2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
29 /* logged when starting the various Samba daemons */
30 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2011"
33 #if defined(LARGE_SMB_OFF_T)
34 #define BUFFER_SIZE (128*1024)
35 #else /* no large readwrite possible */
36 #define BUFFER_SIZE (0xFFFF)
39 #define SAFETY_MARGIN 1024
40 #define LARGE_WRITEX_HDR_SIZE 65
43 #define DGRAM_PORT 138
46 #define SMB_PORTS "445 139"
48 #define Undefined (-1)
56 #ifndef DEF_CREATE_MASK
57 #define DEF_CREATE_MASK (0755)
60 /* string manipulation flags - see clistr.c and srvstr.c */
61 #define STR_TERMINATE 1
65 #define STR_NOALIGN 16
66 #define STR_TERMINATE_ASCII 128
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 enum smb_read_errors {
80 SMB_WRITE_ERROR, /* This error code can go into the client smb_rw_error. */
83 SMB_DO_NOT_DO_TDIS, /* cli_close_connection() check for this when smbfs wants to keep tree connected */
87 #define DIR_STRUCT_SIZE 43
89 /* these define the attribute byte as seen by DOS */
90 #define aRONLY (1L<<0) /* 0x01 */
91 #define aHIDDEN (1L<<1) /* 0x02 */
92 #define aSYSTEM (1L<<2) /* 0x04 */
93 #define aVOLID (1L<<3) /* 0x08 */
94 #define aDIR (1L<<4) /* 0x10 */
95 #define aARCH (1L<<5) /* 0x20 */
106 #define DOS_OPEN_RDONLY 0
107 #define DOS_OPEN_WRONLY 1
108 #define DOS_OPEN_RDWR 2
109 #define DOS_OPEN_EXEC 3
110 #define DOS_OPEN_FCB 0xF
112 /* define shifts and masks for share and open modes. */
113 #define OPENX_MODE_MASK 0xF
114 #define DENY_MODE_SHIFT 4
115 #define DENY_MODE_MASK 0x7
116 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
117 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
119 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
121 /* Sync on open file (not sure if used anymore... ?) */
122 #define FILE_SYNC_OPENMODE (1<<14)
123 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
125 /* open disposition values */
126 #define OPENX_FILE_EXISTS_FAIL 0
127 #define OPENX_FILE_EXISTS_OPEN 1
128 #define OPENX_FILE_EXISTS_TRUNCATE 2
130 /* mask for open disposition. */
131 #define OPENX_FILE_OPEN_MASK 0x3
133 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
134 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
136 /* The above can be OR'ed with... */
137 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
138 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
140 typedef union unid_t {
145 /* pipe string names */
148 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
151 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
153 #define LOOKUP_NAME_NONE 0x00000000
154 #define LOOKUP_NAME_ISOLATED 0x00000001 /* Look up unqualified names */
155 #define LOOKUP_NAME_REMOTE 0x00000002 /* Ask others */
156 #define LOOKUP_NAME_GROUP 0x00000004 /* (unused) This is a NASTY hack for
157 valid users = @foo where foo also
158 exists in as user. */
159 #define LOOKUP_NAME_NO_NSS 0x00000008 /* no NSS calls to avoid
160 winbind recursions */
161 #define LOOKUP_NAME_BUILTIN 0x00000010 /* builtin names */
162 #define LOOKUP_NAME_WKN 0x00000020 /* well known names */
163 #define LOOKUP_NAME_DOMAIN 0x00000040 /* only lookup own domain */
164 #define LOOKUP_NAME_LOCAL (LOOKUP_NAME_ISOLATED\
165 |LOOKUP_NAME_BUILTIN\
168 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED\
170 |LOOKUP_NAME_BUILTIN\
174 #include "librpc/gen_ndr/epmapper.h"
175 #include "librpc/gen_ndr/dcerpc.h"
176 #include "librpc/gen_ndr/security.h"
178 struct lsa_dom_info {
186 struct lsa_name_info {
188 enum lsa_SidType type;
194 * The complete list of SIDS belonging to this user.
195 * Created when a vuid is registered.
196 * The definition of the user_sids array is as follows :
198 * token->user_sids[0] = primary user SID.
199 * token->user_sids[1] = primary group SID.
200 * token->user_sids[2..num_sids] = supplementary group SIDS.
203 #define PRIMARY_USER_SID_INDEX 0
204 #define PRIMARY_GROUP_SID_INDEX 1
206 typedef struct unix_user_token {
213 typedef struct write_cache {
224 uint64_t position_information;
226 uint32 private_options; /* NT Create options, but we only look at
227 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
228 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB and
229 * NTCREATEX_OPTIONS_PRIVATE_DELETE_ON_CLOSE
230 * for print files *only*, where
231 * DELETE_ON_CLOSE is not stored in the share
234 unsigned long gen_id;
238 struct share_mode_entry;
242 struct rpc_cli_smbd_conn;
243 struct fncall_context;
245 struct vfs_fsp_data {
246 struct vfs_fsp_data *next;
247 struct vfs_handle_struct *owner;
248 void (*destroy)(void *p_data);
250 /* NOTE: This structure contains four pointers so that we can guarantee
251 * that the end of the structure is always both 4-byte and 8-byte aligned.
255 /* the basic packet size, assuming no words or bytes */
258 struct notify_change {
263 struct notify_mid_map;
266 struct notify_change_request;
267 struct sys_notify_backend;
268 struct sys_notify_context {
269 struct event_context *ev;
270 struct connection_struct *conn;
271 void *private_data; /* For use by the system backend */
274 struct notify_change_buf {
276 * If no requests are pending, changes are queued here. Simple array,
281 * num_changes == -1 means that we have got a catch-all change, when
282 * asked we just return NT_STATUS_OK without specific changes.
285 struct notify_change *changes;
288 * If no changes are around requests are queued here. Using a linked
289 * list, because we have to append at the end and delete from the top.
