2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2000
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 #if defined(LARGE_SMB_OFF_T)
31 #define BUFFER_SIZE (128*1024)
32 #else /* no large readwrite possible */
33 #define BUFFER_SIZE (0xFFFF)
36 #define SAFETY_MARGIN 1024
37 #define LARGE_WRITEX_HDR_SIZE 65
40 #define DGRAM_PORT 138
49 #define _BOOL /* So we don't typedef BOOL again in vfs.h */
52 /* limiting size of ipc replies */
53 #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024))
57 #ifndef DEF_CREATE_MASK
58 #define DEF_CREATE_MASK (0755)
61 /* string manipulation flags - see clistr.c and srvstr.c */
62 #define STR_TERMINATE 1
66 #define STR_NOALIGN 16
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 #define READ_TIMEOUT 1
79 #define DIR_STRUCT_SIZE 43
81 /* these define the attribute byte as seen by DOS */
82 #define aRONLY (1L<<0) /* 0x01 */
83 #define aHIDDEN (1L<<1) /* 0x02 */
84 #define aSYSTEM (1L<<2) /* 0x04 */
85 #define aVOLID (1L<<3) /* 0x08 */
86 #define aDIR (1L<<4) /* 0x10 */
87 #define aARCH (1L<<5) /* 0x20 */
98 #define DOS_OPEN_RDONLY 0
99 #define DOS_OPEN_WRONLY 1
100 #define DOS_OPEN_RDWR 2
101 #define DOS_OPEN_FCB 0xF
103 /* define shifts and masks for share and open modes. */
104 #define OPEN_MODE_MASK 0xF
105 #define SHARE_MODE_SHIFT 4
106 #define SHARE_MODE_MASK 0x7
107 #define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
108 #define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
109 #define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK)
110 #define SET_DENY_MODE(x) (((x) & SHARE_MODE_MASK) <<SHARE_MODE_SHIFT)
112 /* Sync on open file (not sure if used anymore... ?) */
113 #define FILE_SYNC_OPENMODE (1<<14)
114 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
116 /* allow delete on open file mode (used by NT SMB's). */
117 #define ALLOW_SHARE_DELETE (1<<15)
118 #define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False)
119 #define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0)
121 /* delete on close flag (used by NT SMB's). */
122 #define DELETE_ON_CLOSE_FLAG (1<<16)
123 #define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False)
124 #define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0)
126 /* open disposition values */
127 #define FILE_EXISTS_FAIL 0
128 #define FILE_EXISTS_OPEN 1
129 #define FILE_EXISTS_TRUNCATE 2
131 /* mask for open disposition. */
132 #define FILE_OPEN_MASK 0x3
134 #define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
135 #define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
137 /* The above can be OR'ed with... */
138 #define FILE_CREATE_IF_NOT_EXIST 0x10
139 #define FILE_FAIL_IF_NOT_EXIST 0
141 #define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST))
144 #define STYPE_DISKTREE 0 /* Disk drive */
145 #define STYPE_PRINTQ 1 /* Spooler queue */
146 #define STYPE_DEVICE 2 /* Serial device */
147 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
148 #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */
153 * SMB UCS2 (16-bit unicode) internal type.
156 typedef uint16 smb_ucs2_t;
158 /* ucs2 string types. */
159 typedef smb_ucs2_t wpstring[PSTRING_LEN];
160 typedef smb_ucs2_t wfstring[FSTRING_LEN];
163 #ifdef WORDS_BIGENDIAN
169 /* turn a 7 bit character into a ucs2 character */
170 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
172 /* pipe string names */
173 #define PIPE_LANMAN "\\PIPE\\LANMAN"
174 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
175 #define PIPE_SAMR "\\PIPE\\samr"
176 #define PIPE_WINREG "\\PIPE\\winreg"
177 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
178 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
179 #define PIPE_NTLSA "\\PIPE\\ntlsa"
180 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
181 #define PIPE_LSASS "\\PIPE\\lsass"
182 #define PIPE_LSARPC "\\PIPE\\lsarpc"
183 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
184 #define PIPE_NETDFS "\\PIPE\\netdfs"
186 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
187 typedef struct nttime_info
194 /* The Splint code analysis tool doesn't like immediate structures. */
196 #ifdef _SPLINT_ /* http://www.splint.org */
197 #undef HAVE_IMMEDIATE_STRUCTURES
200 /* the following rather strange looking definitions of NTSTATUS and WERROR
201 and there in order to catch common coding errors where different error types
202 are mixed up. This is especially important as we slowly convert Samba
203 from using BOOL for internal functions
206 #if defined(HAVE_IMMEDIATE_STRUCTURES)
207 typedef struct {uint32 v;} NTSTATUS;
208 #define NT_STATUS(x) ((NTSTATUS) { x })
209 #define NT_STATUS_V(x) ((x).v)
211 typedef uint32 NTSTATUS;
212 #define NT_STATUS(x) (x)
213 #define NT_STATUS_V(x) (x)
216 #if defined(HAVE_IMMEDIATE_STRUCTURES)
217 typedef struct {uint32 v;} WERROR;
218 #define W_ERROR(x) ((WERROR) { x })
219 #define W_ERROR_V(x) ((x).v)
221 typedef uint32 WERROR;
222 #define W_ERROR(x) (x)
223 #define W_ERROR_V(x) (x)
226 #define NT_STATUS_IS_OK(x) (NT_STATUS_V(x) == 0)
227 #define NT_STATUS_IS_ERR(x) ((NT_STATUS_V(x) & 0xc0000000) == 0xc0000000)
228 #define NT_STATUS_EQUAL(x,y) (NT_STATUS_V(x) == NT_STATUS_V(y))
229 #define W_ERROR_IS_OK(x) (W_ERROR_V(x) == 0)
232 /* Allowable account control bits */
233 #define ACB_DISABLED 0x0001 /* 1 = User account disabled */
234 #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */
235 #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */
236 #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */
237 #define ACB_NORMAL 0x0010 /* 1 = Normal user account */
238 #define ACB_MNS 0x0020 /* 1 = MNS logon user account */
239 #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */
240 #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */
241 #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */
242 #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */
243 #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */
245 #define MAX_HOURS_LEN 32
248 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
252 * @brief Security Identifier
254 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
256 typedef struct sid_info
258 uint8 sid_rev_num; /**< SID revision number */
259 uint8 num_auths; /**< Number of sub-authorities */
260 uint8 id_auth[6]; /**< Identifier Authority */
262 * Pointer to sub-authorities.
