2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
29 /* logged when starting the various Samba daemons */
30 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2008"
33 #if defined(LARGE_SMB_OFF_T)
34 #define BUFFER_SIZE (128*1024)
35 #else /* no large readwrite possible */
36 #define BUFFER_SIZE (0xFFFF)
39 #define SAFETY_MARGIN 1024
40 #define LARGE_WRITEX_HDR_SIZE 65
43 #define DGRAM_PORT 138
46 #define SMB_PORTS "445 139"
48 #define Undefined (-1)
56 #ifndef DEF_CREATE_MASK
57 #define DEF_CREATE_MASK (0755)
60 /* string manipulation flags - see clistr.c and srvstr.c */
61 #define STR_TERMINATE 1
65 #define STR_NOALIGN 16
66 #define STR_TERMINATE_ASCII 128
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 enum smb_read_errors {
80 SMB_WRITE_ERROR, /* This error code can go into the client smb_rw_error. */
83 SMB_DO_NOT_DO_TDIS, /* cli_close_connection() check for this when smbfs wants to keep tree connected */
87 #define DIR_STRUCT_SIZE 43
89 /* these define the attribute byte as seen by DOS */
90 #define aRONLY (1L<<0) /* 0x01 */
91 #define aHIDDEN (1L<<1) /* 0x02 */
92 #define aSYSTEM (1L<<2) /* 0x04 */
93 #define aVOLID (1L<<3) /* 0x08 */
94 #define aDIR (1L<<4) /* 0x10 */
95 #define aARCH (1L<<5) /* 0x20 */
106 #define DOS_OPEN_RDONLY 0
107 #define DOS_OPEN_WRONLY 1
108 #define DOS_OPEN_RDWR 2
109 #define DOS_OPEN_EXEC 3
110 #define DOS_OPEN_FCB 0xF
112 /* define shifts and masks for share and open modes. */
113 #define OPENX_MODE_MASK 0xF
114 #define DENY_MODE_SHIFT 4
115 #define DENY_MODE_MASK 0x7
116 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
117 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
119 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
121 /* Sync on open file (not sure if used anymore... ?) */
122 #define FILE_SYNC_OPENMODE (1<<14)
123 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
125 /* open disposition values */
126 #define OPENX_FILE_EXISTS_FAIL 0
127 #define OPENX_FILE_EXISTS_OPEN 1
128 #define OPENX_FILE_EXISTS_TRUNCATE 2
130 /* mask for open disposition. */
131 #define OPENX_FILE_OPEN_MASK 0x3
133 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
134 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
136 /* The above can be OR'ed with... */
137 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
138 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
140 #include "../libcli/util/doserr.h"
142 typedef union unid_t {
148 * SMB UCS2 (16-bit unicode) internal type.
149 * smb_ucs2_t is *always* in little endian format.
152 typedef uint16 smb_ucs2_t;
154 #ifdef WORDS_BIGENDIAN
160 /* turn a 7 bit character into a ucs2 character */
161 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
163 /* return an ascii version of a ucs2 character */
164 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
166 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
167 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
168 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
170 /* Large data type for manipulating uint32 unicode codepoints */
171 typedef uint32 codepoint_t;
172 #define INVALID_CODEPOINT ((codepoint_t)-1)
174 /* pipe string names */
175 #define PIPE_LANMAN "\\PIPE\\LANMAN"
177 #define MAX_HOURS_LEN 32
180 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
183 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
185 #define LOOKUP_NAME_NONE 0x00000000
186 #define LOOKUP_NAME_ISOLATED 0x00000001 /* Look up unqualified names */
187 #define LOOKUP_NAME_REMOTE 0x00000002 /* Ask others */
188 #define LOOKUP_NAME_GROUP 0x00000004 /* (unused) This is a NASTY hack for
189 valid users = @foo where foo also
190 exists in as user. */
191 #define LOOKUP_NAME_EXPLICIT 0x00000008 /* Only include
192 explicitly mapped names and not
193 the Unix {User,Group} domain */
194 #define LOOKUP_NAME_BUILTIN 0x00000010 /* builtin names */
195 #define LOOKUP_NAME_WKN 0x00000020 /* well known names */
196 #define LOOKUP_NAME_DOMAIN 0x00000040 /* only lookup own domain */
197 #define LOOKUP_NAME_LOCAL (LOOKUP_NAME_ISOLATED\
198 |LOOKUP_NAME_BUILTIN\
201 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED\
203 |LOOKUP_NAME_BUILTIN\
208 * @brief Security Identifier
210 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
212 typedef struct dom_sid {
213 uint8 sid_rev_num; /**< SID revision number */
214 uint8 num_auths; /**< Number of sub-authorities */
215 uint8 id_auth[6]; /**< Identifier Authority */
217 * Pointer to sub-authorities.
219 * @note The values in these uint32's are in *native* byteorder, not
220 * neccessarily little-endian...... JRA.