291 struct notify_change_request *requests;
294 struct print_file_data {
298 struct policy_handle handle;
303 typedef struct files_struct {
304 struct files_struct *next, *prev;
306 struct connection_struct *conn;
307 struct fd_handle *fh;
308 unsigned int num_smb_operations;
309 struct file_id file_id;
310 uint64_t initial_allocation_size; /* Faked up initial allocation on disk. */
315 struct timeval open_time;
316 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
317 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
319 bool update_write_time_triggered;
320 struct timed_event *update_write_time_event;
321 bool update_write_time_on_close;
322 struct timespec close_write_time;
323 bool write_time_forced;
326 int sent_oplock_break;
327 struct timed_event *oplock_timeout;
328 struct lock_struct last_lock_failure;
329 int current_lock_count; /* Count the number of outstanding locks and pending locks. */
331 struct share_mode_entry *pending_break_messages;
332 int num_pending_break_messages;
339 bool aio_write_behind;
341 bool initial_delete_on_close; /* Only set at NTCreateX if file was created. */
342 bool delete_on_close;
345 struct smb_filename *fsp_name;
346 uint32_t name_hash; /* Jenkins hash of full pathname. */
348 struct vfs_fsp_data *vfs_extension;
349 struct fake_file_handle *fake_file_handle;
351 struct notify_change_buf *notify;
353 struct files_struct *base_fsp; /* placeholder for delete on close */
356 * Read-only cached brlock record, thrown away when the
357 * brlock.tdb seqnum changes. This avoids fetching data from
358 * the brlock.tdb on every read/write call.
361 struct byte_range_lock *brlock_rec;
363 struct dptr_struct *dptr;
365 /* if not NULL, means this is a print file */
366 struct print_file_data *print_file;
370 #include "ntquotas.h"
371 #include "sysquotas.h"
373 struct client_address {
374 char addr[INET6_ADDRSTRLEN];
378 struct vuid_cache_entry {
379 struct auth_serversupplied_info *server_info;
385 unsigned int next_entry;
386 struct vuid_cache_entry array[VUID_CACHE_SIZE];
392 } name_compare_entry;
395 struct trans_state *next, *prev;
399 uint32 max_param_return;
400 uint32 max_data_return;
401 uint32 max_setup_return;
403 uint8 cmd; /* SMBtrans or SMBtrans2 */
405 char *name; /* for trans requests */
406 uint16 call; /* for trans2 and nttrans requests */
408 bool close_on_completion;
411 unsigned int setup_count;
414 size_t received_data;
415 size_t received_param;
425 * Info about an alternate data stream
428 struct stream_struct {
430 SMB_OFF_T alloc_size;
434 /* Include VFS stuff */
436 #include "smb_acls.h"
439 struct dfree_cached_info {
440 time_t last_dfree_time;
449 struct share_params {
453 struct share_iterator {
457 typedef struct connection_struct {
458 struct connection_struct *next, *prev;
459 struct smbd_server_connection *sconn; /* can be NULL */
460 unsigned cnum; /* an index passed over the wire */
461 struct share_params *params;
463 struct vuid_cache vuid_cache;
466 bool read_only; /* Attributes for the current user of the share. */
467 /* Does this filesystem honor
468 sub second timestamps on files
469 and directories when setting time ? */
470 enum timestamp_set_resolution ts_res;
474 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
477 * This represents the user information on this connection. Depending
478 * on the vuid using this tid, this might change per SMB request.
480 struct auth_serversupplied_info *server_info;
483 * If the "force group" parameter is set, this is the primary gid that
484 * may be used in the users token, depending on the vuid using this tid.
486 gid_t force_group_gid;
488 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
491 time_t lastused_count;
494 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
498 /* Semantics requested by the client or forced by the server config. */
501 bool short_case_preserve;
503 /* Semantics provided by the underlying filesystem. */
505 /* Device number of the directory of the share mount.
506 Used to ensure unique FileIndex returns. */
507 SMB_DEV_T base_share_dev;
509 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
510 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
511 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
512 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
513 struct dfree_cached_info *dfree_info;
514 struct trans_state *pending_trans;
515 struct notify_context *notify_ctx;
517 struct rpc_pipe_client *spoolss_pipe;
521 struct current_user {
522 connection_struct *conn;
525 struct security_token *nt_user_token;
528 struct smbd_smb2_request;
534 uint64_t mid; /* For compatibility with SMB2. */
545 * Async handling in the main smb processing loop is directed by
546 * outbuf: reply_xxx routines indicate sync behaviour by putting their
547 * reply into "outbuf". If they leave it as NULL, they take of it
548 * themselves, possibly later.
550 * If async handling is wanted, the reply_xxx routine must make sure
551 * that it talloc_move()s the smb_req somewhere else.
557 connection_struct *conn;
558 struct smbd_server_connection *sconn;
559 struct smb_perfcount_data pcd;
562 * Chained request handling
564 struct files_struct *chain_fsp;
567 * Here we collect the outbufs from the chain handlers
569 uint8_t *chain_outbuf;
572 * state information for async smb handling
579 * Back pointer to smb2 request.
581 struct smbd_smb2_request *smb2req;
584 /* Defines for the sent_oplock_break field above. */
585 #define NO_BREAK_SENT 0
586 #define BREAK_TO_NONE_SENT 1
587 #define LEVEL_II_BREAK_SENT 2
590 fstring smb_name; /* user name from the client */
591 fstring unix_name; /* unix user name of a validated user */
592 fstring domain; /* domain that the client specified */
595 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
609 LPQ_USER_INTERVENTION,
611 /* smbd is dooing the file spooling before passing control to spoolss */
615 typedef struct _print_queue_struct {
616 int job; /* normally the UNIX jobid -- see note in
617 printing.c:traverse_fn_delete() */
625 } print_queue_struct;
627 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
633 } print_status_struct;
635 /* used for server information: client, nameserv and ipc */
636 struct server_info_struct {
640 fstring domain; /* used ONLY in ipc.c NOT namework.c */
641 bool server_added; /* used ONLY in ipc.c NOT namework.c */
644 /* used for network interfaces */
646 struct interface *next, *prev;
649 struct sockaddr_storage ip;
650 struct sockaddr_storage netmask;
651 struct sockaddr_storage bcast;
654 /* Internal message queue for deferred opens. */
655 struct pending_message_list {
656 struct pending_message_list *next, *prev;
657 struct timeval request_time; /* When was this first issued? */
658 struct timed_event *te;
659 struct smb_perfcount_data pcd;
664 DATA_BLOB private_data;
667 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
669 /* struct returned by get_share_modes */
670 struct share_mode_entry {
671 struct server_id pid;
672 uint64_t op_mid; /* For compatibility with SMB2 opens. */
674 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
675 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
676 uint32 private_options; /* NT Create options, but we only look at
677 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
678 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
679 * smbstatus and swat */
682 unsigned long share_file_id;
683 uint32 uid; /* uid of file opener. */
684 uint16 flags; /* See SHARE_MODE_XX above. */
685 uint32_t name_hash; /* Jenkins hash of full pathname. */
688 /* oplock break message definition - linearization of share_mode_entry.