264 * @note The values in these uint32's are in *native* byteorder, not
265 * neccessarily little-endian...... JRA.
267 uint32 sub_auths[MAXSUBAUTHS];
272 * The complete list of SIDS belonging to this user.
273 * Created when a vuid is registered.
274 * The definition of the user_sids array is as follows :
276 * token->user_sids[0] = primary user SID.
277 * token->user_sids[1] = primary group SID.
278 * token->user_sids[2..num_sids] = supplementary group SIDS.
281 #define PRIMARY_USER_SID_INDEX 0
282 #define PRIMARY_GROUP_SID_INDEX 1
284 typedef struct _nt_user_token {
289 /*** query a local group, get a list of these: shows who is in that group ***/
291 /* local group member info */
292 typedef struct local_grp_member_info
294 DOM_SID sid ; /* matches with name */
295 uint8 sid_use; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */
296 fstring name ; /* matches with sid: must be of the form "DOMAIN\account" */
300 /* enumerate these to get list of local groups */
302 /* local group info */
303 typedef struct local_grp_info
310 /*** enumerate these to get list of domain groups ***/
312 /* domain group member info */
313 typedef struct domain_grp_info
317 uint32 rid; /* group rid */
318 uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
322 /*** query a domain group, get a list of these: shows who is in that group ***/
324 /* domain group info */
325 typedef struct domain_grp_member_info
328 uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
332 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
333 typedef struct time_info
338 /* Structure used when SMBwritebmpx is active */
341 size_t wr_total_written; /* So we know when to discard this */
344 int32 wr_error; /* Cached errors */
345 BOOL wr_mode; /* write through mode) */
346 BOOL wr_discard; /* discard all further data */
349 typedef struct write_cache
360 smb_ucs2_t *origname;
361 smb_ucs2_t *filename;
362 SMB_STRUCT_STAT *statinfo;
366 typedef struct files_struct
368 struct files_struct *next, *prev;
370 struct connection_struct *conn;
375 BOOL delete_on_close;
380 write_bmpx_struct *wbmpx_ptr;
382 struct timeval open_time;
384 uint32 desired_access;
385 time_t pending_modtime;
387 int sent_oplock_break;
388 unsigned long file_id;
395 BOOL directory_delete_on_close;
399 /* used to hold an arbitrary blob of data */
400 typedef struct data_blob {
403 void (*free)(struct data_blob *data_blob);
407 * Structure used to keep directory state information around.
408 * Used in NT change-notify code.
419 uid_t list[UID_CACHE_SIZE];
426 } name_compare_entry;
428 /* Include VFS stuff */
430 #include "smb_acls.h"
433 typedef struct connection_struct
435 struct connection_struct *next, *prev;
436 unsigned cnum; /* an index passed over the wire */
439 struct uid_cache uid_cache;
449 struct vfs_ops vfs_ops; /* Filesystem operations */
450 /* Handle on dlopen() call */
454 char *user; /* name of user who *opened* this connection */
455 uid_t uid; /* uid of user who *opened* this connection */
456 gid_t gid; /* gid of user who *opened* this connection */
457 char client_address[18]; /* String version of client IP address. */
459 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
461 /* following groups stuff added by ih */
463 /* This groups info is valid for the user that *opened* the connection */
466 NT_USER_TOKEN *nt_user_token;
471 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
472 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
473 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
479 connection_struct *conn;
485 NT_USER_TOKEN *nt_user_token;
488 /* Defines for the sent_oplock_break field above. */
489 #define NO_BREAK_SENT 0
490 #define EXCLUSIVE_BREAK_SENT 1
491 #define LEVEL_II_BREAK_SENT 2
494 fstring smb_name; /* user name from the client */
495 fstring unix_name; /* unix user name of a validated user */
496 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
497 fstring domain; /* domain that the client specified */
500 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
502 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
503 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
505 typedef struct _print_queue_struct
515 } print_queue_struct;
517 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
524 } print_status_struct;
526 /* used for server information: client, nameserv and ipc */
527 struct server_info_struct
532 fstring domain; /* used ONLY in ipc.c NOT namework.c */
533 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
537 /* used for network interfaces */
540 struct interface *next, *prev;
542 struct in_addr bcast;
543 struct in_addr nmask;
546 /* struct returned by get_share_modes */
552 uint32 desired_access;
556 unsigned long share_file_id;
560 #define SHAREMODE_FN_CAST() \
561 void (*)(share_mode_entry *, char*)
563 #define SHAREMODE_FN(fn) \
564 void (*fn)(share_mode_entry *, char*)
566 #define NT_HASH_LEN 16
567 #define LM_HASH_LEN 16
570 * bit flags representing initialized fields in SAM_ACCOUNT
572 #define FLAG_SAM_UNINIT 0x00000000
573 #define FLAG_SAM_UID 0x00000001
574 #define FLAG_SAM_GID 0x00000002
575 #define FLAG_SAM_SMBHOME 0x00000004
576 #define FLAG_SAM_PROFILE 0x00000008
577 #define FLAG_SAM_DRIVE 0x00000010
578 #define FLAG_SAM_LOGONSCRIPT 0x00000020
579 #define FLAG_SAM_LOGONTIME 0x00000040
580 #define FLAG_SAM_LOGOFFTIME 0x00000080
581 #define FLAG_SAM_KICKOFFTIME 0x00000100
582 #define FLAG_SAM_CANCHANGETIME 0x00000200
583 #define FLAG_SAM_MUSTCHANGETIME 0x00000400
584 #define FLAG_SAM_PLAINTEXT_PW 0x00000800
586 #define IS_SAM_UNIX_USER(x) \