222 uint32 sub_auths[MAXSUBAUTHS];
233 ID_TYPE_NOT_SPECIFIED = 0,
246 enum id_mapping status;
249 #include "librpc/gen_ndr/misc.h"
250 #include "librpc/gen_ndr/security.h"
251 #include "librpc/ndr/libndr.h"
252 #include "librpc/gen_ndr/lsa.h"
253 #include "librpc/gen_ndr/dfs.h"
254 #include "librpc/gen_ndr/winreg.h"
255 #include "librpc/gen_ndr/initshutdown.h"
256 #include "librpc/gen_ndr/eventlog.h"
257 #include "librpc/gen_ndr/srvsvc.h"
258 #include "librpc/gen_ndr/wkssvc.h"
259 #include "librpc/gen_ndr/echo.h"
260 #include "librpc/gen_ndr/svcctl.h"
261 #include "librpc/gen_ndr/netlogon.h"
262 #include "librpc/gen_ndr/samr.h"
263 #include "librpc/gen_ndr/dssetup.h"
264 #include "librpc/gen_ndr/epmapper.h"
265 #include "librpc/gen_ndr/libnet_join.h"
266 #include "librpc/gen_ndr/krb5pac.h"
267 #include "librpc/gen_ndr/ntsvcs.h"
268 #include "librpc/gen_ndr/nbt.h"
269 #include "librpc/gen_ndr/drsuapi.h"
270 #include "librpc/gen_ndr/drsblobs.h"
272 struct lsa_dom_info {
280 struct lsa_name_info {
282 enum lsa_SidType type;
287 /* Some well-known SIDs */
288 extern const DOM_SID global_sid_World_Domain;
289 extern const DOM_SID global_sid_World;
290 extern const DOM_SID global_sid_Creator_Owner_Domain;
291 extern const DOM_SID global_sid_NT_Authority;
292 extern const DOM_SID global_sid_System;
293 extern const DOM_SID global_sid_NULL;
294 extern const DOM_SID global_sid_Authenticated_Users;
295 extern const DOM_SID global_sid_Network;
296 extern const DOM_SID global_sid_Creator_Owner;
297 extern const DOM_SID global_sid_Creator_Group;
298 extern const DOM_SID global_sid_Anonymous;
299 extern const DOM_SID global_sid_Builtin;
300 extern const DOM_SID global_sid_Builtin_Administrators;
301 extern const DOM_SID global_sid_Builtin_Users;
302 extern const DOM_SID global_sid_Builtin_Guests;
303 extern const DOM_SID global_sid_Builtin_Power_Users;
304 extern const DOM_SID global_sid_Builtin_Account_Operators;
305 extern const DOM_SID global_sid_Builtin_Server_Operators;
306 extern const DOM_SID global_sid_Builtin_Print_Operators;
307 extern const DOM_SID global_sid_Builtin_Backup_Operators;
308 extern const DOM_SID global_sid_Builtin_Replicator;
309 extern const DOM_SID global_sid_Builtin_PreWin2kAccess;
310 extern const DOM_SID global_sid_Unix_Users;
311 extern const DOM_SID global_sid_Unix_Groups;
314 * The complete list of SIDS belonging to this user.
315 * Created when a vuid is registered.
316 * The definition of the user_sids array is as follows :
318 * token->user_sids[0] = primary user SID.
319 * token->user_sids[1] = primary group SID.
320 * token->user_sids[2..num_sids] = supplementary group SIDS.
323 #define PRIMARY_USER_SID_INDEX 0
324 #define PRIMARY_GROUP_SID_INDEX 1
326 typedef struct nt_user_token {
332 typedef struct unix_user_token {
339 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
340 typedef struct time_info {
344 typedef struct write_cache {
353 smb_ucs2_t *origname;
354 smb_ucs2_t *filename;
355 SMB_STRUCT_STAT *statinfo;
358 #include "fake_file.h"
363 uint64_t position_information;
365 uint32 private_options; /* NT Create options, but we only look at
366 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
367 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
368 * for print files *only*, where
369 * DELETE_ON_CLOSE is not stored in the share
372 unsigned long gen_id;
375 struct event_context;
379 struct share_mode_entry;
384 struct vfs_fsp_data {
385 struct vfs_fsp_data *next;
386 struct vfs_handle_struct *owner;
387 /* NOTE: This structure contains two pointers so that we can guarantee
388 * that the end of the structure is always both 4-byte and 8-byte aligned.
392 /* the basic packet size, assuming no words or bytes */
395 struct notify_change {
400 struct notify_mid_map;
403 struct notify_change_request;
404 struct sys_notify_backend;
405 struct sys_notify_context {
406 struct event_context *ev;
407 struct connection_struct *conn;
408 void *private_data; /* For use by the system backend */
411 struct notify_change_buf {
413 * If no requests are pending, changes are queued here. Simple array,
418 * num_changes == -1 means that we have got a catch-all change, when
419 * asked we just return NT_STATUS_OK without specific changes.
422 struct notify_change *changes;
425 * If no changes are around requests are queued here. Using a linked
426 * list, because we have to append at the end and delete from the top.
428 struct notify_change_request *requests;
431 typedef struct files_struct {
432 struct files_struct *next, *prev;
434 struct connection_struct *conn;
435 struct fd_handle *fh;
436 unsigned int num_smb_operations;
437 uint16 rap_print_jobid;
438 struct file_id file_id;
439 uint64_t initial_allocation_size; /* Faked up initial allocation on disk. */
444 struct timeval open_time;
445 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
446 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
448 bool update_write_time_triggered;
449 struct timed_event *update_write_time_event;
450 bool update_write_time_on_close;
451 struct timespec close_write_time;
452 bool write_time_forced;
455 int sent_oplock_break;
456 struct timed_event *oplock_timeout;
457 struct lock_struct last_lock_failure;
458 int current_lock_count; /* Count the number of outstanding locks and pending locks. */
460 struct share_mode_entry *pending_break_messages;
461 int num_pending_break_messages;
469 bool aio_write_behind;
471 bool initial_delete_on_close; /* Only set at NTCreateX if file was created. */
475 struct vfs_fsp_data *vfs_extension;
476 struct fake_file_handle *fake_file_handle;
478 struct notify_change_buf *notify;
480 struct files_struct *base_fsp; /* placeholder for delete on close */
483 #include "ntquotas.h"
484 #include "sysquotas.h"
486 struct vuid_cache_entry {
487 struct auth_serversupplied_info *server_info;
494 unsigned int next_entry;
495 struct vuid_cache_entry array[VUID_CACHE_SIZE];
501 } name_compare_entry;
504 struct trans_state *next, *prev;
508 uint32 max_param_return;
509 uint32 max_data_return;
510 uint32 max_setup_return;
512 uint8 cmd; /* SMBtrans or SMBtrans2 */
514 char *name; /* for trans requests */
515 uint16 call; /* for trans2 and nttrans requests */
517 bool close_on_completion;
520 unsigned int setup_count;
523 size_t received_data;
524 size_t received_param;
534 * Info about an alternate data stream
537 struct stream_struct {
539 SMB_OFF_T alloc_size;
543 /* Include VFS stuff */
545 #include "smb_acls.h"
548 struct dfree_cached_info {
549 time_t last_dfree_time;
558 struct share_params {
562 struct share_iterator {
566 typedef struct connection_struct {
567 struct connection_struct *next, *prev;
568 unsigned cnum; /* an index passed over the wire */
569 struct share_params *params;
571 struct vuid_cache vuid_cache;
572 struct dptr_struct *dirptr;
575 bool read_only; /* Attributes for the current user of the share. */
576 bool admin_user; /* Attributes for the current user of the share. */
581 struct vfs_ops vfs; /* Filesystem operations */
582 struct vfs_ops vfs_opaque; /* OPAQUE Filesystem operations */
583 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
586 * This represents the user information on this connection. Depending
587 * on the vuid using this tid, this might change per SMB request.
