CLNT_SRV.uni_comp_name used on all netlogon pipe
486 * operations that use credentials.
490 status = schannel_get_creds_state(p, lp_private_dir(),
491 neg.oem_netbios_computer.a, &creds);
494 if (!NT_STATUS_IS_OK(status)) {
495 DEBUG(0, ("pipe_schannel_auth_bind: Attempt to bind using schannel without successful serverauth2\n"));
499 schannel_auth = talloc(p, struct schannel_state);
500 if (!schannel_auth) {
505 schannel_auth->state = SCHANNEL_STATE_START;
506 schannel_auth->seq_num = 0;
507 schannel_auth->initiator = false;
508 schannel_auth->creds = creds;
511 * JRA. Should we also copy the schannel session key into the pipe session key p->session_key
512 * here ? We do that for NTLMSSP, but the session key is already set up from the vuser
513 * struct of the person who opened the pipe. I need to test this further. JRA.
515 * VL. As we are mapping this to guest set the generic key
516 * "SystemLibraryDTC" key here. It's a bit difficult to test against
517 * W2k3, as it does not allow schannel binds against SAMR and LSA
521 ret = session_info_set_session_key(p->session_info, generic_session_key());
524 DEBUG(0, ("session_info_set_session_key failed\n"));
528 /*** SCHANNEL verifier ***/
530 reply.MessageType = NL_NEGOTIATE_RESPONSE;
532 reply.Buffer.dummy = 5; /* ??? actually I don't think
533 * this has any meaning
536 ndr_err = ndr_push_struct_blob(response, mem_ctx, &reply,
537 (ndr_push_flags_fn_t)ndr_push_NL_AUTH_MESSAGE);
538 if (!NDR_ERR_CODE_IS_SUCCESS(ndr_err)) {
539 DEBUG(0,("Failed to marshall NL_AUTH_MESSAGE.\n"));
543 if (DEBUGLEVEL >= 10) {
544 NDR_PRINT_DEBUG(NL_AUTH_MESSAGE, &reply);
547 DEBUG(10,("pipe_schannel_auth_bind: schannel auth: domain [%s] myname [%s]\n",
548 neg.oem_netbios_domain.a, neg.oem_netbios_computer.a));
550 /* We're finished with this bind - no more packets. */
551 p->auth.auth_ctx = schannel_auth;
552 p->auth.auth_type = DCERPC_AUTH_TYPE_SCHANNEL;
554 p->pipe_bound = True;
559 /*******************************************************************
560 Handle an NTLMSSP bind auth.
561 *******************************************************************/
563 static bool pipe_ntlmssp_auth_bind(struct pipes_struct *p,
565 struct dcerpc_auth *auth_info,
568 struct auth_ntlmssp_state *ntlmssp_state = NULL;
571 if (strncmp((char *)auth_info->credentials.data, "NTLMSSP", 7) != 0) {
572 DEBUG(0, ("Failed to read NTLMSSP in blob\n"));
576 /* We have an NTLMSSP blob. */
577 status = ntlmssp_server_auth_start(p,
578 (auth_info->auth_level ==
579 DCERPC_AUTH_LEVEL_INTEGRITY),
580 (auth_info->auth_level ==
581 DCERPC_AUTH_LEVEL_PRIVACY),
583 &auth_info->credentials,
586 if (!NT_STATUS_EQUAL(status, NT_STATUS_OK)) {
587 DEBUG(0, (__location__ ": auth_ntlmssp_start failed: %s\n",
592 /* Make sure data is bound to the memctx, to be freed the caller */
593 talloc_steal(mem_ctx, response->data);
595 p->auth.auth_ctx = ntlmssp_state;
596 p->auth.auth_type = DCERPC_AUTH_TYPE_NTLMSSP;
598 DEBUG(10, (__location__ ": NTLMSSP auth started\n"));
603 /*******************************************************************
604 Process an NTLMSSP authentication response.
605 If this function succeeds, the user has been authenticated
606 and their domain, name and calling workstation stored in
608 *******************************************************************/
610 static bool pipe_ntlmssp_verify_final(TALLOC_CTX *mem_ctx,
611 struct auth_ntlmssp_state *ntlmssp_ctx,
612 enum dcerpc_AuthLevel auth_level,
613 struct client_address *client_id,
614 struct ndr_syntax_id *syntax,
615 struct auth_serversupplied_info **session_info)
620 DEBUG(5, (__location__ ": pipe %s checking user details\n",
621 get_pipe_name_from_syntax(talloc_tos(), syntax)));
623 /* Finally - if the pipe negotiated integrity (sign) or privacy (seal)
624 ensure the underlying NTLMSSP flags are also set. If not we should
627 status = ntlmssp_server_check_flags(ntlmssp_ctx,
629 DCERPC_AUTH_LEVEL_INTEGRITY),
631 DCERPC_AUTH_LEVEL_PRIVACY));
632 if (!NT_STATUS_IS_OK(status)) {
633 DEBUG(0, (__location__ ": Client failed to negotatie proper "
634 "security for pipe %s\n",
635 get_pipe_name_from_syntax(talloc_tos(), syntax)));
639 TALLOC_FREE(*session_info);
641 status = ntlmssp_server_get_user_info(ntlmssp_ctx,
642 mem_ctx, session_info);
643 if (!NT_STATUS_IS_OK(status)) {
644 DEBUG(0, (__location__ ": failed to obtain the server info "
645 "for authenticated user: %s\n", nt_errstr(status)));
649 if ((*session_info)->security_token == NULL) {
650 DEBUG(1, ("Auth module failed to provide nt_user_token\n"));
655 * We're an authenticated bind over smb, so the session key needs to
656 * be set to "SystemLibraryDTC". Weird, but this is what Windows
657 * does. See the RPC-SAMBA3SESSIONKEY.
