2 # Bootstrap Samba and run a number of tests against it.
3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
4 # Published under the GNU GPL, v3 or later.
10 use FindBin qw($RealBin);
13 use File::Path 'remove_tree';
18 my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
19 open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
28 # If we were not built with ADS support, pretend we were never even available
29 print "smbd does not have ADS support\n" unless $found_ads;
33 # return smb.conf parameters applicable to @path, based on the underlying
35 sub get_fs_specific_conf($$)
37 my ($self, $path) = @_;
39 my $stat_out = `stat --file-system $path` or return "";
41 if ($stat_out =~ m/Type:\s+btrfs/) {
42 $mods .= "streams_xattr btrfs";
46 return "vfs objects = $mods";
53 my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
54 my $self = { vars => {},
57 server_maxtime => $server_maxtime
65 my ($self, $envvars) = @_;
68 # This should cause smbd to terminate gracefully
69 close($envvars->{STDIN_PIPE});
71 my $smbdpid = $envvars->{SMBD_TL_PID};
72 my $nmbdpid = $envvars->{NMBD_TL_PID};
73 my $winbinddpid = $envvars->{WINBINDD_TL_PID};
75 # This should give it time to write out the gcov data
77 my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
78 my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
79 my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
82 && $winbinddchild == -1) {
89 if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
93 $self->stop_sig_term($smbdpid);
94 $self->stop_sig_term($nmbdpid);
95 $self->stop_sig_term($winbinddpid);
99 my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
100 my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
101 my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
104 && $winbinddchild == -1) {
111 if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
115 warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
116 $self->stop_sig_kill($smbdpid);
117 $self->stop_sig_kill($nmbdpid);
118 $self->stop_sig_kill($winbinddpid);
123 sub getlog_env_app($$$)
125 my ($self, $envvars, $name) = @_;
127 my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
130 open(LOG, "<".$envvars->{$name."_TEST_LOG"});
132 seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
136 $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
139 return "" if $out eq $title;
146 my ($self, $envvars) = @_;
149 $ret .= $self->getlog_env_app($envvars, "SMBD");
150 $ret .= $self->getlog_env_app($envvars, "NMBD");
151 $ret .= $self->getlog_env_app($envvars, "WINBINDD");
158 my ($self, $envvars) = @_;
160 my $childpid = waitpid(-1, WNOHANG);
166 # Declare the environments Samba3 makes available.
167 # To be set up, they will be called as
168 # samba3->setup_$envname($self, $path, $dep_1_vars, $dep_2_vars, ...)
169 %Samba3::ENV_DEPS = (
170 # name => [dep_1, dep_2, ...],
172 nt4_dc_schannel => [],
179 nt4_member => ["nt4_dc"],
181 ad_member => ["ad_dc"],
182 ad_member_rfc2307 => ["ad_dc_ntvfs"],
183 ad_member_idmap_rid => ["ad_dc"],
184 ad_member_idmap_ad => ["ad_dc"],
189 my ($self, $path) = @_;
191 print "PROVISIONING NT4 DC...";
193 my $nt4_dc_options = "
198 raw NTLMv2 auth = yes
199 server schannel = auto
201 rpc_server:epmapper = external
202 rpc_server:spoolss = external
203 rpc_server:lsarpc = external
204 rpc_server:samr = external
205 rpc_server:netlogon = external
206 rpc_server:register_embedded_np = yes
207 rpc_server:FssagentRpc = external
209 rpc_daemon:epmd = fork
210 rpc_daemon:spoolssd = fork
211 rpc_daemon:lsasd = fork
212 rpc_daemon:fssd = fork
213 fss: sequence timeout = 1
214 check parent directory delete on close = yes
217 my $vars = $self->provision($path, "SAMBA-TEST",
222 $vars or return undef;
224 if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
228 $vars->{DOMSID} = $vars->{SAMSID};
229 $vars->{DC_SERVER} = $vars->{SERVER};
230 $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
231 $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
232 $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
233 $vars->{DC_USERNAME} = $vars->{USERNAME};
234 $vars->{DC_PASSWORD} = $vars->{PASSWORD};
239 sub setup_nt4_dc_schannel
241 my ($self, $path) = @_;
243 print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
250 rpc_server:epmapper = external
251 rpc_server:spoolss = external
252 rpc_server:lsarpc = external
253 rpc_server:samr = external
254 rpc_server:netlogon = external
255 rpc_server:register_embedded_np = yes
257 rpc_daemon:epmd = fork
258 rpc_daemon:spoolssd = fork
259 rpc_daemon:lsasd = fork
261 server schannel = yes
262 # used to reproduce bug #12772
263 server max protocol = SMB2_02
266 my $vars = $self->provision($path, "NT4SCHANNEL",
271 $vars or return undef;
273 if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
277 $vars->{DOMSID} = $vars->{SAMSID};
278 $vars->{DC_SERVER} = $vars->{SERVER};
279 $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
280 $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
281 $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
282 $vars->{DC_USERNAME} = $vars->{USERNAME};
283 $vars->{DC_PASSWORD} = $vars->{PASSWORD};
290 my ($self, $prefix, $nt4_dc_vars) = @_;
294 print "PROVISIONING MEMBER...";
296 my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
297 $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
299 my $member_options = "
301 dbwrap_tdb_mutexes:* = yes
304 my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
306 "localnt4member3pass",
309 $ret or return undef;
311 my $nmblookup = Samba::bindir_path($self, "nmblookup");
313 print "Waiting for the LOGON SERVER registration ...\n";
314 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
319 } while ($rc != 0 && $count < 10);
321 print "NMBD not reachable after 10 retries\n";
322 teardown_env($self, $ret);
326 my $net = Samba::bindir_path($self, "net");
328 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
329 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
330 $cmd .= "$net rpc join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
331 $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
333 if (system($cmd) != 0) {
334 warn("Join failed\n$cmd");
339 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
340 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
341 $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
343 if (system($cmd) != 0) {
344 warn("check failed\n$cmd");
348 if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
352 $ret->{DOMSID} = $nt4_dc_vars->{DOMSID};
353 $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
354 $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
355 $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
356 $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
357 $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
358 $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
365 my ($self, $prefix, $dcvars) = @_;
367 my $prefix_abs = abs_path($prefix);
370 # If we didn't build with ADS, pretend this env was never available
371 if (not $self->have_ads()) {
375 print "PROVISIONING S3 AD MEMBER...";
377 mkdir($prefix_abs, 0777);
379 my $share_dir="$prefix_abs/share";
380 push(@dirs, $share_dir);
382 my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
383 push(@dirs, $substitution_path);
385 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
386 push(@dirs, $substitution_path);
388 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
389 push(@dirs, $substitution_path);
391 # Using '/' as the winbind separator is a bad idea ...