691 0 struct server_id pid 4
694 14 uint32 access_mask 4
695 18 uint32 share_access 4
696 22 uint32 private_options 4
698 30 uint32 time usec 4
699 34 uint64 dev 8 bytes
700 42 uint64 inode 8 bytes
701 50 uint64 extid 8 bytes
702 58 unsigned long file_id 4 bytes
703 62 uint32 uid 4 bytes
704 66 uint16 flags 2 bytes
705 68 uint32 name_hash 4 bytes
710 #define OP_BREAK_MSG_PID_OFFSET 0
711 #define OP_BREAK_MSG_MID_OFFSET 4
712 #define OP_BREAK_MSG_OP_TYPE_OFFSET 12
713 #define OP_BREAK_MSG_ACCESS_MASK_OFFSET 14
714 #define OP_BREAK_MSG_SHARE_ACCESS_OFFSET 18
715 #define OP_BREAK_MSG_PRIV_OFFSET 22
716 #define OP_BREAK_MSG_TIME_SEC_OFFSET 26
717 #define OP_BREAK_MSG_TIME_USEC_OFFSET 30
718 #define OP_BREAK_MSG_DEV_OFFSET 34
719 #define OP_BREAK_MSG_INO_OFFSET 42
720 #define OP_BREAK_MSG_EXTID_OFFSET 50
721 #define OP_BREAK_MSG_FILE_ID_OFFSET 58
722 #define OP_BREAK_MSG_UID_OFFSET 62
723 #define OP_BREAK_MSG_FLAGS_OFFSET 66
724 #define OP_BREAK_MSG_NAME_HASH_OFFSET 68
726 #ifdef CLUSTER_SUPPORT
727 #define OP_BREAK_MSG_VNN_OFFSET 72
728 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 76
730 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 72
733 struct delete_token_list {
734 struct delete_token_list *next, *prev;
736 UNIX_USER_TOKEN *delete_token;
739 struct share_mode_lock {
740 const char *servicepath; /* canonicalized. */
741 const char *base_name;
742 const char *stream_name;
745 struct share_mode_entry *share_modes;
746 struct delete_token_list *delete_tokens;
747 struct timespec old_write_time;
748 struct timespec changed_write_time;
751 struct db_record *record;
755 * Internal structure of locking.tdb share mode db.
756 * Used by locking.c and libsmbsharemodes.c
759 struct locking_data {
762 int num_share_mode_entries;
763 struct timespec old_write_time;
764 struct timespec changed_write_time;
765 uint32 num_delete_token_entries;
767 struct share_mode_entry dummy; /* Needed for alignment. */
769 /* The following four entries are implicit
771 (1) struct share_mode_entry modes[num_share_mode_entries];
773 (2) A num_delete_token_entries of structs {
774 uint32_t len_delete_token;
775 char unix_token[len_delete_token] (divisible by 4).
778 (3) char share_name[];
779 (4) char file_name[];
783 /* Used to store pipe open records for NetFileEnum() */
785 struct pipe_open_rec {
786 struct server_id pid;
793 #define NT_HASH_LEN 16
794 #define LM_HASH_LEN 16
796 /* Password history contants. */
797 #define PW_HISTORY_SALT_LEN 16
798 #define SALTED_MD5_HASH_LEN 16
799 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
800 #define MAX_PW_HISTORY_LEN 24
803 * Flags for local user manipulation.
806 #define LOCAL_ADD_USER 0x1
807 #define LOCAL_DELETE_USER 0x2
808 #define LOCAL_DISABLE_USER 0x4
809 #define LOCAL_ENABLE_USER 0x8
810 #define LOCAL_TRUST_ACCOUNT 0x10
811 #define LOCAL_SET_NO_PASSWORD 0x20
812 #define LOCAL_SET_PASSWORD 0x40
813 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
814 #define LOCAL_INTERDOM_ACCOUNT 0x100
815 #define LOCAL_AM_ROOT 0x200 /* Act as root */
817 /* key and data in the connections database - used in smbstatus and smbd */
818 struct connections_key {
819 struct server_id pid;
824 struct connections_data {
826 struct server_id pid;
830 char servicename[FSTRING_LEN];
832 char machine[FSTRING_LEN];
836 * This field used to hold the msg_flags. For compatibility reasons,
837 * keep the data structure in the tdb file the same.