660 ret = session_info_set_session_key((*session_info), generic_session_key());
662 DEBUG(0, ("Failed to set session key!\n"));
669 /*******************************************************************
670 Handle a GSSAPI bind auth.
671 *******************************************************************/
673 static bool pipe_gssapi_auth_bind(struct pipes_struct *p,
675 struct dcerpc_auth *auth_info,
679 struct gse_context *gse_ctx = NULL;
681 status = gssapi_server_auth_start(p,
682 (auth_info->auth_level ==
683 DCERPC_AUTH_LEVEL_INTEGRITY),
684 (auth_info->auth_level ==
685 DCERPC_AUTH_LEVEL_PRIVACY),
687 &auth_info->credentials,
690 if (!NT_STATUS_IS_OK(status)) {
691 DEBUG(0, ("Failed to init dcerpc gssapi server (%s)\n",
696 /* Make sure data is bound to the memctx, to be freed the caller */
697 talloc_steal(mem_ctx, response->data);
699 p->auth.auth_ctx = gse_ctx;
700 p->auth.auth_type = DCERPC_AUTH_TYPE_KRB5;
702 DEBUG(10, ("KRB5 auth started\n"));
707 TALLOC_FREE(gse_ctx);
711 static NTSTATUS pipe_gssapi_verify_final(TALLOC_CTX *mem_ctx,
712 struct gse_context *gse_ctx,
713 struct client_address *client_id,
714 struct auth_serversupplied_info **session_info)
719 /* Finally - if the pipe negotiated integrity (sign) or privacy (seal)
720 ensure the underlying flags are also set. If not we should
723 status = gssapi_server_check_flags(gse_ctx);
724 if (!NT_STATUS_IS_OK(status)) {
725 DEBUG(0, ("Requested Security Layers not honored!\n"));
729 status = gssapi_server_get_user_info(gse_ctx, mem_ctx,
730 client_id, session_info);
731 if (!NT_STATUS_IS_OK(status)) {
732 DEBUG(0, (__location__ ": failed to obtain the server info "
733 "for authenticated user: %s\n", nt_errstr(status)));
737 if ((*session_info)->security_token == NULL) {
738 status = create_local_token(*session_info);
739 if (!NT_STATUS_IS_OK(status)) {
740 DEBUG(1, ("Failed to create local user token (%s)\n",
742 status = NT_STATUS_ACCESS_DENIED;
747 /* TODO: this is what the ntlmssp code does with the session_key, check
748 * it is ok with gssapi too */
750 * We're an authenticated bind over smb, so the session key needs to
751 * be set to "SystemLibraryDTC". Weird, but this is what Windows
752 * does. See the RPC-SAMBA3SESSIONKEY.
755 bret = session_info_set_session_key((*session_info), generic_session_key());
757 return NT_STATUS_ACCESS_DENIED;
763 static NTSTATUS pipe_auth_verify_final(struct pipes_struct *p)
765 enum spnego_mech auth_type;
766 struct auth_ntlmssp_state *ntlmssp_ctx;
767 struct spnego_context *spnego_ctx;
768 struct gse_context *gse_ctx;
772 switch (p->auth.auth_type) {
773 case DCERPC_AUTH_TYPE_NTLMSSP:
774 ntlmssp_ctx = talloc_get_type_abort(p->auth.auth_ctx,
775 struct auth_ntlmssp_state);
776 if (!pipe_ntlmssp_verify_final(p, ntlmssp_ctx,
778 p->client_id, &p->syntax,
780 return NT_STATUS_ACCESS_DENIED;
783 case DCERPC_AUTH_TYPE_KRB5:
784 gse_ctx = talloc_get_type_abort(p->auth.auth_ctx,
786 status = pipe_gssapi_verify_final(p, gse_ctx,
789 if (!NT_STATUS_IS_OK(status)) {
790 DEBUG(1, ("gssapi bind failed with: %s",
795 case DCERPC_AUTH_TYPE_SPNEGO:
796 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
797 struct spnego_context);
798 status = spnego_get_negotiated_mech(spnego_ctx,
799 &auth_type, &mech_ctx);
800 if (!NT_STATUS_IS_OK(status)) {
801 DEBUG(0, ("Bad SPNEGO state (%s)\n",
807 gse_ctx = talloc_get_type_abort(mech_ctx,
809 status = pipe_gssapi_verify_final(p, gse_ctx,
812 if (!NT_STATUS_IS_OK(status)) {
813 DEBUG(1, ("gssapi bind failed with: %s",
819 ntlmssp_ctx = talloc_get_type_abort(mech_ctx,
820 struct auth_ntlmssp_state);
821 if (!pipe_ntlmssp_verify_final(p, ntlmssp_ctx,
826 return NT_STATUS_ACCESS_DENIED;
830 DEBUG(0, (__location__ ": incorrect spnego type "
831 "(%d).\n", auth_type));
832 return NT_STATUS_ACCESS_DENIED;
836 DEBUG(0, (__location__ ": incorrect auth type (%u).\n",
837 (unsigned int)p->auth.auth_type));
838 return NT_STATUS_ACCESS_DENIED;
841 p->pipe_bound = true;
846 /*******************************************************************
847 Respond to a pipe bind request.
848 *******************************************************************/
850 static bool api_pipe_bind_req(struct pipes_struct *p,
851 struct ncacn_packet *pkt)
853 struct dcerpc_auth auth_info;
855 unsigned int auth_type = DCERPC_AUTH_TYPE_NONE;
857 struct ndr_syntax_id id;
858 union dcerpc_payload u;
859 struct dcerpc_ack_ctx bind_ack_ctx;
860 DATA_BLOB auth_resp = data_blob_null;
861 DATA_BLOB auth_blob = data_blob_null;
863 /* No rebinds on a bound pipe - use alter context. */
865 DEBUG(2,("api_pipe_bind_req: rejecting bind request on bound "
867 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
868 return setup_bind_nak(p, pkt);
871 if (pkt->u.bind.num_contexts == 0) {
872 DEBUG(0, ("api_pipe_bind_req: no rpc contexts around\n"));
877 * Try and find the correct pipe name to ensure
878 * that this is a pipe name we support.
