Merge tag 'gvt-next-2020-04-22' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-04-22

- remove non-upstream xen support bits (Christoph)
- guest context shadow copy optimization (Yan)
- guest context tracking for shadow skip optimization (Yan)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422051230.GH11247@zhen-hp.sh.intel.com

drm/i915/selftests: Add tiled blits selftest

Extend coverage of the blitter client by exercising conversion to and
from tiled sources. In the process we perform spot checks to verify that
the tiling/detiling is being applied correctly, along with position
invariance of the tiling parameters.

Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430064957.14942-1-chris@chris-wilson.co.uk

drm/i915/gt: Restore aggressive post-boost downclocking

We reduced the clocks slowly after a boost event based on the
observation that the smoothness of animations suffered. However, since
reducing the evalution intervals, we should be able to respond to the
rapidly fluctuating workload of a simple desktop animation and so
restore the more aggressive downclocking.

References: 2a8862d2f3da ("drm/i915: Reduce the RPS shock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-6-chris@chris-wilson.co.uk

drm/i915/gt: Apply the aggressive downclocking to parking

We treat parking as a manual RPS timeout event, and downclock the GPU
for the next unpark and batch execution. However, having restored the
aggressive downclocking and observed that we have very light workloads
whose only interaction is through the manual parking events, carry over
the aggressive downclocking to the fake RPS events.

References: 21abf0bf168d ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-5-chris@chris-wilson.co.uk

drm/i915/gt: Switch to manual evaluation of RPS

As with the realisation for soft-rc6, we respond to idling the engines
within microseconds, far faster than the response times for HW RC6 and
RPS. Furthermore, our fast parking upon idle, prevents HW RPS from
running for many desktop workloads, as the RPS evaluation intervals are
on the order of tens of milliseconds, but the typical workload is just a
couple of milliseconds, but yet we still need to determine the best
frequency for user latency versus power.

Recognising that the HW evaluation intervals are a poor fit, and that
they were deprecated [in bspec at least] from gen10, start to wean
ourselves off them and replace the EI with a timer and our accurate
busy-stats. The principle benefit of manually evaluating RPS intervals
is that we can be more responsive for better performance and powersaving
for both spiky workloads and steady-state.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698
Fixes: 98479ada421a ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-4-chris@chris-wilson.co.uk

drm/i915/gt: Track use of RPS interrupts in flags

Use the new intel_rps.flags field to store whether or not interrupts are
being used with RPS.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-3-chris@chris-wilson.co.uk

drm/i915/gt: Move rps.enabled/active to flags

Pull the boolean intel_rps.enabled and intel_rps.active into a single
flags field, in preparation for more.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-2-chris@chris-wilson.co.uk

drm/i915/gt: Always enable busy-stats for execlists

In the near future, we will utilize the busy-stats on each engine to
approximate the C0 cycles of each, and use that as an input to a manual
RPS mechanism. That entails having busy-stats always enabled and so we
can remove the enable/disable routines and simplify the pmu setup. As a
consequence of always having the stats enabled, we can also show the
current active time via sysfs/engine/xcs/active_time_ns.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk

drm/i915/gt: Keep a no-frills swappable copy of the default context state

We need to keep the default context state around to instantiate new
contexts (aka golden rendercontext), and we also keep it pinned while
the engine is active so that we can quickly reset a hanging context.
However, the default contexts are large enough to merit keeping in
swappable memory as opposed to kernel memory, so we store them inside
shmemfs. Currently, we use the normal GEM objects to create the default
context image, but we can throw away all but the shmemfs file.

This greatly simplifies the tricky power management code which wants to
run underneath the normal GT locking, and we definitely do not want to
use any high level objects that may appear to recurse back into the GT.
Though perhaps the primary advantage of the complex GEM object is that
we aggressively cache the mapping, but here we are recreating the
vm_area everytime time we unpark. At the worst, we add a lightweight
cache, but first find a microbenchmark that is impacted.

Having started to create some utility functions to make working with
shmemfs objects easier, we can start putting them to wider use, where
GEM objects are overkill, such as storing persistent error state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk

drm/i915/selftests: fix error handling in __live_lrc_indirect_ctx_bb()

If intel_context_create() fails then it leads to an error pointer
dereference.  I shuffled things around to make error handling easier.

Fixes: 1dd47b54baea ("drm/i915: Add live selftests for indirect ctx batchbuffers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429132425.GE815283@mwanda

drm/i915: Avoid dereferencing a dead context

Once the intel_context is closed, the GEM context may be freed and so
the link from intel_context.gem_context is invalid.

<3>[  219.782944] BUG: KASAN: use-after-free in intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<3>[  219.782996] Read of size 8 at addr ffff8881d7dff0b8 by task kworker/0:1/12

<4>[  219.783052] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G     U            5.7.0-rc2-g1f3ffd7683d54-kasan_118+ #1
<4>[  219.783055] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017
<4>[  219.783105] Workqueue: events heartbeat [i915]
<4>[  219.783109] Call Trace:
<4>[  219.783113]  <IRQ>
<4>[  219.783119]  dump_stack+0x96/0xdb
<4>[  219.783177]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783182]  print_address_description.constprop.6+0x16/0x310
<4>[  219.783239]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783295]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783300]  __kasan_report+0x137/0x190
<4>[  219.783359]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783366]  kasan_report+0x32/0x50
<4>[  219.783426]  intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783481]  execlists_reset+0x39c/0x13d0 [i915]
<4>[  219.783494]  ? mark_held_locks+0x9e/0xe0
<4>[  219.783546]  ? execlists_hold+0xfc0/0xfc0 [i915]
<4>[  219.783551]  ? lockdep_hardirqs_on+0x348/0x5f0
<4>[  219.783557]  ? _raw_spin_unlock_irqrestore+0x34/0x60
<4>[  219.783606]  ? execlists_submission_tasklet+0x118/0x3a0 [i915]
<4>[  219.783615]  tasklet_action_common.isra.14+0x13b/0x410
<4>[  219.783623]  ? __do_softirq+0x1e4/0x9a7
<4>[  219.783630]  __do_softirq+0x226/0x9a7
<4>[  219.783643]  do_softirq_own_stack+0x2a/0x40
<4>[  219.783647]  </IRQ>
<4>[  219.783692]  ? heartbeat+0x3e2/0x10f0 [i915]
<4>[  219.783696]  do_softirq.part.13+0x49/0x50
<4>[  219.783700]  __local_bh_enable_ip+0x1a2/0x1e0
<4>[  219.783748]  heartbeat+0x409/0x10f0 [i915]
<4>[  219.783801]  ? __live_idle_pulse+0x9f0/0x9f0 [i915]
<4>[  219.783806]  ? lock_acquire+0x1ac/0x8a0
<4>[  219.783811]  ? process_one_work+0x811/0x1870
<4>[  219.783827]  ? rcu_read_lock_sched_held+0x9c/0xd0
<4>[  219.783832]  ? rcu_read_lock_bh_held+0xb0/0xb0
<4>[  219.783836]  ? _raw_spin_unlock_irq+0x1f/0x40
<4>[  219.783845]  process_one_work+0x8ca/0x1870
<4>[  219.783848]  ? lock_acquire+0x1ac/0x8a0
<4>[  219.783852]  ? worker_thread+0x1d0/0xb80
<4>[  219.783864]  ? pwq_dec_nr_in_flight+0x2c0/0x2c0
<4>[  219.783870]  ? do_raw_spin_lock+0x129/0x290
<4>[  219.783886]  worker_thread+0x82/0xb80
<4>[  219.783895]  ? __kthread_parkme+0xaf/0x1b0
<4>[  219.783902]  ? process_one_work+0x1870/0x1870
<4>[  219.783906]  kthread+0x34e/0x420
<4>[  219.783911]  ? kthread_create_on_node+0xc0/0xc0
<4>[  219.783918]  ret_from_fork+0x3a/0x50