392 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
393 push(@dirs, $substitution_path);
395 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
396 push(@dirs, $substitution_path);
398 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
399 push(@dirs, $substitution_path);
401 $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
402 push(@dirs, $substitution_path);
404 my $member_options = "
406 workgroup = $dcvars->{DOMAIN}
407 realm = $dcvars->{REALM}
408 netbios aliases = foo bar
409 template homedir = /home/%D/%G/%U
412 path = $share_dir/D_%D/U_%U/G_%G
416 path = $share_dir/D_%D/u_%u/g_%g
421 my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
425 $dcvars->{SERVER_IP},
426 $dcvars->{SERVER_IPV6});
428 $ret or return undef;
430 mkdir($_, 0777) foreach(@dirs);
433 $ret->{DOMAIN} = $dcvars->{DOMAIN};
434 $ret->{REALM} = $dcvars->{REALM};
435 $ret->{DOMSID} = $dcvars->{DOMSID};
439 $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
440 $ctx->{domain} = $dcvars->{DOMAIN};
441 $ctx->{realm} = $dcvars->{REALM};
442 $ctx->{dnsname} = lc($dcvars->{REALM});
443 $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
444 $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
445 $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
446 Samba::mk_krb5_conf($ctx, "");
448 $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
450 my $net = Samba::bindir_path($self, "net");
452 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
453 if (defined($ret->{RESOLV_WRAPPER_CONF})) {
454 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
456 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
458 $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
459 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
460 $cmd .= "$net join $ret->{CONFIGURATION}";
461 $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
463 if (system($cmd) != 0) {
464 warn("Join failed\n$cmd");
468 # We need world access to this share, as otherwise the domain
469 # administrator from the AD domain provided by Samba4 can't
470 # access the share for tests.
471 chmod 0777, "$prefix/share";
473 if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
477 $ret->{DC_SERVER} = $dcvars->{SERVER};
478 $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
479 $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
480 $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
481 $ret->{DC_USERNAME} = $dcvars->{USERNAME};
482 $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
487 sub setup_ad_member_rfc2307
489 my ($self, $prefix, $dcvars) = @_;
491 # If we didn't build with ADS, pretend this env was never available
492 if (not $self->have_ads()) {
496 print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
498 my $member_options = "
500 workgroup = $dcvars->{DOMAIN}
501 realm = $dcvars->{REALM}
503 idmap negative cache time = 0
504 idmap config * : backend = autorid
505 idmap config * : range = 1000000-1999999
506 idmap config * : rangesize = 100000
507 idmap config $dcvars->{DOMAIN} : backend = rfc2307
508 idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
509 idmap config $dcvars->{DOMAIN} : ldap_server = ad
510 idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
511 idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
513 password server = $dcvars->{SERVER}
516 my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
520 $dcvars->{SERVER_IP},
521 $dcvars->{SERVER_IPV6});
523 $ret or return undef;
526 $ret->{DOMAIN} = $dcvars->{DOMAIN};
527 $ret->{REALM} = $dcvars->{REALM};
528 $ret->{DOMSID} = $dcvars->{DOMSID};
531 my $prefix_abs = abs_path($prefix);
533 $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
534 $ctx->{domain} = $dcvars->{DOMAIN};
535 $ctx->{realm} = $dcvars->{REALM};
536 $ctx->{dnsname} = lc($dcvars->{REALM});
537 $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
538 $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
539 $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
540 Samba::mk_krb5_conf($ctx, "");
542 $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
544 my $net = Samba::bindir_path($self, "net");
546 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
547 if (defined($ret->{RESOLV_WRAPPER_CONF})) {
548 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
550 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
552 $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
553 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
554 $cmd .= "$net join $ret->{CONFIGURATION}";
555 $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
557 if (system($cmd) != 0) {
558 warn("Join failed\n$cmd");
562 # We need world access to this share, as otherwise the domain
563 # administrator from the AD domain provided by Samba4 can't
564 # access the share for tests.
565 chmod 0777, "$prefix/share";
567 if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
571 $ret->{DC_SERVER} = $dcvars->{SERVER};
572 $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
573 $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
574 $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
575 $ret->{DC_USERNAME} = $dcvars->{USERNAME};
576 $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
581 sub setup_ad_member_idmap_rid
583 my ($self, $prefix, $dcvars) = @_;
585 # If we didn't build with ADS, pretend this env was never available
586 if (not $self->have_ads()) {
590 print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
592 my $member_options = "
594 workgroup = $dcvars->{DOMAIN}
595 realm = $dcvars->{REALM}
596 idmap config * : backend = tdb
597 idmap config * : range = 1000000-1999999
598 idmap config $dcvars->{DOMAIN} : backend = rid
599 idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
602 my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
606 $dcvars->{SERVER_IP},
607 $dcvars->{SERVER_IPV6});
609 $ret or return undef;
612 $ret->{DOMAIN} = $dcvars->{DOMAIN};
613 $ret->{REALM} = $dcvars->{REALM};
614 $ret->{DOMSID} = $dcvars->{DOMSID};
617 my $prefix_abs = abs_path($prefix);
619 $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
620 $ctx->{domain} = $dcvars->{DOMAIN};
621 $ctx->{realm} = $dcvars->{REALM};
622 $ctx->{dnsname} = lc($dcvars->{REALM});
623 $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
624 $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
625 $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
626 Samba::mk_krb5_conf($ctx, "");
628 $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
630 my $net = Samba::bindir_path($self, "net");
632 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
633 if (defined($ret->{RESOLV_WRAPPER_CONF})) {
634 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
636 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
638 $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
639 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
640 $cmd .= "$net join $ret->{CONFIGURATION}";
641 $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
643 if (system($cmd) != 0) {
644 warn("Join failed\n$cmd");
648 # We need world access to this share, as otherwise the domain
649 # administrator from the AD domain provided by Samba4 can't
650 # access the share for tests.
651 chmod 0777, "$prefix/share";
653 if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
657 $ret->{DC_SERVER} = $dcvars->{SERVER};
658 $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
659 $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
660 $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
661 $ret->{DC_USERNAME} = $dcvars->{USERNAME};
662 $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
667 sub setup_ad_member_idmap_ad
669 my ($self, $prefix, $dcvars) = @_;
671 # If we didn't build with ADS, pretend this env was never available
672 if (not $self->have_ads()) {
676 print "PROVISIONING S3 AD MEMBER WITH idmap_ad config...";
678 my $member_options = "
680 workgroup = $dcvars->{DOMAIN}
681 realm = $dcvars->{REALM}
682 password server = $dcvars->{SERVER}
683 idmap config * : backend = tdb
684 idmap config * : range = 1000000-1999999
685 idmap config $dcvars->{DOMAIN} : backend = ad
686 idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
689 my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
693 $dcvars->{SERVER_IP},
694 $dcvars->{SERVER_IPV6});
696 $ret or return undef;
699 $ret->{DOMAIN} = $dcvars->{DOMAIN};
700 $ret->{REALM} = $dcvars->{REALM};
701 $ret->{DOMSID} = $dcvars->{DOMSID};
704 my $prefix_abs = abs_path($prefix);
706 $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
707 $ctx->{domain} = $dcvars->{DOMAIN};
708 $ctx->{realm} = $dcvars->{REALM};
709 $ctx->{dnsname} = lc($dcvars->{REALM});
710 $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
711 $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
712 $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
713 Samba::mk_krb5_conf($ctx, "");
715 $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
717 my $net = Samba::bindir_path($self, "net");
719 $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
720 if (defined($ret->{RESOLV_WRAPPER_CONF})) {
721 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
723 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
725 $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
726 $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
727 $cmd .= "$net join $ret->{CONFIGURATION}";
728 $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
730 if (system($cmd) != 0) {
731 warn("Join failed\n$cmd");
735 # We need world access to this share, as otherwise the domain
736 # administrator from the AD domain provided by Samba4 can't
737 # access the share for tests.