880 id = pkt->u.bind.ctx_list[0].abstract_syntax;
881 if (rpc_srv_pipe_exists_by_id(&id)) {
882 DEBUG(3, ("api_pipe_bind_req: \\PIPE\\%s -> \\PIPE\\%s\n",
883 rpc_srv_get_pipe_cli_name(&id),
884 rpc_srv_get_pipe_srv_name(&id)));
886 status = smb_probe_module(
887 "rpc", get_pipe_name_from_syntax(
889 &pkt->u.bind.ctx_list[0].abstract_syntax));
891 if (NT_STATUS_IS_ERR(status)) {
892 DEBUG(3,("api_pipe_bind_req: Unknown pipe name %s in bind request.\n",
893 get_pipe_name_from_syntax(
895 &pkt->u.bind.ctx_list[0].abstract_syntax)));
897 return setup_bind_nak(p, pkt);
900 if (rpc_srv_get_pipe_interface_by_cli_name(
901 get_pipe_name_from_syntax(talloc_tos(),
904 DEBUG(3, ("api_pipe_bind_req: \\PIPE\\%s -> \\PIPE\\%s\n",
905 rpc_srv_get_pipe_cli_name(&id),
906 rpc_srv_get_pipe_srv_name(&id)));
908 DEBUG(0, ("module %s doesn't provide functions for "
910 get_pipe_name_from_syntax(talloc_tos(),
912 get_pipe_name_from_syntax(talloc_tos(),
914 return setup_bind_nak(p, pkt);
918 DEBUG(5,("api_pipe_bind_req: make response. %d\n", __LINE__));
920 if (pkt->u.bind.assoc_group_id != 0) {
921 assoc_gid = pkt->u.bind.assoc_group_id;
927 * Create the bind response struct.
930 /* If the requested abstract synt uuid doesn't match our client pipe,
931 reject the bind_ack & set the transfer interface synt to all 0's,
932 ver 0 (observed when NT5 attempts to bind to abstract interfaces
934 Needed when adding entries to a DACL from NT5 - SK */
936 if (check_bind_req(p,
937 &pkt->u.bind.ctx_list[0].abstract_syntax,
938 &pkt->u.bind.ctx_list[0].transfer_syntaxes[0],
939 pkt->u.bind.ctx_list[0].context_id)) {
941 bind_ack_ctx.result = 0;
942 bind_ack_ctx.reason = 0;
943 bind_ack_ctx.syntax = pkt->u.bind.ctx_list[0].transfer_syntaxes[0];
945 p->pipe_bound = False;
946 /* Rejection reason: abstract syntax not supported */
947 bind_ack_ctx.result = DCERPC_BIND_PROVIDER_REJECT;
948 bind_ack_ctx.reason = DCERPC_BIND_REASON_ASYNTAX;
949 bind_ack_ctx.syntax = null_ndr_syntax_id;
953 * Check if this is an authenticated bind request.
955 if (pkt->auth_length) {
956 /* Quick length check. Won't catch a bad auth footer,
957 * prevents overrun. */
959 if (pkt->frag_length < RPC_HEADER_LEN +
960 DCERPC_AUTH_TRAILER_LENGTH +
962 DEBUG(0,("api_pipe_bind_req: auth_len (%u) "
963 "too long for fragment %u.\n",
964 (unsigned int)pkt->auth_length,
965 (unsigned int)pkt->frag_length));
970 * Decode the authentication verifier.
972 status = dcerpc_pull_dcerpc_auth(pkt,
973 &pkt->u.bind.auth_info,
974 &auth_info, p->endian);
975 if (!NT_STATUS_IS_OK(status)) {
976 DEBUG(0, ("Unable to unmarshall dcerpc_auth.\n"));
980 auth_type = auth_info.auth_type;
982 /* Work out if we have to sign or seal etc. */
983 switch (auth_info.auth_level) {
984 case DCERPC_AUTH_LEVEL_INTEGRITY:
985 p->auth.auth_level = DCERPC_AUTH_LEVEL_INTEGRITY;
987 case DCERPC_AUTH_LEVEL_PRIVACY:
988 p->auth.auth_level = DCERPC_AUTH_LEVEL_PRIVACY;
990 case DCERPC_AUTH_LEVEL_NONE:
991 p->auth.auth_level = DCERPC_AUTH_LEVEL_NONE;
993 case DCERPC_AUTH_LEVEL_CONNECT:
994 p->auth.auth_level = DCERPC_AUTH_LEVEL_CONNECT;
997 DEBUG(0, ("Unexpected auth level (%u).\n",
998 (unsigned int)auth_info.auth_level ));
1002 switch (auth_type) {
1003 case DCERPC_AUTH_TYPE_NTLMSSP:
1004 if (!pipe_ntlmssp_auth_bind(p, pkt,
1005 &auth_info, &auth_resp)) {
1011 case DCERPC_AUTH_TYPE_SCHANNEL:
1012 if (!pipe_schannel_auth_bind(p, pkt,
1013 &auth_info, &auth_resp)) {
1018 case DCERPC_AUTH_TYPE_SPNEGO:
1019 if (!pipe_spnego_auth_bind(p, pkt,
1020 &auth_info, &auth_resp)) {
1025 case DCERPC_AUTH_TYPE_KRB5:
1026 if (!pipe_gssapi_auth_bind(p, pkt,
1027 &auth_info, &auth_resp)) {
1032 case DCERPC_AUTH_TYPE_NCALRPC_AS_SYSTEM:
1033 if (p->transport == NCALRPC && p->ncalrpc_as_system) {
1034 TALLOC_FREE(p->session_info);
1036 status = make_session_info_system(p,
1038 if (!NT_STATUS_IS_OK(status)) {
1042 auth_resp = data_blob_talloc(pkt,
1046 p->auth.auth_type = DCERPC_AUTH_TYPE_NCALRPC_AS_SYSTEM;
1047 p->pipe_bound = true;
1053 case DCERPC_AUTH_TYPE_NONE:
1057 DEBUG(0, ("Unknown auth type %x requested.\n", auth_type));
1062 if (auth_type == DCERPC_AUTH_TYPE_NONE) {
1063 /* Unauthenticated bind request. */
1064 /* We're finished - no more packets. */
1065 p->auth.auth_type = DCERPC_AUTH_TYPE_NONE;
1066 /* We must set the pipe auth_level here also. */
1067 p->auth.auth_level = DCERPC_AUTH_LEVEL_NONE;
1068 p->pipe_bound = True;
1069 /* The session key was initialized from the SMB
1070 * session in make_internal_rpc_pipe_p */
1073 ZERO_STRUCT(u.bind_ack);
1074 u.bind_ack.max_xmit_frag = RPC_MAX_PDU_FRAG_LEN;
1075 u.bind_ack.max_recv_frag = RPC_MAX_PDU_FRAG_LEN;
1076 u.bind_ack.assoc_group_id = assoc_gid;
1078 /* name has to be \PIPE\xxxxx */
1079 u.bind_ack.secondary_address =
1080 talloc_asprintf(pkt, "\\PIPE\\%s",
1081 rpc_srv_get_pipe_srv_name(&id));
1082 if (!u.bind_ack.secondary_address) {
1083 DEBUG(0, ("Out of memory!\n"));
1086 u.bind_ack.secondary_address_size =
1087 strlen(u.bind_ack.secondary_address) + 1;
1089 u.bind_ack.num_results = 1;
1090 u.bind_ack.ctx_list = &bind_ack_ctx;
1092 /* NOTE: We leave the auth_info empty so we can calculate the padding
1093 * later and then append the auth_info --simo */
1096 * Marshall directly into the outgoing PDU space. We
1097 * must do this as we need to set to the bind response
1098 * header and are never sending more than one PDU here.