<3>[  219.783950] Allocated by task 1264:
<4>[  219.783975]  save_stack+0x19/0x40
<4>[  219.783978]  __kasan_kmalloc.constprop.3+0xa0/0xd0
<4>[  219.784029]  i915_gem_create_context+0xa2/0xab8 [i915]
<4>[  219.784081]  i915_gem_context_create_ioctl+0x1fa/0x450 [i915]
<4>[  219.784085]  drm_ioctl_kernel+0x1d8/0x270
<4>[  219.784088]  drm_ioctl+0x676/0x930
<4>[  219.784092]  ksys_ioctl+0xb7/0xe0
<4>[  219.784096]  __x64_sys_ioctl+0x6a/0xb0
<4>[  219.784100]  do_syscall_64+0x94/0x530
<4>[  219.784103]  entry_SYSCALL_64_after_hwframe+0x49/0xb3

<3>[  219.784120] Freed by task 12:
<4>[  219.784141]  save_stack+0x19/0x40
<4>[  219.784145]  __kasan_slab_free+0x130/0x180
<4>[  219.784148]  kmem_cache_free_bulk+0x1bd/0x500
<4>[  219.784152]  kfree_rcu_work+0x1d8/0x890
<4>[  219.784155]  process_one_work+0x8ca/0x1870
<4>[  219.784158]  worker_thread+0x82/0xb80
<4>[  219.784162]  kthread+0x34e/0x420
<4>[  219.784165]  ret_from_fork+0x3a/0x50

Fixes: 2e46a2a0b014 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428090255.10035-1-chris@chris-wilson.co.uk

drm/i915/gt: Avoid uninitialized use of rpcurupei in frequency_show

When building with clang + -Wuninitialized:

drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:407:7: warning: variable
'rpcurupei' is uninitialized when used here [-Wuninitialized]
                           rpcurupei,
                           ^~~~~~~~~
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:304:16: note: initialize the
variable 'rpcurupei' to silence this warning
                u32 rpcurupei, rpcurup, rpprevup;
                             ^
                              = 0
1 warning generated.

rpupei is assigned twice; based on the second argument to
intel_uncore_read, it seems this one should have been assigned to
rpcurupei.

Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Link: https://github.com/ClangBuiltLinux/linux/issues/1016
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429030051.920203-1-natechancellor@gmail.com

drm/i915/execlists: Verify we don't submit two identical CCIDs

Check that we do not submit two contexts into ELSP with the same CCID
[upper portion of the descriptor].

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1793
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-3-chris@chris-wilson.co.uk

drm/i915/execlists: Track inflight CCID

The presumption is that by using a circular counter that is twice as
large as the maximum ELSP submission, we would never reuse the same CCID
for two inflight contexts.

However, if we continually preempt an active context such that it always
remains inflight, it can be resubmitted with an arbitrary number of
paired contexts. As each of its paired contexts will use a new CCID,
eventually it will wrap and submit two ELSP with the same CCID.

Rather than use a simple circular counter, switch over to a small bitmap
of inflight ids so we can avoid reusing one that is still potentially
active.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-2-chris@chris-wilson.co.uk

drm/i915/execlists: Avoid reusing the same logical CCID

The bspec is confusing on the nature of the upper 32bits of the LRC
descriptor. Once upon a time, it said that it uses the upper 32b to
decide if it should perform a lite-restore, and so we must ensure that
each unique context submitted to HW is given a unique CCID [for the
duration of it being on the HW]. Currently, this is achieved by using
a small circular tag, and assigning every context submitted to HW a
new id. However, this tag is being cleared on repinning an inflight
context such that we end up re-using the 0 tag for multiple contexts.

To avoid accidentally clearing the CCID in the upper 32bits of the LRC
descriptor, split the descriptor into two dwords so we can update the
GGTT address separately from the CCID.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-1-chris@chris-wilson.co.uk

drm/i915/tgl: Wa_14011059788

Reflect recent Bspec changes

v2: fix whitespace, typo

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Radhakrishna Sripada <Radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415193535.14597-1-matthew.s.atwood@intel.com

drm/i915/selftests: Tweak the tolerance for clock ticks to 12.5%

Give a small bump for our tolerance on comparing the expected vs
measured clock ticks/time from 10% to 12.5% to accommodate a bad result
on Sandybridge that was off by 10.3%. Hopefully, that is the worst we
will see.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1802
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428114307.5153-1-chris@chris-wilson.co.uk

drm/i915/gt: fix spelling mistake "evalution" -> "evaluation"

There is a spelling mistaking in a pr_notice message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428084920.1035125-1-colin.king@canonical.com

drm/i915: Use proper fault mask in interrupt postinstall too

The IRQ postinstall handling had open-coded pipe fault mask selection
that never got updated for gen11.  Switch it to use
gen8_de_pipe_fault_mask() to ensure we don't miss updates for new
platforms.