738 chmod 0777, "$prefix/share";
740 if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
744 $ret->{DC_SERVER} = $dcvars->{SERVER};
745 $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
746 $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
747 $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
748 $ret->{DC_USERNAME} = $dcvars->{USERNAME};
749 $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
754 sub setup_simpleserver
756 my ($self, $path) = @_;
758 print "PROVISIONING simple server...";
760 my $prefix_abs = abs_path($path);
762 my $simpleserver_options = "
765 vfs objects = xattr_tdb streams_depot time_audit full_audit
769 full_audit:syslog = no
770 full_audit:success = none
771 full_audit:failure = none
774 path = $prefix_abs/share
775 vfs objects = aio_fork
777 vfs_aio_fork:erratic_testing_mode=yes
780 path = $prefix_abs/share
782 store dos attributes = yes
783 hide files = /hidefile/
787 path = $prefix_abs/share
789 smb encrypt = desired
792 my $vars = $self->provision($path, "WORKGROUP",
795 $simpleserver_options);
797 $vars or return undef;
799 if (not $self->check_or_start($vars, "yes", "no", "yes")) {
808 my ($self, $path) = @_;
809 my $prefix_abs = abs_path($path);
810 my $srcdir_abs = abs_path($self->{srcdir});
812 print "PROVISIONING file server ...\n";
816 mkdir($prefix_abs, 0777);
818 my $usershare_dir="$prefix_abs/lib/usershare";
820 mkdir("$prefix_abs/lib", 0755);
821 remove_tree($usershare_dir);
822 mkdir($usershare_dir, 01770);
824 my $share_dir="$prefix_abs/share";
826 # Create share directory structure
827 my $lower_case_share_dir="$share_dir/lower-case";
828 push(@dirs, $lower_case_share_dir);
830 my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
831 push(@dirs, $lower_case_share_dir_30000);
833 my $dfree_share_dir="$share_dir/dfree";
834 push(@dirs, $dfree_share_dir);
835 push(@dirs, "$dfree_share_dir/subdir1");
836 push(@dirs, "$dfree_share_dir/subdir2");
837 push(@dirs, "$dfree_share_dir/subdir3");
839 my $valid_users_sharedir="$share_dir/valid_users";
840 push(@dirs,$valid_users_sharedir);
842 my $offline_sharedir="$share_dir/offline";
843 push(@dirs,$offline_sharedir);
845 my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
846 push(@dirs, $force_user_valid_users_dir);
848 my $smbget_sharedir="$share_dir/smbget";
849 push(@dirs,$smbget_sharedir);
851 my $tarmode_sharedir="$share_dir/tarmode";
852 push(@dirs,$tarmode_sharedir);
854 my $usershare_sharedir="$share_dir/usershares";
855 push(@dirs,$usershare_sharedir);
857 my $fileserver_options = "
858 kernel change notify = yes
860 usershare path = $usershare_dir
861 usershare max shares = 10
862 usershare allow guests = yes
863 usershare prefix allow list = $usershare_sharedir
866 path = $lower_case_share_dir
867 comment = smb username is [%U]
868 case sensitive = True
871 short preserve case = no
873 path = $lower_case_share_dir_30000
874 comment = smb username is [%U]
875 case sensitive = True
878 short preserve case = no
880 path = $dfree_share_dir
881 comment = smb username is [%U]
882 dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
884 path = $valid_users_sharedir
885 valid users = +userdup
887 path = $offline_sharedir
888 vfs objects = offline
890 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
891 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
892 [force_user_valid_users]
893 path = $force_user_valid_users_dir
894 comment = force user with valid users combination test share
895 valid users = +force_user
896 force user = force_user
897 force group = everyone
898 write list = force_user
901 path = $smbget_sharedir
902 comment = smb username is [%U]
906 comment = ignore system acls
907 acl_xattr:ignore system acls = yes
910 comment = inherit owner
914 comment = inherit only unix owner
915 inherit owner = unix only
916 acl_xattr:ignore system acls = yes
919 my $vars = $self->provision($path, "WORKGROUP",
927 $vars or return undef;
929 if (not $self->check_or_start($vars, "yes", "no", "yes")) {
934 mkdir($_, 0777) foreach(@dirs);
936 ## Create case sensitive lower case share dir
937 foreach my $file ('a'..'z') {
938 my $full_path = $lower_case_share_dir . '/' . $file;
939 open my $fh, '>', $full_path;
940 # Add some content to file
941 print $fh $full_path;
945 for (my $file = 1; $file < 51; ++$file) {
946 my $full_path = $lower_case_share_dir . '/' . $file;
947 open my $fh, '>', $full_path;
948 # Add some content to file
949 print $fh $full_path;
953 # Create content for 30000 share
954 foreach my $file ('a'..'z') {
955 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
956 open my $fh, '>', $full_path;
957 # Add some content to file
958 print $fh $full_path;
962 for (my $file = 1; $file < 30001; ++$file) {
963 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
964 open my $fh, '>', $full_path;
965 # Add some content to file
966 print $fh $full_path;
971 ## create a listable file in valid_users_share
973 my $valid_users_target = "$valid_users_sharedir/foo";
974 unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
975 warn("Unable to open $valid_users_target");
978 close(VALID_USERS_TARGET);
979 chmod 0644, $valid_users_target;
986 my ($self, $prefix) = @_;
988 # If we didn't build with ADS, pretend this env was never available
989 if (not $self->have_ads()) {
993 print "PROVISIONING server with security=ads...";
995 my $ktest_options = "
997 realm = ktest.samba.example.com
999 username map = $prefix/lib/username.map
1000 server signing = required
1001 server min protocol = SMB3_00
1002 client max protocol = SMB3
1004 # This disables NTLM auth against the local SAM, which
1005 # we use can then test this setting by.