1101 status = dcerpc_push_ncacn_packet(p->mem_ctx,
1102 DCERPC_PKT_BIND_ACK,
1103 DCERPC_PFC_FLAG_FIRST |
1104 DCERPC_PFC_FLAG_LAST,
1109 if (!NT_STATUS_IS_OK(status)) {
1110 DEBUG(0, ("Failed to marshall bind_ack packet. (%s)\n",
1111 nt_errstr(status)));
1114 if (auth_resp.length) {
1116 status = dcerpc_push_dcerpc_auth(pkt,
1118 auth_info.auth_level,
1120 1, /* auth_context_id */
1123 if (!NT_STATUS_IS_OK(status)) {
1124 DEBUG(0, ("Marshalling of dcerpc_auth failed.\n"));
1129 /* Now that we have the auth len store it into the right place in
1130 * the dcerpc header */
1131 dcerpc_set_frag_length(&p->out_data.frag,
1132 p->out_data.frag.length + auth_blob.length);
1134 if (auth_blob.length) {
1136 if (!data_blob_append(p->mem_ctx, &p->out_data.frag,
1137 auth_blob.data, auth_blob.length)) {
1138 DEBUG(0, ("Append of auth info failed.\n"));
1144 * Setup the lengths for the initial reply.
1147 p->out_data.data_sent_length = 0;
1148 p->out_data.current_pdu_sent = 0;
1150 TALLOC_FREE(auth_blob.data);
1155 data_blob_free(&p->out_data.frag);
1156 TALLOC_FREE(auth_blob.data);
1157 return setup_bind_nak(p, pkt);
1160 /*******************************************************************
1161 This is the "stage3" response after a bind request and reply.
1162 *******************************************************************/
1164 bool api_pipe_bind_auth3(struct pipes_struct *p, struct ncacn_packet *pkt)
1166 struct dcerpc_auth auth_info;
1167 DATA_BLOB response = data_blob_null;
1168 struct auth_ntlmssp_state *ntlmssp_ctx;
1169 struct spnego_context *spnego_ctx;
1170 struct gse_context *gse_ctx;
1173 DEBUG(5, ("api_pipe_bind_auth3: decode request. %d\n", __LINE__));
1175 if (pkt->auth_length == 0) {
1176 DEBUG(0, ("No auth field sent for bind request!\n"));
1180 /* Ensure there's enough data for an authenticated request. */
1181 if (pkt->frag_length < RPC_HEADER_LEN
1182 + DCERPC_AUTH_TRAILER_LENGTH
1183 + pkt->auth_length) {
1184 DEBUG(0,("api_pipe_ntlmssp_auth_process: auth_len "
1185 "%u is too large.\n",
1186 (unsigned int)pkt->auth_length));
1191 * Decode the authentication verifier response.
1194 status = dcerpc_pull_dcerpc_auth(pkt,
1195 &pkt->u.auth3.auth_info,
1196 &auth_info, p->endian);
1197 if (!NT_STATUS_IS_OK(status)) {
1198 DEBUG(0, ("Failed to unmarshall dcerpc_auth.\n"));
1202 /* We must NEVER look at auth_info->auth_pad_len here,
1203 * as old Samba client code gets it wrong and sends it
1207 if (auth_info.auth_type != p->auth.auth_type) {
1208 DEBUG(0, ("Auth type mismatch! Client sent %d, "
1209 "but auth was started as type %d!\n",
1210 auth_info.auth_type, p->auth.auth_type));
1214 switch (auth_info.auth_type) {
1215 case DCERPC_AUTH_TYPE_NTLMSSP:
1216 ntlmssp_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1217 struct auth_ntlmssp_state);
1218 status = ntlmssp_server_step(ntlmssp_ctx,
1219 pkt, &auth_info.credentials,
1222 case DCERPC_AUTH_TYPE_KRB5:
1223 gse_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1224 struct gse_context);
1225 status = gssapi_server_step(gse_ctx,
1226 pkt, &auth_info.credentials,
1229 case DCERPC_AUTH_TYPE_SPNEGO:
1230 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1231 struct spnego_context);
1232 status = spnego_server_step(spnego_ctx,
1233 pkt, &auth_info.credentials,
1237 DEBUG(0, (__location__ ": incorrect auth type (%u).\n",
1238 (unsigned int)auth_info.auth_type));
1242 if (NT_STATUS_EQUAL(status,
1243 NT_STATUS_MORE_PROCESSING_REQUIRED) ||
1245 DEBUG(0, (__location__ ": This was supposed to be the final "
1246 "leg, but crypto machinery claims a response is "
1247 "needed, aborting auth!\n"));
1248 data_blob_free(&response);
1251 if (!NT_STATUS_IS_OK(status)) {
1252 DEBUG(0, ("Auth failed (%s)\n", nt_errstr(status)));
1256 /* Now verify auth was indeed successful and extract server info */
1257 status = pipe_auth_verify_final(p);
1258 if (!NT_STATUS_IS_OK(status)) {
1259 DEBUG(0, ("Auth Verify failed (%s)\n", nt_errstr(status)));
1267 TALLOC_FREE(p->auth.auth_ctx);
1271 /****************************************************************************
1272 Deal with an alter context call. Can be third part of 3 leg auth request for
1274 ****************************************************************************/
1276 static bool api_pipe_alter_context(struct pipes_struct *p,
1277 struct ncacn_packet *pkt)
1279 struct dcerpc_auth auth_info;
1282 union dcerpc_payload u;
1283 struct dcerpc_ack_ctx bind_ack_ctx;
1284 DATA_BLOB auth_resp = data_blob_null;
1285 DATA_BLOB auth_blob = data_blob_null;
1287 struct auth_ntlmssp_state *ntlmssp_ctx;
1288 struct spnego_context *spnego_ctx;
1289 struct gse_context *gse_ctx;
1291 DEBUG(5,("api_pipe_alter_context: make response. %d\n", __LINE__));
1293 if (pkt->u.bind.assoc_group_id != 0) {
1294 assoc_gid = pkt->u.bind.assoc_group_id;
1300 * Create the bind response struct.
