git.samba.org - sfrench/cifs-2.6.git/log

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"The main change is that we are reverting blanket enablement of SMBus
  mode for devices with Elan touchpads that report BIOS release date as
  2018+ because there are older boxes with updated BIOSes that still do
  not work well in SMbus mode.

  We will have to establish whitelist for SMBus mode it looks like"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: elantech - enable SMBus on new (2018+) systems"
  Input: synaptics-rmi4 - avoid processing unknown IRQs
  Input: soc_button_array - partial revert of support for newer surface devices
  Input: goodix - add support for 9-bytes reports
  Input: da9063 - fix capability and drop KEY_SLEEP

coccinelle: api/devm_platform_ioremap_resource: remove useless script

While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:

https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/

Remove the script to reduce the spam.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver fixes from Andy Shevchenko:

- Users of Intel P-Unit IPC driver might be surprised by harmless
   warning. Thus, switch to API which doesn't issue a warning at all.

- I²C multi-instantiate driver continues to add slave devices even when
   IRQ resource is not found. For devices in the market IRQ resource is
   mandatory, so, fail the ->probe() of the parent driver to avoid
   slaves being probed.

- Avoid compiler warning due to unused variable in Classmate laptop
   driver.

* tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: i2c-multi-instantiate: Fail the probe if no IRQ provided
  platform/x86: intel_punit_ipc: Avoid error message when retrieving IRQ
  platform/x86: classmate-laptop: remove unused variable

Merge tag 'gpio-v5.4-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"The fixes pertain to a problem with initializing the Intel GPIO
  irqchips when adding gpiochips.

  Andy fixed it up elegantly by adding a hardware initialization
  callback to the struct gpio_irq_chip so let's use this. Tested and
  verified on the target hardware"

* tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: lynxpoint: set default handler to be handle_bad_irq()
  gpio: merrifield: Move hardware initialization to callback
  gpio: lynxpoint: Move hardware initialization to callback
  gpio: intel-mid: Move hardware initialization to callback
  gpiolib: Initialize the hardware with a callback
  gpio: merrifield: Restore use of irq_base

kthread: make __kthread_queue_delayed_work static

The __kthread_queue_delayed_work is not exported so
make it static, to avoid the following sparse warning:

kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "Input: elantech - enable SMBus on new (2018+) systems"

This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.

Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.

So let's revert this patch.

There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/test: stop device before reset
  tools/virtio: xen stub
  tools/virtio: more stubs

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
  (qla2xxx) and two in the core.

  The last two are mostly about removing incorrect messages from the
  kernel log: the resid message is definitely wrong and the sync cache
  on protected drive problem is arguably wrong"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Update qla2xxx driver
  scsi: zfcp: fix reaction on bit error threshold notification
  scsi: core: save/restore command resid for error handling
  scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
  scsi: sd: Ignore a failure to sync cache due to lack of authorization

sparc64: disable fast-GUP due to unexplained oopses

HAVE_FAST_GUP enables the lockless quick page table walker for simple
cases, and is a nice optimization for some random loads that can then
use get_user_pages_fast() rather than the more careful page walker.

However, for some unexplained reason, it seems to be subtly broken on
sparc64.  The breakage is only with some compiler versions and some
hardware, and nobody seems to have figured out what triggers it,
although there's a simple reprodicer for the problem when it does
trigger.

The problem was introduced with the conversion to the generic GUP code
in commit 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast
code"), but nothing looks obviously wrong in that conversion.  It may be
a compiler bug that just hits us with the code reorganization.  Or it
may be something very specific to sparc64.

This disables HAVE_FAST_GUP entirely.  That makes things like futexes a
bit slower, but at least they work.  If we can figure out the trigger,
that would be lovely, but it's been three months already..

Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/
Fixes: 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code")
Reported-by: Dmitry V Levin <ldv@altlinux.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Requested-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'parisc-5.4-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

- Fix a parisc-specific fallout of Christoph's
   dma_set_mask_and_coherent() patches (Sven)

- Fix a vmap memory leak in ioremap()/ioremap() (Helge)

- Some minor cleanups and documentation updates (Nick, Helge)

* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Remove 32-bit DMA enforcement from sba_iommu
  parisc: Fix vmap memory leak in ioremap()/iounmap()
  parisc: prefer __section from compiler_attributes.h
  parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
  MAINTAINERS: Add hp_sdc drivers to parisc arch

Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging

Pull dmi fix from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices

Merge branch 'akpm' (patches from Andrew)

Merge more fixes from Andrew Morton:
"The usual shower of hotfixes and some followups to the recently merged
  page_owner enhancements"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once
  mm/slab.c: fix kernel-doc warning for __ksize()
  xarray.h: fix kernel-doc warning
  bitmap.h: fix kernel-doc warning and typo
  fs/fs-writeback.c: fix kernel-doc warning
  fs/libfs.c: fix kernel-doc warning
  fs/direct-io.c: fix kernel-doc warning
  mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()
  mm, hugetlb: allow hugepage allocations to reclaim as needed
  lib/test_meminit: add a kmem_cache_alloc_bulk() test
  mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
  lib/generic-radix-tree.c: add kmemleak annotations
  mm/slub: fix a deadlock in show_slab_objects()
  mm, page_owner: rename flag indicating that page is allocated
  mm, page_owner: decouple freeing stack trace from debug_pagealloc
  mm, page_owner: fix off-by-one error in __set_page_owner_handle()

gpio: lynxpoint: set default handler to be handle_bad_irq()

We switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: merrifield: Move hardware initialization to callback

The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.

Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: lynxpoint: Move hardware initialization to callback

The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.

Fixes: 7b1e889436a1 ("gpio: lynxpoint: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: intel-mid: Move hardware initialization to callback

The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.

Fixes: 8069e69a9792 ("gpio: intel-mid: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpiolib: Initialize the hardware with a callback

After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.

Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.

This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: merrifield: Restore use of irq_base

During conversion to internal IRQ chip initialization the commit
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
lost the irq_base assignment.

drivers/gpio/gpio-merrifield.c: In function ‘mrfld_gpio_probe’:
drivers/gpio/gpio-merrifield.c:405:17: warning: variable ‘irq_base’ set but not used [-Wunused-but-set-variable]

Assign the girq->first to it.

Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once

Mmap /dev/dax more than once, then read the poison location using
address from one of the mappings.  The other mappings due to not having
the page mapped in will cause SIGKILLs delivered to the process.
SIGKILL succeeds over SIGBUS, so user process loses the opportunity to
handle the UE.

Although one may add MAP_POPULATE to mmap(2) to work around the issue,
MAP_POPULATE makes mapping 128GB of pmem several magnitudes slower, so
isn't always an option.

Details -

  ndctl inject-error --block=10 --count=1 namespace6.0

  ./read_poison -x dax6.0 -o 5120 -m 2
  mmaped address 0x7f5bb6600000
  mmaped address 0x7f3cf3600000
  doing local read at address 0x7f3cf3601400
  Killed

Console messages in instrumented kernel -

  mce: Uncorrected hardware memory error in user-access at edbe201400
  Memory failure: tk->addr = 7f5bb6601000
  Memory failure: address edbe201: call dev_pagemap_mapping_shift
  dev_pagemap_mapping_shift: page edbe201: no PUD
  Memory failure: tk->size_shift == 0
  Memory failure: Unable to find user space address edbe201 in read_poison
  Memory failure: tk->addr = 7f3cf3601000
  Memory failure: address edbe201: call dev_pagemap_mapping_shift
  Memory failure: tk->size_shift = 21
  Memory failure: 0xedbe201: forcibly killing read_poison:22434 because of failure to unmap corrupted page
    => to deliver SIGKILL
  Memory failure: 0xedbe201: Killing read_poison:22434 due to hardware memory corruption
    => to deliver SIGBUS

Link: http://lkml.kernel.org/r/1565112345-28754-3-git-send-email-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab.c: fix kernel-doc warning for __ksize()

Fix kernel-doc warning in mm/slab.c:

mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'

Also add Return: documentation section for this function.