1006 ntlm auth = disabled
1009 my $ret = $self->provision($prefix, "KTEST",
1014 $ret or return undef;
1017 my $prefix_abs = abs_path($prefix);
1019 $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
1020 $ctx->{domain} = "KTEST";
1021 $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
1022 $ctx->{dnsname} = lc($ctx->{realm});
1023 $ctx->{kdc_ipv4} = "0.0.0.0";
1024 $ctx->{kdc_ipv6} = "::";
1025 $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
1026 Samba::mk_krb5_conf($ctx, "");
1028 $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
1030 open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
1032 $ret->{USERNAME} = KTEST\\Administrator
1036 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
1037 #Samba4 DC with the same parameters as are being used here. The
1038 #domain SID is S-1-5-21-1071277805-689288055-3486227160
1039 $ret->{SAMSID} = "S-1-5-21-1911091480-1468226576-2729736297";
1040 $ret->{DOMSID} = "S-1-5-21-1071277805-689288055-3486227160";
1042 system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
1043 chmod 0600, "$prefix/private/secrets.tdb";
1045 #Make sure there's no old ntdb file.
1046 system("rm -f $prefix/private/secrets.ntdb");
1048 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
1049 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
1051 #and having in krb5.conf:
1052 # ticket_lifetime = 799718400
1053 # renew_lifetime = 799718400
1055 # The commands for the -2 keytab where were:
1056 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
1057 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
1058 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
1059 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1060 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1062 # and then for the -3 keytab, I did
1064 # net changetrustpw; kdestroy and the same again.
1066 # This creates a credential cache with a very long lifetime (2036 at
1067 # at 2011-04), and shows that running 'net changetrustpw' does not
1068 # break existing logins (for the secrets.tdb method at least).
1071 $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1073 system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1074 chmod 0600, "$prefix/krb5_ccache-2";
1076 system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1077 chmod 0600, "$prefix/krb5_ccache-3";
1079 # We need world access to this share, as otherwise the domain
1080 # administrator from the AD domain provided by ktest can't
1081 # access the share for tests.
1082 chmod 0777, "$prefix/share";
1084 if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1090 sub setup_maptoguest
1092 my ($self, $path) = @_;
1094 print "PROVISIONING maptoguest...";
1097 map to guest = bad user
1101 my $vars = $self->provision($path, "WORKGROUP",
1106 $vars or return undef;
1108 if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1115 sub stop_sig_term($$) {
1116 my ($self, $pid) = @_;
1117 kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1120 sub stop_sig_kill($$) {
1121 my ($self, $pid) = @_;
1122 kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1127 my ($env_vars, $app, $pid) = @_;
1129 open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1136 my ($env_vars, $app) = @_;
1138 open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1144 sub check_or_start($$$$$) {
1145 my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1147 # use a pipe for stdin in the child processes. This allows
1148 # those processes to monitor the pipe for EOF to ensure they
1149 # exit when the test script exits
1150 pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1152 unlink($env_vars->{NMBD_TEST_LOG});
1153 print "STARTING NMBD...";
1156 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1157 open STDERR, '>&STDOUT';
1159 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1161 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1162 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1163 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1164 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1166 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1167 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1168 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1169 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1170 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1171 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1172 $ENV{UID_WRAPPER_ROOT} = "1";
1174 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1176 if ($nmbd ne "yes") {
1177 $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1178 my $signame = shift;
1179 print("Skip nmbd received signal $signame");
1182 sleep($self->{server_maxtime});
1186 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1187 my @optargs = ("-d0");
1188 if (defined($ENV{NMBD_OPTIONS})) {
1189 @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1191 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1192 if(defined($ENV{NMBD_VALGRIND})) {
1193 @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1195 my @args = ("-F", "--no-process-group",
1196 "-s", $env_vars->{SERVERCONFFILE},
1197 "-l", $env_vars->{LOGDIR});
1198 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1199 push(@args, "--log-stdout");
1202 close($env_vars->{STDIN_PIPE});
1203 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1205 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1206 or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1208 $env_vars->{NMBD_TL_PID} = $pid;
1209 write_pid($env_vars, "nmbd", $pid);
1212 unlink($env_vars->{WINBINDD_TEST_LOG});
1213 print "STARTING WINBINDD...";
1216 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1217 open STDERR, '>&STDOUT';
1219 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1221 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1222 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1223 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1224 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1226 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1227 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1228 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1229 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1230 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1231 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1232 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1233 $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1235 $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1237 $ENV{UID_WRAPPER_ROOT} = "1";
1239 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1241 if ($winbindd ne "yes") {
1242 $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1243 my $signame = shift;
1244 print("Skip winbindd received signal $signame");
1247 sleep($self->{server_maxtime});
1251 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1252 my @optargs = ("-d0");
1253 if (defined($ENV{WINBINDD_OPTIONS})) {
1254 @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1256 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1257 if(defined($ENV{WINBINDD_VALGRIND})) {
1258 @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1260 my @args = ("-F", "--no-process-group",
1261 "-s", $env_vars->{SERVERCONFFILE},
1262 "-l", $env_vars->{LOGDIR});
1263 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1264 push(@args, "--stdout");
1267 close($env_vars->{STDIN_PIPE});
1268 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1270 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1271 or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1273 $env_vars->{WINBINDD_TL_PID} = $pid;