1303 /* If the requested abstract synt uuid doesn't match our client pipe,
1304 reject the bind_ack & set the transfer interface synt to all 0's,
1305 ver 0 (observed when NT5 attempts to bind to abstract interfaces
1307 Needed when adding entries to a DACL from NT5 - SK */
1309 if (check_bind_req(p,
1310 &pkt->u.bind.ctx_list[0].abstract_syntax,
1311 &pkt->u.bind.ctx_list[0].transfer_syntaxes[0],
1312 pkt->u.bind.ctx_list[0].context_id)) {
1314 bind_ack_ctx.result = 0;
1315 bind_ack_ctx.reason = 0;
1316 bind_ack_ctx.syntax = pkt->u.bind.ctx_list[0].transfer_syntaxes[0];
1318 p->pipe_bound = False;
1319 /* Rejection reason: abstract syntax not supported */
1320 bind_ack_ctx.result = DCERPC_BIND_PROVIDER_REJECT;
1321 bind_ack_ctx.reason = DCERPC_BIND_REASON_ASYNTAX;
1322 bind_ack_ctx.syntax = null_ndr_syntax_id;
1326 * Check if this is an authenticated alter context request.
1328 if (pkt->auth_length) {
1329 /* Quick length check. Won't catch a bad auth footer,
1330 * prevents overrun. */
1332 if (pkt->frag_length < RPC_HEADER_LEN +
1333 DCERPC_AUTH_TRAILER_LENGTH +
1335 DEBUG(0,("api_pipe_alter_context: auth_len (%u) "
1336 "too long for fragment %u.\n",
1337 (unsigned int)pkt->auth_length,
1338 (unsigned int)pkt->frag_length ));
1342 status = dcerpc_pull_dcerpc_auth(pkt,
1343 &pkt->u.bind.auth_info,
1344 &auth_info, p->endian);
1345 if (!NT_STATUS_IS_OK(status)) {
1346 DEBUG(0, ("Unable to unmarshall dcerpc_auth.\n"));
1350 /* We can only finish if the pipe is unbound for now */
1351 if (p->pipe_bound) {
1352 DEBUG(0, (__location__ ": Pipe already bound, "
1353 "Altering Context not yet supported!\n"));
1357 if (auth_info.auth_type != p->auth.auth_type) {
1358 DEBUG(0, ("Auth type mismatch! Client sent %d, "
1359 "but auth was started as type %d!\n",
1360 auth_info.auth_type, p->auth.auth_type));
1365 switch (auth_info.auth_type) {
1366 case DCERPC_AUTH_TYPE_SPNEGO:
1367 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1368 struct spnego_context);
1369 status = spnego_server_step(spnego_ctx,
1371 &auth_info.credentials,
1375 case DCERPC_AUTH_TYPE_KRB5:
1376 gse_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1377 struct gse_context);
1378 status = gssapi_server_step(gse_ctx,
1380 &auth_info.credentials,
1383 case DCERPC_AUTH_TYPE_NTLMSSP:
1384 ntlmssp_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1385 struct auth_ntlmssp_state);
1386 status = ntlmssp_server_step(ntlmssp_ctx,
1388 &auth_info.credentials,
1393 DEBUG(3, (__location__ ": Usupported auth type (%d) "
1394 "in alter-context call\n",
1395 auth_info.auth_type));
1399 if (NT_STATUS_IS_OK(status)) {
1400 /* third leg of auth, verify auth info */
1401 status = pipe_auth_verify_final(p);
1402 if (!NT_STATUS_IS_OK(status)) {
1403 DEBUG(0, ("Auth Verify failed (%s)\n",
1404 nt_errstr(status)));
1407 } else if (NT_STATUS_EQUAL(status,
1408 NT_STATUS_MORE_PROCESSING_REQUIRED)) {
1409 DEBUG(10, ("More auth legs required.\n"));
1411 DEBUG(0, ("Auth step returned an error (%s)\n",
1412 nt_errstr(status)));
1417 ZERO_STRUCT(u.alter_resp);
1418 u.alter_resp.max_xmit_frag = RPC_MAX_PDU_FRAG_LEN;
1419 u.alter_resp.max_recv_frag = RPC_MAX_PDU_FRAG_LEN;
1420 u.alter_resp.assoc_group_id = assoc_gid;
1422 /* secondary address CAN be NULL
1423 * as the specs say it's ignored.
1424 * It MUST be NULL to have the spoolss working.
1426 u.alter_resp.secondary_address = "";
1427 u.alter_resp.secondary_address_size = 1;
1429 u.alter_resp.num_results = 1;
1430 u.alter_resp.ctx_list = &bind_ack_ctx;
1432 /* NOTE: We leave the auth_info empty so we can calculate the padding
1433 * later and then append the auth_info --simo */
1436 * Marshall directly into the outgoing PDU space. We
1437 * must do this as we need to set to the bind response
1438 * header and are never sending more than one PDU here.