839 uint32 unused_compatitibility_field;
843 /* the following are used by loadparm for option lists */
845 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
846 P_STRING,P_USTRING,P_ENUM,P_SEP
850 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
863 bool (*special)(int snum, const char *, char **);
864 const struct enum_list *enum_list;
875 /* The following flags are used in SWAT */
876 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
877 #define FLAG_SHARE 0x0002 /* file sharing options */
878 #define FLAG_PRINT 0x0004 /* printing options */
879 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
880 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
881 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
882 #define FLAG_DEVELOPER 0x0040 /* No longer used */
883 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
884 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
885 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
886 #define FLAG_META 0x8000 /* A meta directive - not a real parameter */
887 #define FLAG_CMDLINE 0x10000 /* option has been overridden */
894 /* offsets into message for common items */
901 #define smb_pidhigh 16
902 #define smb_ss_field 18
928 /* flag defines. CIFS spec 3.1.1 */
929 #define FLAG_SUPPORT_LOCKREAD 0x01
930 #define FLAG_CLIENT_BUF_AVAIL 0x02
931 #define FLAG_RESERVED 0x04
932 #define FLAG_CASELESS_PATHNAMES 0x08
933 #define FLAG_CANONICAL_PATHNAMES 0x10
934 #define FLAG_REQUEST_OPLOCK 0x20
935 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
936 #define FLAG_REPLY 0x80
939 #define SMBmkdir 0x00 /* create directory */
940 #define SMBrmdir 0x01 /* delete directory */
941 #define SMBopen 0x02 /* open file */
942 #define SMBcreate 0x03 /* create file */
943 #define SMBclose 0x04 /* close file */
944 #define SMBflush 0x05 /* flush file */
945 #define SMBunlink 0x06 /* delete file */
946 #define SMBmv 0x07 /* rename file */
947 #define SMBgetatr 0x08 /* get file attributes */
948 #define SMBsetatr 0x09 /* set file attributes */
949 #define SMBread 0x0A /* read from file */
950 #define SMBwrite 0x0B /* write to file */
951 #define SMBlock 0x0C /* lock byte range */
952 #define SMBunlock 0x0D /* unlock byte range */
953 #define SMBctemp 0x0E /* create temporary file */
954 #define SMBmknew 0x0F /* make new file */
955 #define SMBcheckpath 0x10 /* check directory path */
956 #define SMBexit 0x11 /* process exit */
957 #define SMBlseek 0x12 /* seek */
958 #define SMBtcon 0x70 /* tree connect */
959 #define SMBtconX 0x75 /* tree connect and X*/
960 #define SMBtdis 0x71 /* tree disconnect */
961 #define SMBnegprot 0x72 /* negotiate protocol */
962 #define SMBdskattr 0x80 /* get disk attributes */
963 #define SMBsearch 0x81 /* search directory */
964 #define SMBsplopen 0xC0 /* open print spool file */
965 #define SMBsplwr 0xC1 /* write to print spool file */
966 #define SMBsplclose 0xC2 /* close print spool file */
967 #define SMBsplretq 0xC3 /* return print queue */
968 #define SMBsends 0xD0 /* send single block message */
969 #define SMBsendb 0xD1 /* send broadcast message */
970 #define SMBfwdname 0xD2 /* forward user name */
971 #define SMBcancelf 0xD3 /* cancel forward */
972 #define SMBgetmac 0xD4 /* get machine name */
973 #define SMBsendstrt 0xD5 /* send start of multi-block message */
974 #define SMBsendend 0xD6 /* send end of multi-block message */
975 #define SMBsendtxt 0xD7 /* send text of multi-block message */
978 #define SMBlockread 0x13 /* Lock a range and read */
979 #define SMBwriteunlock 0x14 /* Unlock a range then write */
980 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
981 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
982 #define SMBwritec 0x20 /* secondary write request */
983 #define SMBwriteclose 0x2c /* write a file then close it */
985 /* dos extended protocol */
986 #define SMBreadBraw 0x1A /* read block raw */
987 #define SMBreadBmpx 0x1B /* read block multiplexed */
988 #define SMBreadBs 0x1C /* read block (secondary response) */
989 #define SMBwriteBraw 0x1D /* write block raw */
990 #define SMBwriteBmpx 0x1E /* write block multiplexed */
991 #define SMBwriteBs 0x1F /* write block (secondary request) */
992 #define SMBwriteC 0x20 /* write complete response */
993 #define SMBsetattrE 0x22 /* set file attributes expanded */
994 #define SMBgetattrE 0x23 /* get file attributes expanded */
995 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
996 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
997 #define SMBtranss 0x26 /* transaction (secondary request/response) */
998 #define SMBioctl 0x27 /* IOCTL */
999 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1000 #define SMBcopy 0x29 /* copy */
1001 #define SMBmove 0x2A /* move */
1002 #define SMBecho 0x2B /* echo */
1003 #define SMBopenX 0x2D /* open and X */
1004 #define SMBreadX 0x2E /* read and X */
1005 #define SMBwriteX 0x2F /* write and X */
1006 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1007 #define SMBffirst 0x82 /* find first */
1008 #define SMBfunique 0x83 /* find unique */
1009 #define SMBfclose 0x84 /* find close */
1010 #define SMBkeepalive 0x85 /* keepalive */
1011 #define SMBinvalid 0xFE /* invalid command */
1013 /* Extended 2.0 protocol */
1014 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1015 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1016 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1017 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1018 #define SMBulogoffX 0x74 /* user logoff */
1020 /* NT SMB extensions. */
1021 #define SMBnttrans 0xA0 /* NT transact */
1022 #define SMBnttranss 0xA1 /* NT transact secondary */
1023 #define SMBntcreateX 0xA2 /* NT create and X */
1024 #define SMBntcancel 0xA4 /* NT cancel */
1025 #define SMBntrename 0xA5 /* NT rename */
1027 /* These are the trans subcommands */
1028 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1029 #define TRANSACT_DCERPCCMD 0x26
1030 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1032 /* These are the TRANS2 sub commands */
1033 #define TRANSACT2_OPEN 0x00
1034 #define TRANSACT2_FINDFIRST 0x01
1035 #define TRANSACT2_FINDNEXT 0x02
1036 #define TRANSACT2_QFSINFO 0x03
1037 #define TRANSACT2_SETFSINFO 0x04
1038 #define TRANSACT2_QPATHINFO 0x05
1039 #define TRANSACT2_SETPATHINFO 0x06
1040 #define TRANSACT2_QFILEINFO 0x07
1041 #define TRANSACT2_SETFILEINFO 0x08
1042 #define TRANSACT2_FSCTL 0x09
1043 #define TRANSACT2_IOCTL 0x0A
1044 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1045 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1046 #define TRANSACT2_MKDIR 0x0D
1047 #define TRANSACT2_SESSION_SETUP 0x0E
1048 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1049 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1051 /* These are the NT transact sub commands. */
1052 #define NT_TRANSACT_CREATE 1
1053 #define NT_TRANSACT_IOCTL 2
1054 #define NT_TRANSACT_SET_SECURITY_DESC 3
1055 #define NT_TRANSACT_NOTIFY_CHANGE 4
1056 #define NT_TRANSACT_RENAME 5
1057 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1058 #define NT_TRANSACT_GET_USER_QUOTA 7
1059 #define NT_TRANSACT_SET_USER_QUOTA 8
1061 /* These are the NT transact_get_user_quota sub commands */
1062 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1063 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1064 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1066 /* Relevant IOCTL codes */
1067 #define IOCTL_QUERY_JOB_INFO 0x530060
1069 /* these are the trans2 sub fields for primary requests */
1070 #define smb_tpscnt smb_vwv0
1071 #define smb_tdscnt smb_vwv1
1072 #define smb_mprcnt smb_vwv2
1073 #define smb_mdrcnt smb_vwv3
1074 #define smb_msrcnt smb_vwv4
1075 #define smb_flags smb_vwv5
1076 #define smb_timeout smb_vwv6
1077 #define smb_pscnt smb_vwv9
1078 #define smb_psoff smb_vwv10
1079 #define smb_dscnt smb_vwv11
1080 #define smb_dsoff smb_vwv12
1081 #define smb_suwcnt smb_vwv13
1082 #define smb_setup smb_vwv14
1083 #define smb_setup0 smb_setup
1084 #define smb_setup1 (smb_setup+2)
1085 #define smb_setup2 (smb_setup+4)