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: d506a65d56fd ("drm/i915: Catch GTT fault errors for gen11+ planes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/gt: Fix up clock frequency

The bspec lists both the clock frequency and the effective interval. The
interval corresponds to observed behaviour, so adjust the frequency to
match.

v2: Mika rightfully asked if we could measure the clock frequency from a
selftest.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427154554.12736-1-chris@chris-wilson.co.uk

drm/i915/gt: Sanitize GT first

We see that if the HW doesn't actually sleep, the HW may eat the poison
we set in its write-only HWSP during sanitize:

  intel_gt_resume.part.8: 0000:00:02.0
  __gt_unpark: 0000:00:02.0
  gt_sanitize: 0000:00:02.0 force:yes
  process_csb: 0000:00:02.0 vcs0: cs-irq head=5, tail=90
  process_csb: 0000:00:02.0 vcs0: csb[0]: status=0x5a5a5a5a:0x5a5a5a5a
  assert_pending_valid: Nothing pending for promotion!

The CS TAIL pointer should have been reset by reset_csb_pointers(), so
in this case it is likely that we have read back from the CPU cache and
so we must clflush our control over that page. In doing so, push the
sanitisation to the start of the GT sequence so that our poisoning is
assuredly before we start talking to the HW.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427084000.10999-1-chris@chris-wilson.co.uk

drm/i915/gt: Check cacheline is valid before acquiring

The hwsp_cacheline pointer from i915_request is very, very flimsy. The
i915_request.timeline (and the hwsp_cacheline) are lost upon retiring
(after an RCU grace). Therefore we need to confirm that once we have the
right pointer for the cacheline, it is not in the process of being
retired and disposed of before we attempt to acquire a reference to the
cacheline.

<3>[  547.208237] BUG: KASAN: use-after-free in active_debug_hint+0x6a/0x70 [i915]
<3>[  547.208366] Read of size 8 at addr ffff88822a0d2710 by task gem_exec_parall/2536

<4>[  547.208547] CPU: 3 PID: 2536 Comm: gem_exec_parall Tainted: G     U            5.7.0-rc2-ged7a286b5d02d-kasan_117+ #1
<4>[  547.208556] Hardware name: Dell Inc. XPS 13 9350/, BIOS 1.4.12 11/30/2016
<4>[  547.208564] Call Trace:
<4>[  547.208579]  dump_stack+0x96/0xdb
<4>[  547.208707]  ? active_debug_hint+0x6a/0x70 [i915]
<4>[  547.208719]  print_address_description.constprop.6+0x16/0x310
<4>[  547.208841]  ? active_debug_hint+0x6a/0x70 [i915]
<4>[  547.208963]  ? active_debug_hint+0x6a/0x70 [i915]
<4>[  547.208975]  __kasan_report+0x137/0x190
<4>[  547.209106]  ? active_debug_hint+0x6a/0x70 [i915]
<4>[  547.209127]  kasan_report+0x32/0x50
<4>[  547.209257]  ? i915_gemfs_fini+0x40/0x40 [i915]
<4>[  547.209376]  active_debug_hint+0x6a/0x70 [i915]
<4>[  547.209389]  debug_print_object+0xa7/0x220
<4>[  547.209405]  ? lockdep_hardirqs_on+0x348/0x5f0
<4>[  547.209426]  debug_object_assert_init+0x297/0x430
<4>[  547.209449]  ? debug_object_free+0x360/0x360
<4>[  547.209472]  ? lock_acquire+0x1ac/0x8a0
<4>[  547.209592]  ? intel_timeline_read_hwsp+0x4f/0x840 [i915]
<4>[  547.209737]  ? i915_active_acquire_if_busy+0x66/0x120 [i915]
<4>[  547.209861]  i915_active_acquire_if_busy+0x66/0x120 [i915]
<4>[  547.209990]  ? __live_alloc.isra.15+0xc0/0xc0 [i915]
<4>[  547.210005]  ? rcu_read_lock_sched_held+0xd0/0xd0
<4>[  547.210017]  ? print_usage_bug+0x580/0x580
<4>[  547.210153]  intel_timeline_read_hwsp+0xbc/0x840 [i915]
<4>[  547.210284]  __emit_semaphore_wait+0xd5/0x480 [i915]
<4>[  547.210415]  ? i915_fence_get_timeline_name+0x110/0x110 [i915]
<4>[  547.210428]  ? lockdep_hardirqs_on+0x348/0x5f0
<4>[  547.210442]  ? _raw_spin_unlock_irq+0x2a/0x40
<4>[  547.210567]  ? __await_execution.constprop.51+0x2e0/0x570 [i915]
<4>[  547.210706]  i915_request_await_dma_fence+0x8f7/0xc70 [i915]

Fixes: 85bedbf191e8 ("drm/i915/gt: Eliminate the trylock for reading a timeline's hwsp")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427093038.29219-1-chris@chris-wilson.co.uk

drm/i915/execlists: Check preempt-timeout target before submit_ports

We evaluate *active, which is a pointer into execlists->inflight[]
during dequeue to decide how long a preempt-timeout we need to apply.
However, as soon as we do the submit_ports, the HW may send its ACK
interrupt causing us to promote execlists->pending[] tp
execlists->inflight[], overwriting the value of *active. We know *active
is only stable until we submit (as we only submit when there is no
pending promotion).

[   16.102328] BUG: KCSAN: data-race in execlists_dequeue+0x1449/0x1600 [i915]
[   16.102356]
[   16.102375] race at unknown origin, with read to 0xffff8881e9500488 of 8 bytes by task 429 on cpu 1:
[   16.102780]  execlists_dequeue+0x1449/0x1600 [i915]
[   16.103160]  __execlists_submission_tasklet+0x48/0x60 [i915]
[   16.103540]  execlists_submit_request+0x38e/0x3c0 [i915]
[   16.103940]  submit_notify+0x8f/0xc0 [i915]
[   16.104308]  __i915_sw_fence_complete+0x61/0x420 [i915]
[   16.104683]  i915_sw_fence_complete+0x58/0x80 [i915]
[   16.105054]  i915_sw_fence_commit+0x16/0x20 [i915]
[   16.105457]  __i915_request_queue+0x60/0x70 [i915]
[   16.105843]  i915_gem_do_execbuffer+0x2d6b/0x4230 [i915]
[   16.106227]  i915_gem_execbuffer2_ioctl+0x2b0/0x580 [i915]
[   16.106257]  drm_ioctl_kernel+0xe9/0x130
[   16.106279]  drm_ioctl+0x27d/0x45e
[   16.106311]  ksys_ioctl+0x89/0xb0
[   16.106336]  __x64_sys_ioctl+0x42/0x60
[   16.106370]  do_syscall_64+0x6e/0x2c0
[   16.106397]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200426094231.21995-1-chris@chris-wilson.co.uk

drm/i915: re-disable -Wframe-address

The top level Makefile disables this warning. When building an
i386_defconfig with Clang, this warning is triggered a whole bunch via
includes of headers from perf.