1441 status = dcerpc_push_ncacn_packet(p->mem_ctx,
1442 DCERPC_PKT_ALTER_RESP,
1443 DCERPC_PFC_FLAG_FIRST |
1444 DCERPC_PFC_FLAG_LAST,
1449 if (!NT_STATUS_IS_OK(status)) {
1450 DEBUG(0, ("Failed to marshall bind_ack packet. (%s)\n",
1451 nt_errstr(status)));
1454 if (auth_resp.length) {
1456 /* Work out any padding needed before the auth footer. */
1457 pad_len = p->out_data.frag.length % SERVER_NDR_PADDING_SIZE;
1459 pad_len = SERVER_NDR_PADDING_SIZE - pad_len;
1460 DEBUG(10, ("auth pad_len = %u\n",
1461 (unsigned int)pad_len));
1464 status = dcerpc_push_dcerpc_auth(pkt,
1465 auth_info.auth_type,
1466 auth_info.auth_level,
1468 1, /* auth_context_id */
1471 if (!NT_STATUS_IS_OK(status)) {
1472 DEBUG(0, ("Marshalling of dcerpc_auth failed.\n"));
1477 /* Now that we have the auth len store it into the right place in
1478 * the dcerpc header */
1479 dcerpc_set_frag_length(&p->out_data.frag,
1480 p->out_data.frag.length +
1481 pad_len + auth_blob.length);
1483 if (auth_resp.length) {
1485 char pad[SERVER_NDR_PADDING_SIZE];
1486 memset(pad, '\0', SERVER_NDR_PADDING_SIZE);
1487 if (!data_blob_append(p->mem_ctx,
1490 DEBUG(0, ("api_pipe_bind_req: failed to add "
1491 "%u bytes of pad data.\n",
1492 (unsigned int)pad_len));
1497 if (!data_blob_append(p->mem_ctx, &p->out_data.frag,
1498 auth_blob.data, auth_blob.length)) {
1499 DEBUG(0, ("Append of auth info failed.\n"));
1505 * Setup the lengths for the initial reply.
1508 p->out_data.data_sent_length = 0;
1509 p->out_data.current_pdu_sent = 0;
1511 TALLOC_FREE(auth_blob.data);
1516 data_blob_free(&p->out_data.frag);
1517 TALLOC_FREE(auth_blob.data);
1518 return setup_bind_nak(p, pkt);
1521 /****************************************************************************
1522 Find the set of RPC functions associated with this context_id
1523 ****************************************************************************/
1525 static PIPE_RPC_FNS* find_pipe_fns_by_context( PIPE_RPC_FNS *list, uint32 context_id )
1527 PIPE_RPC_FNS *fns = NULL;
1530 DEBUG(0,("find_pipe_fns_by_context: ERROR! No context list for pipe!\n"));
1534 for (fns=list; fns; fns=fns->next ) {
1535 if ( fns->context_id == context_id )
1541 static bool api_rpcTNP(struct pipes_struct *p, struct ncacn_packet *pkt,
1542 const struct api_struct *api_rpc_cmds, int n_cmds);
1544 /****************************************************************************
1545 Find the correct RPC function to call for this request.
1546 If the pipe is authenticated then become the correct UNIX user
1547 before doing the call.
1548 ****************************************************************************/
1550 static bool api_pipe_request(struct pipes_struct *p,
1551 struct ncacn_packet *pkt)
1554 bool changed_user = False;
1555 PIPE_RPC_FNS *pipe_fns;
1557 if (p->pipe_bound &&
1558 ((p->auth.auth_type == DCERPC_AUTH_TYPE_NTLMSSP) ||
1559 (p->auth.auth_type == DCERPC_AUTH_TYPE_KRB5) ||
1560 (p->auth.auth_type == DCERPC_AUTH_TYPE_SPNEGO))) {
1561 if(!become_authenticated_pipe_user(p)) {
1562 data_blob_free(&p->out_data.rdata);
1565 changed_user = True;
1568 DEBUG(5, ("Requested \\PIPE\\%s\n",
1569 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
1571 /* get the set of RPC functions for this context */
1573 pipe_fns = find_pipe_fns_by_context(p->contexts,
1574 pkt->u.request.context_id);
1577 TALLOC_CTX *frame = talloc_stackframe();
1578 ret = api_rpcTNP(p, pkt, pipe_fns->cmds, pipe_fns->n_cmds);
1582 DEBUG(0, ("No rpc function table associated with context "
1583 "[%d] on pipe [%s]\n",
1584 pkt->u.request.context_id,
1585 get_pipe_name_from_syntax(talloc_tos(),
1590 unbecome_authenticated_pipe_user();
1596 /*******************************************************************
1597 Calls the underlying RPC function for a named pipe.
1598 ********************************************************************/
1600 static bool api_rpcTNP(struct pipes_struct *p, struct ncacn_packet *pkt,
1601 const struct api_struct *api_rpc_cmds, int n_cmds)
1606 /* interpret the command */
1607 DEBUG(4,("api_rpcTNP: %s op 0x%x - ",
1608 get_pipe_name_from_syntax(talloc_tos(), &p->syntax),
1609 pkt->u.request.opnum));
1611 if (DEBUGLEVEL >= 50) {
1613 slprintf(name, sizeof(name)-1, "in_%s",
1614 get_pipe_name_from_syntax(talloc_tos(), &p->syntax));
1615 dump_pdu_region(name, pkt->u.request.opnum,
1616 &p->in_data.data, 0,
1617 p->in_data.data.length);
1620 for (fn_num = 0; fn_num < n_cmds; fn_num++) {
1621 if (api_rpc_cmds[fn_num].opnum == pkt->u.request.opnum &&
1622 api_rpc_cmds[fn_num].fn != NULL) {
1623 DEBUG(3, ("api_rpcTNP: rpc command: %s\n",
1624 api_rpc_cmds[fn_num].name));
1629 if (fn_num == n_cmds) {
1631 * For an unknown RPC just return a fault PDU but
1632 * return True to allow RPC's on the pipe to continue
1633 * and not put the pipe into fault state. JRA.