1087 /* these are for the secondary requests */
1088 #define smb_spscnt smb_vwv2
1089 #define smb_spsoff smb_vwv3
1090 #define smb_spsdisp smb_vwv4
1091 #define smb_sdscnt smb_vwv5
1092 #define smb_sdsoff smb_vwv6
1093 #define smb_sdsdisp smb_vwv7
1094 #define smb_sfid smb_vwv8
1096 /* and these for responses */
1097 #define smb_tprcnt smb_vwv0
1098 #define smb_tdrcnt smb_vwv1
1099 #define smb_prcnt smb_vwv3
1100 #define smb_proff smb_vwv4
1101 #define smb_prdisp smb_vwv5
1102 #define smb_drcnt smb_vwv6
1103 #define smb_droff smb_vwv7
1104 #define smb_drdisp smb_vwv8
1106 /* these are for the NT trans primary request. */
1107 #define smb_nt_MaxSetupCount smb_vwv0
1108 #define smb_nt_Flags (smb_vwv0 + 1)
1109 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1110 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1111 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1112 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1113 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1114 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1115 #define smb_nt_DataCount (smb_vwv0 + 27)
1116 #define smb_nt_DataOffset (smb_vwv0 + 31)
1117 #define smb_nt_SetupCount (smb_vwv0 + 35)
1118 #define smb_nt_Function (smb_vwv0 + 36)
1119 #define smb_nt_SetupStart (smb_vwv0 + 38)
1121 /* these are for the NT trans secondary request. */
1122 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1123 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1124 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1125 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1126 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1127 #define smb_nts_DataCount (smb_vwv0 + 23)
1128 #define smb_nts_DataOffset (smb_vwv0 + 27)
1129 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1131 /* these are for the NT trans reply. */
1132 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1133 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1134 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1135 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1136 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1137 #define smb_ntr_DataCount (smb_vwv0 + 23)
1138 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1139 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1141 /* these are for the NT create_and_X */
1142 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1143 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1144 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1145 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1146 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1147 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1148 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1149 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1150 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1151 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1152 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1154 /* this is used on a TConX. I'm not sure the name is very helpful though */
1155 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1156 #define SMB_SHARE_IN_DFS 0x0002
1158 /* Named pipe write mode flags. Used in writeX calls. */
1159 #define PIPE_RAW_MODE 0x4
1160 #define PIPE_START_MESSAGE 0x8
1162 /* the desired access to use when opening a pipe */
1163 #define DESIRED_ACCESS_PIPE 0x2019f
1165 /* Mapping of access rights to UNIX perms. */
1166 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1167 #define UNIX_ACCESS_R FILE_GENERIC_READ
1168 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1169 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1171 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1172 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1173 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1174 #define UNIX_DIRECTORY_ACCESS_W (FILE_GENERIC_WRITE|FILE_DELETE_CHILD)
1175 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1179 * This is the old mapping we used to use. To get W2KSP2 profiles
1180 * working we need to map to the canonical file perms.
1182 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1183 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1184 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1185 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1186 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1187 FILE_APPEND_DATA|FILE_WRITE_DATA)
1188 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1189 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1192 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1195 #define REQUEST_OPLOCK 2
1196 #define REQUEST_BATCH_OPLOCK 4
1197 #define OPEN_DIRECTORY 8
1198 #define EXTENDED_RESPONSE_REQUIRED 0x10
1200 /* ShareAccess field. */
1201 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1202 #define FILE_SHARE_READ 1
1203 #define FILE_SHARE_WRITE 2
1204 #define FILE_SHARE_DELETE 4
1206 /* FileAttributesField */
1207 #define FILE_ATTRIBUTE_READONLY 0x001L
1208 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1209 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1210 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1211 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1212 #define FILE_ATTRIBUTE_NORMAL 0x080L
1213 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1214 #define FILE_ATTRIBUTE_SPARSE 0x200L
1215 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1216 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1217 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1218 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1219 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1220 #define SAMBA_ATTRIBUTES_MASK (FILE_ATTRIBUTE_READONLY|\
1221 FILE_ATTRIBUTE_HIDDEN|\
1222 FILE_ATTRIBUTE_SYSTEM|\
1223 FILE_ATTRIBUTE_DIRECTORY|\
1224 FILE_ATTRIBUTE_ARCHIVE)
1226 /* Flags - combined with attributes. */
1227 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1228 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1229 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1230 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1231 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1232 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1233 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1235 /* CreateDisposition field. */
1236 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1237 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1238 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1239 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1240 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1241 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1243 /* CreateOptions field. */
1244 #define FILE_DIRECTORY_FILE 0x0001
1245 #define FILE_WRITE_THROUGH 0x0002
1246 #define FILE_SEQUENTIAL_ONLY 0x0004
1247 #define FILE_NO_INTERMEDIATE_BUFFERING 0x0008
1248 #define FILE_SYNCHRONOUS_IO_ALERT 0x0010 /* may be ignored */
1249 #define FILE_SYNCHRONOUS_IO_NONALERT 0x0020 /* may be ignored */
1250 #define FILE_NON_DIRECTORY_FILE 0x0040
1251 #define FILE_CREATE_TREE_CONNECTION 0x0080 /* ignore, should be zero */
1252 #define FILE_COMPLETE_IF_OPLOCKED 0x0100 /* ignore, should be zero */
1253 #define FILE_NO_EA_KNOWLEDGE 0x0200
1254 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400 /* aka OPEN_FOR_RECOVERY: ignore, should be zero */
1255 #define FILE_RANDOM_ACCESS 0x0800
1256 #define FILE_DELETE_ON_CLOSE 0x1000
1257 #define FILE_OPEN_BY_FILE_ID 0x2000
1258 #define FILE_OPEN_FOR_BACKUP_INTENT 0x4000
1259 #define FILE_NO_COMPRESSION 0x8000
1260 #define FILE_RESERVER_OPFILTER 0x00100000 /* ignore, should be zero */
1261 #define FILE_OPEN_REPARSE_POINT 0x00200000
1262 #define FILE_OPEN_NO_RECALL 0x00400000
1263 #define FILE_OPEN_FOR_FREE_SPACE_QUERY 0x00800000 /* ignore should be zero */
1265 #define NTCREATEX_OPTIONS_MUST_IGNORE_MASK (0x008F0480)
1267 #define NTCREATEX_OPTIONS_INVALID_PARAM_MASK (0xFF100030)
1270 * Private create options used by the ntcreatex processing code. From Samba4.