587 ((pdb_get_init_flag(x) & FLAG_SAM_UID) \
588 && (pdb_get_init_flag(x) & FLAG_SAM_GID))
590 #define IS_SAM_SET(x, flag) ((x)->private.init_flag & (flag))
592 typedef struct sam_passwd
596 void (*free_fn)(struct sam_passwd **);
598 struct pdb_methods *methods;
601 /* initiailization flags */
604 time_t logon_time; /* logon time */
605 time_t logoff_time; /* logoff time */
606 time_t kickoff_time; /* kickoff time */
607 time_t pass_last_set_time; /* password last set time */
608 time_t pass_can_change_time; /* password can change time */
609 time_t pass_must_change_time; /* password must change time */
611 char * username; /* UNIX username string */
612 char * domain; /* Windows Domain name */
613 char * nt_username; /* Windows username string */
614 char * full_name; /* user's full name string */
615 char * unix_home_dir; /* UNIX home directory string */
616 char * home_dir; /* home directory string */
617 char * dir_drive; /* home directory drive string */
618 char * logon_script; /* logon script string */
619 char * profile_path; /* profile path string */
620 char * acct_desc ; /* user description string */
621 char * workstations; /* login from workstations string */
622 char * unknown_str ; /* don't know what this is, yet. */
623 char * munged_dial ; /* munged path name and dial-back tel number */
625 uid_t uid; /* this is a unix uid_t */
626 gid_t gid; /* this is a unix gid_t */
627 DOM_SID user_sid; /* Primary User SID */
628 DOM_SID group_sid; /* Primary Group SID */
630 DATA_BLOB lm_pw; /* .data is Null if no password */
631 DATA_BLOB nt_pw; /* .data is Null if no password */
632 DATA_BLOB plaintext_pw; /* .data is Null if not available */
634 uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */
635 uint32 unknown_3; /* 0x00ff ffff */
637 uint16 logon_divs; /* 168 - number of hours in a week */
638 uint32 hours_len; /* normally 21 bytes */
639 uint8 hours[MAX_HOURS_LEN];
641 uint32 unknown_5; /* 0x0002 0000 */
642 uint32 unknown_6; /* 0x0000 04ec */
645 /* Lets see if the remaining code can get the hint that you
646 are meant to use the pdb_...() functions. */
651 * Flags for account policy.
653 #define AP_MIN_PASSWORD_LEN 1
654 #define AP_PASSWORD_HISTORY 2
655 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
656 #define AP_MAX_PASSWORD_AGE 4
657 #define AP_MIN_PASSWORD_AGE 5
658 #define AP_LOCK_ACCOUNT_DURATION 6
659 #define AP_RESET_COUNT_TIME 7
660 #define AP_BAD_ATTEMPT_LOCKOUT 8
661 #define AP_TIME_TO_LOGOUT 9
665 * Flags for local user manipulation.
668 #define LOCAL_ADD_USER 0x1
669 #define LOCAL_DELETE_USER 0x2
670 #define LOCAL_DISABLE_USER 0x4
671 #define LOCAL_ENABLE_USER 0x8
672 #define LOCAL_TRUST_ACCOUNT 0x10
673 #define LOCAL_SET_NO_PASSWORD 0x20
674 #define LOCAL_SET_PASSWORD 0x40
675 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
676 #define LOCAL_INTERDOM_ACCOUNT 0x100
677 #define LOCAL_AM_ROOT 0x200 /* Act as root */
679 /* key and data in the connections database - used in smbstatus and smbd */
680 struct connections_key {
686 struct connections_data {
694 char machine[FSTRING_LEN];
699 /* key and data records in the tdb locking database */
705 struct locking_data {
707 int num_share_mode_entries;
708 share_mode_entry dummy; /* Needed for alignment. */
710 /* the following two entries are implicit
711 share_mode_entry modes[num_share_mode_entries];
717 /* the following are used by loadparm for option lists */
720 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
721 P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
726 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
729 /* passed to br lock code */
730 enum brl_type {READ_LOCK, WRITE_LOCK};
737 #define BRLOCK_FN_CAST() \
738 void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
739 enum brl_type lock_type, \
740 br_off start, br_off size)
741 #define BRLOCK_FN(fn) \
742 void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
743 enum brl_type lock_type, \
744 br_off start, br_off size)
751 BOOL (*special)(char *, char **);
752 struct enum_list *enum_list;
768 #define FLAG_BASIC 0x01 /* fundamental options */
769 #define FLAG_SHARE 0x02 /* file sharing options */
770 #define FLAG_PRINT 0x04 /* printing options */
771 #define FLAG_GLOBAL 0x08 /* local options that should be globally settable in SWAT */
772 #define FLAG_DEPRECATED 0x10 /* options that should no longer be used */
773 #define FLAG_HIDE 0x20 /* options that should be hidden in SWAT */
775 #ifndef LOCKING_VERSION
776 #define LOCKING_VERSION 4
777 #endif /* LOCKING_VERSION */
780 /* the basic packet size, assuming no words or bytes */
783 /* offsets into message for common items */
790 #define smb_pidhigh 16
791 #define smb_ss_field 18
817 /* flag defines. CIFS spec 3.1.1 */
818 #define FLAG_SUPPORT_LOCKREAD 0x01
819 #define FLAG_CLIENT_BUF_AVAIL 0x02
820 #define FLAG_RESERVED 0x04
821 #define FLAG_CASELESS_PATHNAMES 0x08
822 #define FLAG_CANONICAL_PATHNAMES 0x10
823 #define FLAG_REQUEST_OPLOCK 0x20
824 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
825 #define FLAG_REPLY 0x80
828 #define SMBmkdir 0x00 /* create directory */
829 #define SMBrmdir 0x01 /* delete directory */
830 #define SMBopen 0x02 /* open file */
831 #define SMBcreate 0x03 /* create file */
832 #define SMBclose 0x04 /* close file */
833 #define SMBflush 0x05 /* flush file */
834 #define SMBunlink 0x06 /* delete file */
835 #define SMBmv 0x07 /* rename file */
836 #define SMBgetatr 0x08 /* get file attributes */
837 #define SMBsetatr 0x09 /* set file attributes */
838 #define SMBread 0x0A /* read from file */
839 #define SMBwrite 0x0B /* write to file */