1635 DEBUG(4, ("unknown\n"));
1636 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
1640 offset1 = p->out_data.rdata.length;
1642 DEBUG(6, ("api_rpc_cmds[%d].fn == %p\n",
1643 fn_num, api_rpc_cmds[fn_num].fn));
1644 /* do the actual command */
1645 if(!api_rpc_cmds[fn_num].fn(p)) {
1646 DEBUG(0,("api_rpcTNP: %s: %s failed.\n",
1647 get_pipe_name_from_syntax(talloc_tos(), &p->syntax),
1648 api_rpc_cmds[fn_num].name));
1649 data_blob_free(&p->out_data.rdata);
1653 if (p->bad_handle_fault_state) {
1654 DEBUG(4,("api_rpcTNP: bad handle fault return.\n"));
1655 p->bad_handle_fault_state = False;
1656 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_CONTEXT_MISMATCH));
1660 if (p->rng_fault_state) {
1661 DEBUG(4, ("api_rpcTNP: rng fault return\n"));
1662 p->rng_fault_state = False;
1663 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
1667 if (DEBUGLEVEL >= 50) {
1669 slprintf(name, sizeof(name)-1, "out_%s",
1670 get_pipe_name_from_syntax(talloc_tos(), &p->syntax));
1671 dump_pdu_region(name, pkt->u.request.opnum,
1672 &p->out_data.rdata, offset1,
1673 p->out_data.rdata.length);
1676 DEBUG(5,("api_rpcTNP: called %s successfully\n",
1677 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
1679 /* Check for buffer underflow in rpc parsing */
1680 if ((DEBUGLEVEL >= 10) &&
1681 (pkt->frag_length < p->in_data.data.length)) {
1682 DEBUG(10, ("api_rpcTNP: rpc input buffer underflow (parse error?)\n"));
1683 dump_data(10, p->in_data.data.data + pkt->frag_length,
1684 p->in_data.data.length - pkt->frag_length);
1690 /****************************************************************************
1691 Initialise an outgoing packet.
1692 ****************************************************************************/
1694 static bool pipe_init_outgoing_data(struct pipes_struct *p)
1696 output_data *o_data = &p->out_data;
1698 /* Reset the offset counters. */
1699 o_data->data_sent_length = 0;
1700 o_data->current_pdu_sent = 0;
1702 data_blob_free(&o_data->frag);
1704 /* Free any memory in the current return data buffer. */
1705 data_blob_free(&o_data->rdata);
1710 /****************************************************************************
1711 Sets the fault state on incoming packets.
1712 ****************************************************************************/
1714 void set_incoming_fault(struct pipes_struct *p)
1716 data_blob_free(&p->in_data.data);
1717 p->in_data.pdu_needed_len = 0;
1718 p->in_data.pdu.length = 0;
1719 p->fault_state = True;
1720 DEBUG(10, ("set_incoming_fault: Setting fault state on pipe %s\n",
1721 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
1724 static NTSTATUS dcesrv_auth_request(struct pipe_auth_data *auth,
1725 struct ncacn_packet *pkt,
1729 size_t hdr_size = DCERPC_REQUEST_LENGTH;
1732 DEBUG(10, ("Checking request auth.\n"));
1734 if (pkt->pfc_flags & DCERPC_PFC_FLAG_OBJECT_UUID) {
1738 /* in case of sealing this function will unseal the data in place */
1739 status = dcerpc_check_auth(auth, pkt,
1740 &pkt->u.request.stub_and_verifier,
1743 if (!NT_STATUS_IS_OK(status)) {
1748 /* remove padding and auth trailer,
1749 * this way the caller will get just the data */
1750 if (pkt->auth_length) {
1751 size_t trail_len = pad_len
1752 + DCERPC_AUTH_TRAILER_LENGTH
1754 if (pkt->u.request.stub_and_verifier.length < trail_len) {
1755 return NT_STATUS_INFO_LENGTH_MISMATCH;
1757 pkt->u.request.stub_and_verifier.length -= trail_len;
1760 return NT_STATUS_OK;
1763 /****************************************************************************
1764 Processes a request pdu. This will do auth processing if needed, and
1765 appends the data into the complete stream if the LAST flag is not set.
1766 ****************************************************************************/
1768 static bool process_request_pdu(struct pipes_struct *p, struct ncacn_packet *pkt)
1773 if (!p->pipe_bound) {
1774 DEBUG(0,("process_request_pdu: rpc request with no bind.\n"));
1775 set_incoming_fault(p);
1779 /* Store the opnum */
1780 p->opnum = pkt->u.request.opnum;
1782 status = dcesrv_auth_request(&p->auth, pkt, &p->in_data.pdu);
1783 if (!NT_STATUS_IS_OK(status)) {
1784 DEBUG(0, ("Failed to check packet auth. (%s)\n",
1785 nt_errstr(status)));
1786 set_incoming_fault(p);
1790 data = pkt->u.request.stub_and_verifier;
1793 * Check the data length doesn't go over the 15Mb limit.
1794 * increased after observing a bug in the Windows NT 4.0 SP6a
1795 * spoolsv.exe when the response to a GETPRINTERDRIVER2 RPC
1796 * will not fit in the initial buffer of size 0x1068 --jerry 22/01/2002
1799 if (p->in_data.data.length + data.length > MAX_RPC_DATA_SIZE) {
1800 DEBUG(0, ("process_request_pdu: "
1801 "rpc data buffer too large (%u) + (%u)\n",
1802 (unsigned int)p->in_data.data.length,
1803 (unsigned int)data.length));
1804 set_incoming_fault(p);
1809 * Append the data portion into the buffer and return.
1813 if (!data_blob_append(p->mem_ctx, &p->in_data.data,
1814 data.data, data.length)) {
1815 DEBUG(0, ("Unable to append data size %u "
1816 "to parse buffer of size %u.\n",
1817 (unsigned int)data.length,
1818 (unsigned int)p->in_data.data.length));
1819 set_incoming_fault(p);
1824 if (pkt->pfc_flags & DCERPC_PFC_FLAG_LAST) {
1827 * Ok - we finally have a complete RPC stream.
1828 * Call the rpc command to process it.
1832 * Process the complete data stream here.