1274 write_pid($env_vars, "winbindd", $pid);
1277 unlink($env_vars->{SMBD_TEST_LOG});
1278 print "STARTING SMBD...";
1281 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1282 open STDERR, '>&STDOUT';
1284 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1286 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1287 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1288 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1289 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1291 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1292 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1293 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1294 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1295 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1296 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1297 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1298 $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1300 $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1302 $ENV{UID_WRAPPER_ROOT} = "1";
1304 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1306 if ($smbd ne "yes") {
1307 $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1308 my $signame = shift;
1309 print("Skip smbd received signal $signame");
1312 sleep($self->{server_maxtime});
1316 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1317 my @optargs = ("-d0");
1318 if (defined($ENV{SMBD_OPTIONS})) {
1319 @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1321 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1322 if(defined($ENV{SMBD_VALGRIND})) {
1323 @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1325 my @args = ("-F", "--no-process-group",
1326 "-s", $env_vars->{SERVERCONFFILE},
1327 "-l", $env_vars->{LOGDIR});
1328 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1329 push(@args, "--log-stdout");
1332 close($env_vars->{STDIN_PIPE});
1333 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1335 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1336 or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1338 $env_vars->{SMBD_TL_PID} = $pid;
1339 write_pid($env_vars, "smbd", $pid);
1342 close(STDIN_READER);
1344 return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1347 sub createuser($$$$$)
1349 my ($self, $username, $password, $conffile, $env) = @_;
1350 my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1353 while(my($var, $val) = each %$env) {
1354 $cmd = "$var=\"$val\" $cmd";
1357 unless (open(PWD, "|$cmd")) {
1358 warn("Unable to set password for $username account\n$cmd");
1361 print PWD "$password\n$password\n";
1362 unless (close(PWD)) {
1363 warn("Unable to set password for $username account\n$cmd");
1368 sub provision($$$$$$$$$)
1370 my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1373 ## setup the various environment variables we need
1376 my $samsid = Samba::random_domain_sid();
1377 my $swiface = Samba::get_interface($server);
1379 my %createuser_env = ();
1380 my $server_ip = "127.0.0.$swiface";
1381 my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1383 my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1386 my $unix_gids_str = $);
1387 my @unix_gids = split(" ", $unix_gids_str);
1389 my $prefix_abs = abs_path($prefix);
1390 my $bindir_abs = abs_path($self->{bindir});
1394 my $shrdir="$prefix_abs/share";
1395 push(@dirs,$shrdir);
1397 my $libdir="$prefix_abs/lib";
1398 push(@dirs,$libdir);
1400 my $piddir="$prefix_abs/pid";
1401 push(@dirs,$piddir);
1403 my $privatedir="$prefix_abs/private";
1404 push(@dirs,$privatedir);
1406 my $binddnsdir = "$prefix_abs/bind-dns";
1407 push(@dirs, $binddnsdir);
1409 my $lockdir="$prefix_abs/lockdir";
1410 push(@dirs,$lockdir);
1412 my $eventlogdir="$prefix_abs/lockdir/eventlog";
1413 push(@dirs,$eventlogdir);
1415 my $logdir="$prefix_abs/logs";
1416 push(@dirs,$logdir);
1418 my $driver32dir="$shrdir/W32X86";
1419 push(@dirs,$driver32dir);
1421 my $driver64dir="$shrdir/x64";
1422 push(@dirs,$driver64dir);
1424 my $driver40dir="$shrdir/WIN40";
1425 push(@dirs,$driver40dir);
1427 my $ro_shrdir="$shrdir/root-tmp";
1428 push(@dirs,$ro_shrdir);
1430 my $msdfs_shrdir="$shrdir/msdfsshare";
1431 push(@dirs,$msdfs_shrdir);
1433 my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1434 push(@dirs,$msdfs_deeppath);
1436 my $badnames_shrdir="$shrdir/badnames";
1437 push(@dirs,$badnames_shrdir);
1439 my $lease1_shrdir="$shrdir/SMB2_10";
1440 push(@dirs,$lease1_shrdir);
1442 my $lease2_shrdir="$shrdir/SMB3_00";
1443 push(@dirs,$lease2_shrdir);
1445 my $manglenames_shrdir="$shrdir/manglenames";
1446 push(@dirs,$manglenames_shrdir);
1448 my $widelinks_shrdir="$shrdir/widelinks";
1449 push(@dirs,$widelinks_shrdir);
1451 my $widelinks_linkdir="$shrdir/widelinks_foo";
1452 push(@dirs,$widelinks_linkdir);
1454 my $shadow_tstdir="$shrdir/shadow";
1455 push(@dirs,$shadow_tstdir);
1456 my $shadow_mntdir="$shadow_tstdir/mount";
1457 push(@dirs,$shadow_mntdir);
1458 my $shadow_basedir="$shadow_mntdir/base";
1459 push(@dirs,$shadow_basedir);
1460 my $shadow_shrdir="$shadow_basedir/share";
1461 push(@dirs,$shadow_shrdir);
1463 my $nosymlinks_shrdir="$shrdir/nosymlinks";
1464 push(@dirs,$nosymlinks_shrdir);
1466 my $local_symlinks_shrdir="$shrdir/local_symlinks";
1467 push(@dirs,$local_symlinks_shrdir);
1469 # this gets autocreated by winbindd
1470 my $wbsockdir="$prefix_abs/winbindd";
1472 my $nmbdsockdir="$prefix_abs/nmbd";
1473 unlink($nmbdsockdir);
1476 ## create the test directory layout
1478 die ("prefix_abs = ''") if $prefix_abs eq "";
1479 die ("prefix_abs = '/'") if $prefix_abs eq "/";
1481 mkdir($prefix_abs, 0777);
1482 print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1483 if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1484 system("rm -rf $prefix_abs/*");
1486 mkdir($_, 0777) foreach(@dirs);
1488 my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1491 ## lockdir and piddir must be 0755
1493 chmod 0755, $lockdir;
1494 chmod 0755, $piddir;
1498 ## create ro and msdfs share layout
1501 chmod 0755, $ro_shrdir;
1502 my $unreadable_file = "$ro_shrdir/unreadable_file";
1503 unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1504 warn("Unable to open $unreadable_file");
1507 close(UNREADABLE_FILE);
1508 chmod 0600, $unreadable_file;
1510 my $msdfs_target = "$ro_shrdir/msdfs-target";
1511 unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1512 warn("Unable to open $msdfs_target");
1515 close(MSDFS_TARGET);
1516 chmod 0666, $msdfs_target;
1517 symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1518 "$msdfs_shrdir/msdfs-src1";
1519 symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1522 ## create bad names in $badnames_shrdir
1524 ## (An invalid name, would be mangled to 8.3).
1525 my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1526 unless (open(BADNAME_TARGET, ">$badname_target")) {
1527 warn("Unable to open $badname_target");
1530 close(BADNAME_TARGET);
1531 chmod 0666, $badname_target;
1533 ## (A bad name, would not be mangled to 8.3).
1534 my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1535 unless (open(BADNAME_TARGET, ">$badname_target")) {
1536 warn("Unable to open $badname_target");
1539 close(BADNAME_TARGET);
1540 chmod 0666, $badname_target;
1542 ## (A bad good name).
1543 my $badname_target = "$badnames_shrdir/blank.txt";
1544 unless (open(BADNAME_TARGET, ">$badname_target")) {
1545 warn("Unable to open $badname_target");
1548 close(BADNAME_TARGET);
1549 chmod 0666, $badname_target;
1552 ## create mangleable directory names in $manglenames_shrdir
1554 my $manglename_target = "$manglenames_shrdir/foo:bar";
1555 mkdir($manglename_target, 0777);
1558 ## create symlinks for widelinks tests.