840 #define SMBlock 0x0C /* lock byte range */
841 #define SMBunlock 0x0D /* unlock byte range */
842 #define SMBctemp 0x0E /* create temporary file */
843 #define SMBmknew 0x0F /* make new file */
844 #define SMBchkpth 0x10 /* check directory path */
845 #define SMBexit 0x11 /* process exit */
846 #define SMBlseek 0x12 /* seek */
847 #define SMBtcon 0x70 /* tree connect */
848 #define SMBtconX 0x75 /* tree connect and X*/
849 #define SMBtdis 0x71 /* tree disconnect */
850 #define SMBnegprot 0x72 /* negotiate protocol */
851 #define SMBdskattr 0x80 /* get disk attributes */
852 #define SMBsearch 0x81 /* search directory */
853 #define SMBsplopen 0xC0 /* open print spool file */
854 #define SMBsplwr 0xC1 /* write to print spool file */
855 #define SMBsplclose 0xC2 /* close print spool file */
856 #define SMBsplretq 0xC3 /* return print queue */
857 #define SMBsends 0xD0 /* send single block message */
858 #define SMBsendb 0xD1 /* send broadcast message */
859 #define SMBfwdname 0xD2 /* forward user name */
860 #define SMBcancelf 0xD3 /* cancel forward */
861 #define SMBgetmac 0xD4 /* get machine name */
862 #define SMBsendstrt 0xD5 /* send start of multi-block message */
863 #define SMBsendend 0xD6 /* send end of multi-block message */
864 #define SMBsendtxt 0xD7 /* send text of multi-block message */
867 #define SMBlockread 0x13 /* Lock a range and read */
868 #define SMBwriteunlock 0x14 /* Unlock a range then write */
869 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
870 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
871 #define SMBwritec 0x20 /* secondary write request */
872 #define SMBwriteclose 0x2c /* write a file then close it */
874 /* dos extended protocol */
875 #define SMBreadBraw 0x1A /* read block raw */
876 #define SMBreadBmpx 0x1B /* read block multiplexed */
877 #define SMBreadBs 0x1C /* read block (secondary response) */
878 #define SMBwriteBraw 0x1D /* write block raw */
879 #define SMBwriteBmpx 0x1E /* write block multiplexed */
880 #define SMBwriteBs 0x1F /* write block (secondary request) */
881 #define SMBwriteC 0x20 /* write complete response */
882 #define SMBsetattrE 0x22 /* set file attributes expanded */
883 #define SMBgetattrE 0x23 /* get file attributes expanded */
884 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
885 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
886 #define SMBtranss 0x26 /* transaction (secondary request/response) */
887 #define SMBioctl 0x27 /* IOCTL */
888 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
889 #define SMBcopy 0x29 /* copy */
890 #define SMBmove 0x2A /* move */
891 #define SMBecho 0x2B /* echo */
892 #define SMBopenX 0x2D /* open and X */
893 #define SMBreadX 0x2E /* read and X */
894 #define SMBwriteX 0x2F /* write and X */
895 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
896 #define SMBffirst 0x82 /* find first */
897 #define SMBfunique 0x83 /* find unique */
898 #define SMBfclose 0x84 /* find close */
899 #define SMBkeepalive 0x85 /* keepalive */
900 #define SMBinvalid 0xFE /* invalid command */
902 /* Extended 2.0 protocol */
903 #define SMBtrans2 0x32 /* TRANS2 protocol set */
904 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
905 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
906 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
907 #define SMBulogoffX 0x74 /* user logoff */
909 /* NT SMB extensions. */
910 #define SMBnttrans 0xA0 /* NT transact */
911 #define SMBnttranss 0xA1 /* NT transact secondary */
912 #define SMBntcreateX 0xA2 /* NT create and X */
913 #define SMBntcancel 0xA4 /* NT cancel */
915 /* These are the TRANS2 sub commands */
916 #define TRANSACT2_OPEN 0
917 #define TRANSACT2_FINDFIRST 1
918 #define TRANSACT2_FINDNEXT 2
919 #define TRANSACT2_QFSINFO 3
920 #define TRANSACT2_SETFSINFO 4
921 #define TRANSACT2_QPATHINFO 5
922 #define TRANSACT2_SETPATHINFO 6
923 #define TRANSACT2_QFILEINFO 7
924 #define TRANSACT2_SETFILEINFO 8
925 #define TRANSACT2_FSCTL 9
926 #define TRANSACT2_IOCTL 0xA
927 #define TRANSACT2_FINDNOTIFYFIRST 0xB
928 #define TRANSACT2_FINDNOTIFYNEXT 0xC
929 #define TRANSACT2_MKDIR 0xD
930 #define TRANSACT2_SESSION_SETUP 0xE
931 #define TRANSACT2_GET_DFS_REFERRAL 0x10
932 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
934 /* These are the NT transact sub commands. */
935 #define NT_TRANSACT_CREATE 1
936 #define NT_TRANSACT_IOCTL 2
937 #define NT_TRANSACT_SET_SECURITY_DESC 3
938 #define NT_TRANSACT_NOTIFY_CHANGE 4
939 #define NT_TRANSACT_RENAME 5
940 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
942 /* Relevant IOCTL codes */
943 #define IOCTL_QUERY_JOB_INFO 0x530060
945 /* these are the trans2 sub fields for primary requests */
946 #define smb_tpscnt smb_vwv0
947 #define smb_tdscnt smb_vwv1
948 #define smb_mprcnt smb_vwv2
949 #define smb_mdrcnt smb_vwv3
950 #define smb_msrcnt smb_vwv4
951 #define smb_flags smb_vwv5
952 #define smb_timeout smb_vwv6
953 #define smb_pscnt smb_vwv9
954 #define smb_psoff smb_vwv10
955 #define smb_dscnt smb_vwv11
956 #define smb_dsoff smb_vwv12
957 #define smb_suwcnt smb_vwv13
958 #define smb_setup smb_vwv14
959 #define smb_setup0 smb_setup
960 #define smb_setup1 (smb_setup+2)
961 #define smb_setup2 (smb_setup+4)
963 /* these are for the secondary requests */
964 #define smb_spscnt smb_vwv2
965 #define smb_spsoff smb_vwv3
966 #define smb_spsdisp smb_vwv4
967 #define smb_sdscnt smb_vwv5
968 #define smb_sdsoff smb_vwv6
969 #define smb_sdsdisp smb_vwv7
970 #define smb_sfid smb_vwv8
972 /* and these for responses */
973 #define smb_tprcnt smb_vwv0
974 #define smb_tdrcnt smb_vwv1
975 #define smb_prcnt smb_vwv3