1834 if (pipe_init_outgoing_data(p)) {
1835 ret = api_pipe_request(p, pkt);
1844 /****************************************************************************
1845 Processes a finished PDU stored in p->in_data.pdu.
1846 ****************************************************************************/
1848 void process_complete_pdu(struct pipes_struct *p)
1850 struct ncacn_packet *pkt = NULL;
1854 if(p->fault_state) {
1855 DEBUG(10,("process_complete_pdu: pipe %s in fault state.\n",
1856 get_pipe_name_from_syntax(talloc_tos(), &p->syntax)));
1860 pkt = talloc(p->mem_ctx, struct ncacn_packet);
1862 DEBUG(0, ("Out of memory!\n"));
1867 * Ensure we're using the corrent endianness for both the
1868 * RPC header flags and the raw data we will be reading from.
1870 if (dcerpc_get_endian_flag(&p->in_data.pdu) & DCERPC_DREP_LE) {
1871 p->endian = RPC_LITTLE_ENDIAN;
1873 p->endian = RPC_BIG_ENDIAN;
1875 DEBUG(10, ("PDU is in %s Endian format!\n", p->endian?"Big":"Little"));
1877 status = dcerpc_pull_ncacn_packet(pkt, &p->in_data.pdu,
1879 if (!NT_STATUS_IS_OK(status)) {
1880 DEBUG(0, ("Failed to unmarshal rpc packet: %s!\n",
1881 nt_errstr(status)));
1885 /* Store the call_id */
1886 p->call_id = pkt->call_id;
1888 DEBUG(10, ("Processing packet type %d\n", (int)pkt->ptype));
1890 switch (pkt->ptype) {
1891 case DCERPC_PKT_REQUEST:
1892 reply = process_request_pdu(p, pkt);
1895 case DCERPC_PKT_PING: /* CL request - ignore... */
1896 DEBUG(0, ("process_complete_pdu: Error. "
1897 "Connectionless packet type %d received on "
1898 "pipe %s.\n", (int)pkt->ptype,
1899 get_pipe_name_from_syntax(talloc_tos(),
1903 case DCERPC_PKT_RESPONSE: /* No responses here. */
1904 DEBUG(0, ("process_complete_pdu: Error. "
1905 "DCERPC_PKT_RESPONSE received from client "
1907 get_pipe_name_from_syntax(talloc_tos(),
1911 case DCERPC_PKT_FAULT:
1912 case DCERPC_PKT_WORKING:
1913 /* CL request - reply to a ping when a call in process. */
1914 case DCERPC_PKT_NOCALL:
1915 /* CL - server reply to a ping call. */
1916 case DCERPC_PKT_REJECT:
1917 case DCERPC_PKT_ACK:
1918 case DCERPC_PKT_CL_CANCEL:
1919 case DCERPC_PKT_FACK:
1920 case DCERPC_PKT_CANCEL_ACK:
1921 DEBUG(0, ("process_complete_pdu: Error. "
1922 "Connectionless packet type %u received on "
1923 "pipe %s.\n", (unsigned int)pkt->ptype,
1924 get_pipe_name_from_syntax(talloc_tos(),
1928 case DCERPC_PKT_BIND:
1930 * We assume that a pipe bind is only in one pdu.
1932 if (pipe_init_outgoing_data(p)) {
1933 reply = api_pipe_bind_req(p, pkt);
1937 case DCERPC_PKT_BIND_ACK:
1938 case DCERPC_PKT_BIND_NAK:
1939 DEBUG(0, ("process_complete_pdu: Error. "
1940 "DCERPC_PKT_BINDACK/DCERPC_PKT_BINDNACK "
1941 "packet type %u received on pipe %s.\n",
1942 (unsigned int)pkt->ptype,
1943 get_pipe_name_from_syntax(talloc_tos(),
1948 case DCERPC_PKT_ALTER:
1950 * We assume that a pipe bind is only in one pdu.
1952 if (pipe_init_outgoing_data(p)) {
1953 reply = api_pipe_alter_context(p, pkt);
1957 case DCERPC_PKT_ALTER_RESP:
1958 DEBUG(0, ("process_complete_pdu: Error. "
1959 "DCERPC_PKT_ALTER_RESP on pipe %s: "
1960 "Should only be server -> client.\n",
1961 get_pipe_name_from_syntax(talloc_tos(),
1965 case DCERPC_PKT_AUTH3:
1967 * The third packet in an auth exchange.
1969 if (pipe_init_outgoing_data(p)) {
1970 reply = api_pipe_bind_auth3(p, pkt);
1974 case DCERPC_PKT_SHUTDOWN:
1975 DEBUG(0, ("process_complete_pdu: Error. "
1976 "DCERPC_PKT_SHUTDOWN on pipe %s: "
1977 "Should only be server -> client.\n",
1978 get_pipe_name_from_syntax(talloc_tos(),
1982 case DCERPC_PKT_CO_CANCEL:
1983 /* For now just free all client data and continue
1985 DEBUG(3,("process_complete_pdu: DCERPC_PKT_CO_CANCEL."
1986 " Abandoning rpc call.\n"));
1987 /* As we never do asynchronous RPC serving, we can
1988 * never cancel a call (as far as I know).
1989 * If we ever did we'd have to send a cancel_ack reply.
1990 * For now, just free all client data and continue
1996 /* Enable this if we're doing async rpc. */
1997 /* We must check the outstanding callid matches. */
1998 if (pipe_init_outgoing_data(p)) {
1999 /* Send a cancel_ack PDU reply. */
2000 /* We should probably check the auth-verifier here. */
2001 reply = setup_cancel_ack_reply(p, pkt);
2006 case DCERPC_PKT_ORPHANED:
2007 /* We should probably check the auth-verifier here.
2008 * For now just free all client data and continue
2010 DEBUG(3, ("process_complete_pdu: DCERPC_PKT_ORPHANED."
2011 " Abandoning rpc call.\n"));
2016 DEBUG(0, ("process_complete_pdu: "
2017 "Unknown rpc type = %u received.\n",
2018 (unsigned int)pkt->ptype));
2024 DEBUG(3,("process_complete_pdu: DCE/RPC fault sent on "
2025 "pipe %s\n", get_pipe_name_from_syntax(talloc_tos(),
2027 set_incoming_fault(p);
2028 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
2032 * Reset the lengths. We're ready for a new pdu.
2034 TALLOC_FREE(p->in_data.pdu.data);
2035 p->in_data.pdu_needed_len = 0;
2036 p->in_data.pdu.length = 0;