589 struct auth_serversupplied_info *server_info;
591 char client_address[INET6_ADDRSTRLEN]; /* String version of client IP address. */
593 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
596 time_t lastused_count;
599 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
603 /* Semantics requested by the client or forced by the server config. */
606 bool short_case_preserve;
608 /* Semantics provided by the underlying filesystem. */
611 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
612 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
613 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
614 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
615 struct dfree_cached_info *dfree_info;
616 struct trans_state *pending_trans;
617 struct notify_context *notify_ctx;
620 struct current_user {
621 connection_struct *conn;
624 NT_USER_TOKEN *nt_user_token;
642 connection_struct *conn;
643 struct files_struct *chain_fsp;
646 /* Defines for the sent_oplock_break field above. */
647 #define NO_BREAK_SENT 0
648 #define BREAK_TO_NONE_SENT 1
649 #define LEVEL_II_BREAK_SENT 2
652 fstring smb_name; /* user name from the client */
653 fstring unix_name; /* unix user name of a validated user */
654 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
655 fstring domain; /* domain that the client specified */
658 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
660 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
661 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
663 typedef struct _print_queue_struct {
664 int job; /* normally the UNIX jobid -- see note in
665 printing.c:traverse_fn_delete() */
673 } print_queue_struct;
675 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
681 } print_status_struct;
683 /* used for server information: client, nameserv and ipc */
684 struct server_info_struct {
688 fstring domain; /* used ONLY in ipc.c NOT namework.c */
689 bool server_added; /* used ONLY in ipc.c NOT namework.c */
692 /* used for network interfaces */
694 struct interface *next, *prev;
697 struct sockaddr_storage ip;
698 struct sockaddr_storage netmask;
699 struct sockaddr_storage bcast;
702 /* Internal message queue for deferred opens. */
703 struct pending_message_list {
704 struct pending_message_list *next, *prev;
705 struct timeval request_time; /* When was this first issued? */
706 struct timeval end_time; /* When does this time out? */
709 DATA_BLOB private_data;
712 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
714 /* struct returned by get_share_modes */
715 struct share_mode_entry {
716 struct server_id pid;
719 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
720 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
721 uint32 private_options; /* NT Create options, but we only look at
722 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
723 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
724 * smbstatus and swat */
727 unsigned long share_file_id;
728 uint32 uid; /* uid of file opener. */
729 uint16 flags; /* See SHARE_MODE_XX above. */
732 /* oplock break message definition - linearization of share_mode_entry.
735 0 struct server_id pid 4
738 8 uint32 access_mask 4
739 12 uint32 share_access 4
740 16 uint32 private_options 4
742 24 uint32 time usec 4
743 28 SMB_DEV_T dev 8 bytes.
744 36 SMB_INO_T inode 8 bytes
745 44 unsigned long file_id 4 bytes
746 48 uint32 uid 4 bytes
747 52 uint16 flags 2 bytes
751 #ifdef CLUSTER_SUPPORT
752 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 58
754 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 54
757 struct share_mode_lock {
758 const char *servicepath; /* canonicalized. */
759 const char *filename;
762 struct share_mode_entry *share_modes;
763 UNIX_USER_TOKEN *delete_token;
764 bool delete_on_close;
765 struct timespec old_write_time;
766 struct timespec changed_write_time;
769 struct db_record *record;
773 * Internal structure of locking.tdb share mode db.
774 * Used by locking.c and libsmbsharemodes.c
777 struct locking_data {
780 int num_share_mode_entries;
781 bool delete_on_close;
782 struct timespec old_write_time;
783 struct timespec changed_write_time;
784 uint32 delete_token_size; /* Only valid if either of
785 the two previous fields
788 struct share_mode_entry dummy; /* Needed for alignment. */
790 /* The following four entries are implicit
791 struct share_mode_entry modes[num_share_mode_entries];
792 char unix_token[delete_token_size] (divisible by 4).
798 /* Used to store pipe open records for NetFileEnum() */
800 struct pipe_open_rec {
801 struct server_id pid;
808 #define NT_HASH_LEN 16
809 #define LM_HASH_LEN 16
811 /* Password history contants. */
812 #define PW_HISTORY_SALT_LEN 16
813 #define SALTED_MD5_HASH_LEN 16
814 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
815 #define MAX_PW_HISTORY_LEN 24
818 * Flags for account policy.
820 #define AP_MIN_PASSWORD_LEN 1
821 #define AP_PASSWORD_HISTORY 2
822 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
823 #define AP_MAX_PASSWORD_AGE 4
824 #define AP_MIN_PASSWORD_AGE 5
825 #define AP_LOCK_ACCOUNT_DURATION 6
826 #define AP_RESET_COUNT_TIME 7
827 #define AP_BAD_ATTEMPT_LOCKOUT 8
828 #define AP_TIME_TO_LOGOUT 9
829 #define AP_REFUSE_MACHINE_PW_CHANGE 10
832 * Flags for local user manipulation.