976 #define smb_proff smb_vwv4
977 #define smb_prdisp smb_vwv5
978 #define smb_drcnt smb_vwv6
979 #define smb_droff smb_vwv7
980 #define smb_drdisp smb_vwv8
982 /* these are for the NT trans primary request. */
983 #define smb_nt_MaxSetupCount smb_vwv0
984 #define smb_nt_Flags (smb_vwv0 + 1)
985 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
986 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
987 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
988 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
989 #define smb_nt_ParameterCount (smb_vwv0 + 19)
990 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
991 #define smb_nt_DataCount (smb_vwv0 + 27)
992 #define smb_nt_DataOffset (smb_vwv0 + 31)
993 #define smb_nt_SetupCount (smb_vwv0 + 35)
994 #define smb_nt_Function (smb_vwv0 + 36)
995 #define smb_nt_SetupStart (smb_vwv0 + 38)
997 /* these are for the NT trans secondary request. */
998 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
999 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1000 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1001 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1002 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1003 #define smb_nts_DataCount (smb_vwv0 + 23)
1004 #define smb_nts_DataOffset (smb_vwv0 + 27)
1005 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1007 /* these are for the NT trans reply. */
1008 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1009 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1010 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1011 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1012 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1013 #define smb_ntr_DataCount (smb_vwv0 + 23)
1014 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1015 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1017 /* these are for the NT create_and_X */
1018 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1019 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1020 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1021 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1022 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1023 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1024 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1025 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1026 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1027 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1028 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1030 /* this is used on a TConX. I'm not sure the name is very helpful though */
1031 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1032 #define SMB_SHARE_IN_DFS 0x0002
1034 /* Named pipe write mode flags. Used in writeX calls. */
1035 #define PIPE_RAW_MODE 0x4
1036 #define PIPE_START_MESSAGE 0x8
1038 /* these are the constants used in the above call. */
1040 /* File Specific access rights. */
1041 #define FILE_READ_DATA 0x001
1042 #define FILE_WRITE_DATA 0x002
1043 #define FILE_APPEND_DATA 0x004
1044 #define FILE_READ_EA 0x008
1045 #define FILE_WRITE_EA 0x010
1046 #define FILE_EXECUTE 0x020
1047 #define FILE_DELETE_CHILD 0x040
1048 #define FILE_READ_ATTRIBUTES 0x080
1049 #define FILE_WRITE_ATTRIBUTES 0x100
1051 #define FILE_ALL_ACCESS 0x1FF
1053 /* the desired access to use when opening a pipe */
1054 #define DESIRED_ACCESS_PIPE 0x2019f
1056 /* Generic access masks & rights. */
1057 #define SPECIFIC_RIGHTS_MASK 0x00FFFFL
1058 #define STANDARD_RIGHTS_MASK 0xFF0000L
1059 #define DELETE_ACCESS (1L<<16) /* 0x00010000 */
1060 #define READ_CONTROL_ACCESS (1L<<17) /* 0x00020000 */
1061 #define WRITE_DAC_ACCESS (1L<<18) /* 0x00040000 */
1062 #define WRITE_OWNER_ACCESS (1L<<19) /* 0x00080000 */
1063 #define SYNCHRONIZE_ACCESS (1L<<20) /* 0x00100000 */
1065 /* Combinations of standard masks. */
1066 #define STANDARD_RIGHTS_ALL_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS|SYNCHRONIZE_ACCESS) /* 0x001f0000 */
1067 #define STANDARD_RIGHTS_EXECUTE_ACCESS (READ_CONTROL_ACCESS) /* 0x00020000 */
1068 #define STANDARD_RIGHTS_READ_ACCESS (READ_CONTROL_ACCESS) /* 0x00200000 */
1069 #define STANDARD_RIGHTS_REQUIRED_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS) /* 0x000f0000 */
1070 #define STANDARD_RIGHTS_WRITE_ACCESS (READ_CONTROL_ACCESS) /* 0x00020000 */
1072 #define SYSTEM_SECURITY_ACCESS (1L<<24) /* 0x01000000 */
1073 #define MAXIMUM_ALLOWED_ACCESS (1L<<25) /* 0x02000000 */
1074 #define GENERIC_ALL_ACCESS (1<<28) /* 0x10000000 */
1075 #define GENERIC_EXECUTE_ACCESS (1<<29) /* 0x20000000 */
1076 #define GENERIC_WRITE_ACCESS (1<<30) /* 0x40000000 */
1077 #define GENERIC_READ_ACCESS (((unsigned)1)<<31) /* 0x80000000 */
1079 /* Mapping of generic access rights for files to specific rights. */
1081 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1083 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1084 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1086 #define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1087 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1089 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1090 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1092 /* Mapping of access rights to UNIX perms. */
1093 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1094 #define UNIX_ACCESS_R FILE_GENERIC_READ
1095 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1096 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1100 * This is the old mapping we used to use. To get W2KSP2 profiles
1101 * working we need to map to the canonical file perms.