Link: http://lkml.kernel.org/r/68c9fd7d-f09e-d376-e292-c7b2bdf1774d@infradead.org
Fixes: 10d1f8cb3965 ("mm/slab: refactor common ksize KASAN logic into slab_common.c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xarray.h: fix kernel-doc warning

Fix (Sphinx) kernel-doc warning in <linux/xarray.h>:

include/linux/xarray.h:232: WARNING: Unexpected indentation.

Link: http://lkml.kernel.org/r/89ba2134-ce23-7c10-5ee1-ef83b35aa984@infradead.org
Fixes: a3e4d3f97ec8 ("XArray: Redesign xa_alloc API")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitmap.h: fix kernel-doc warning and typo

Fix kernel-doc warning in <linux/bitmap.h>:

include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'

Also fix small typo (bitnaps).

Link: http://lkml.kernel.org/r/0729ea7a-2c0d-b2c5-7dd3-3629ee0803e2@infradead.org
Fixes: b9fa6442f704 ("cpumask: Implement cpumask_or_equal()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/fs-writeback.c: fix kernel-doc warning

Fix kernel-doc warning in fs/fs-writeback.c:

fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id'

Link: http://lkml.kernel.org/r/756645ac-0ce8-d47e-d30a-04d9e4923a4f@infradead.org
Fixes: d62241c7a406 ("writeback, memcg: Implement cgroup_writeback_by_id()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/libfs.c: fix kernel-doc warning

Fix kernel-doc warning in fs/libfs.c:

fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'

Link: http://lkml.kernel.org/r/5fc9d70b-e377-0ec9-066a-970d49579041@infradead.org
Fixes: ad2a722f196d ("libfs: Open code simple_commit_write into only user")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Boaz Harrosh <boazh@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/direct-io.c: fix kernel-doc warning

Fix kernel-doc warning in fs/direct-io.c:

fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'

Also, don't mark this function as having kernel-doc notation since it is
not exported.

Link: http://lkml.kernel.org/r/97908511-4328-4a56-17fe-f43a1d7aa470@infradead.org
Fixes: 6d544bb4d901 ("dio: centralize completion in dio_complete()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zach Brown <zab@zabbo.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()

Florian and Dave reported [1] a NULL pointer dereference in
__reset_isolation_pfn().  While the exact cause is unclear, staring at
the code revealed two bugs, which might be related.

One bug is that if zone starts in the middle of pageblock, block_page
might correspond to different pfn than block_pfn, and then the
pfn_valid_within() checks will check different pfn's than those accessed
via struct page.  This might result in acessing an unitialized page in
CONFIG_HOLES_IN_ZONE configs.

The other bug is that end_page refers to the first page of next
pageblock and not last page of current pageblock.  The online and valid
check is then wrong and with sections, the while (page < end_page) loop
might wander off actual struct page arrays.

[1] https://lore.kernel.org/linux-xfs/87o8z1fvqu.fsf@mid.deneb.enyo.de/

Link: http://lkml.kernel.org/r/20191008152915.24704-1-vbabka@suse.cz
Fixes: 6b0868c820ff ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Florian Weimer <fw@deneb.enyo.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, hugetlb: allow hugepage allocations to reclaim as needed

Commit b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when
compaction may not succeed") has chnaged the allocator to bail out from
the allocator early to prevent from a potentially excessive memory
reclaim.  __GFP_RETRY_MAYFAIL is designed to retry the allocation,
reclaim and compaction loop as long as there is a reasonable chance to
make forward progress.  Neither COMPACT_SKIPPED nor COMPACT_DEFERRED at
the INIT_COMPACT_PRIORITY compaction attempt gives this feedback.

The most obvious affected subsystem is hugetlbfs which allocates huge
pages based on an admin request (or via admin configured overcommit).  I
have done a simple test which tries to allocate half of the memory for
hugetlb pages while the memory is full of a clean page cache.  This is
not an unusual situation because we try to cache as much of the memory
as possible and sysctl/sysfs interface to allocate huge pages is there
for flexibility to allocate hugetlb pages at any time.

System has 1GB of RAM and we are requesting 515MB worth of hugetlb pages
after the memory is prefilled by a clean page cache:

  root@test1:~# cat hugetlb_test.sh

  set -x
  echo 0 > /proc/sys/vm/nr_hugepages
  echo 3 > /proc/sys/vm/drop_caches
  echo 1 > /proc/sys/vm/compact_memory
  dd if=/mnt/data/file-1G of=/dev/null bs=$((4<<10))
  TS=$(date +%s)
  echo 256 > /proc/sys/vm/nr_hugepages
  cat /proc/sys/vm/nr_hugepages

The results for 2 consecutive runs on clean 5.3

  root@test1:~# sh hugetlb_test.sh
  + echo 0
  + echo 3
  + echo 1
  + dd if=/mnt/data/file-1G of=/dev/null bs=4096
  262144+0 records in
  262144+0 records out
  1073741824 bytes (1.1 GB) copied, 21.0694 s, 51.0 MB/s
  + date +%s
  + TS=1569905284
  + echo 256
  + cat /proc/sys/vm/nr_hugepages
  256
  root@test1:~# sh hugetlb_test.sh
  + echo 0
  + echo 3
  + echo 1
  + dd if=/mnt/data/file-1G of=/dev/null bs=4096
  262144+0 records in
  262144+0 records out
  1073741824 bytes (1.1 GB) copied, 21.7548 s, 49.4 MB/s
  + date +%s
  + TS=1569905311
  + echo 256
  + cat /proc/sys/vm/nr_hugepages
  256

Now with b39d0ee2632d applied

  root@test1:~# sh hugetlb_test.sh
  + echo 0
  + echo 3
  + echo 1
  + dd if=/mnt/data/file-1G of=/dev/null bs=4096
  262144+0 records in
  262144+0 records out
  1073741824 bytes (1.1 GB) copied, 20.1815 s, 53.2 MB/s
  + date +%s
  + TS=1569905516
  + echo 256
  + cat /proc/sys/vm/nr_hugepages
  11
  root@test1:~# sh hugetlb_test.sh
  + echo 0
  + echo 3
  + echo 1
  + dd if=/mnt/data/file-1G of=/dev/null bs=4096
  262144+0 records in
  262144+0 records out
  1073741824 bytes (1.1 GB) copied, 21.9485 s, 48.9 MB/s
  + date +%s
  + TS=1569905541
  + echo 256
  + cat /proc/sys/vm/nr_hugepages
  12

The success rate went down by factor of 20!

Although hugetlb allocation requests might fail and it is reasonable to
expect them to under extremely fragmented memory or when the memory is
under a heavy pressure but the above situation is not that case.

Fix the regression by reverting back to the previous behavior for
__GFP_RETRY_MAYFAIL requests and disable the beail out heuristic for
those requests.