835 #define LOCAL_ADD_USER 0x1
836 #define LOCAL_DELETE_USER 0x2
837 #define LOCAL_DISABLE_USER 0x4
838 #define LOCAL_ENABLE_USER 0x8
839 #define LOCAL_TRUST_ACCOUNT 0x10
840 #define LOCAL_SET_NO_PASSWORD 0x20
841 #define LOCAL_SET_PASSWORD 0x40
842 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
843 #define LOCAL_INTERDOM_ACCOUNT 0x100
844 #define LOCAL_AM_ROOT 0x200 /* Act as root */
846 /* key and data in the connections database - used in smbstatus and smbd */
847 struct connections_key {
848 struct server_id pid;
853 struct connections_data {
855 struct server_id pid;
859 char servicename[FSTRING_LEN];
861 char machine[FSTRING_LEN];
863 uint32 bcast_msg_flags;
867 /* the following are used by loadparm for option lists */
869 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
870 P_STRING,P_USTRING,P_ENUM,P_SEP
874 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
887 bool (*special)(int snum, const char *, char **);
888 const struct enum_list *enum_list;
899 /* The following flags are used in SWAT */
900 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
901 #define FLAG_SHARE 0x0002 /* file sharing options */
902 #define FLAG_PRINT 0x0004 /* printing options */
903 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
904 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
905 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
906 #define FLAG_DEVELOPER 0x0040 /* No longer used */
907 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
908 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
909 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
916 /* offsets into message for common items */
923 #define smb_pidhigh 16
924 #define smb_ss_field 18
950 /* flag defines. CIFS spec 3.1.1 */
951 #define FLAG_SUPPORT_LOCKREAD 0x01
952 #define FLAG_CLIENT_BUF_AVAIL 0x02
953 #define FLAG_RESERVED 0x04
954 #define FLAG_CASELESS_PATHNAMES 0x08
955 #define FLAG_CANONICAL_PATHNAMES 0x10
956 #define FLAG_REQUEST_OPLOCK 0x20
957 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
958 #define FLAG_REPLY 0x80
961 #define SMBmkdir 0x00 /* create directory */
962 #define SMBrmdir 0x01 /* delete directory */
963 #define SMBopen 0x02 /* open file */
964 #define SMBcreate 0x03 /* create file */
965 #define SMBclose 0x04 /* close file */
966 #define SMBflush 0x05 /* flush file */
967 #define SMBunlink 0x06 /* delete file */
968 #define SMBmv 0x07 /* rename file */
969 #define SMBgetatr 0x08 /* get file attributes */
970 #define SMBsetatr 0x09 /* set file attributes */
971 #define SMBread 0x0A /* read from file */
972 #define SMBwrite 0x0B /* write to file */
973 #define SMBlock 0x0C /* lock byte range */
974 #define SMBunlock 0x0D /* unlock byte range */
975 #define SMBctemp 0x0E /* create temporary file */
976 #define SMBmknew 0x0F /* make new file */
977 #define SMBcheckpath 0x10 /* check directory path */
978 #define SMBexit 0x11 /* process exit */
979 #define SMBlseek 0x12 /* seek */
980 #define SMBtcon 0x70 /* tree connect */
981 #define SMBtconX 0x75 /* tree connect and X*/
982 #define SMBtdis 0x71 /* tree disconnect */
983 #define SMBnegprot 0x72 /* negotiate protocol */
984 #define SMBdskattr 0x80 /* get disk attributes */
985 #define SMBsearch 0x81 /* search directory */
986 #define SMBsplopen 0xC0 /* open print spool file */
987 #define SMBsplwr 0xC1 /* write to print spool file */
988 #define SMBsplclose 0xC2 /* close print spool file */
989 #define SMBsplretq 0xC3 /* return print queue */
990 #define SMBsends 0xD0 /* send single block message */
991 #define SMBsendb 0xD1 /* send broadcast message */
992 #define SMBfwdname 0xD2 /* forward user name */
993 #define SMBcancelf 0xD3 /* cancel forward */
994 #define SMBgetmac 0xD4 /* get machine name */
995 #define SMBsendstrt 0xD5 /* send start of multi-block message */
996 #define SMBsendend 0xD6 /* send end of multi-block message */
997 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1000 #define SMBlockread 0x13 /* Lock a range and read */
1001 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1002 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1003 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1004 #define SMBwritec 0x20 /* secondary write request */
1005 #define SMBwriteclose 0x2c /* write a file then close it */
1007 /* dos extended protocol */
1008 #define SMBreadBraw 0x1A /* read block raw */
1009 #define SMBreadBmpx 0x1B /* read block multiplexed */
1010 #define SMBreadBs 0x1C /* read block (secondary response) */
1011 #define SMBwriteBraw 0x1D /* write block raw */
1012 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1013 #define SMBwriteBs 0x1F /* write block (secondary request) */
1014 #define SMBwriteC 0x20 /* write complete response */
1015 #define SMBsetattrE 0x22 /* set file attributes expanded */
1016 #define SMBgetattrE 0x23 /* get file attributes expanded */
1017 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1018 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1019 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1020 #define SMBioctl 0x27 /* IOCTL */
1021 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1022 #define SMBcopy 0x29 /* copy */
1023 #define SMBmove 0x2A /* move */
1024 #define SMBecho 0x2B /* echo */
1025 #define SMBopenX 0x2D /* open and X */
1026 #define SMBreadX 0x2E /* read and X */
1027 #define SMBwriteX 0x2F /* write and X */
1028 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1029 #define SMBffirst 0x82 /* find first */
1030 #define SMBfunique 0x83 /* find unique */
1031 #define SMBfclose 0x84 /* find close */
1032 #define SMBkeepalive 0x85 /* keepalive */
1033 #define SMBinvalid 0xFE /* invalid command */
1035 /* Extended 2.0 protocol */
1036 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1037 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1038 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1039 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1040 #define SMBulogoffX 0x74 /* user logoff */
1042 /* NT SMB extensions. */
1043 #define SMBnttrans 0xA0 /* NT transact */
1044 #define SMBnttranss 0xA1 /* NT transact secondary */
1045 #define SMBntcreateX 0xA2 /* NT create and X */
1046 #define SMBntcancel 0xA4 /* NT cancel */
1047 #define SMBntrename 0xA5 /* NT rename */
1049 /* These are the trans subcommands */
1050 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1051 #define TRANSACT_DCERPCCMD 0x26
1052 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1054 /* These are the TRANS2 sub commands */
1055 #define TRANSACT2_OPEN 0x00
1056 #define TRANSACT2_FINDFIRST 0x01
1057 #define TRANSACT2_FINDNEXT 0x02
1058 #define TRANSACT2_QFSINFO 0x03
1059 #define TRANSACT2_SETFSINFO 0x04
1060 #define TRANSACT2_QPATHINFO 0x05
1061 #define TRANSACT2_SETPATHINFO 0x06
1062 #define TRANSACT2_QFILEINFO 0x07
1063 #define TRANSACT2_SETFILEINFO 0x08
1064 #define TRANSACT2_FSCTL 0x09
1065 #define TRANSACT2_IOCTL 0x0A
1066 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1067 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1068 #define TRANSACT2_MKDIR 0x0D
1069 #define TRANSACT2_SESSION_SETUP 0x0E
1070 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1071 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1073 /* These are the NT transact sub commands. */
1074 #define NT_TRANSACT_CREATE 1
1075 #define NT_TRANSACT_IOCTL 2
1076 #define NT_TRANSACT_SET_SECURITY_DESC 3