1103 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1104 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1105 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1106 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1107 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1108 FILE_APPEND_DATA|FILE_WRITE_DATA)
1109 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1110 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1113 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1116 #define REQUEST_OPLOCK 2
1117 #define REQUEST_BATCH_OPLOCK 4
1118 #define OPEN_DIRECTORY 8
1120 /* ShareAccess field. */
1121 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1122 #define FILE_SHARE_READ 1
1123 #define FILE_SHARE_WRITE 2
1124 #define FILE_SHARE_DELETE 4
1126 /* FileAttributesField */
1127 #define FILE_ATTRIBUTE_READONLY aRONLY
1128 #define FILE_ATTRIBUTE_HIDDEN aHIDDEN
1129 #define FILE_ATTRIBUTE_SYSTEM aSYSTEM
1130 #define FILE_ATTRIBUTE_DIRECTORY aDIR
1131 #define FILE_ATTRIBUTE_ARCHIVE aARCH
1132 #define FILE_ATTRIBUTE_NORMAL 0x80L
1133 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1134 #define FILE_ATTRIBUTE_SPARSE 0x200L
1135 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1136 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1137 #define SAMBA_ATTRIBUTES_MASK 0x7F
1139 /* Flags - combined with attributes. */
1140 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1141 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1142 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1143 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1144 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1145 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1146 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1148 /* CreateDisposition field. */
1149 #define FILE_SUPERSEDE 0
1151 #define FILE_CREATE 2
1152 #define FILE_OPEN_IF 3
1153 #define FILE_OVERWRITE 4
1154 #define FILE_OVERWRITE_IF 5
1156 /* CreateOptions field. */
1157 #define FILE_DIRECTORY_FILE 0x0001
1158 #define FILE_WRITE_THROUGH 0x0002
1159 #define FILE_SEQUENTIAL_ONLY 0x0004
1160 #define FILE_NON_DIRECTORY_FILE 0x0040
1161 #define FILE_NO_EA_KNOWLEDGE 0x0200
1162 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1163 #define FILE_RANDOM_ACCESS 0x0800
1164 #define FILE_DELETE_ON_CLOSE 0x1000
1166 /* Responses when opening a file. */
1167 #define FILE_WAS_OPENED 1
1168 #define FILE_WAS_CREATED 2
1169 #define FILE_WAS_OVERWRITTEN 3
1171 /* File type flags */
1172 #define FILE_TYPE_DISK 0
1173 #define FILE_TYPE_BYTE_MODE_PIPE 1
1174 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1175 #define FILE_TYPE_PRINTER 3
1176 #define FILE_TYPE_COMM_DEVICE 4
1177 #define FILE_TYPE_UNKNOWN 0xFFFF
1179 /* Flag for NT transact rename call. */
1180 #define RENAME_REPLACE_IF_EXISTS 1
1182 /* Filesystem Attributes. */
1183 #define FILE_CASE_SENSITIVE_SEARCH 0x01
1184 #define FILE_CASE_PRESERVED_NAMES 0x02
1185 #define FILE_UNICODE_ON_DISK 0x04
1186 /* According to cifs9f, this is 4, not 8 */
1187 /* Acconding to testing, this actually sets the security attribute! */
1188 #define FILE_PERSISTENT_ACLS 0x08
1189 /* These entries added from cifs9f --tsb */
1190 #define FILE_FILE_COMPRESSION 0x10
1191 #define FILE_VOLUME_QUOTAS 0x20
1192 /* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */
1193 #define FILE_VOLUME_SPARSE_FILE 0x40
1194 #define FILE_VOLUME_IS_COMPRESSED 0x8000
1196 /* ChangeNotify flags. */
1197 #define FILE_NOTIFY_CHANGE_FILE 0x001
1198 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1199 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1200 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1201 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1202 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1203 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1204 #define FILE_NOTIFY_CHANGE_EA 0x080
1205 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1206 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200
1208 /* where to find the base of the SMB packet proper */
1209 #define smb_base(buf) (((char *)(buf))+4)
1211 /* we don't allow server strings to be longer than 48 characters as
1212 otherwise NT will not honour the announce packets */
1213 #define MAX_SERVER_STRING_LENGTH 48
1216 #define SMB_SUCCESS 0 /* The request was successful. */
1219 void dfs_unlogin(void);
1220 extern int dcelogin_atmost_once;
1224 char *strdup(char *s);
1228 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1235 /* these are used in NetServerEnum to choose what to receive */
1236 #define SV_TYPE_WORKSTATION 0x00000001
1237 #define SV_TYPE_SERVER 0x00000002
1238 #define SV_TYPE_SQLSERVER 0x00000004
1239 #define SV_TYPE_DOMAIN_CTRL 0x00000008
1240 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
1241 #define SV_TYPE_TIME_SOURCE 0x00000020
1242 #define SV_TYPE_AFP 0x00000040
1243 #define SV_TYPE_NOVELL 0x00000080
1244 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
1245 #define SV_TYPE_PRINTQ_SERVER 0x00000200
1246 #define SV_TYPE_DIALIN_SERVER 0x00000400
1247 #define SV_TYPE_SERVER_UNIX 0x00000800
1248 #define SV_TYPE_NT 0x00001000
1249 #define SV_TYPE_WFW 0x00002000
1250 #define SV_TYPE_SERVER_MFPN 0x00004000