Mike said:

: hugetlbfs allocations are commonly done via sysctl/sysfs shortly after
: boot where this may not be as much of an issue.  However, I am aware of at
: least three use cases where allocations are made after the system has been
: up and running for quite some time:
:
: - DB reconfiguration.  If sysctl/sysfs fails to get required number of
:   huge pages, system is rebooted to perform allocation after boot.
:
: - VM provisioning.  If unable get required number of huge pages, fall
:   back to base pages.
:
: - An application that does not preallocate pool, but rather allocates
:   pages at fault time for optimal NUMA locality.
:
: In all cases, I would expect b39d0ee2632d to cause regressions and
: noticable behavior changes.
:
: My quick/limited testing in
: https://lkml.kernel.org/r/3468b605-a3a9-6978-9699-57c52a90bd7e@oracle.com
: was insufficient.  It was also mentioned that if something like
: b39d0ee2632d went forward, I would like exemptions for __GFP_RETRY_MAYFAIL
: requests as in this patch.

[mhocko@suse.com: reworded changelog]
Link: http://lkml.kernel.org/r/20191007075548.12456-1-mhocko@kernel.org
Fixes: b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_meminit: add a kmem_cache_alloc_bulk() test

Make sure allocations from kmem_cache_alloc_bulk() and
kmem_cache_free_bulk() are properly initialized.

Link: http://lkml.kernel.org/r/20191007091605.30530-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations

slab_alloc_node() already zeroed out the freelist pointer if
init_on_free was on. Thibaut Sautereau noticed that the same needs to
be done for kmem_cache_alloc_bulk(), which performs the allocations
separately.

kmem_cache_alloc_bulk() is currently used in two places in the kernel,
so this change is unlikely to have a major performance impact.

SLAB doesn't require a similar change, as auto-initialization makes the
allocator store the freelist pointers off-slab.

Link: http://lkml.kernel.org/r/20191007091605.30530-1-glider@google.com
Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Thibaut Sautereau <thibaut@sautereau.fr>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/generic-radix-tree.c: add kmemleak annotations

Kmemleak is falsely reporting a leak of the slab allocation in
sctp_stream_init_ext():

  BUG: memory leak
  unreferenced object 0xffff8881114f5d80 (size 96):
   comm "syz-executor934", pid 7160, jiffies 4294993058 (age 31.950s)
   hex dump (first 32 bytes):
     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   backtrace:
     [<00000000ce7a1326>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
     [<00000000ce7a1326>] slab_post_alloc_hook mm/slab.h:439 [inline]
     [<00000000ce7a1326>] slab_alloc mm/slab.c:3326 [inline]
     [<00000000ce7a1326>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
     [<000000007abb7ac9>] kmalloc include/linux/slab.h:547 [inline]
     [<000000007abb7ac9>] kzalloc include/linux/slab.h:742 [inline]
     [<000000007abb7ac9>] sctp_stream_init_ext+0x2b/0xa0  net/sctp/stream.c:157
     [<0000000048ecb9c1>] sctp_sendmsg_to_asoc+0x946/0xa00  net/sctp/socket.c:1882
     [<000000004483ca2b>] sctp_sendmsg+0x2a8/0x990 net/sctp/socket.c:2102
     [...]

But it's freed later.  Kmemleak misses the allocation because its
pointer is stored in the generic radix tree sctp_stream::out, and the
generic radix tree uses raw pages which aren't tracked by kmemleak.

Fix this by adding the kmemleak hooks to the generic radix tree code.

Link: http://lkml.kernel.org/r/20191004065039.727564-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: <syzbot+7f3b6b106be8dcdcdeec@syzkaller.appspotmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub: fix a deadlock in show_slab_objects()

A long time ago we fixed a similar deadlock in show_slab_objects() [1].
However, it is apparently due to the commits like 01fb58bcba63 ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation
path") and 03afc0e25f7f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by
just reading files in /sys/kernel/slab which will generate a lockdep
splat below.

Since the "mem_hotplug_lock" here is only to obtain a stable online node
mask while racing with NUMA node hotplug, in the worst case, the results
may me miscalculated while doing NUMA node hotplug, but they shall be
corrected by later reads of the same files.

  WARNING: possible circular locking dependency detected
  ------------------------------------------------------
  cat/5224 is trying to acquire lock:
  ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
  show_slab_objects+0x94/0x3a8

  but task is already holding lock:
  b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (kn->count#45){++++}:
         lock_acquire+0x31c/0x360
         __kernfs_remove+0x290/0x490
         kernfs_remove+0x30/0x44
         sysfs_remove_dir+0x70/0x88
         kobject_del+0x50/0xb0
         sysfs_slab_unlink+0x2c/0x38
         shutdown_cache+0xa0/0xf0
         kmemcg_cache_shutdown_fn+0x1c/0x34
         kmemcg_workfn+0x44/0x64
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

  -> #1 (slab_mutex){+.+.}:
         lock_acquire+0x31c/0x360
         __mutex_lock_common+0x16c/0xf78
         mutex_lock_nested+0x40/0x50
         memcg_create_kmem_cache+0x38/0x16c
         memcg_kmem_cache_create_func+0x3c/0x70
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

  -> #0 (mem_hotplug_lock.rw_sem){++++}:
         validate_chain+0xd10/0x2bcc
         __lock_acquire+0x7f4/0xb8c
         lock_acquire+0x31c/0x360
         get_online_mems+0x54/0x150
         show_slab_objects+0x94/0x3a8
         total_objects_show+0x28/0x34
         slab_attr_show+0x38/0x54
         sysfs_kf_seq_show+0x198/0x2d4
         kernfs_seq_show+0xa4/0xcc
         seq_read+0x30c/0x8a8
         kernfs_fop_read+0xa8/0x314
         __vfs_read+0x88/0x20c
         vfs_read+0xd8/0x10c
         ksys_read+0xb0/0x120
         __arm64_sys_read+0x54/0x88
         el0_svc_handler+0x170/0x240
         el0_svc+0x8/0xc

  other info that might help us debug this:

  Chain exists of:
    mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(kn->count#45);
                                 lock(slab_mutex);
                                 lock(kn->count#45);
    lock(mem_hotplug_lock.rw_sem);

   *** DEADLOCK ***

  3 locks held by cat/5224:
   #0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8
   #1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0
   #2: b8ff009693eee398 (kn->count#45){++++}, at:
  kernfs_seq_start+0x44/0xf0

  stack backtrace:
  Call trace:
   dump_backtrace+0x0/0x248
   show_stack+0x20/0x2c
   dump_stack+0xd0/0x140
   print_circular_bug+0x368/0x380
   check_noncircular+0x248/0x250
   validate_chain+0xd10/0x2bcc
   __lock_acquire+0x7f4/0xb8c
   lock_acquire+0x31c/0x360
   get_online_mems+0x54/0x150
   show_slab_objects+0x94/0x3a8
   total_objects_show+0x28/0x34
   slab_attr_show+0x38/0x54
   sysfs_kf_seq_show+0x198/0x2d4
   kernfs_seq_show+0xa4/0xcc
   seq_read+0x30c/0x8a8
   kernfs_fop_read+0xa8/0x314
   __vfs_read+0x88/0x20c
   vfs_read+0xd8/0x10c
   ksys_read+0xb0/0x120
   __arm64_sys_read+0x54/0x88
   el0_svc_handler+0x170/0x240
   el0_svc+0x8/0xc

I think it is important to mention that this doesn't expose the
show_slab_objects to use-after-free.  There is only a single path that
might really race here and that is the slab hotplug notifier callback
__kmem_cache_shrink (via slab_mem_going_offline_callback) but that path
doesn't really destroy kmem_cache_node data structures.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html

[akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock]
Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw
Fixes: 01fb58bcba63 ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes: 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_owner: rename flag indicating that page is allocated

Commit 37389167a281 ("mm, page_owner: keep owner info when freeing the
page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page
is tracked as being allocated. Kirril suggested naming it
PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat
loaded term for a page".