1077 #define NT_TRANSACT_NOTIFY_CHANGE 4
1078 #define NT_TRANSACT_RENAME 5
1079 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1080 #define NT_TRANSACT_GET_USER_QUOTA 7
1081 #define NT_TRANSACT_SET_USER_QUOTA 8
1083 /* These are the NT transact_get_user_quota sub commands */
1084 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1085 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1086 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1088 /* Relevant IOCTL codes */
1089 #define IOCTL_QUERY_JOB_INFO 0x530060
1091 /* these are the trans2 sub fields for primary requests */
1092 #define smb_tpscnt smb_vwv0
1093 #define smb_tdscnt smb_vwv1
1094 #define smb_mprcnt smb_vwv2
1095 #define smb_mdrcnt smb_vwv3
1096 #define smb_msrcnt smb_vwv4
1097 #define smb_flags smb_vwv5
1098 #define smb_timeout smb_vwv6
1099 #define smb_pscnt smb_vwv9
1100 #define smb_psoff smb_vwv10
1101 #define smb_dscnt smb_vwv11
1102 #define smb_dsoff smb_vwv12
1103 #define smb_suwcnt smb_vwv13
1104 #define smb_setup smb_vwv14
1105 #define smb_setup0 smb_setup
1106 #define smb_setup1 (smb_setup+2)
1107 #define smb_setup2 (smb_setup+4)
1109 /* these are for the secondary requests */
1110 #define smb_spscnt smb_vwv2
1111 #define smb_spsoff smb_vwv3
1112 #define smb_spsdisp smb_vwv4
1113 #define smb_sdscnt smb_vwv5
1114 #define smb_sdsoff smb_vwv6
1115 #define smb_sdsdisp smb_vwv7
1116 #define smb_sfid smb_vwv8
1118 /* and these for responses */
1119 #define smb_tprcnt smb_vwv0
1120 #define smb_tdrcnt smb_vwv1
1121 #define smb_prcnt smb_vwv3
1122 #define smb_proff smb_vwv4
1123 #define smb_prdisp smb_vwv5
1124 #define smb_drcnt smb_vwv6
1125 #define smb_droff smb_vwv7
1126 #define smb_drdisp smb_vwv8
1128 /* these are for the NT trans primary request. */
1129 #define smb_nt_MaxSetupCount smb_vwv0
1130 #define smb_nt_Flags (smb_vwv0 + 1)
1131 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1132 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1133 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1134 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1135 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1136 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1137 #define smb_nt_DataCount (smb_vwv0 + 27)
1138 #define smb_nt_DataOffset (smb_vwv0 + 31)
1139 #define smb_nt_SetupCount (smb_vwv0 + 35)
1140 #define smb_nt_Function (smb_vwv0 + 36)
1141 #define smb_nt_SetupStart (smb_vwv0 + 38)
1143 /* these are for the NT trans secondary request. */
1144 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1145 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1146 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1147 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1148 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1149 #define smb_nts_DataCount (smb_vwv0 + 23)
1150 #define smb_nts_DataOffset (smb_vwv0 + 27)
1151 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1153 /* these are for the NT trans reply. */
1154 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1155 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1156 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1157 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1158 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1159 #define smb_ntr_DataCount (smb_vwv0 + 23)
1160 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1161 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1163 /* these are for the NT create_and_X */
1164 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1165 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1166 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1167 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1168 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1169 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1170 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1171 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1172 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1173 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1174 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1176 /* this is used on a TConX. I'm not sure the name is very helpful though */
1177 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1178 #define SMB_SHARE_IN_DFS 0x0002
1180 /* Named pipe write mode flags. Used in writeX calls. */
1181 #define PIPE_RAW_MODE 0x4
1182 #define PIPE_START_MESSAGE 0x8
1184 /* File Specific access rights */
1185 #define FILE_READ_DATA 0x00000001
1186 #define FILE_WRITE_DATA 0x00000002
1187 #define FILE_APPEND_DATA 0x00000004
1188 #define FILE_READ_EA 0x00000008 /* File and directory */
1189 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1190 #define FILE_EXECUTE 0x00000020
1191 #define FILE_DELETE_CHILD 0x00000040
1192 #define FILE_READ_ATTRIBUTES 0x00000080
1193 #define FILE_WRITE_ATTRIBUTES 0x00000100
1195 #define FILE_ALL_ACCESS 0x000001FF
1197 /* Directory specific access rights */
1198 #define FILE_LIST_DIRECTORY 0x00000001
1199 #define FILE_ADD_FILE 0x00000002
1200 #define FILE_ADD_SUBDIRECTORY 0x00000004
1201 #define FILE_TRAVERSE 0x00000020
1202 #define FILE_DELETE_CHILD 0x00000040
1204 /* the desired access to use when opening a pipe */
1205 #define DESIRED_ACCESS_PIPE 0x2019f
1207 /* Generic access masks & rights. */
1208 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1209 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1210 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1211 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1212 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1214 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1215 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1216 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1217 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1218 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1219 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1221 /* Mapping of generic access rights for files to specific rights. */
1223 /* This maps to 0x1F01FF */
1224 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1226 /* This maps to 0x120089 */
1227 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1228 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1230 /* This maps to 0x120116 */
1231 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1232 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1234 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1235 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1237 /* Share specific rights. */
1238 #define SHARE_ALL_ACCESS FILE_GENERIC_ALL
1239 #define SHARE_READ_ONLY (FILE_GENERIC_READ|FILE_EXECUTE)
1241 /* Mapping of access rights to UNIX perms. */
1242 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1243 #define UNIX_ACCESS_R FILE_GENERIC_READ
1244 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1245 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1247 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1248 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1249 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1250 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1251 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1255 * This is the old mapping we used to use. To get W2KSP2 profiles
1256 * working we need to map to the canonical file perms.