Link: https://github.com/ClangBuiltLinux/continuous-integration/pull/182
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200426214215.139435-1-ndesaulniers@google.com

drm/i915: Use indirect ctx bb to mend CMD_BUF_CCTL

Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption.

v2: add to lrc layout (Chris)
v3: end to a cacheline (Chris)
v4: add to lrc fixed (Chris)
v5: value in offset+1

Testcase: igt/i915_selftest/gt_lrc
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424230632.30333-1-mika.kuoppala@linux.intel.com

drm/i915: Add live selftests for indirect ctx batchbuffers

Indirect ctx batchbuffers are a hw feature of which
batch can be run, by hardware, during context restoration stage.
Driver can setup a batchbuffer and also an offset into the
context image. When context image is marshalled from
memory to registers, and when the offset from the start of
context register state is equal of what driver pre-determined,
batch will run. So one can manipulate context restoration
process at cacheline granularity, given some limitations,
as you need to have rudimentaries in place before you can
run a batch.

Add selftest which will write the ring start register
to a canary spot. This will test that hardware will run a
batchbuffer for the context in question.

v2: request wait fix, naming (Chris)
v3: test order (Chris)
v4: rebase

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424214841.28076-3-mika.kuoppala@linux.intel.com

drm/i915: Add per ctx batchbuffer wa for timestamp

Restoration of a previous timestamp can collide
with updating the timestamp, causing a value corruption.

Combat this issue by using indirect ctx bb to
modify the context image during restoring process.

We can preload value into scratch register. From which
we then do the actual write with LRR. LRR is faster and
thus less error prone as probability of race drops.

v2: tidying (Chris)
v3: lrr for all engines
v4: grp
v5: reg bit
v6: wa_bb_offset, virtual engines (Chris)

References: HSDES#16010904313
Testcase: igt/i915_selftest/gt_lrc
Suggested-by: Joseph Koston <joseph.koston@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424230546.30271-1-mika.kuoppala@linux.intel.com

drm/i915: Add engine scratch register to live_lrc_fixed

General purpose registers are per engine and
in a fixed location. Add to live_lrc_fixed.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424214841.28076-1-mika.kuoppala@linux.intel.com

drm/i915: Drop rq->ring->vma peeking from error capture

We only hold the active spinlock while dumping the error state, and this
does not prevent another thread from retiring the request -- as it is
quite possible that despite us capturing the current state, the GPU has
completed the request. As such, it is dangerous to dereference state
below the request as it may already be freed, and the simplest way to
avoid the danger is not include it in the error state.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1788
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424191410.27570-1-chris@chris-wilson.co.uk

drm/i915/gt: Use the RPM config register to determine clk frequencies

For many configuration details within RC6 and RPS we are programming
intervals for the internal clocks. From gen11, these clocks are
configuration via the RPM_CONFIG and so for convenience, we would like
to convert to/from more natural units (ns).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424162805.25920-2-chris@chris-wilson.co.uk

drm/i915/gt: Trace RPS events

Add tracek to the RPS events (interrupts, worker, enabling, threshold
selection, frequency setting), so that if we have to debug reticent HW
we have some traces to start from.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424162805.25920-1-chris@chris-wilson.co.uk

drm/i915/gt: Prefer soft-rc6 over RPS DOWN_TIMEOUT

The RPS DOWN_TIMEOUT interrupt is signaled after a period of rc6, and
upon receipt of that interrupt we reprogram the GPU clocks down to the
next idle notch [to help convserve power during rc6]. However, on
execlists, we benefit from soft-rc6 immediately parking the GPU and
setting idle frequencies upon idling [within a jiffie], and here the
interrupt prevents us from restarting from our last frequency.

In the process, we can simply opt for a static pm_events mask and rely
on the enable/disable interrupts to flush the worker on parking.

This will reduce the amount of oscillation observed during steady
workloads with microsleeps, as each time the rc6 timeout occurs we
immediately follow with a waitboost for a dropped frame.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422001703.1697-1-chris@chris-wilson.co.uk

drm/i915: Split some long lines

Split some overly long lines.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Introduce .set_idle_link_train() vfunc

Relocate a bunch of DDI specific code from intel_dp.c to intel_ddi.c
by introducing a .set_idle_link_train() vfunc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Introduce .set_signal_levels() vfunc

Sort out some of the mess between intel_ddi.c intel_dp.c by
introducing a .set_signal_levels() vfunc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Introduce .set_link_train() vfunc

Sort out some of the mess between intel_ddi.c intel_dp.c by
introducing a .set_link_train() vfunc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Have pfit calculations return an error code

Change intel_{gmch,pch}_panel_fitting() to return a normal
error vs. success int. We'll need this later to validate that
the margin properties aren't misconfigured.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Pass connector state to pfit calculations

Pass the entire connector state to intel_{gmch,pch}_panel_fitting().
For now we just need to get at .scaling_mode but in the future we'll
want access to the margin properties as well.

v2: Deal with intel_dp_ycbcr420_config()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: s/pipe_config/crtc_state/ in pfit functions

Follow the new naming convention and call the crtc state
"crtc_state", and while at it drop the redundant crtc argument.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Use drm_rect to store the pfit window pos/size

Make things a bit more abstract by replacing the pch_pfit.pos/size
raw register values with a drm_rect. Makes it slighly more convenient
to eg. compute the scaling factors.

v2: Use drm_rect_init()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Flatten a bunch of the pfit functions

Most of the pfit functions are of the form:

func()
{
if (pfit_enabled) {
...
}
}

Flip the pfit_enabled check around to flatten the functions.

And while we're touching all this let's do the usual
s/pipe_config/crtc_state/ replacement.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-2-ville.syrjala@linux.intel.com

drm/i915: Fix skl+ non-scaled pfit modes

Fix skl_update_scaler_crtc() to deal with different scaling
modes correctly. The current implementation assumes
DRM_MODE_SCALE_FULLSCREEN. Fortunately we don't expose any
border properties currently so the code does actually end
up doing the right thing (assigning a scaler for pfit).
The code does need to be fixed before any borders are
exposed.