Link: http://lkml.kernel.org/r/20190930122916.14969-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_owner: decouple freeing stack trace from debug_pagealloc

Commit 8974558f49a6 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack
trace, when debug_pagealloc is also enabled.  KASAN would also like to
do this [1] to improve error reports to debug e.g. UAF issues.

Kirill has suggested that the freeing stack trace saving should be also
possible to be enabled separately from KASAN or debug_pagealloc, i.e.
with an extra boot option.  Qian argued that we have enough options
already, and avoiding the extra overhead is not worth the complications
in the case of a debugging option.  Kirill noted that the extra stack
handle in struct page_owner requires 0.1% of memory.

This patch therefore enables free stack saving whenever page_owner is
enabled, regardless of whether debug_pagealloc or KASAN is also enabled.
KASAN kernels booted with page_owner=on will thus benefit from the
improved error reports.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967

[vbabka@suse.cz: v3]
Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Qian Cai <cai@lca.pw>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_owner: fix off-by-one error in __set_page_owner_handle()

Patch series "followups to debug_pagealloc improvements through
page_owner", v3.

These are followups to [1] which made it to Linus meanwhile.  Patches 1
and 3 are based on Kirill's review, patch 2 on KASAN request [2].  It
would be nice if all of this made it to 5.4 with [1] already there (or
at least Patch 1).

This patch (of 3):

As noted by Kirill, commit 7e2f2a0cd17c ("mm, page_owner: record page
owner for each subpage") has introduced an off-by-one error in
__set_page_owner_handle() when looking up page_ext for subpages.  As a
result, the head page page_owner info is set twice, while for the last
tail page, it's not set at all.

Fix this and also make the code more efficient by advancing the page_ext
pointer we already have, instead of calling lookup_page_ext() for each
subpage.  Since the full size of struct page_ext is not known at compile
time, we can't use a simple page_ext++ statement, so introduce a
page_ext_next() inline function for that.

Link: http://lkml.kernel.org/r/20190930122916.14969-2-vbabka@suse.cz
Fixes: 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Reported-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parisc: Remove 32-bit DMA enforcement from sba_iommu

This breaks booting from sata_sil24 with the recent DMA change.
According to James Bottomley this was in to improve performance by
kicking the device into 32 bit descriptors, which are usually more
efficient, especially with older dual descriptor format cards like we
have on parisc systems.
Remove it for now to make DMA working again.

Fixes: dcc02c19cc06 ("sata_sil24: use dma_set_mask_and_coherent")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Fix vmap memory leak in ioremap()/iounmap()

Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size

It seems we missed calling vunmap() in iounmap().

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+

parisc: prefer __section from compiler_attributes.h

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define

Signed-off-by: Helge Deller <deller@gmx.de>

firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices

Before reading the Extended Size field, we should ensure it fits in
the DMI record. There is already a record length check but it does
not cover that field.

It would take a seriously corrupted DMI table to hit that bug, so no
need to worry, but we should still fix it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6deae96b42eb ("firmware, DMI: Add function to look up a handle and return DIMM size")
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@suse.de>

kmemleak: Do not corrupt the object_list during clean-up

In case of an error (e.g. memory pool too small), kmemleak disables
itself and cleans up the already allocated metadata objects. However, if
this happens early before the RCU callback mechanism is available,
put_object() skips call_rcu() and frees the object directly. This is not
safe with the RCU list traversal in __kmemleak_do_cleanup().

Change the list traversal in __kmemleak_do_cleanup() to
list_for_each_entry_safe() and remove the rcu_read_{lock,unlock} since
the kmemleak is already disabled at this point. In addition, avoid an
unnecessary metadata object rb-tree look-up since it already has the
struct kmemleak_object pointer.

Fixes: c5665868183f ("mm: kmemleak: use the memory pool for early allocations")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

platform/x86: i2c-multi-instantiate: Fail the probe if no IRQ provided

For APIC case of interrupt we don't fail a ->probe() of the driver,
which makes kernel to print a lot of warnings from the children.

We have two options here:
- switch to platform_get_irq_optional(), though it won't stop children
to be probed and failed
- fail the ->probe() of i2c-multi-instantiate

Since the in reality we never had devices in the wild where IRQ resource
is optional, the latter solution suits the best.

Fixes: 799d3379a672 ("platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Linux 5.4-rc3

Merge tag 'trace-v5.4-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:

   - Remove lockdown from tracefs itself and moved it to the trace
     directory. Have the open functions there do the lockdown checks.

   - Fix a few races with opening an instance file and the instance
     being deleted (Discovered during the lockdown updates). Kept
     separate from the clean up code such that they can be backported to
     stable easier.

   - Clean up and consolidated the checks done when opening a trace
     file, as there were multiple checks that need to be done, and it
     did not make sense having them done in each open instance.

   - Fix a regression in the record mcount code.

   - Small hw_lat detector tracer fixes.

   - A trace_pipe read fix due to not initializing trace_seq"

* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
  tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
  tracing/hwlat: Report total time spent in all NMIs during the sample
  recordmcount: Fix nop_mcount() function
  tracing: Do not create tracefs files if tracefs lockdown is in effect
  tracing: Add locked_down checks to the open calls of files created for tracefs
  tracing: Add tracing_check_open_get_tr()
  tracing: Have trace events system open call tracing_open_generic_tr()
  tracing: Get trace_array reference for available_tracers files
  ftrace: Get a reference counter for the trace_array on filter files
  tracefs: Revert ccbd54ff54e8 ("tracefs: Restrict tracefs when the kernel is locked down")

Merge tag 'hwmon-for-v5.4-rc3' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- Update/fix inspur-ipsps1 and k10temp Documentation

- Fix nct7904 driver

- Fix HWMON_P_MIN_ALARM mask in hwmon core

* tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: docs: Extend inspur-ipsps1 title underline
  hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct.
  docs: hwmon: Include 'inspur-ipsps1.rst' into docs
  hwmon: Fix HWMON_P_MIN_ALARM mask
  hwmon: (k10temp) Update documentation and add temp2_input info
  hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct

Merge tag 'fixes-for-5.4-rc3' of git://git./linux/kernel/git/mtd/linux

Pull MTD fixes from Richard Weinberger:
"Two fixes for MTD:

   - spi-nor: Fix for a regression in write_sr()

   - rawnand: Regression fix for the au1550nd driver"

* tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: au1550nd: Fix au_read_buf16() prototype
  mtd: spi-nor: Fix direction of the write_sr() transfer

Merge tag 'for-linus-20191012' of git://git.kernel.dk/linux-block

Pull io_uring fix from Jens Axboe:
"Single small fix for a regression in the sequence logic for linked
commands"

* tag 'for-linus-20191012' of git://git.kernel.dk/linux-block:
io_uring: fix sequence logic for timeout requests

vhost/test: stop device before reset

When device stop was moved out of reset, test device wasn't updated to
stop before reset, this resulted in a use after free. Fix by invoking
stop appropriately.

Fixes: b211616d7125 ("vhost: move -net specific code out")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: xen stub

Fixes test module build.

Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tracing: Initialize iter->seq after zeroing in tracing_read_pipe()

A customer reported the following softlockup:

[899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464]
[899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] Kernel panic - not syncing: softlockup: hung tasks
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12
[899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000
[899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00
[899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000
[899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8
[899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000
[899688.160002]  tracing_read_pipe+0x336/0x3c0
[899688.160002]  __vfs_read+0x26/0x140
[899688.160002]  vfs_read+0x87/0x130
[899688.160002]  SyS_read+0x42/0x90
[899688.160002]  do_syscall_64+0x74/0x160

It caught the process in the middle of trace_access_unlock(). There is
no loop. So, it must be looping in the caller tracing_read_pipe()
via the "waitagain" label.