1258 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1259 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1260 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1261 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1262 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1263 FILE_APPEND_DATA|FILE_WRITE_DATA)
1264 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1265 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1268 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1271 #define REQUEST_OPLOCK 2
1272 #define REQUEST_BATCH_OPLOCK 4
1273 #define OPEN_DIRECTORY 8
1274 #define EXTENDED_RESPONSE_REQUIRED 0x10
1276 /* ShareAccess field. */
1277 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1278 #define FILE_SHARE_READ 1
1279 #define FILE_SHARE_WRITE 2
1280 #define FILE_SHARE_DELETE 4
1282 /* FileAttributesField */
1283 #define FILE_ATTRIBUTE_READONLY 0x001L
1284 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1285 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1286 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1287 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1288 #define FILE_ATTRIBUTE_NORMAL 0x080L
1289 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1290 #define FILE_ATTRIBUTE_SPARSE 0x200L
1291 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1292 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1293 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1294 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1295 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1296 #define SAMBA_ATTRIBUTES_MASK 0x7F
1298 /* Flags - combined with attributes. */
1299 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1300 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1301 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1302 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1303 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1304 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1305 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1307 /* CreateDisposition field. */
1308 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1309 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1310 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1311 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1312 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1313 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1315 /* CreateOptions field. */
1316 #define FILE_DIRECTORY_FILE 0x0001
1317 #define FILE_WRITE_THROUGH 0x0002
1318 #define FILE_SEQUENTIAL_ONLY 0x0004
1319 #define FILE_NON_DIRECTORY_FILE 0x0040
1320 #define FILE_NO_EA_KNOWLEDGE 0x0200
1321 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1322 #define FILE_RANDOM_ACCESS 0x0800
1323 #define FILE_DELETE_ON_CLOSE 0x1000
1324 #define FILE_OPEN_BY_FILE_ID 0x2000
1326 #define NTCREATEX_OPTIONS_MUST_IGNORE_MASK (0x008F0480)
1328 #define NTCREATEX_OPTIONS_INVALID_PARAM_MASK (0xFF100030)
1331 * Private create options used by the ntcreatex processing code. From Samba4.
1332 * We reuse some ignored flags for private use.
1334 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x00010000
1335 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x00020000
1337 /* Private options for streams support */
1338 #define NTCREATEX_OPTIONS_PRIVATE_STREAM_DELETE 0x00040000
1340 /* Responses when opening a file. */
1341 #define FILE_WAS_SUPERSEDED 0
1342 #define FILE_WAS_OPENED 1
1343 #define FILE_WAS_CREATED 2
1344 #define FILE_WAS_OVERWRITTEN 3
1346 /* File type flags */
1347 #define FILE_TYPE_DISK 0
1348 #define FILE_TYPE_BYTE_MODE_PIPE 1
1349 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1350 #define FILE_TYPE_PRINTER 3
1351 #define FILE_TYPE_COMM_DEVICE 4
1352 #define FILE_TYPE_UNKNOWN 0xFFFF
1354 /* Flag for NT transact rename call. */
1355 #define RENAME_REPLACE_IF_EXISTS 1
1357 /* flags for SMBntrename call (from Samba4) */
1358 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1359 #define RENAME_FLAG_HARD_LINK 0x103
1360 #define RENAME_FLAG_RENAME 0x104
1361 #define RENAME_FLAG_COPY 0x105
1363 /* Filesystem Attributes. */
1364 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1365 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1366 #define FILE_UNICODE_ON_DISK 0x00000004
1367 /* According to cifs9f, this is 4, not 8 */
1368 /* Acconding to testing, this actually sets the security attribute! */
1369 #define FILE_PERSISTENT_ACLS 0x00000008
1370 #define FILE_FILE_COMPRESSION 0x00000010
1371 #define FILE_VOLUME_QUOTAS 0x00000020
1372 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1373 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1374 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1375 #define FS_LFN_APIS 0x00004000
1376 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1377 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1378 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1379 #define FILE_NAMED_STREAMS 0x00040000
1380 #define FILE_READ_ONLY_VOLUME 0x00080000
1382 /* ChangeNotify flags. */
1383 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1384 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1385 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1386 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1387 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1388 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1389 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1390 #define FILE_NOTIFY_CHANGE_EA 0x080
1391 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1392 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1393 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1394 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1396 #define FILE_NOTIFY_CHANGE_NAME \
1397 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1399 /* change notify action results */
1400 #define NOTIFY_ACTION_ADDED 1
1401 #define NOTIFY_ACTION_REMOVED 2
1402 #define NOTIFY_ACTION_MODIFIED 3
1403 #define NOTIFY_ACTION_OLD_NAME 4
1404 #define NOTIFY_ACTION_NEW_NAME 5
1405 #define NOTIFY_ACTION_ADDED_STREAM 6
1406 #define NOTIFY_ACTION_REMOVED_STREAM 7
1407 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1410 /* where to find the base of the SMB packet proper */
1411 #define smb_base(buf) (((char *)(buf))+4)
1413 /* we don't allow server strings to be longer than 48 characters as
1414 otherwise NT will not honour the announce packets */
1415 #define MAX_SERVER_STRING_LENGTH 48
1418 #define SMB_SUCCESS 0 /* The request was successful. */
1421 void dfs_unlogin(void);
1422 extern int dcelogin_atmost_once;
1426 char *strdup(char *s);
1430 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1437 /* This was set by JHT in liaison with Jeremy Allison early 1997
1439 * Version 4.0 - never made public
1440 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1441 * - Reappeared in 1.9.16p11 with fixed smbd services
1442 * Version 4.20 - To indicate that nmbd and browsing now works better
1443 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1445 * Note: In the presence of NT4.X do not set above 4.9
1446 * Setting this above 4.9 can have undesired side-effects.