Also we have redundant calls to skl_update_scaler_crtc() in
dp/hdmi .compute_config() which can be nuked. They were anyway
called before we had even computed the pfit state so were
basically nonsense. The real call we need to keep is in
intel_crtc_atomic_check().

v2: Deal witrh skl_update_scaler_crtc() in intel_dp_ycbcr420_config()

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-1-ville.syrjala@linux.intel.com

drm/i915: Only close vma we open

The history of i915_vma_close() is confusing, as is its use. As the
lifetime of the i915_vma is currently bounded by the object it is
attached to, we needed a means of identify when a vma was no longer in
use by userspace (via the user's fd). This is further complicated by
that only ppgtt vma should be closed at the user's behest, as the ggtt
were always shared.

Now that we attach the vma to a lut on the user's context, the open
count does indicate how many unique and open context/vm are referencing
this vma from the user. As such, we can and should just use the
open_count to track when the vma is still in use by userspace.

It's a poor man's replacement for reference counting.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1193
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422190558.30509-1-chris@chris-wilson.co.uk

drm/i915: Make define for lrc state offset

More often than not, we need a byte offset into lrc
register state from the start of the hw state. Make it so.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423182355.21837-3-mika.kuoppala@linux.intel.com

drm/i915/selftests: Add context batchbuffers registers to live_lrc_fixed

Add per ctx bb and indirect ctx bb register locations to live_lrc_fixed
for verification.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423224159.22078-1-chris@chris-wilson.co.uk

drm/i915/selftests: Add request throughput measurement to perf

Under ideal circumstances, the driver should be able to keep the GPU
fully saturated with work. Measure how close to ideal we get under the
harshest of conditions with no user payload.

v2: Also measure throughput using only one thread.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422074203.9799-1-chris@chris-wilson.co.uk

drm/i915/gt: Check carefully for an idle engine in wait-for-idle

intel_gt_wait_for_idle() tries to wait until all the outstanding requests
are retired and the GPU is idle. As a side effect of retiring requests,
we may submit more work to flush any pm barriers, and so the
wait-for-idle tries to flush the background pm work and catch the new
requests. However, if the work completed in the background before we
were able to flush, it would queue the extra barrier request without us
noticing -- and so we would return from wait-for-idle with one request
remaining. (This breaks e.g. record_default_state where we need to wait
until that barrier is retired, and it may slow suspend down by causing
us to wait on the background retirement worker as opposed to immediately
retiring the barrier.)

However, since we track if there has been a submission since the engine
pm barrier, we can very quickly detect if the idle barrier is still
outstanding.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1763
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423085940.28168-1-chris@chris-wilson.co.uk

drm/i915/gt: Carefully order virtual_submission_tasklet

During the virtual engine's submission tasklet, we take the request and
insert into the submission queue on each of our siblings. This seems
quite simply, and so no problems with ordering. However, the sibling
execlists' submission tasklets may run concurrently with the virtual
engine's tasklet, submitting the request to HW before the virtual
finishes its task of telling all the siblings. If this happens, the
sibling tasklet may *reorder* the ve->sibling[] array that the virtual
engine tasklet is processing. This can *only* reorder within the
elements already processed by the virtual engine, nevertheless the
race is detected by KCSAN:

[  185.580014] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915]
[  185.580054]
[  185.580076] write to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 2:
[  185.580553]  execlists_dequeue+0x6ad/0x1600 [i915]
[  185.581044]  __execlists_submission_tasklet+0x48/0x60 [i915]
[  185.581517]  execlists_submission_tasklet+0xd3/0x170 [i915]
[  185.581554]  tasklet_action_common.isra.0+0x42/0x90
[  185.581585]  __do_softirq+0xc8/0x206
[  185.581613]  run_ksoftirqd+0x15/0x20
[  185.581641]  smpboot_thread_fn+0x15a/0x270
[  185.581669]  kthread+0x19a/0x1e0
[  185.581695]  ret_from_fork+0x1f/0x30
[  185.581717]
[  185.581736] read to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 0:
[  185.582231]  virtual_submission_tasklet+0x10e/0x5c0 [i915]
[  185.582265]  tasklet_action_common.isra.0+0x42/0x90
[  185.582291]  __do_softirq+0xc8/0x206
[  185.582315]  run_ksoftirqd+0x15/0x20
[  185.582340]  smpboot_thread_fn+0x15a/0x270
[  185.582368]  kthread+0x19a/0x1e0
[  185.582395]  ret_from_fork+0x1f/0x30
[  185.582417]

We can prevent this race by checking for the ve->request after looking
up the sibling array.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423115315.26825-1-chris@chris-wilson.co.uk

drm/i915/icl: Fix timeout handling during TypeC AUX power well enabling

Fix the check for when an AUX power well enabling timeout is expected on
a legacy TypeC port.

Fixes: 89e01caac641 ("drm/i915: Use single set of AUX powerwell ops for gen11+")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com

drm/i915/execlists: Drop request-before-CS assertion

When we migrated to execlists, one of the conditions we wanted to test
for was whether the breadcrumb seqno was being written before the
breadcumb interrupt was delivered. This was following on from issues
observed on previous generations which were not so strongly ordered. With
the removal of the missed interrupt detection, we have not reliable
means of detecting the out-of-order seqno/interrupt but instead tried to
assert that the relationship between the CS event interrupt and the
breadwrite should be strongly ordered. However, Icelake proves it is
possible for the HW implementation to forget about minor little details
such as write ordering and so the order between *processing* the CS
event and the breadcrumb is unreliable.

Remove the unreliable assertion, but leave a debug telltale in case we
have reason to suspect.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1658
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422141749.28709-1-chris@chris-wilson.co.uk

drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()

While the ggtt vma are protected by their object lifetime, the list
continues until it hits a non-ggtt vma, and that vma is not protected
and may be freed as we inspect it. Hence, we require the obj->vma.lock
to protect the list as we iterate.