Crashdump analyze uncovered that iter->seq was completely zeroed
at this point, including iter->seq.seq.size. It means that
print_trace_line() was never able to print anything and
there was no forward progress.

The culprit seems to be in the code:

/* reset all but tr, trace, and overruns */
memset(&iter->seq, 0,
       sizeof(struct trace_iterator) -
       offsetof(struct trace_iterator, seq));

It was added by the commit 53d0aa773053ab182877 ("ftrace:
add logic to record overruns"). It was v2.6.27-rc1.
It was the time when iter->seq looked like:

     struct trace_seq {
unsigned char buffer[PAGE_SIZE];
unsigned int len;
     };

There was no "size" variable and zeroing was perfectly fine.

The solution is to reinitialize the structure after or without
zeroing.

Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency

max_latency is intended to record the maximum ever observed hardware
latency, which may occur in either part of the loop (inner/outer). So
we need to also consider the outer-loop sample when updating
max_latency.

Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu
Fixes: e7c15cd8a113 ("tracing: Added hardware latency tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/hwlat: Report total time spent in all NMIs during the sample

nmi_total_ts is supposed to record the total time spent in *all* NMIs
that occur on the given CPU during the (active portion of the)
sampling window. However, the code seems to be overwriting this
variable for each NMI, thereby only recording the time spent in the
most recent NMI. Fix it by accumulating the duration instead.

Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu
Fixes: 7b2c86250122 ("tracing: Add NMI tracing in hwlat detector")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

recordmcount: Fix nop_mcount() function

The removal of the longjmp code in recordmcount.c mistakenly made the return
of make_nop() being negative an exit of nop_mcount(). It should not exit the
routine, but instead just not process that part of the code. By exiting with
an error code, it would cause the update of recordmcount to fail some files
which would fail the build if ftrace function tracing was enabled.

Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.home
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3f1df12019f3 ("recordmcount: Rewrite error/success handling")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Do not create tracefs files if tracefs lockdown is in effect

If on boot up, lockdown is activated for tracefs, don't even bother creating
the files. This can also prevent instances from being created if lockdown is
in effect.

Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add locked_down checks to the open calls of files created for tracefs

Added various checks on open tracefs calls to see if tracefs is in lockdown
mode, and if so, to return -EPERM.

Note, the event format files (which are basically standard on all machines)
as well as the enabled_functions file (which shows what is currently being
traced) are not lockde down. Perhaps they should be, but it seems counter
intuitive to lockdown information to help you know if the system has been
modified.

Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add tracing_check_open_get_tr()

Currently, most files in the tracefs directory test if tracing_disabled is
set. If so, it should return -ENODEV. The tracing_disabled is called when
tracing is found to be broken. Originally it was done in case the ring
buffer was found to be corrupted, and we wanted to prevent reading it from
crashing the kernel. But it's also called if a tracing selftest fails on
boot. It's a one way switch. That is, once it is triggered, tracing is
disabled until reboot.

As most tracefs files can also be used by instances in the tracefs
directory, they need to be carefully done. Each instance has a trace_array
associated to it, and when the instance is removed, the trace_array is
freed. But if an instance is opened with a reference to the trace_array,
then it requires looking up the trace_array to get its ref counter (as there
could be a race with it being deleted and the open itself). Once it is
found, a reference is added to prevent the instance from being removed (and
the trace_array associated with it freed).

Combine the two checks (tracing_disabled and trace_array_get()) into a
single helper function. This will also make it easier to add lockdown to
tracefs later.

Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Have trace events system open call tracing_open_generic_tr()

Instead of having the trace events system open call open code the taking of
the trace_array descriptor (with trace_array_get()) and then calling
trace_open_generic(), have it use the tracing_open_generic_tr() that does
the combination of the two. This requires making tracing_open_generic_tr()
global.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Get trace_array reference for available_tracers files

As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.

Cc: stable@vger.kernel.org
Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace: Get a reference counter for the trace_array on filter files

The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for
an instance now. They need to take a reference to the instance otherwise
there could be a race between accessing the files and deleting the instance.

It wasn't until the :mod: caching where these file operations started
referencing the trace_array directly.

Cc: stable@vger.kernel.org
Fixes: 673feb9d76ab3 ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracefs: Revert ccbd54ff54e8 ("tracefs: Restrict tracefs when the kernel is locked down")

Running the latest kernel through my "make instances" stress tests, I
triggered the following bug (with KASAN and kmemleak enabled):

mkdir invoked oom-killer:
gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0,
oom_score_adj=0
CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
Call Trace:
dump_stack+0x64/0x8c
dump_header+0x43/0x3b7
? trace_hardirqs_on+0x48/0x4a
oom_kill_process+0x68/0x2d5
out_of_memory+0x2aa/0x2d0
__alloc_pages_nodemask+0x96d/0xb67
__alloc_pages_node+0x19/0x1e
alloc_slab_page+0x17/0x45
new_slab+0xd0/0x234
___slab_alloc.constprop.86+0x18f/0x336
? alloc_inode+0x2c/0x74
? irq_trace+0x12/0x1e
? tracer_hardirqs_off+0x1d/0xd7
? __slab_alloc.constprop.85+0x21/0x53
__slab_alloc.constprop.85+0x31/0x53
? __slab_alloc.constprop.85+0x31/0x53
? alloc_inode+0x2c/0x74
kmem_cache_alloc+0x50/0x179
? alloc_inode+0x2c/0x74
alloc_inode+0x2c/0x74
new_inode_pseudo+0xf/0x48
new_inode+0x15/0x25
tracefs_get_inode+0x23/0x7c
? lookup_one_len+0x54/0x6c
tracefs_create_file+0x53/0x11d
trace_create_file+0x15/0x33
event_create_dir+0x2a3/0x34b
__trace_add_new_event+0x1c/0x26
event_trace_add_tracer+0x56/0x86
trace_array_create+0x13e/0x1e1
instance_mkdir+0x8/0x17
tracefs_syscall_mkdir+0x39/0x50
? get_dname+0x31/0x31
vfs_mkdir+0x78/0xa3
do_mkdirat+0x71/0xb0
sys_mkdir+0x19/0x1b
do_fast_syscall_32+0xb0/0xed

I bisected this down to the addition of the proxy_ops into tracefs for
lockdown. It appears that the allocation of the proxy_ops and then freeing
it in the destroy_inode callback, is causing havoc with the memory system.
Reading the documentation about destroy_inode and talking with Linus about
this, this is buggy and wrong. When defining the destroy_inode() method, it
is expected that the destroy_inode() will also free the inode, and not just
the extra allocations done in the creation of the inode. The faulty commit
causes a memory leak of the inode data structure when they are deleted.

Instead of allocating the proxy_ops (and then having to free it) the checks
should be done by the open functions themselves, and not hack into the
tracefs directory. First revert the tracefs updates for locked_down and then
later we can add the locked_down checks in the kernel/trace files.

Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home
Fixes: ccbd54ff54e8 ("tracefs: Restrict tracefs when the kernel is locked down")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'char-misc-5.4-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.4-rc3.

  Nothing huge here. Some binder driver fixes (although it is still
  being discussed if these all fix the reported issues or not, so more
  might be coming later), some mei device ids and fixes, and a google
  firmware driver bugfix that fixes a regression, as well as some other
  tiny fixes.