1447 * This may change again in Samba-3.0 after further testing. JHT
1450 #define DEFAULT_MAJOR_VERSION 0x04
1451 #define DEFAULT_MINOR_VERSION 0x09
1453 /* Browser Election Values */
1454 #define BROWSER_ELECTION_VERSION 0x010f
1455 #define BROWSER_CONSTANT 0xaa55
1457 /* Sercurity mode bits. */
1458 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1459 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1460 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1461 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1463 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1465 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1466 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1467 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1468 #define FLAGS2_UNKNOWN_BIT4 0x0010
1469 #define FLAGS2_IS_LONG_NAME 0x0040
1470 #define FLAGS2_EXTENDED_SECURITY 0x0800
1471 #define FLAGS2_DFS_PATHNAMES 0x1000
1472 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1473 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1474 #define FLAGS2_UNICODE_STRINGS 0x8000
1476 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1478 /* TCONX Flag (smb_vwv2). */
1479 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1481 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1483 #define CAP_RAW_MODE 0x0001
1484 #define CAP_MPX_MODE 0x0002
1485 #define CAP_UNICODE 0x0004
1486 #define CAP_LARGE_FILES 0x0008
1487 #define CAP_NT_SMBS 0x0010
1488 #define CAP_RPC_REMOTE_APIS 0x0020
1489 #define CAP_STATUS32 0x0040
1490 #define CAP_LEVEL_II_OPLOCKS 0x0080
1491 #define CAP_LOCK_AND_READ 0x0100
1492 #define CAP_NT_FIND 0x0200
1493 #define CAP_DFS 0x1000
1494 #define CAP_W2K_SMBS 0x2000
1495 #define CAP_LARGE_READX 0x4000
1496 #define CAP_LARGE_WRITEX 0x8000
1497 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1498 #define CAP_EXTENDED_SECURITY 0x80000000
1500 /* protocol types. It assumes that higher protocols include lower protocols
1502 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1504 /* security levels */
1505 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1515 /* printing types */
1516 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1517 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1518 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1519 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1520 ,PRINT_TEST,PRINT_VLP
1521 #endif /* DEVELOPER */
1524 /* LDAP schema types */
1525 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1527 /* LDAP SSL options */
1528 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1530 /* LDAP PASSWD SYNC methods */
1531 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1533 /* Remote architectures we know about. */
1534 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1535 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_VISTA,
1536 RA_SAMBA, RA_CIFSFS, RA_WINXP64};
1539 enum case_handling {CASE_LOWER,CASE_UPPER};
1541 /* ACL compatibility */
1542 enum acl_compatibility {ACL_COMPAT_AUTO, ACL_COMPAT_WINNT, ACL_COMPAT_WIN2K};
1544 * Global value meaing that the smb_uid field should be
1545 * ingored (in share level security and protocol level == CORE)
1548 #define UID_FIELD_INVALID 0
1549 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1552 * Size of buffer to use when moving files across filesystems.
1554 #define COPYBUF_SIZE (8*1024)
1557 * Used in chaining code.
1559 extern int chain_size;
1562 * Map the Core and Extended Oplock requesst bits down
1563 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1569 #define CORE_OPLOCK_REQUEST(inbuf) \
1570 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1573 * Extended protocol.
1575 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1578 #define LOCKING_ANDX_SHARED_LOCK 0x1
1579 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1580 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1581 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1582 #define LOCKING_ANDX_LARGE_FILES 0x10
1585 * Bits we test with.
1586 * Note these must fit into 16-bits.
1589 #define NO_OPLOCK 0x0
1590 #define EXCLUSIVE_OPLOCK 0x1
1591 #define BATCH_OPLOCK 0x2
1592 #define LEVEL_II_OPLOCK 0x4
1594 /* The following are Samba-private. */
1595 #define INTERNAL_OPEN_ONLY 0x8
1596 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1597 * inform potential level2 holders on
1599 #define DEFERRED_OPEN_ENTRY 0x20
1600 #define UNUSED_SHARE_MODE_ENTRY 0x40
1601 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1603 /* None of the following should ever appear in fsp->oplock_request. */
1604 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1606 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1607 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1608 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1610 struct inform_level2_message {
1614 unsigned long target_file_id;
1615 unsigned long source_file_id;
1618 /* kernel_oplock_message definition.
1620 struct kernel_oplock_message {
1623 unsigned long file_id;
1627 0 SMB_DEV_T dev 8 bytes.
1628 8 SMB_INO_T inode 8 bytes
1629 16 unsigned long file_id 4 bytes
1633 #define MSG_SMB_KERNEL_BREAK_SIZE 20
1635 /* file_renamed_message definition.
1637 struct file_renamed_message {
1640 char names[1]; A variable area containing sharepath and filename.
1644 0 SMB_DEV_T dev 8 bytes.
1645 8 SMB_INO_T inode 8 bytes
1646 16 char [] name zero terminated namelen bytes
1647 minimum length == 18.
1651 #define MSG_FILE_RENAMED_MIN_SIZE 16
1654 * On the wire return values for oplock types.
1657 #define CORE_OPLOCK_GRANTED (1<<5)
1658 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1660 #define NO_OPLOCK_RETURN 0
1661 #define EXCLUSIVE_OPLOCK_RETURN 1
1662 #define BATCH_OPLOCK_RETURN 2
1663 #define LEVEL_II_OPLOCK_RETURN 3
1666 #define OPLOCKLEVEL_NONE 0
1667 #define OPLOCKLEVEL_II 1
1670 * Capabilities abstracted for different systems.