1560 my $widelinks_target = "$widelinks_linkdir/target";
1561 unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1562 warn("Unable to open $widelinks_target");
1565 close(WIDELINKS_TARGET);
1566 chmod 0666, $widelinks_target;
1568 ## This link should get ACCESS_DENIED
1570 symlink "$widelinks_target", "$widelinks_shrdir/source";
1572 ## This link should be allowed
1574 symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1576 my $conffile="$libdir/server.conf";
1577 my $dfqconffile="$libdir/dfq.conf";
1579 my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/third_party/nss_wrapper/nss_wrapper.pl";
1580 my $nss_wrapper_passwd = "$privatedir/passwd";
1581 my $nss_wrapper_group = "$privatedir/group";
1582 my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1583 my $resolv_conf = "$privatedir/resolv.conf";
1584 my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1586 my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1588 my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1590 my @eventlog_list = ("dns server", "application");
1593 ## calculate uids and gids
1596 my ($max_uid, $max_gid);
1597 my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1598 my ($uid_pdbtest_wkn);
1600 my ($uid_force_user);
1601 my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1602 my ($gid_userdup, $gid_everyone);
1603 my ($gid_force_user);
1607 if ($unix_uid < 0xffff - 10) {
1610 $max_uid = $unix_uid;
1613 $uid_root = $max_uid - 1;
1614 $uid_nobody = $max_uid - 2;
1615 $uid_pdbtest = $max_uid - 3;
1616 $uid_pdbtest2 = $max_uid - 4;
1617 $uid_userdup = $max_uid - 5;
1618 $uid_pdbtest_wkn = $max_uid - 6;
1619 $uid_force_user = $max_uid - 7;
1620 $uid_smbget = $max_uid - 8;
1621 $uid_user1 = $max_uid - 9;
1622 $uid_user2 = $max_uid - 10;
1624 if ($unix_gids[0] < 0xffff - 8) {
1627 $max_gid = $unix_gids[0];
1630 $gid_nobody = $max_gid - 1;
1631 $gid_nogroup = $max_gid - 2;
1632 $gid_root = $max_gid - 3;
1633 $gid_domusers = $max_gid - 4;
1634 $gid_domadmins = $max_gid - 5;
1635 $gid_userdup = $max_gid - 6;
1636 $gid_everyone = $max_gid - 7;
1637 $gid_force_user = $max_gid - 8;
1643 unless (open(CONF, ">$conffile")) {
1644 warn("Unable to open $conffile");
1649 netbios name = $server
1650 interfaces = $server_ip/8 $server_ipv6/64
1651 bind interfaces only = yes
1652 panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1653 smbd:suicide mode = yes
1657 private dir = $privatedir
1658 binddns dir = $binddnsdir
1659 pid directory = $piddir
1660 lock directory = $lockdir
1661 log file = $logdir/log.\%m
1666 state directory = $lockdir
1667 cache directory = $lockdir
1669 passdb backend = tdbsam
1673 add user script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1674 add group script = $nss_wrapper_pl --group_path $nss_wrapper_group --type group --action add --name %g
1675 add machine script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1676 add user to group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1677 delete user script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1678 delete group script = $nss_wrapper_pl --group_path $nss_wrapper_group --type group --action delete --name %g
1679 delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1681 addprinter command = $mod_printer_pl -a -s $conffile --
1682 deleteprinter command = $mod_printer_pl -d -s $conffile --
1684 eventlog list = application \"dns server\"
1687 kernel change notify = no
1691 printcap name = /dev/null
1693 winbindd socket directory = $wbsockdir
1694 nmbd:socket dir = $nmbdsockdir
1695 idmap config * : range = 100000-200000
1696 winbind enum users = yes
1697 winbind enum groups = yes
1698 winbind separator = /
1699 include system krb5 conf = no
1701 # min receivefile size = 4000
1705 smbd:sharedelay = 100000
1706 smbd:writetimeupdatedelay = 500000
1710 store dos attributes = yes
1715 vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1718 print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1719 lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1720 lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1721 lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1722 lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1723 queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1724 queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1726 print notify backchannel = yes
1728 ncalrpc dir = $prefix_abs/ncalrpc
1730 # The samba3.blackbox.smbclient_s3 test uses this to test that
1731 # sending messages works, and that the %m sub works.
1732 message command = mv %s $shrdir/message.%m
1734 # fsrvp server requires registry shares
1735 registry shares = yes
1737 # Used by RPC SRVSVC tests
1738 add share command = $bindir_abs/smbaddshare
1739 change share command = $bindir_abs/smbchangeshare
1740 delete share command = $bindir_abs/smbdeleteshare
1742 # fruit:copyfile is a global option
1743 fruit:copyfile = yes
1745 #this does not mean that we use non-secure test env,
1746 #it just means we ALLOW one to be configured.
1747 allow insecure wide links = yes
1749 # Begin extra options
1753 #Include user defined custom parameters if set
1756 if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1757 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1763 comment = smb username is [%U]
1766 comment = Load dirsort module
1767 vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1770 comment = encrypt smb username is [%U]
1771 smb encrypt = required
1772 vfs objects = dirsort
1782 force user = $unix_name
1784 [forceuser_unixonly]
1785 comment = force a user with unix user SID and group SID
1787 force user = pdbtest
1789 [forceuser_wkngroup]
1790 comment = force a user with well-known group SID
1792 force user = pdbtest_wkn
1796 force group = nogroup
1804 write list = $unix_name
1807 valid users = $unix_name
1808 access based share enum = yes
1810 path = $msdfs_shrdir
1812 msdfs shuffle referrals = yes
1816 hide unreadable = yes
1819 case sensitive = yes
1822 hide unwriteable files = yes
1825 kernel share modes = no
1839 default devmode = no
1845 comment = smb username is [%U]
1847 nfs4acl_xattr:version = 40
1848 vfs objects = nfs4acl_xattr xattr_tdb
1850 [nfs4acl_special_40]
1852 comment = smb username is [%U]
1854 nfs4acl_xattr:version = 40
1855 vfs objects = nfs4acl_xattr xattr_tdb
1859 comment = smb username is [%U]
1861 vfs objects = nfs4acl_xattr xattr_tdb
1865 comment = smb username is [%U]
1866 vfs objects = nfs4acl_xattr xattr_tdb
1868 nfs4acl_xattr:encoding = xdr
1869 nfs4acl_xattr:version = 40
1873 comment = smb username is [%U]
1874 vfs objects = nfs4acl_xattr xattr_tdb
1876 nfs4acl_xattr:encoding = xdr
1877 nfs4acl_xattr:version = 41
1881 comment = smb username is [%U]
1883 force create mode = 777
1886 comment = smb username is [%U]
1888 force create mode = 0
1889 directory mask = 0777
1890 force directory mode = 0
1891 vfs objects = xattr_tdb streams_depot
1902 vfs objects = catia fruit streams_xattr acl_xattr xattr_tdb
1903 fruit:resource = file
1904 fruit:metadata = netatalk
1905 fruit:locking = netatalk
1906 fruit:encoding = native
1907 fruit:veto_appledouble = no
1911 # This is used by vfs.fruit tests that require real fs xattr
1912 vfs objects = catia fruit streams_xattr acl_xattr
1913 fruit:resource = file
1914 fruit:metadata = netatalk
1915 fruit:locking = netatalk
1916 fruit:encoding = native
1917 fruit:veto_appledouble = no
1919 [vfs_fruit_metadata_stream]
1921 vfs objects = fruit streams_xattr acl_xattr xattr_tdb
1922 fruit:resource = file
1923 fruit:metadata = stream