  All have been in linux-next with no reported issues"

* tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  firmware: google: increment VPD key_len properly
  w1: ds250x: Fix build error without CRC16
  virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr
  binder: Fix comment headers on binder_alloc_prepare_to_free()
  binder: prevent UAF read in print_binder_transaction_log_entry()
  misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach
  mei: avoid FW version request on Ibex Peak and earlier
  mei: me: add comet point (lake) LP device ids

Merge tag 'staging-5.4-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
"Here are some staging and IIO driver fixes for 5.4-rc3.

  The "biggest" thing here is a removal of the fbtft device and flexfb
  code as they have been abandoned by their authors and are no longer
  needed for that hardware.

  Other than that, the usual amount of staging driver and iio driver
  fixes for reported issues, and some speakup sysfs file documentation,
  which has been long awaited for.

  All have been in linux-next with no reported issues"

* tag 'staging-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits)
  iio: Fix an undefied reference error in noa1305_probe
  iio: light: opt3001: fix mutex unlock race
  iio: adc: ad799x: fix probe error handling
  iio: light: add missing vcnl4040 of_compatible
  iio: light: fix vcnl4000 devicetree hooks
  iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  iio: adc: axp288: Override TS pin bias current for some models
  iio: imu: adis16400: fix memory leak
  iio: imu: adis16400: release allocated memory on failure
  iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
  iio: adc: stm32-adc: move registers definitions
  iio: accel: adxl372: Perform a reset at start up
  iio: accel: adxl372: Fix push to buffers lost samples
  iio: accel: adxl372: Fix/remove limitation for FIFO samples
  iio: adc: hx711: fix bug in sampling of data
  staging: vt6655: Fix memory leak in vt6655_probe
  staging: exfat: Use kvzalloc() instead of kzalloc() for exfat_sb_info
  Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc
  staging: speakup: document sysfs attributes
  staging: rtl8188eu: fix HighestRate check in odm_ARFBRefresh_8188E()
  ...

Merge tag 'tty-5.4-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.4-rc3 that
  resolve a number of reported issues and regressions.

  None of these are huge, full details are in the shortlog. There's also
  a MAINTAINERS update that I think you might have already taken in your
  tree already, but git should handle that merge easily.

  All have been in linux-next with no reported issues"

* tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
  tty: serial: imx: Use platform_get_irq_optional() for optional IRQs
  serial: fix kernel-doc warning in comments
  serial: 8250_omap: Fix gpio check for auto RTS/CTS
  serial: mctrl_gpio: Check for NULL pointer
  tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()
  tty: serial: Fix PORT_LINFLEXUART definition
  tty: n_hdlc: fix build on SPARC
  serial: uartps: Fix uartps_major handling
  serial: uartlite: fix exit path null pointer
  tty: serial: linflexuart: Fix magic SysRq handling
  serial: sh-sci: Use platform_get_irq_optional() for optional interrupts
  dt-bindings: serial: sh-sci: Document r8a774b1 bindings
  serial/sifive: select SERIAL_EARLYCON
  tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'
  tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'

Merge tag 'usb-5.4-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.

  syzbot has stepped up its testing of the USB driver stack, now able to
  trigger fun race conditions between disconnect and probe functions.
  Because of that we have a lot of fixes in here from Johan and others
  fixing these reported issues that have been around since almost all
  time.

  We also are just deleting the rio500 driver, making all of the syzbot
  bugs found in it moot as it turns out no one has been using it for
  years as there is a userspace version that is being used instead.

  There are also a number of other small fixes in here, all resolving
  reported issues or regressions.

  All have been in linux-next without any reported issues"

* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
  USB: yurex: fix NULL-derefs on disconnect
  USB: iowarrior: use pr_err()
  USB: iowarrior: drop redundant iowarrior mutex
  USB: iowarrior: drop redundant disconnect mutex
  USB: iowarrior: fix use-after-free after driver unbind
  USB: iowarrior: fix use-after-free on release
  USB: iowarrior: fix use-after-free on disconnect
  USB: chaoskey: fix use-after-free on release
  USB: adutux: fix use-after-free on release
  USB: ldusb: fix NULL-derefs on driver unbind
  USB: legousbtower: fix use-after-free on release
  usb: cdns3: Fix for incorrect DMA mask.
  usb: cdns3: fix cdns3_core_init_role()
  usb: cdns3: gadget: Fix full-speed mode
  USB: usb-skeleton: drop redundant in-urb check
  USB: usb-skeleton: fix use-after-free after driver unbind
  USB: usb-skeleton: fix NULL-deref on disconnect
  usb:cdns3: Fix for CV CH9 running with g_zero driver.
  usb: dwc3: Remove dev_err() on platform_get_irq() failure
  usb: dwc3: Switch to platform_get_irq_byname_optional()
  ...

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"Two fixes: a guest-cputime accounting fix, and a cgroup bandwidth
  quota precision fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/vtime: Fix guest/system mis-accounting on task switch
  sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a couple of updates for new Intel
  models (which are technically hw-enablement, but to users it's a fix
  to perf behavior on those new CPUs - hope this is fine), an AUX
  inheritance fix, event time-sharing fix, and a fix for lost non-perf
  NMI events on AMD systems"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  perf/x86/cstate: Add Tiger Lake CPU support
  perf/x86/msr: Add Tiger Lake CPU support
  perf/x86/intel: Add Tiger Lake CPU support
  perf/x86/cstate: Update C-state counters for Ice Lake
  perf/x86/msr: Add new CPU model numbers for Ice Lake
  perf/x86/cstate: Add Comet Lake CPU support
  perf/x86/msr: Add Comet Lake CPU support
  perf/x86/intel: Add Comet Lake CPU support
  perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
  perf/core: Fix corner case in perf_rotate_context()
  perf/core: Rework memory accounting in perf_mmap()
  perf/core: Fix inheritance of aux_output groups
  perf annotate: Don't return -1 for error when doing BPF disassembly
  perf annotate: Return appropriate error code for allocation failures
  perf annotate: Fix arch specific ->init() failure errors
  perf annotate: Propagate the symbol__annotate() error return
  perf annotate: Fix the signedness of failure returns
  perf annotate: Propagate perf_env__arch() error
  perf evsel: Fall back to global 'perf_env' in perf_evsel__env()
  perf tools: Propagate get_cpuid() error
  ...

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes all across the map: CPER error report fixes, fixes to
  TPM event log parsing, fix for a kexec hang, a Sparse fix and other
  fixes"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/tpm: Fix sanity check of unsigned tbl_size being less than zero
  efi/x86: Do not clean dummy variable in kexec path
  efi: Make unexported efi_rci2_sysfs_init() static
  efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing
  efi/tpm: Don't traverse an event log with no events
  efi/tpm: Don't access event->count when it isn't mapped
  efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified
  efi/cper: Fix endianness of PCIe class code

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"A handful of fixes: a kexec linking fix, an AMD MWAITX fix, a vmware
  guest support fix when built under Clang, and new CPU model number
  definitions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Comet Lake to the Intel CPU models header
  lib/string: Make memzero_explicit() inline instead of external
  x86/cpu/vmware: Use the full form of INL in VMWARE_PORT
  x86/asm: Fix MWAITX C-state hint value

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 license tag fixlets from Ingo Molnar:
"Fix a couple of SPDX tags in x86 headers to follow the canonical
pattern"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Use the correct SPDX License Identifier in headers

Merge tag 'riscv/for-v5.4-rc3' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:

- Fix several bugs in the breakpoint trap handler

- Drop an unnecessary loop around calls to preempt_schedule_irq()

* tag 'riscv/for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: entry: Remove unneeded need_resched() loop
  riscv: Correct the handling of unexpected ebreak in do_trap_break()
  riscv: avoid sending a SIGTRAP to a user thread trapped in WARN()
  riscv: avoid kernel hangs when trapped in BUG()

Merge tag 'mips_fixes_5.4_2' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:

- Build fixes for CONFIG_OPTIMIZE_INLINING=y builds in which the
   compiler may choose not to inline __xchg() & __cmpxchg().