1673 enum smbd_capability {
1674 KERNEL_OPLOCK_CAPABILITY,
1675 DMAPI_ACCESS_CAPABILITY,
1679 /* if a kernel does support oplocks then a structure of the following
1680 typee is used to describe how to interact with the kernel */
1681 struct kernel_oplocks {
1682 files_struct * (*receive_message)(fd_set *fds);
1683 bool (*set_oplock)(files_struct *fsp, int oplock_type);
1684 void (*release_oplock)(files_struct *fsp);
1685 bool (*msg_waiting)(fd_set *fds);
1686 int notification_fd;
1689 #include "smb_macros.h"
1691 #define MAX_NETBIOSNAME_LEN 16
1692 /* DOS character, NetBIOS namestring. Type used on the wire. */
1693 typedef char nstring[MAX_NETBIOSNAME_LEN];
1694 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1695 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1697 /* A netbios name structure. */
1701 unsigned int name_type;
1704 /* A netbios node status array element. */
1705 typedef struct node_status_ {
1708 unsigned char flags;
1709 } NODE_STATUS_STRUCT;
1711 /* The extra info from a NetBIOS node status query */
1712 struct node_status_extra {
1713 unsigned char mac_addr[6];
1714 /* There really is more here ... */
1724 /* For split krb5 SPNEGO blobs. */
1725 struct pending_auth_data {
1726 struct pending_auth_data *prev, *next;
1727 uint16 vuid; /* Tag for this entry. */
1728 uint16 smbpid; /* Alternate tag for this entry. */
1730 DATA_BLOB partial_data;
1733 typedef struct user_struct {
1734 struct user_struct *next, *prev;
1735 uint16 vuid; /* Tag for this entry. */
1737 char *session_keystr; /* used by utmp and pam session code.
1741 struct auth_serversupplied_info *server_info;
1743 struct auth_ntlmssp_state *auth_ntlmssp_state;
1746 struct unix_error_map {
1754 * Size of new password account encoding string. This is enough space to
1755 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1756 * Do not change unless you are adding new ACB bits!
1759 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1762 Do you want session setups at user level security with a invalid
1763 password to be rejected or allowed in as guest? WinNT rejects them
1764 but it can be a pain as it means "net view" needs to use a password
1766 You have 3 choices in the setting of map_to_guest:
1768 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1769 are rejected. This is the default.
1771 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1772 are rejected, unless the username does not exist, in which case it
1773 is treated as a guest login
1775 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1776 are treated as a guest login
1778 Note that map_to_guest only has an effect in user or server
1782 #define NEVER_MAP_TO_GUEST 0
1783 #define MAP_TO_GUEST_ON_BAD_USER 1
1784 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1785 #define MAP_TO_GUEST_ON_BAD_UID 3
1787 #define SAFE_NETBIOS_CHARS ". -_"
1789 /* generic iconv conversion structure */
1790 typedef struct _smb_iconv_t {
1791 size_t (*direct)(void *cd, const char **inbuf, size_t *inbytesleft,
1792 char **outbuf, size_t *outbytesleft);
1793 size_t (*pull)(void *cd, const char **inbuf, size_t *inbytesleft,
1794 char **outbuf, size_t *outbytesleft);
1795 size_t (*push)(void *cd, const char **inbuf, size_t *inbytesleft,
1796 char **outbuf, size_t *outbytesleft);
1797 void *cd_direct, *cd_pull, *cd_push;
1798 char *from_name, *to_name;
1801 /* The maximum length of a trust account password.
1802 Used when we randomly create it, 15 char passwords
1803 exceed NT4's max password length */
1805 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1807 #include "popt_common.h"
1811 #define LDAP_PORT 389
1813 #define LDAP_GC_PORT 3268
1815 /* used by the IP comparison function */
1817 struct sockaddr_storage ss;
1821 /* Special name type used to cause a _kerberos DNS lookup. */
1822 #define KDC_NAME_TYPE 0xDCDC
1824 /* Used by the SMB signing functions. */
1826 typedef struct smb_sign_info {
1827 void (*sign_outgoing_message)(char *outbuf, struct smb_sign_info *si);
1828 bool (*check_incoming_message)(const char *inbuf, struct smb_sign_info *si, bool must_be_ok);
1829 void (*free_signing_context)(struct smb_sign_info *si);
1830 void *signing_context;
1832 bool negotiated_smb_signing;
1833 bool allow_smb_signing;
1835 bool mandatory_signing;
1836 bool seen_valid; /* Have I ever seen a validly signed packet? */
1846 struct ea_list *next, *prev;
1847 struct ea_struct ea;
1850 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1851 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1852 /* EA to use for DOS attributes */
1853 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1854 /* Prefix for DosStreams in the vfs_streams_xattr module */
1855 #define SAMBA_XATTR_DOSSTREAM_PREFIX "user.DosStream."
1857 #define UUID_SIZE 16
1859 #define UUID_FLAT_SIZE 16
1860 typedef struct uuid_flat {
1861 uint8 info[UUID_FLAT_SIZE];
1864 /* map readonly options */
1865 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};
1867 /* usershare error codes. */
1868 enum usershare_err {
1870 USERSHARE_MALFORMED_FILE,
1871 USERSHARE_BAD_VERSION,
1872 USERSHARE_MALFORMED_PATH,
1873 USERSHARE_MALFORMED_COMMENT_DEF,
1874 USERSHARE_MALFORMED_ACL_DEF,
1876 USERSHARE_PATH_NOT_ABSOLUTE,
1877 USERSHARE_PATH_IS_DENIED,
1878 USERSHARE_PATH_NOT_ALLOWED,
1879 USERSHARE_PATH_NOT_DIRECTORY,
1883 /* Different reasons for closing a file. */
1884 enum file_close_type {NORMAL_CLOSE=0,SHUTDOWN_CLOSE,ERROR_CLOSE};
1886 /* Used in SMB_FS_OBJECTID_INFORMATION requests. Must be exactly 48 bytes. */
1887 #define SAMBA_EXTENDED_INFO_MAGIC 0x536d4261 /* "SmBa" */
1888 #define SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH 28
1889 struct smb_extended_info {
1890 uint32 samba_magic; /* Always SAMBA_EXTRA_INFO_MAGIC */
1891 uint32 samba_version; /* Major/Minor/Release/Revision */
1892 uint32 samba_subversion; /* Prerelease/RC/Vendor patch */
1893 NTTIME samba_gitcommitdate;
1894 char samba_version_string[SAMBA_EXTENDED_INFO_VERSION_STRING_LENGTH];
1900 #define CFF_DOS_PATH 0x00000001