1924 fruit:veto_appledouble = no
1926 [vfs_fruit_stream_depot]
1928 vfs objects = fruit streams_depot acl_xattr xattr_tdb
1929 fruit:resource = stream
1930 fruit:metadata = stream
1931 fruit:veto_appledouble = no
1935 vfs objects = streams_xattr acl_xattr xattr_tdb
1937 [vfs_wo_fruit_stream_depot]
1939 vfs objects = streams_depot acl_xattr xattr_tdb
1941 [vfs_fruit_timemachine]
1943 vfs objects = fruit streams_xattr acl_xattr xattr_tdb
1944 fruit:resource = file
1945 fruit:metadata = stream
1946 fruit:time machine = yes
1947 fruit:time machine max size = 32K
1950 path = $badnames_shrdir
1954 path = $manglenames_shrdir
1962 path = $widelinks_shrdir
1968 comment = fake shapshots using rsync
1969 vfs objects = shell_snap shadow_copy2
1970 shell_snap:check path command = $fake_snap_pl --check
1971 shell_snap:create command = $fake_snap_pl --create
1972 shell_snap:delete command = $fake_snap_pl --delete
1973 # a relative path here fails, the snapshot dir is no longer found
1974 shadow:snapdir = $shrdir/.snapshots
1977 path = $shadow_shrdir
1978 comment = previous versions snapshots under mount point
1979 vfs objects = shadow_copy2
1980 shadow:mountpoint = $shadow_mntdir
1983 path = $shadow_shrdir
1984 comment = previous versions snapshots outside mount point
1985 vfs objects = shadow_copy2
1986 shadow:mountpoint = $shadow_mntdir
1987 shadow:snapdir = $shadow_tstdir/.snapshots
1990 path = $shadow_shrdir
1991 comment = previous versions with subvolume snapshots, snapshots under base dir
1992 vfs objects = shadow_copy2
1993 shadow:mountpoint = $shadow_mntdir
1994 shadow:basedir = $shadow_basedir
1995 shadow:snapdir = $shadow_basedir/.snapshots
1998 path = $shadow_shrdir
1999 comment = previous versions with subvolume snapshots, snapshots outside mount point
2000 vfs objects = shadow_copy2
2001 shadow:mountpoint = $shadow_mntdir
2002 shadow:basedir = $shadow_basedir
2003 shadow:snapdir = $shadow_tstdir/.snapshots
2006 path = $shadow_shrdir
2007 comment = previous versions at volume root snapshots under mount point
2008 vfs objects = shadow_copy2
2009 shadow:mountpoint = $shadow_shrdir
2012 path = $shadow_shrdir
2013 comment = previous versions at volume root snapshots outside mount point
2014 vfs objects = shadow_copy2
2015 shadow:mountpoint = $shadow_shrdir
2016 shadow:snapdir = $shadow_tstdir/.snapshots
2019 path = $shadow_shrdir
2020 comment = previous versions snapshots everywhere
2021 vfs objects = shadow_copy2
2022 shadow:mountpoint = $shadow_mntdir
2023 shadow:snapdirseverywhere = yes
2026 path = $shadow_shrdir
2027 comment = previous versions using snapsharepath
2028 vfs objects = shadow_copy2
2029 shadow:mountpoint = $shadow_mntdir
2030 shadow:snapdir = $shadow_tstdir/.snapshots
2031 shadow:snapsharepath = share
2034 comment = Testing shadow:format with default option
2035 vfs object = shadow_copy2
2036 path = $shadow_shrdir
2039 shadow:mountpoint = $shadow_mntdir
2040 shadow:basedir = $shadow_basedir
2041 shadow:snapdir = $shadow_basedir/.snapshots
2042 shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2045 comment = Testing shadow:format with only date component
2046 vfs object = shadow_copy2
2047 path = $shadow_shrdir
2050 shadow:mountpoint = $shadow_mntdir
2051 shadow:basedir = $shadow_basedir
2052 shadow:snapdir = $shadow_basedir/.snapshots
2053 shadow:format = \@GMT-%Y-%m-%d
2056 comment = Testing shadow:format with some hardcoded prefix
2057 vfs object = shadow_copy2
2058 path = $shadow_shrdir
2061 shadow:mountpoint = $shadow_mntdir
2062 shadow:basedir = $shadow_basedir
2063 shadow:snapdir = $shadow_basedir/.snapshots
2064 shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
2067 comment = Testing shadow:format with modified format
2068 vfs object = shadow_copy2
2069 path = $shadow_shrdir
2072 shadow:mountpoint = $shadow_mntdir
2073 shadow:basedir = $shadow_basedir
2074 shadow:snapdir = $shadow_basedir/.snapshots
2075 shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
2078 comment = Testing shadow:snapprefix regex
2079 vfs object = shadow_copy2
2080 path = $shadow_shrdir
2083 shadow:mountpoint = $shadow_mntdir
2084 shadow:basedir = $shadow_basedir
2085 shadow:snapdir = $shadow_basedir/.snapshots
2086 shadow:snapprefix = \^s[a-z]*p\$
2087 shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
2090 comment = Testing shadow:snapprefix with delim regex
2091 vfs object = shadow_copy2
2092 path = $shadow_shrdir
2095 shadow:mountpoint = $shadow_mntdir
2096 shadow:basedir = $shadow_basedir
2097 shadow:snapdir = $shadow_basedir/.snapshots
2098 shadow:delimiter = \@GMT
2099 shadow:snapprefix = [a-z]*
2100 shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2103 path = $shadow_shrdir
2104 comment = previous versions with wide links allowed
2105 vfs objects = shadow_copy2
2106 shadow:mountpoint = $shadow_mntdir
2109 path = $shrdir/dfree
2110 vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2111 admin users = $unix_name
2112 include = $dfqconffile
2114 path = $shrdir/dfree
2115 vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2117 include = $dfqconffile
2118 [acl_xattr_ign_sysacl_posix]
2120 acl_xattr:ignore system acls = yes
2121 acl_xattr:default acl style = posix
2122 [acl_xattr_ign_sysacl_windows]
2124 acl_xattr:ignore system acls = yes
2125 acl_xattr:default acl style = windows
2129 mangled names = illegal
2133 path = $nosymlinks_shrdir
2134 follow symlinks = no
2138 path = $local_symlinks_shrdir
2139 follow symlinks = yes
2143 kernel oplocks = yes
2144 vfs objects = streams_xattr xattr_tdb
2148 vfs objects = streams_xattr xattr_tdb
2152 smbd:find async delay usec = 10000
2155 vfs objects = error_inject
2156 include = $libdir/error_inject.conf
2160 my $net = Samba::bindir_path($self, "net");
2162 $cmd .= "SMB_CONF_PATH=\"$conffile\" ";
2163 $cmd .= "$net setlocalsid $samsid";
2165 if (system($cmd) != 0) {
2166 warn("Join failed\n$cmd");
2170 unless (open(DFQCONF, ">$dfqconffile")) {
2171 warn("Unable to open $dfqconffile");
2177 ## create a test account
2180 unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2181 warn("Unable to open $nss_wrapper_passwd");
2184 print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2185 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2186 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2187 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2188 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2189 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2190 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2191 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2192 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2193 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2195 if ($unix_uid != 0) {
2196 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2201 unless (open(GROUP, ">$nss_wrapper_group")) {
2202 warn("Unable to open $nss_wrapper_group");
2205 print GROUP "nobody:x:$gid_nobody:
2206 nogroup:x:$gid_nogroup:nobody
2207 $unix_name-group:x:$unix_gids[0]:
2208 domusers:X:$gid_domusers:
2209 domadmins:X:$gid_domadmins:
2210 userdup:x:$gid_userdup:$unix_name
2211 everyone:x:$gid_everyone:
2212 force_user:x:$gid_force_user:
2214 if ($unix_gids[0] != 0) {
2215 print GROUP "root:x:$gid_root:
2222 my $hostname = lc($server);
2223 unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2224 warn("Unable to open $nss_wrapper_hosts");
2227 print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2228 print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2232 unless (open(RESOLV_CONF, ">$resolv_conf")) {