- A build fix for Loongson configurations with GCC 9.x.

- Expose some extra HWCAP bits to indicate support for various
   instruction set extensions to userland.

- Fix bad stack access in firmware handling code for old SNI
   RM200/300/400 machines.

* tag 'mips_fixes_5.4_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Disable Loongson MMI instructions for kernel build
  MIPS: elf_hwcap: Export userspace ASEs
  MIPS: fw: sni: Fix out of bounds init of o32 stack
  MIPS: include: Mark __xchg as __always_inline
  MIPS: include: Mark __cmpxchg as __always_inline

Merge tag 'powerpc-5.4-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Fix a kernel crash in spufs_create_root() on Cell machines, since the
  new mount API went in.

  Fix a regression in our KVM code caused by our recent PCR changes.

  Avoid a warning message about a failing hypervisor API on systems that
  don't have that API.

  A couple of minor build fixes.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do
  Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen
  Rothwell"

* tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  spufs: fix a crash in spufs_create_root()
  powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host
  selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
  powerpc/pseries: Remove confusing warning message.
  powerpc/64s/radix: Fix build failure with RADIX_MMU=n

Merge tag 'for-linus-5.4-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- correct panic handling when running as a Xen guest

- cleanup the Xen grant driver to remove printing a pointer being
   always NULL

- remove a soon to be wrong call of of_dma_configure()

* tag 'for-linus-5.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Stop abusing DT of_dma_configure API
  xen/grant-table: remove unnecessary printing
  x86/xen: Return from panic notifier

Merge tag 's390-5.4-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- Fix virtio-ccw DMA regression

- Fix compiler warnings in uaccess

* tag 's390-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uaccess: avoid (false positive) compiler warnings
s390/cio: fix virtio-ccw DMA without PV

perf/x86/cstate: Add Tiger Lake CPU support

Tiger Lake is the followon to Ice Lake. From the perspective of Intel
cstate residency counters, there is nothing changed compared with
Ice Lake.

Share icl_cstates with Ice Lake.
Update the comments for Tiger Lake.

The External Design Specification (EDS) is not published yet. It comes
from an authoritative internal source.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-10-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/msr: Add Tiger Lake CPU support

Tiger Lake is the followon to Ice Lake. PPERF and SMI_COUNT MSRs are
also supported.

The External Design Specification (EDS) is not published yet. It comes
from an authoritative internal source.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-9-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Add Tiger Lake CPU support

Tiger Lake is the followon to Ice Lake. From the perspective of Intel
core PMU, there is little changes compared with Ice Lake, e.g. small
changes in event list. But it doesn't impact on core PMU functionality.
Share the perf code with Ice Lake. The event list patch will be submitted
later separately.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/cstate: Update C-state counters for Ice Lake

There is no Core C3 C-State counter for Ice Lake.
Package C8/C9/C10 C-State counters are added for Ice Lake.

Introduce a new event list, icl_cstates, for Ice Lake.
Update the comments accordingly.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f08c47d1f86c ("perf/x86/intel/cstate: Add Icelake support")
Link: https://lkml.kernel.org/r/1570549810-25049-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/msr: Add new CPU model numbers for Ice Lake

PPERF and SMI_COUNT MSRs are also supported by Ice Lake desktop and
server.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/cstate: Add Comet Lake CPU support

Comet Lake is the new 10th Gen Intel processor. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Kaby Lake.

Share hswult_cstates with Kaby Lake.
Update the comments for Comet Lake.
Kaby Lake is missed in the comments for some Residency Counters. Update
the comments for Kaby Lake as well.

The External Design Specification (EDS) is not published yet. It comes
from an authoritative internal source.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/msr: Add Comet Lake CPU support

Comet Lake is the new 10th Gen Intel processor. PPERF and SMI_COUNT MSRs
are also supported.

The External Design Specification (EDS) is not published yet. It comes
from an authoritative internal source.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Add Comet Lake CPU support

Comet Lake is the new 10th Gen Intel processor. From the perspective
of Intel PMU, there is nothing changed compared with Sky Lake.
Share the perf code with Sky Lake.

The patch has been tested on real hardware.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1570549810-25049-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'x86/urgent' into perf/urgent, to pick up new CPU model definitions

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Input: synaptics-rmi4 - avoid processing unknown IRQs

rmi_process_interrupt_requests() calls handle_nested_irq() for
each interrupt status bit it finds. If the irq domain mapping for
this bit had not yet been set up, then it ends up calling
handle_nested_irq(0), which causes a NULL pointer dereference.

There's already code that masks the irq_status bits coming out of the
hardware with current_irq_mask, presumably to avoid this situation.
However current_irq_mask seems to more reflect the actual mask set
in the hardware rather than the IRQs software has set up and registered
for. For example, in rmi_driver_reset_handler(), the current_irq_mask
is initialized based on what is read from the hardware. If the reset
value of this mask enables IRQs that Linux has not set up yet, then
we end up in this situation.

There appears to be a third unused bitmask that used to serve this
purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask
to avoid calling handle_nested_irq() on IRQs that have not yet been
set up.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client bugfixes from Anna Schumaker:
"Stable bugfixes:
   - Fix O_DIRECT accounting of number of bytes read/written # v4.1+

  Other fixes:
   - Fix nfsi->nrequests count error on nfs_inode_remove_request()
   - Remove redundant mirror tracking in O_DIRECT
   - Fix leak of clp->cl_acceptor string
   - Fix race to sk_err after xs_error_report"

* tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: fix race to sk_err after xs_error_report
  NFSv4: Fix leak of clp->cl_acceptor string
  NFS: Remove redundant mirror tracking in O_DIRECT
  NFS: Fix O_DIRECT accounting of number of bytes read/written
  nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request

Merge tag '5.4-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Eight small SMB3 fixes, four for stable, and important fix for the
  recent regression introduced by filesystem timestamp range patches"

* tag '5.4-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Force reval dentry if LOOKUP_REVAL flag is set
  CIFS: Force revalidate inode when dentry is stale
  smb3: Fix regression in time handling
  smb3: remove noisy debug message and minor cleanup
  CIFS: Gracefully handle QueryInfo errors during open
  cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic
  fs: cifs: mute -Wunused-const-variable message
  smb3: cleanup some recent endian errors spotted by updated sparse

Merge tag 'modules-for-v5.4-rc3' of git://git./linux/kernel/git/jeyu/linux

Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.

  Most importantly, it fixes a namespace-related modpost issue for
  external module builds

   - Fix broken external module builds due to a modpost bug in
     read_dump(), where the namespace was not being strdup'd and
     sym->namespace would be set to bogus data.