1251 #define SV_TYPE_SERVER_NT 0x00008000
1252 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
1253 #define SV_TYPE_BACKUP_BROWSER 0x00020000
1254 #define SV_TYPE_MASTER_BROWSER 0x00040000
1255 #define SV_TYPE_DOMAIN_MASTER 0x00080000
1256 #define SV_TYPE_SERVER_OSF 0x00100000
1257 #define SV_TYPE_SERVER_VMS 0x00200000
1258 #define SV_TYPE_WIN95_PLUS 0x00400000
1259 #define SV_TYPE_DFS_SERVER 0x00800000
1260 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
1261 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
1262 #define SV_TYPE_DOMAIN_ENUM 0x80000000
1263 #define SV_TYPE_ALL 0xFFFFFFFF
1265 /* This was set by JHT in liaison with Jeremy Allison early 1997
1267 * Version 4.0 - never made public
1268 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1269 * - Reappeared in 1.9.16p11 with fixed smbd services
1270 * Version 4.20 - To indicate that nmbd and browsing now works better
1271 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1273 * Note: In the presence of NT4.X do not set above 4.9
1274 * Setting this above 4.9 can have undesired side-effects.
1275 * This may change again in Samba-3.0 after further testing. JHT
1278 #define DEFAULT_MAJOR_VERSION 0x04
1279 #define DEFAULT_MINOR_VERSION 0x05
1281 /* Browser Election Values */
1282 #define BROWSER_ELECTION_VERSION 0x010f
1283 #define BROWSER_CONSTANT 0xaa55
1285 /* Sercurity mode bits. */
1286 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1287 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1288 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1289 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1291 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1293 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1294 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1295 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1296 #define FLAGS2_IS_LONG_NAME 0x0040
1297 #define FLAGS2_EXTENDED_SECURITY 0x0800
1298 #define FLAGS2_DFS_PATHNAMES 0x1000
1299 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000
1300 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1301 #define FLAGS2_UNICODE_STRINGS 0x8000
1303 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1305 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1307 #define CAP_RAW_MODE 0x0001
1308 #define CAP_MPX_MODE 0x0002
1309 #define CAP_UNICODE 0x0004
1310 #define CAP_LARGE_FILES 0x0008
1311 #define CAP_NT_SMBS 0x0010
1312 #define CAP_RPC_REMOTE_APIS 0x0020
1313 #define CAP_STATUS32 0x0040
1314 #define CAP_LEVEL_II_OPLOCKS 0x0080
1315 #define CAP_LOCK_AND_READ 0x0100
1316 #define CAP_NT_FIND 0x0200
1317 #define CAP_DFS 0x1000
1318 #define CAP_W2K_SMBS 0x2000
1319 #define CAP_LARGE_READX 0x4000
1320 #define CAP_LARGE_WRITEX 0x8000
1321 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1322 #define CAP_EXTENDED_SECURITY 0x80000000
1324 /* protocol types. It assumes that higher protocols include lower protocols
1326 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1328 /* security levels */
1329 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1340 /* printing types */
1341 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1342 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1343 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2
1345 ,PRINT_TEST,PRINT_VLP
1346 #endif /* DEVELOPER */
1349 /* LDAP schema types */
1350 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1352 /* LDAP SSL options */
1353 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1355 /* Remote architectures we know about. */
1356 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT, RA_WIN2K, RA_SAMBA};
1359 enum case_handling {CASE_LOWER,CASE_UPPER};
1362 * Global value meaing that the smb_uid field should be
1363 * ingored (in share level security and protocol level == CORE)
1366 #define UID_FIELD_INVALID 0
1367 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1370 * Size of buffer to use when moving files across filesystems.
1372 #define COPYBUF_SIZE (8*1024)
1375 * Values used to override error codes.
1377 extern int unix_ERR_class;
1378 extern int unix_ERR_code;
1381 * Used in chaining code.
1383 extern int chain_size;
1386 * Map the Core and Extended Oplock requesst bits down
1387 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1393 #define CORE_OPLOCK_REQUEST(inbuf) \
1394 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1397 * Extended protocol.
1399 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1402 #define LOCKING_ANDX_SHARED_LOCK 0x1
1403 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1404 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1405 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1406 #define LOCKING_ANDX_LARGE_FILES 0x10
1409 #define OPLOCKLEVEL_NONE 0
1410 #define OPLOCKLEVEL_II 1
1413 * Bits we test with.
1417 #define EXCLUSIVE_OPLOCK 1
1418 #define BATCH_OPLOCK 2
1419 #define LEVEL_II_OPLOCK 4
1421 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK))
1422 #define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK)
1423 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK)
1425 #define CORE_OPLOCK_GRANTED (1<<5)
1426 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1429 * Return values for oplock types.