An example of forgetting to hold the obj->vma.lock is

[1642834.464973] general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP PTI
[1642834.464977] CPU: 3 PID: 1954 Comm: Xorg Not tainted 5.6.0-300.fc32.x86_64 #1
[1642834.464979] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET94WW (2.44 ) 09/14/2017
[1642834.465021] RIP: 0010:i915_gem_object_set_tiling+0x2c0/0x3e0 [i915]
[1642834.465024] Code: 8b 84 24 18 01 00 00 f6 c4 80 74 59 49 8b 94 24 a0 00 00 00 49 8b 84 24 e0 00 00 00 49 8b 74 24 10 48 8b 92 30 01 00 00 89 c7 <80> ba 0a 06 00 00 03 0f 87 86 00 00 00 ba 00 00 08 00 b9 00 00 10
[1642834.465025] RSP: 0018:ffffa98780c77d60 EFLAGS: 00010282
[1642834.465028] RAX: ffff8d232bfb2578 RBX: 0000000000000002 RCX: ffff8d25873a0000
[1642834.465029] RDX: dead000000000122 RSI: fffff0af8ac6e408 RDI: 000000002bfb2578
[1642834.465030] RBP: ffff8d25873a0000 R08: ffff8d252bfb5638 R09: 0000000000000000
[1642834.465031] R10: 0000000000000000 R11: ffff8d252bfb5640 R12: ffffa987801cb8f8
[1642834.465032] R13: 0000000000001000 R14: ffff8d233e972e50 R15: ffff8d233e972d00
[1642834.465034] FS:  00007f6a3d327f00(0000) GS:ffff8d25926c0000(0000) knlGS:0000000000000000
[1642834.465036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1642834.465037] CR2: 00007f6a2064d000 CR3: 00000002fb57c001 CR4: 00000000001606e0
[1642834.465038] Call Trace:
[1642834.465083]  i915_gem_set_tiling_ioctl+0x122/0x230 [i915]
[1642834.465121]  ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915]
[1642834.465151]  drm_ioctl_kernel+0x86/0xd0 [drm]
[1642834.465156]  ? avc_has_perm+0x3b/0x160
[1642834.465178]  drm_ioctl+0x206/0x390 [drm]
[1642834.465216]  ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915]
[1642834.465221]  ? selinux_file_ioctl+0x122/0x1c0
[1642834.465226]  ? __do_munmap+0x24b/0x4d0
[1642834.465231]  ksys_ioctl+0x82/0xc0
[1642834.465235]  __x64_sys_ioctl+0x16/0x20
[1642834.465238]  do_syscall_64+0x5b/0xf0
[1642834.465243]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1642834.465245] RIP: 0033:0x7f6a3d7b047b
[1642834.465247] Code: 0f 1e fa 48 8b 05 1d aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed a9 0c 00 f7 d8 64 89 01 48
[1642834.465249] RSP: 002b:00007ffe71adba28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[1642834.465251] RAX: ffffffffffffffda RBX: 000055f99048fa40 RCX: 00007f6a3d7b047b
[1642834.465253] RDX: 00007ffe71adba30 RSI: 00000000c0106461 RDI: 000000000000000e
[1642834.465254] RBP: 0000000000000002 R08: 000055f98f3f1798 R09: 0000000000000002
[1642834.465255] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000080
[1642834.465257] R13: 000055f98f3f1690 R14: 00000000c0106461 R15: 00007ffe71adba30

Now to take the spinlock during the list iteration, we need to break it
down into two phases. In the first phase under the lock, we cannot sleep
and so must defer the actual work to a second list, protected by the
ggtt->mutex.

We also need to hold the spinlock during creation of a new vma to
serialise with updates of the tiling on the object.

Reported-by: Dave Airlie <airlied@redhat.com>
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422072805.17340-1-chris@chris-wilson.co.uk

drm/i915/selftests: Try to detect rollback during batchbuffer preemption

Since batch buffers dominant execution time, most preemption requests
should naturally occur during execution of a batch buffer. We wish to
verify that should a preemption occur within a batch buffer, when we
come to restart that batch buffer, it occurs at the interrupted
instruction and most importantly does not rollback to an earlier point.

v2: Do not clear the GPR at the start of the batch, but rely on them
being clear for new contexts.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422100903.25216-1-chris@chris-wilson.co.uk

drm/i915/selftests: Disable heartbeat around RPS interrupt testing

For verifying reciving the EI interrupts, we need to hold the GPU in
very precise conditions (in terms of C0 cycles during the EI). If we
preempt the busy load to handle the heartbeat, this may perturb the busy
load causing us to miss the interrupt.

The other tests, while not as time sensitive, may also be slightly
perturbed, so apply the heartbeat protection across all the
measurements.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422083855.26842-1-chris@chris-wilson.co.uk

drm/i915/selftests: Unroll the CS frequency loop

Having noticed that MI_BB_START is incurring a memory stall (see the
correlation with uncore frequency), we have to unroll the loop in order
to diminish the impact of the MI_BB_START on the instruction throughput.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421171351.19575-1-chris@chris-wilson.co.uk

drm/i915/gt: Poison residual state [HWSP] across resume.

Since we may lose the content of any buffer when we relinquish control
of the system (e.g. suspend/resume), we have to be careful not to rely
on regaining control. A good method to detect when we might be using
garbage is by always injecting that garbage prior to first use on
load/resume/etc.

v2: Drop sanitize callback on cleanup
v3: Move seqno reset to timeline enter, so we reset all timelines.
However, this is done on every activation during runtime and not reset.
The similar level of paranoia we apply to correcting context state after
a period of inactivity.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421092504.7416-1-chris@chris-wilson.co.uk

drm/i915/selftests: Disable C-states when measuring RPS frequency response

Let's isolate the impact of cpu frequency selection on determing the GPU
throughput in response to selection of RPS frequencies.

For real systems, we do have to be concerned with the impact of
integrating c-states, p-states and rp-states, but for the sake of
proving whether or not RPS works, one baby step at a time.

For the record, as one would hope, it does not seem to impact on the
measured performance, but we do it anyway to reduce the number of
variables. Later, we can extend the testing to encourage the the
cpu/pkg to try and sleep while the GPU is busy.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421142236.8614-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20200421142236.8614-1-chris@chris-wilson.co.uk

drm/i915/selftests: Show the full scaling curve on failure

If we detect that the RPS end points do not scale perfectly, take the
time to measure all the in between values as well. We are aborting the
test, so we might as well spend the available time gathering critical
debug information instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421124636.22554-1-chris@chris-wilson.co.uk

drm/i915/selftests: Show the pstate limits on any failure to reset min

We want to see the pstate limits whenever we fail to set the minimum
frequency as that may help for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420203040.8984-1-chris@chris-wilson.co.uk

drm/i915/display/vlv_dsi: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-14-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/overlay: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-11-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/global_state: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* calls.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-10-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/frontbuffer: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-9-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/dpll_mgr: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON at places where struct drm_device
pointer can be extracted.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-8-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/display: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON at places where struct drm_device
pointer can be extracted.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-5-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/ddi: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* calls.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-4-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/atomic_plane: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-3-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/icl_dsi: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-2-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/audio: fix compressed_bpp check

The early check for compressed_bpp being zero is too early, as it is hit
also when DSC is not enabled. Move the checks down to where the values
are actually needed. This is a paranoid check for a situation that
should not happen, so we don't really care about handling it gracefully
apart from not oopsing.