1271 * We reuse some ignored flags for private use. Passed in the private_flags
1274 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x0001
1275 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x0002
1277 /* Private options for streams support */
1278 #define NTCREATEX_OPTIONS_PRIVATE_STREAM_DELETE 0x0004
1280 /* Private options for printer support */
1281 #define NTCREATEX_OPTIONS_PRIVATE_DELETE_ON_CLOSE 0x0008
1283 /* Responses when opening a file. */
1284 #define FILE_WAS_SUPERSEDED 0
1285 #define FILE_WAS_OPENED 1
1286 #define FILE_WAS_CREATED 2
1287 #define FILE_WAS_OVERWRITTEN 3
1289 /* File type flags */
1290 #define FILE_TYPE_DISK 0
1291 #define FILE_TYPE_BYTE_MODE_PIPE 1
1292 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1293 #define FILE_TYPE_PRINTER 3
1294 #define FILE_TYPE_COMM_DEVICE 4
1295 #define FILE_TYPE_UNKNOWN 0xFFFF
1297 /* Flag for NT transact rename call. */
1298 #define RENAME_REPLACE_IF_EXISTS 1
1300 /* flags for SMBntrename call (from Samba4) */
1301 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1302 #define RENAME_FLAG_HARD_LINK 0x103
1303 #define RENAME_FLAG_RENAME 0x104
1304 #define RENAME_FLAG_COPY 0x105
1306 /* Filesystem Attributes. */
1307 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1308 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1309 #define FILE_UNICODE_ON_DISK 0x00000004
1310 /* According to cifs9f, this is 4, not 8 */
1311 /* Acconding to testing, this actually sets the security attribute! */
1312 #define FILE_PERSISTENT_ACLS 0x00000008
1313 #define FILE_FILE_COMPRESSION 0x00000010
1314 #define FILE_VOLUME_QUOTAS 0x00000020
1315 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1316 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1317 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1318 #define FS_LFN_APIS 0x00004000
1319 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1320 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1321 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1322 #define FILE_NAMED_STREAMS 0x00040000
1323 #define FILE_READ_ONLY_VOLUME 0x00080000
1325 /* ChangeNotify flags. */
1326 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1327 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1328 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1329 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1330 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1331 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1332 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1333 #define FILE_NOTIFY_CHANGE_EA 0x080
1334 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1335 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1336 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1337 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1339 #define FILE_NOTIFY_CHANGE_NAME \
1340 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1342 /* change notify action results */
1343 #define NOTIFY_ACTION_ADDED 1
1344 #define NOTIFY_ACTION_REMOVED 2
1345 #define NOTIFY_ACTION_MODIFIED 3
1346 #define NOTIFY_ACTION_OLD_NAME 4
1347 #define NOTIFY_ACTION_NEW_NAME 5
1348 #define NOTIFY_ACTION_ADDED_STREAM 6
1349 #define NOTIFY_ACTION_REMOVED_STREAM 7
1350 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1353 /* where to find the base of the SMB packet proper */
1354 #define smb_base(buf) (((char *)(buf))+4)
1356 /* we don't allow server strings to be longer than 48 characters as
1357 otherwise NT will not honour the announce packets */
1358 #define MAX_SERVER_STRING_LENGTH 48
1361 #define SMB_SUCCESS 0 /* The request was successful. */
1364 void dfs_unlogin(void);
1365 extern int dcelogin_atmost_once;
1369 char *strdup(char *s);
1376 /* This was set by JHT in liaison with Jeremy Allison early 1997
1378 * Version 4.0 - never made public
1379 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1380 * - Reappeared in 1.9.16p11 with fixed smbd services
1381 * Version 4.20 - To indicate that nmbd and browsing now works better
1382 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1384 * Note: In the presence of NT4.X do not set above 4.9
1385 * Setting this above 4.9 can have undesired side-effects.