1432 #define NO_OPLOCK_RETURN 0
1433 #define EXCLUSIVE_OPLOCK_RETURN 1
1434 #define BATCH_OPLOCK_RETURN 2
1435 #define LEVEL_II_OPLOCK_RETURN 3
1438 * Loopback command offsets.
1441 #define OPBRK_CMD_LEN_OFFSET 0
1442 #define OPBRK_CMD_PORT_OFFSET 4
1443 #define OPBRK_CMD_HEADER_LEN 6
1445 #define OPBRK_MESSAGE_CMD_OFFSET 0
1448 * Oplock break command code to send over the udp socket.
1449 * The same message is sent for both exlusive and level II breaks.
1451 * The form of this is :
1453 * 0 2 2+pid 2+pid+dev 2+pid+dev+ino
1454 * +----+--------+-------+--------+---------+
1455 * | cmd| pid | dev | inode | fileid |
1456 * +----+--------+-------+--------+---------+
1459 #define OPLOCK_BREAK_CMD 0x1
1460 #define OPLOCK_BREAK_PID_OFFSET 2
1461 #define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t))
1462 #define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1463 #define OPLOCK_BREAK_FILEID_OFFSET (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1464 #define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1466 #define KERNEL_OPLOCK_BREAK_CMD 0x2
1467 #define LEVEL_II_OPLOCK_BREAK_CMD 0x3
1470 * Capabilities abstracted for different systems.
1473 #define KERNEL_OPLOCK_CAPABILITY 0x1
1476 * Oplock break command code sent via the kernel interface (if it exists).
1480 * 0 2 2+devsize 2+devsize+inodesize
1481 * +----+--------+--------+----------+
1482 * | cmd| dev | inode | fileid |
1483 * +----+--------+--------+----------+
1485 #define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2
1486 #define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1487 #define KERNEL_OPLOCK_BREAK_FILEID_OFFSET (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1488 #define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1491 /* if a kernel does support oplocks then a structure of the following
1492 typee is used to describe how to interact with the kernel */
1493 struct kernel_oplocks {
1494 BOOL (*receive_message)(fd_set *fds, char *buffer, int buffer_len);
1495 BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
1496 void (*release_oplock)(files_struct *fsp);
1497 BOOL (*parse_message)(char *msg_start, int msg_len, SMB_INO_T *inode, SMB_DEV_T *dev, unsigned long *file_id);
1498 BOOL (*msg_waiting)(fd_set *fds);
1499 int notification_fd;
1503 #define CMD_REPLY 0x8000
1505 /* this structure defines the functions for doing change notify in
1506 various implementations */
1507 struct cnotify_fns {
1508 void * (*register_notify)(connection_struct *conn, char *path, uint32 flags);
1509 BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t);
1510 void (*remove_notify)(void *data);
1516 #include "smb_macros.h"
1518 /* A netbios name structure. */
1522 unsigned int name_type;
1526 /* A netbios node status array element. */
1527 struct node_status {
1530 unsigned char flags;
1541 uchar smb_lm_pwd[16];
1542 uchar smb_nt_pwd[16];
1544 uchar smb_lm_owf[24];
1545 uchar smb_nt_owf[128];
1548 uchar lm_cli_chal[8];
1549 uchar nt_cli_chal[128];
1550 size_t nt_cli_chal_len;
1555 #include "rpc_creds.h"
1556 #include "rpc_misc.h"
1557 #include "rpc_secdes.h"
1558 #include "nt_printing.h"
1560 typedef struct user_struct
1562 struct user_struct *next, *prev;
1563 uint16 vuid; /* Tag for this entry. */
1564 uid_t uid; /* uid of a validated user */
1565 gid_t gid; /* gid of a validated user */
1567 userdom_struct user;
1574 /* following groups stuff added by ih */
1575 /* This groups info is needed for when we become_user() for this uid */
1579 NT_USER_TOKEN *nt_user_token;
1581 uint8 session_key[16];
1583 int session_id; /* used by utmp and pam session code */
1590 struct unix_error_map {
1597 #include "ntdomain.h"
1602 * Size of new password account encoding string. This is enough space to
1603 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1604 * Do not change unless you are adding new ACB bits!
1607 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1610 Do you want session setups at user level security with a invalid
1611 password to be rejected or allowed in as guest? WinNT rejects them
1612 but it can be a pain as it means "net view" needs to use a password
1614 You have 3 choices in the setting of map_to_guest:
1616 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1617 are rejected. This is the default.
1619 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1620 are rejected, unless the username does not exist, in which case it
1621 is treated as a guest login
1623 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1624 are treated as a guest login
1626 Note that map_to_guest only has an effect in user or server
1630 #define NEVER_MAP_TO_GUEST 0
1631 #define MAP_TO_GUEST_ON_BAD_USER 1
1632 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1634 #define SAFE_NETBIOS_CHARS ". -_"
1636 #include "nsswitch/winbindd_nss.h"
1638 /* generic iconv conversion structure */
1640 size_t (*direct)(void *cd, char **inbuf, size_t *inbytesleft,
1641 char **outbuf, size_t *outbytesleft);
1642 size_t (*pull)(void *cd, char **inbuf, size_t *inbytesleft,
1643 char **outbuf, size_t *outbytesleft);
1644 size_t (*push)(void *cd, char **inbuf, size_t *inbytesleft,
1645 char **outbuf, size_t *outbytesleft);
1646 void *cd_direct, *cd_pull, *cd_push;
1647 char *from_name, *to_name;
1650 /* The maximum length of a trust account password.
1651 Used when we randomly create it, 15 char passwords
1652 exceed NT4's max password length */
1654 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14