Fixes: 48b8b04c791d ("drm/i915/display: Enable DP Display Audio WA")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1750
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420131632.23283-1-jani.nikula@intel.com

drm/i915: drop a bunch of superfluous inlines

Remove a number of inlines from .c files, and let the compiler decide
what's best. There's more to do, but need to start somewhere, and need
to start setting the example.

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-2-jani.nikula@intel.com

drm/i915/hdmi: remove unused intel_hdmi_hdcp2_protocol()

Unused, hiding from the compiler warnings behind the inline keyword.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-1-jani.nikula@intel.com

drm/i915: Use single set of AUX powerwell ops for gen11+

AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
 * Type-C PHY's also require additional Type-C register programming
 * ICL combo PHY's require additional workarounds
 * TGL & EHL combo PHY's can be treated like any other power well

Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.

If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions.  This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.

Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.

v2:
 - ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
   wells.  But we know those wells will only used on Type-C outputs
   anyway, so we can just check is is_tc_tbt flag in the condition.
   (Jose).

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com

drm/i915/selftests: Fix i915_address_space refcnt leak

igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which
returns a reference of the i915_address_space object to "vm" with
increased refcount.

When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the
refcount should be decreased to keep refcount balanced.

The reference counting issue happens in two exception handling paths of
igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns
IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not
decreased, causing a refcnt leak.

Fix this issue by jumping to "out_vm" label when
i915_gem_object_create_internal() returns IS_ERR.

Fixes: a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1587361342-83494-1-git-send-email-xiyuyang19@fudan.edu.cn

drm/i915/selftests: Exercise dynamic reclocking with RPS

After having testing all the RPS controls individually, we need to take
a step back and check how our RPS worker integrates them to perform
dynamic GPU reclocking. So do that by submitting a spinner and wait and
see what happens.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-6-chris@chris-wilson.co.uk

drm/i915/selftests: Show the pcode frequency table on error

If we encounter an error while scaling, read back the frequency tables
from the pcu.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-5-chris@chris-wilson.co.uk

drm/i915/selftests: Split RPS frequency measurement

Split the frequency measurement into two modes, so that we can judge the
impact of the llc setup on top of the pure CS frequency scaling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-4-chris@chris-wilson.co.uk

drm/i915/selftests: Check RPS controls

Check that the GPU does respond to our RPS frequency requests by setting
our desired frequency.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-3-chris@chris-wilson.co.uk

drm/i915/selftests: Skip energy consumption tests if not controlling freq

If we can not manipulate the frequency with RPS, then comparing min/max
power consumption is pointless / misleading. We will leave the warning
about not being able to control the frequency selection via RPS to other
tests so as not to confuse this more specialised check.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-2-chris@chris-wilson.co.uk

drm/i915/selftests: Verify frequency scaling with RPS

One of the core tenents of reclocking the GPU is that its throughput
scales with the clock frequency. We can observe this by incrementing a
loop counter on the GPU, and compare the different execution rates at
the notional RPS frequencies.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-1-chris@chris-wilson.co.uk

drm/i915: Push MST link retraining to the hotplug work

We shouldn't try to do link retraining from the short hpd handler.
We can't take any modeset locks there so this is racy as hell.
Push the whole thing into the hotplug work like we do with SST.

We'll just have to adjust the SST retraining code to deal with
the MST encoders and multiple pipes.

TODO: I have a feeling we should just rip this all out and
do a full modeset instead. Stuff like port sync and the tgl+
MST master transcoder stuff maybe doesn't work well if we
try to retrain without following the proper modeset sequence.
So far haven't done any actual tests to confirm that though.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/i915: Flatten intel_dp_check_mst_status() a bit

Make intel_dp_check_mst_status() somewhat legible by humans.

Note that the return value of drm_dp_mst_hpd_irq() is always
either 0 or -ENOMEM, and we never did anything with the latter
so we can just ignore the whole thing.

We can also get rid of the direct drm_dp_mst_topology_mgr_set_mst(false)
call since returning -EINVAL causes the caller to do the very same call
for us.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/i915: Pass encoder all the way to intel_ddi_transcoder_func_reg_val_get()

Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Push TRANS_DDI_FUNC_CTL into the encoder->enable() hook

Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable
is already there, and as a followup will enable us to pass the encoder
all the way down.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Move the TRANS_DDI_FUNC_CTL enable to a later point

No reason that I can see why we should enable TRANS_DDI_FUNC_CTL
before we set up the watermarks of configure the mbus stuff.
In fact reordering these seems to match the bspec sequence better,
and crucially will allow us to push the TRANS_DDI_FUNC_CTL enable
into the encoder enable hook as a followup.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Pass encoder to intel_ddi_enable_pipe_clock()

Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>

Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()

This was sort of annoying me:

random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47

This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().

Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/gt: Move the late flush_submission in retire to the end

Avoid flushing the submission queue (of others) under the client's
timeline lock, but instead move it to the end so that we may catch more.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1066
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-2-chris@chris-wilson.co.uk

drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane

Since moving the obj->vma.list to a spin_lock, and the vm->bound_list to
its vm->mutex, along with tracking shrinkable status under its own
spinlock, we no long require the object to be locked by the caller.