1386 * This may change again in Samba-3.0 after further testing. JHT
1389 #define DEFAULT_MAJOR_VERSION 0x04
1390 #define DEFAULT_MINOR_VERSION 0x09
1392 /* Browser Election Values */
1393 #define BROWSER_ELECTION_VERSION 0x010f
1394 #define BROWSER_CONSTANT 0xaa55
1396 /* Sercurity mode bits. */
1397 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1398 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1399 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1400 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1402 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1404 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1405 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1406 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1407 #define FLAGS2_UNKNOWN_BIT4 0x0010
1408 #define FLAGS2_IS_LONG_NAME 0x0040
1409 #define FLAGS2_EXTENDED_SECURITY 0x0800
1410 #define FLAGS2_DFS_PATHNAMES 0x1000
1411 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1412 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1413 #define FLAGS2_UNICODE_STRINGS 0x8000
1415 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1417 /* TCONX Flag (smb_vwv2). */
1418 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1420 /* File Status Flags. See:
1422 http://msdn.microsoft.com/en-us/library/cc246334(PROT.13).aspx
1426 #define NO_SUBSTREAMS 0x2
1427 #define NO_REPARSETAG 0x4
1429 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1431 #define CAP_RAW_MODE 0x0001
1432 #define CAP_MPX_MODE 0x0002
1433 #define CAP_UNICODE 0x0004
1434 #define CAP_LARGE_FILES 0x0008
1435 #define CAP_NT_SMBS 0x0010
1436 #define CAP_RPC_REMOTE_APIS 0x0020
1437 #define CAP_STATUS32 0x0040
1438 #define CAP_LEVEL_II_OPLOCKS 0x0080
1439 #define CAP_LOCK_AND_READ 0x0100
1440 #define CAP_NT_FIND 0x0200
1441 #define CAP_DFS 0x1000
1442 #define CAP_W2K_SMBS 0x2000
1443 #define CAP_LARGE_READX 0x4000
1444 #define CAP_LARGE_WRITEX 0x8000
1445 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1446 #define CAP_EXTENDED_SECURITY 0x80000000
1448 /* protocol types. It assumes that higher protocols include lower protocols
1450 enum protocol_types {
1460 /* security levels */
1461 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1471 /* printing types */
1472 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1473 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1474 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1475 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1476 ,PRINT_TEST,PRINT_VLP
1477 #endif /* DEVELOPER */
1480 /* LDAP schema types */
1481 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1483 /* LDAP SSL options */
1484 enum ldap_ssl_types {LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1486 /* LDAP PASSWD SYNC methods */
1487 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1490 * This should be under the HAVE_KRB5 flag but since they're used
1491 * in lp_kerberos_method(), they ned to be always available
1492 * If you add any entries to KERBEROS_VERIFY defines, please modify USE.*KEYTAB macros
1493 * so they remain accurate.
1496 #define KERBEROS_VERIFY_SECRETS 0
1497 #define KERBEROS_VERIFY_SYSTEM_KEYTAB 1
1498 #define KERBEROS_VERIFY_DEDICATED_KEYTAB 2
1499 #define KERBEROS_VERIFY_SECRETS_AND_KEYTAB 3
1501 /* Remote architectures we know about. */
1502 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1503 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_VISTA,
1504 RA_SAMBA, RA_CIFSFS, RA_WINXP64};
1507 enum case_handling {CASE_LOWER,CASE_UPPER};
1509 /* ACL compatibility */
1510 enum acl_compatibility {ACL_COMPAT_AUTO, ACL_COMPAT_WINNT, ACL_COMPAT_WIN2K};
1512 * Global value meaing that the smb_uid field should be
1513 * ingored (in share level security and protocol level == CORE)
1516 #define UID_FIELD_INVALID 0
1517 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1520 * Size of buffer to use when moving files across filesystems.
1522 #define COPYBUF_SIZE (8*1024)
1525 * Map the Core and Extended Oplock requesst bits down
1526 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1532 #define CORE_OPLOCK_REQUEST(inbuf) \
1533 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1536 * Extended protocol.
1538 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1541 #define LOCKING_ANDX_SHARED_LOCK 0x1
1542 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1543 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1544 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1545 #define LOCKING_ANDX_LARGE_FILES 0x10
1548 * Bits we test with.
1549 * Note these must fit into 16-bits.
1552 #define NO_OPLOCK 0x0
1553 #define EXCLUSIVE_OPLOCK 0x1
1554 #define BATCH_OPLOCK 0x2
1555 #define LEVEL_II_OPLOCK 0x4
1557 /* The following are Samba-private. */
1558 #define INTERNAL_OPEN_ONLY 0x8
1559 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1560 * inform potential level2 holders on
1562 #define DEFERRED_OPEN_ENTRY 0x20
1563 #define UNUSED_SHARE_MODE_ENTRY 0x40
1564 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1566 /* None of the following should ever appear in fsp->oplock_request. */
1567 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1569 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1570 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1571 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1573 /* kernel_oplock_message definition.
1575 struct kernel_oplock_message {
1579 unsigned long file_id;
1583 0 uint64_t dev 8 bytes
1584 8 uint64_t inode 8 bytes
1585 16 uint64_t extid 8 bytes
1586 24 unsigned long file_id 4 bytes
1590 #define MSG_SMB_KERNEL_BREAK_SIZE 28
1592 /* file_renamed_message definition.
1594 struct file_renamed_message {
1597 char names[1]; A variable area containing sharepath and filename.
1601 0 uint64_t dev 8 bytes
1602 8 uint64_t inode 8 bytes
1603 16 unit64_t extid 8 bytes
1604 24 char [] name zero terminated namelen bytes
1605 minimum length == 24.
1609 #define MSG_FILE_RENAMED_MIN_SIZE 24
1612 * On the wire return values for oplock types.
1615 #define CORE_OPLOCK_GRANTED (1<<5)
1616 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1618 #define NO_OPLOCK_RETURN 0
1619 #define EXCLUSIVE_OPLOCK_RETURN 1
1620 #define BATCH_OPLOCK_RETURN 2
1621 #define LEVEL_II_OPLOCK_RETURN 3
1624 #define OPLOCKLEVEL_NONE 0
1625 #define OPLOCKLEVEL_II 1
1628 * Capabilities abstracted for different systems.
1631 enum smbd_capability {
1632 KERNEL_OPLOCK_CAPABILITY,
1633 DMAPI_ACCESS_CAPABILITY,
1638 * Kernel oplocks capability flags.