2233 warn("Unable to open $resolv_conf");
2236 if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2237 if (defined($dc_server_ip)) {
2238 print RESOLV_CONF "nameserver $dc_server_ip\n";
2240 if (defined($dc_server_ipv6)) {
2241 print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2244 print RESOLV_CONF "nameserver ${server_ip}\n";
2245 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2249 foreach my $evlog (@eventlog_list) {
2250 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2251 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2255 $createuser_env{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2256 $createuser_env{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2257 $createuser_env{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2258 $createuser_env{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2259 if ($ENV{SAMBA_DNS_FAKING}) {
2260 $createuser_env{RESOLV_WRAPPER_CONF} = $resolv_conf;
2262 $createuser_env{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2265 createuser($self, $unix_name, $password, $conffile, \%createuser_env) || die("Unable to create user");
2266 createuser($self, "force_user", $password, $conffile, \%createuser_env) || die("Unable to create force_user");
2267 createuser($self, "smbget_user", $password, $conffile, \%createuser_env) || die("Unable to create smbget_user");
2268 createuser($self, "user1", $password, $conffile, \%createuser_env) || die("Unable to create user1");
2269 createuser($self, "user2", $password, $conffile, \%createuser_env) || die("Unable to create user2");
2271 open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2272 print DNS_UPDATE_LIST "A $server. $server_ip\n";
2273 print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2274 close(DNS_UPDATE_LIST);
2278 $ret{SERVER_IP} = $server_ip;
2279 $ret{SERVER_IPV6} = $server_ipv6;
2280 $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2281 $ret{NMBD_TEST_LOG_POS} = 0;
2282 $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2283 $ret{WINBINDD_TEST_LOG_POS} = 0;
2284 $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2285 $ret{SMBD_TEST_LOG_POS} = 0;
2286 $ret{SERVERCONFFILE} = $conffile;
2287 $ret{CONFIGURATION} ="-s $conffile";
2288 $ret{LOCK_DIR} = $lockdir;
2289 $ret{SERVER} = $server;
2290 $ret{USERNAME} = $unix_name;
2291 $ret{USERID} = $unix_uid;
2292 $ret{DOMAIN} = $domain;
2293 $ret{SAMSID} = $samsid;
2294 $ret{NETBIOSNAME} = $server;
2295 $ret{PASSWORD} = $password;
2296 $ret{PIDDIR} = $piddir;
2297 $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2298 $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2299 $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2300 $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2301 $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2302 $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2303 $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2304 $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2305 $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2306 if ($ENV{SAMBA_DNS_FAKING}) {
2307 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2309 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2311 $ret{LOCAL_PATH} = "$shrdir";
2312 $ret{LOGDIR} = $logdir;
2315 # Avoid hitting system krb5.conf -
2316 # An env that needs Kerberos will reset this to the real
2319 $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2321 # Define KRB5CCNAME for each environment we set up
2322 $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2323 $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2328 sub wait_for_start($$$$$)
2330 my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2335 if ($nmbd eq "yes") {
2338 # give time for nbt server to register its names
2339 print "checking for nmbd\n";
2341 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2342 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2345 $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2349 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2350 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2351 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2352 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2355 } while ($ret != 0 && $count < 10);
2357 print "NMBD not reachable after 10 retries\n";
2358 teardown_env($self, $envvars);
2363 if ($winbindd eq "yes") {
2364 print "checking for winbindd\n";
2366 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2367 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2368 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2369 $cmd .= Samba::bindir_path($self, "wbinfo") . " --ping-dc";
2373 $ret = system($cmd);
2377 } while ($ret != 0 && $count < 20);
2379 print "WINBINDD not reachable after 20 seconds\n";
2380 teardown_env($self, $envvars);
2385 if ($smbd eq "yes") {
2386 # make sure smbd is also up set
2387 print "wait for smbd\n";
2391 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2396 } while ($ret != 0 && $count < 20);
2398 print "SMBD failed to start up in a reasonable time (20sec)\n";
2399 teardown_env($self, $envvars);
2404 # Ensure we have domain users mapped.
2405 $netcmd = "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2406 $netcmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2407 $netcmd .= Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} ";
2409 $cmd = $netcmd . "groupmap add rid=513 unixgroup=domusers type=domain";
2410 $ret = system($cmd);
2412 print("\"$cmd\" failed\n");
2416 $cmd = $netcmd . "groupmap add rid=512 unixgroup=domadmins type=domain";
2417 $ret = system($cmd);
2419 print("\"$cmd\" failed\n");
2423 $cmd = $netcmd . "groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin";
2424 $ret = system($cmd);
2426 print("\"$cmd\" failed\n");
2430 # note: creating builtin groups requires winbindd for the
2432 my $create_builtin_users = "no";
2433 if ($winbindd eq "yes") {
2434 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2435 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2436 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2437 $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2438 my $wbinfo_out = qx($cmd 2>&1);
2440 # wbinfo doesn't give us a better error code then
2441 # WBC_ERR_DOMAIN_NOT_FOUND, but at least that's
2442 # different then WBC_ERR_WINBIND_NOT_AVAILABLE
2443 if ($wbinfo_out !~ /WBC_ERR_DOMAIN_NOT_FOUND/) {
2444 print("Failed to run \"wbinfo --sid-to-gid=S-1-5-32-545\": $wbinfo_out");
2445 teardown_env($self, $envvars);
2448 $create_builtin_users = "yes";
2451 if ($create_builtin_users eq "yes") {
2452 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2453 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2454 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2455 $cmd .= Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2456 $cmd .= "sam createbuiltingroup Users";
2457 $ret = system($cmd);
2459 print "Failed to create BUILTIN\\Users group\n";
2460 teardown_env($self, $envvars);
2464 $cmd = Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2465 $cmd .= "cache del IDMAP/SID2XID/S-1-5-32-545";
2468 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2469 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2470 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2471 $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2472 $ret = system($cmd);
2474 print "Missing \"BUILTIN\\Users\", did net sam createbuiltingroup Users fail?\n";
2475 teardown_env($self, $envvars);
2480 print $self->getlog_env($envvars);