This is fortunate as it appears we can be called with the lock along an
error path in flipping:

<4> [139.942851] WARN_ON(debug_locks && !lock_is_held(&(&((obj)->base.resv)->lock.base)->dep_map))
<4> [139.943242] WARNING: CPU: 0 PID: 1203 at drivers/gpu/drm/i915/gem/i915_gem_domain.c:405 i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943263] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core r8169 lpc_ich snd_pcm realtek prime_numbers [last unloaded: i915]
<4> [139.943347] CPU: 0 PID: 1203 Comm: kms_flip Tainted: G     U            5.6.0-gd0fda5c2cf3f1-drmtip_474+ #1
<4> [139.943363] Hardware name:  /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<4> [139.943589] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943589] Code: 85 28 01 00 00 be ff ff ff ff 48 8d 78 60 e8 d7 9b f0 e2 85 c0 75 b9 48 c7 c6 50 b9 38 c0 48 c7 c7 e9 48 3c c0 e8 20 d4 e9 e2 <0f> 0b eb a2 48 c7 c1 08 bb 38 c0 ba 0a 01 00 00 48 c7 c6 88 a3 35
<4> [139.943589] RSP: 0018:ffffb774c0603b48 EFLAGS: 00010282
<4> [139.943589] RAX: 0000000000000000 RBX: ffff9a142fa36e80 RCX: 0000000000000006
<4> [139.943589] RDX: 000000000000160d RSI: ffff9a142c1a88f8 RDI: ffffffffa434a64d
<4> [139.943589] RBP: ffff9a1410a513c0 R08: ffff9a142c1a88f8 R09: 0000000000000000
<4> [139.943589] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9a1436ee94b8
<4> [139.943589] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff9a1410960000
<4> [139.943589] FS:  00007fc73a744e40(0000) GS:ffff9a143da00000(0000) knlGS:0000000000000000
<4> [139.943589] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [139.943589] CR2: 00007fc73997e098 CR3: 000000002f5fe000 CR4: 00000000000006f0
<4> [139.943589] Call Trace:
<4> [139.943589]  intel_pin_and_fence_fb_obj+0x1c9/0x1f0 [i915]
<4> [139.943589]  intel_plane_pin_fb+0x3f/0xd0 [i915]
<4> [139.943589]  intel_prepare_plane_fb+0x13b/0x5c0 [i915]
<4> [139.943589]  drm_atomic_helper_prepare_planes+0x85/0x110
<4> [139.943589]  intel_atomic_commit+0xda/0x390 [i915]
<4> [139.943589]  drm_atomic_helper_page_flip+0x9c/0xd0
<4> [139.943589]  ? drm_event_reserve_init+0x46/0x60
<4> [139.943589]  drm_mode_page_flip_ioctl+0x587/0x5d0

This completes the symmetry lost in commit 8b1c78e06e61 ("drm/i915: Avoid
calling i915_gem_object_unbind holding object lock").

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1743
Fixes: 8b1c78e06e61 ("drm/i915: Avoid calling i915_gem_object_unbind holding object lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-1-chris@chris-wilson.co.uk

drm/i915/dpcd_bl: Unbreak enable_dpcd_backlight modparam

Looks like I accidentally made it so you couldn't force DPCD backlight
support on, whoops. Fix that.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 17f5d57915be ("drm/i915: Force DPCD backlight mode on X1 Extreme 2nd Gen 4K AMOLED panel")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413214407.1851002-1-lyude@redhat.com

drm/i915/audio: error log non-zero audio power refcount after unbind

We have some module unload/reload tests hitting an issue with i915
unbinding the component interface before the audio driver has properly
put the power. Log an error about it for ease of debugging. (Normally
this leads to a wakeref debug splat on the power well.)

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417065132.23048-1-jani.nikula@intel.com

drm/i915: fix Sphinx build duplicate label warning

Fix the warning caused by enabling the autosectionlabel extension in the
kernel Sphinx build:

Documentation/gpu/i915.rst:610: WARNING: duplicate label
gpu/i915:layout, other instance in Documentation/gpu/i915.rst

The autosectionlabel extension adds labels to each section title for
cross-referencing, but forbids identical section titles in a
document. With kernel-doc, this includes sections titles in the included
kernel-doc comments.

In the warning message, Sphinx is unable to reference the labels in
their true locations in the kernel-doc comments in source. In this case,
there's "Layout" sections in both gt/intel_workarounds.c and
i915_reg.h. Rename the section in the latter to "File Layout".

Fixes: 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417130109.12791-1-jani.nikula@intel.com

drm/i915: Refactor setting dma info to a common helper

DMA_MASK bit values are different for different generations.

This will become more difficult to manage over time with the open
coded usage of different versions of the device.

Fix by:
  disallow setting of dma mask in AGP path (< GEN(5) for i915,
  add dma_mask_size to the device info configuration,
  updating open code call sequence to the latest interface,
  refactoring into a common function for setting the dma segment
  and mask info

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
cc: Brian Welty <brian.welty@intel.com>
cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417195107.68732-1-michael.j.ruhl@intel.com

drm/i915: remove redundant assignment to variable test_result

The variable test_result is being initialized with a value that is
never read and it is being updated later with a new value.  The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417160829.112776-1-colin.king@canonical.com

drm/i915: Add ICL PG3 PW ID for EHL

Gen11 onwards PG3 contains functions for pipe B,
external displays, and VGA. Add missing ICL_DISP_PW_3
for ehl_power_wells.

Cc: Animesh Manna <animesh.manna@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1737
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417172835.15461-1-anshuman.gupta@intel.com

drm/i915/display: Load DP_TP_CTL/STATUS offset before use it

Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.

So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.

In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.

So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.

Fixes: 4444df6e205b ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com

drm/i915/tc: Do not warn when aux power well of static TC ports timeout

This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.

v3:
- moved checks to tc_phy_aux_timeout_expected()

v4:
- moved and add comments to tc_phy_aux_timeout_expected()

v5:
- only checking tc_legacy_port for TC ports

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com

drm/i915/tc: Catch TC users accessing FIA registers without enable aux

As described in "drm/i915/tc/icl: Implement TC cold sequences" users
of TC functions should held aux power well during access to avoid
read garbage due HW in TC cold state.

v3:
- renamed is_tc_cold_blocked() to assert_tc_cold_blocked()
- restored the removed 0xffffffff checks

Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-7-jose.souza@intel.com

drm/i915/tc/tgl: Implement TC cold sequences

TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.

For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.

So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.

v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS

v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN

v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error

v5:
- only sleeping 1msec when ret is -EAGAIN

BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com

drm/i915/tc: Skip ref held check for TC legacy aux power wells

As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com

drm/i915/tc/icl: Implement TC cold sequences

This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.

Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.

So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.

The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.

Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.

v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access

v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN

v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future

BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com

drm/i915/display: Split hsw_power_well_enable() into two

This is a preparation for ICL TC cold exit sequences.

v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com