1641 /* Level 2 oplocks are supported natively by kernel oplocks. */
1642 #define KOPLOCKS_LEVEL2_SUPPORTED 0x1
1644 /* The kernel notifies deferred openers when they can retry the open. */
1645 #define KOPLOCKS_DEFERRED_OPEN_NOTIFICATION 0x2
1647 /* The kernel notifies smbds when an oplock break times out. */
1648 #define KOPLOCKS_TIMEOUT_NOTIFICATION 0x4
1650 /* The kernel notifies smbds when an oplock is broken. */
1651 #define KOPLOCKS_OPLOCK_BROKEN_NOTIFICATION 0x8
1653 struct kernel_oplocks_ops;
1654 struct kernel_oplocks {
1655 const struct kernel_oplocks_ops *ops;
1660 enum level2_contention_type {
1661 LEVEL2_CONTEND_ALLOC_SHRINK,
1662 LEVEL2_CONTEND_ALLOC_GROW,
1663 LEVEL2_CONTEND_SET_FILE_LEN,
1664 LEVEL2_CONTEND_FILL_SPARSE,
1665 LEVEL2_CONTEND_WRITE,
1666 LEVEL2_CONTEND_WINDOWS_BRL,
1667 LEVEL2_CONTEND_POSIX_BRL
1670 /* if a kernel does support oplocks then a structure of the following
1671 typee is used to describe how to interact with the kernel */
1672 struct kernel_oplocks_ops {
1673 bool (*set_oplock)(struct kernel_oplocks *ctx,
1674 files_struct *fsp, int oplock_type);
1675 void (*release_oplock)(struct kernel_oplocks *ctx,
1676 files_struct *fsp, int oplock_type);
1677 void (*contend_level2_oplocks_begin)(files_struct *fsp,
1678 enum level2_contention_type type);
1679 void (*contend_level2_oplocks_end)(files_struct *fsp,
1680 enum level2_contention_type type);
1683 #include "smb_macros.h"
1685 #define MAX_NETBIOSNAME_LEN 16
1686 /* DOS character, NetBIOS namestring. Type used on the wire. */
1687 typedef char nstring[MAX_NETBIOSNAME_LEN];
1688 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1689 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1691 /* A netbios name structure. */
1695 unsigned int name_type;
1698 /* A netbios node status array element. */
1699 struct node_status {
1702 unsigned char flags;
1705 /* The extra info from a NetBIOS node status query */
1706 struct node_status_extra {
1707 unsigned char mac_addr[6];
1708 /* There really is more here ... */
1711 typedef struct user_struct {
1712 struct user_struct *next, *prev;
1713 uint16 vuid; /* Tag for this entry. */
1715 char *session_keystr; /* used by utmp and pam session code.
1719 struct auth_serversupplied_info *server_info;
1721 struct auth_ntlmssp_state *auth_ntlmssp_state;
1724 struct unix_error_map {
1732 * Size of new password account encoding string. This is enough space to
1733 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1734 * Do not change unless you are adding new ACB bits!
1737 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1740 Do you want session setups at user level security with a invalid
1741 password to be rejected or allowed in as guest? WinNT rejects them
1742 but it can be a pain as it means "net view" needs to use a password
1744 You have 3 choices in the setting of map_to_guest:
1746 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1747 are rejected. This is the default.
1749 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1750 are rejected, unless the username does not exist, in which case it
1751 is treated as a guest login
1753 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1754 are treated as a guest login
1756 Note that map_to_guest only has an effect in user or server
1760 #define NEVER_MAP_TO_GUEST 0
1761 #define MAP_TO_GUEST_ON_BAD_USER 1
1762 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1763 #define MAP_TO_GUEST_ON_BAD_UID 3
1765 #define SAFE_NETBIOS_CHARS ". -_"
1767 /* The maximum length of a trust account password.
1768 Used when we randomly create it, 15 char passwords
1769 exceed NT4's max password length */
1771 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1775 #define LDAP_PORT 389
1777 #define LDAP_GC_PORT 3268
1779 /* used by the IP comparison function */
1781 struct sockaddr_storage ss;
1792 struct ea_list *next, *prev;
1793 struct ea_struct ea;
1796 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1797 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1798 /* EA to use for DOS attributes */
1799 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1800 /* Prefix for DosStreams in the vfs_streams_xattr module */
1801 #define SAMBA_XATTR_DOSSTREAM_PREFIX "user.DosStream."
1802 /* Prefix for xattrs storing streams. */
1803 #define SAMBA_XATTR_MARKER "user.SAMBA_STREAMS"
1805 /* map readonly options */
1806 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};
1808 /* usershare error codes. */
1809 enum usershare_err {
1811 USERSHARE_MALFORMED_FILE,
1812 USERSHARE_BAD_VERSION,
1813 USERSHARE_MALFORMED_PATH,
1814 USERSHARE_MALFORMED_COMMENT_DEF,
1815 USERSHARE_MALFORMED_ACL_DEF,
1817 USERSHARE_PATH_NOT_ABSOLUTE,
1818 USERSHARE_PATH_IS_DENIED,
1819 USERSHARE_PATH_NOT_ALLOWED,
1820 USERSHARE_PATH_NOT_DIRECTORY,
1821 USERSHARE_POSIX_ERR,
1822 USERSHARE_MALFORMED_SHARENAME_DEF,
1823 USERSHARE_BAD_SHARENAME
1826 /* Different reasons for closing a file. */
1827 enum file_close_type {NORMAL_CLOSE=0,SHUTDOWN_CLOSE,ERROR_CLOSE};
1829 /* Used in SMB_FS_OBJECTID_INFORMATION requests. Must be exactly 48 bytes. */
1830 #define SAMBA_EXTENDED_INFO_MAGIC 0x536d4261 /* "SmBa" */
1831 #define SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH 28
1832 struct smb_extended_info {
1833 uint32 samba_magic; /* Always SAMBA_EXTRA_INFO_MAGIC */
1834 uint32 samba_version; /* Major/Minor/Release/Revision */
1835 uint32 samba_subversion; /* Prerelease/RC/Vendor patch */
1836 NTTIME samba_gitcommitdate;
1837 char samba_version_string[SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH];
1841 struct smb_file_time {
1842 struct timespec mtime;
1843 struct timespec atime;
1844 struct timespec ctime;
1845 struct timespec create_time;
1849 * unix_convert_flags
1851 #define UCF_SAVE_LCOMP 0x00000001
1852 #define UCF_ALWAYS_ALLOW_WCARD_LCOMP 0x00000002
1853 #define UCF_COND_ALLOW_WCARD_LCOMP 0x00000004
1854 #define UCF_POSIX_PATHNAMES 0x00000008
1859 struct smb_filename {
1862 char *original_lcomp;
1866 /* struct for maintaining the child processes that get spawned from smbd */
1868 struct child_pid *prev, *next;
1872 /* Used to keep track of deferred opens. */
1873 struct deferred_open_record;
1875 /* Client-side offline caching policy types */
1876 #define CSC_POLICY_MANUAL 0
1877 #define CSC_POLICY_DOCUMENTS 1
1878 #define CSC_POLICY_PROGRAMS 2
1879 #define CSC_POLICY_DISABLE 3
1881 /* Used inside aio code. */