   - Various namespace-related kbuild fixes and cleanups thanks to
     Masahiro Yamada"

* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  doc: move namespaces.rst from kbuild/ to core-api/
  nsdeps: make generated patches independent of locale
  nsdeps: fix hashbang of scripts/nsdeps
  kbuild: fix build error of 'make nsdeps' in clean tree
  module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
  modpost: fix broken sym->namespace for external module builds
  module: swap the order of symbol.namespace
  scripts: add_namespace: Fix coccicheck failed

Merge tag 'hyperv-fixes-signed' of git://git./linux/kernel/git/hyperv/linux

Pull Hyper-V fixes from Sasha Levin:
"Two fixes from Dexuan Cui:

   - Fix a (harmless) warning when building vmbus without
     CONFIG_PM_SLEEP

   - Fix for a memory leak (and optimization) in the hyperv mouse code"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Fix harmless building warnings without CONFIG_PM_SLEEP
  HID: hyperv: Use in-place iterator API in the channel callback

Documentation/process: Add fallthrough pseudo-keyword

Describe the fallthrough pseudo-keyword.

Convert the coding-style.rst example to the keyword style.
Add description and links to deprecated.rst.

Miguel Ojeda comments on the eventual [[fallthrough]] syntax:
"Note that C17/C18 does not have [[fallthrough]].

  C++17 introduced it, as it is mentioned above. I would keep the
  __attribute__((fallthrough)) -> [[fallthrough]] change you did,
  though, since that is indeed the standard syntax (given the paragraph
  references C++17).

  I was told by Aaron Ballman (who is proposing them for C) that it is
  more or less likely that it becomes standardized in C2x. However, it
  is still not added to the draft (other attributes are already,
  though). See N2268 and N2269:

     http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2268.pdf (fallthrough)
     http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2269.pdf (attributes in general)"

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

compiler_attributes.h: Add 'fallthrough' pseudo keyword for switch/case use

Reserve the pseudo keyword 'fallthrough' for the ability to convert the
various case block /* fallthrough */ style comments to appear to be an
actual reserved word with the same gcc case block missing fallthrough
warning capability.

All switch/case blocks now should end in one of:

break;
fallthrough;
goto <label>;
return [expression];
continue;

In C mode, GCC supports the __fallthrough__ attribute since 7.1,
the same time the warning and the comment parsing were introduced.

fallthrough devolves to an empty "do {} while (0)" if the compiler
version (any version less than gcc 7) does not support the attribute.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: sctp: Rename fallthrough label to unhandled

fallthrough will become a pseudo reserved keyword so this only use of
fallthrough is better renamed to allow it.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-fixes-2019-10-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"The regular fixes pull for rc3. The i915 team found some fixes they
  (or I) missed for rc1, which is why this is a bit bigger than usual,
  otherwise there is a single amdgpu fix, some spi panel aliases, and a
  bridge fix.

  i915:
   - execlist access fixes
   - list deletion fix
   - CML display fix
   - HSW workaround extension to GT2
   - chicken bit whitelist
   - GGTT resume issue
   - SKL GPU hangs for Vulkan compute

  amdgpu:
   - memory leak fix

  panel:
   - spi aliases

  tc358767:
   - bridge artifacts fix"

* tag 'drm-fixes-2019-10-11' of git://anongit.freedesktop.org/drm/drm: (22 commits)
  drm/bridge: tc358767: fix max_tu_symbol value
  drm/i915/gt: execlists->active is serialised by the tasklet
  drm/i915/execlists: Protect peeking at execlists->active
  drm/i915: Fixup preempt-to-busy vs reset of a virtual request
  drm/i915: Only enqueue already completed requests
  drm/i915/execlists: Drop redundant list_del_init(&rq->sched.link)
  drm/i915/cml: Add second PCH ID for CMP
  drm/amdgpu: fix memory leak
  drm/panel: tpo-td043mtea1: Fix SPI alias
  drm/panel: tpo-td028ttec1: Fix SPI alias
  drm/panel: sony-acx565akm: Fix SPI alias
  drm/panel: nec-nl8048hl11: Fix SPI alias
  drm/panel: lg-lb035q02: Fix SPI alias
  drm/i915: Mark contents as dirty on a write fault
  drm/i915: Prevent bonded requests from overtaking each other on preemption
  drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled
  drm/i915: Verify the engine after acquiring the active.lock
  drm/i915: Extend Haswell GT1 PSMI workaround to all
  drm/i915: Don't mix srcu tag and negative error codes
  drm/i915: Whitelist COMMON_SLICE_CHICKEN2
  ...

Merge tag 'for-linus-20191010' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Fix wbt performance regression introduced with the blk-rq-qos
   refactoring (Harshad)

- Fix io_uring fileset removal inadvertently killing the workqueue (me)

- Fix io_uring typo in linked command nonblock submission (Pavel)

- Remove spurious io_uring wakeups on request free (Pavel)

- Fix null_blk zoned command error return (Keith)

- Don't use freezable workqueues for backing_dev, also means we can
   revert a previous libata hack (Mika)

- Fix nbd sysfs mutex dropped too soon at removal time (Xiubo)

* tag 'for-linus-20191010' of git://git.kernel.dk/linux-block:
  nbd: fix possible sysfs duplicate warning
  null_blk: Fix zoned command return code
  io_uring: only flush workqueues on fileset removal
  io_uring: remove wait loop spurious wakeups
  blk-wbt: fix performance regression in wbt scale_up/scale_down
  Revert "libata, freezer: avoid block device removal while system is frozen"
  bdi: Do not use freezable workqueue
  io_uring: fix reversed nonblock flag for link submission

tools/virtio: more stubs

fix test module build.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

s390/uaccess: avoid (false positive) compiler warnings

Depending on inlining decisions by the compiler, __get/put_user_fn
might become out of line. Then the compiler is no longer able to tell
that size can only be 1,2,4 or 8 due to the check in __get/put_user
resulting in false positives like

./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’:
./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  113 |  return rc;
      |         ^~
./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’:
./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  143 |  return rc;
      |         ^~

These functions are supposed to be always inlined. Mark it as such.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

firmware: google: increment VPD key_len properly

Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.

On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...

Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <stable@vger.kernel.org>
Cc: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb

I'm interested in kdb / kgdb and have sent various fixes over the
years. I'd like to get CCed on patches so I can be aware of them and
also help review.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20190920104404.1.I237e68e8825e2d6ac26f8e847f521fe2fcc3705a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spufs: fix a crash in spufs_create_root()

The spu_fs_context was not set in fc->fs_private, this caused a crash
when accessing ctx->mode in spufs_create_root().

Fixes: d2e0981c3b9a ("vfs: Convert spufs to use the new mount API")
Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191008141342.GA266797@gmail.com

io_uring: fix sequence logic for timeout requests

We have two ways a request can be deferred:

1) It's a regular request that depends on another one
2) It's a timeout that tracks completions

We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.

Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'drm-intel-fixes-2019-10-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix CML display by adding a missing ID.
- Drop redundant list_del_init
- Only enqueue already completed requests to avoid races
- Fixup preempt-to-busy vs reset of a virtual request
- Protect peeking at execlists->active
- execlists->active is serialised by the tasklet

drm-intel-next-fixes-2019-09-19:
- Extend old HSW workaround to fix some GPU hangs on Haswell GT2
- Fix return error code on GEM mmap.
- White list a chicken bit register for push constants legacy mode on Mesa
- Fix resume issue related to GGTT restore
- Remove incorrect BUG_ON on execlist's schedule-out
- Fix unrecoverable GPU hangs with Vulkan compute workloads on SKL

drm-intel-next-fixes-2019-09-26:
- Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010143039.GA15313@intel.com

Merge tag 'drm-fixes-5.4-2019-10-09' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

drm-fixes-5.4-2019-10-09:

amdgpu:
- fix memory leak in bo_list ioctl error path

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010031023.23359-1-alexander.deucher@amd.com