drm/amd/powerplay: detect version of smu backend (v2)

Print the backend type.

v2: whitespace fixes (Alex)

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix sdma queue allocate race condition

SDMA queue allocation requires the dqm lock as it modify
the global dqm members. Enclose it in the dqm_lock.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix a circular lock dependency

The idea to break the circular lock dependency is to temporarily drop
dqm lock before calling allocate_mqd. See callstack #1 below.

[   59.510149] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0

[  513.604034] ======================================================
[  513.604205] WARNING: possible circular locking dependency detected
[  513.604375] 4.18.0-kfd-root #2 Tainted: G        W
[  513.604530] ------------------------------------------------------
[  513.604699] kswapd0/611 is trying to acquire lock:
[  513.604840] 00000000d254022e (&dqm->lock_hidden){+.+.}, at: evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.605150]
               but task is already holding lock:
[  513.605307] 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.605540]
               which lock already depends on the new lock.

[  513.605747]
               the existing dependency chain (in reverse order) is:
[  513.605944]
               -> #4 (&anon_vma->rwsem){++++}:
[  513.606106]        __vma_adjust+0x147/0x7f0
[  513.606231]        __split_vma+0x179/0x190
[  513.606353]        mprotect_fixup+0x217/0x260
[  513.606553]        do_mprotect_pkey+0x211/0x380
[  513.606752]        __x64_sys_mprotect+0x1b/0x20
[  513.606954]        do_syscall_64+0x50/0x1a0
[  513.607149]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.607380]
               -> #3 (&mapping->i_mmap_rwsem){++++}:
[  513.607678]        rmap_walk_file+0x1f0/0x280
[  513.607887]        page_referenced+0xdd/0x180
[  513.608081]        shrink_page_list+0x853/0xcb0
[  513.608279]        shrink_inactive_list+0x33b/0x700
[  513.608483]        shrink_node_memcg+0x37a/0x7f0
[  513.608682]        shrink_node+0xd8/0x490
[  513.608869]        balance_pgdat+0x18b/0x3b0
[  513.609062]        kswapd+0x203/0x5c0
[  513.609241]        kthread+0x100/0x140
[  513.609420]        ret_from_fork+0x24/0x30
[  513.609607]
               -> #2 (fs_reclaim){+.+.}:
[  513.609883]        kmem_cache_alloc_trace+0x34/0x2e0
[  513.610093]        reservation_object_reserve_shared+0x139/0x300
[  513.610326]        ttm_bo_init_reserved+0x291/0x480 [ttm]
[  513.610567]        amdgpu_bo_do_create+0x1d2/0x650 [amdgpu]
[  513.610811]        amdgpu_bo_create+0x40/0x1f0 [amdgpu]
[  513.611041]        amdgpu_bo_create_reserved+0x249/0x2d0 [amdgpu]
[  513.611290]        amdgpu_bo_create_kernel+0x12/0x70 [amdgpu]
[  513.611584]        amdgpu_ttm_init+0x2cb/0x560 [amdgpu]
[  513.611823]        gmc_v9_0_sw_init+0x400/0x750 [amdgpu]
[  513.612491]        amdgpu_device_init+0x14eb/0x1990 [amdgpu]
[  513.612730]        amdgpu_driver_load_kms+0x78/0x290 [amdgpu]
[  513.612958]        drm_dev_register+0x111/0x1a0
[  513.613171]        amdgpu_pci_probe+0x11c/0x1e0 [amdgpu]
[  513.613389]        local_pci_probe+0x3f/0x90
[  513.613581]        pci_device_probe+0x102/0x1c0
[  513.613779]        driver_probe_device+0x2a7/0x480
[  513.613984]        __driver_attach+0x10a/0x110
[  513.614179]        bus_for_each_dev+0x67/0xc0
[  513.614372]        bus_add_driver+0x1eb/0x260
[  513.614565]        driver_register+0x5b/0xe0
[  513.614756]        do_one_initcall+0xac/0x357
[  513.614952]        do_init_module+0x5b/0x213
[  513.615145]        load_module+0x2542/0x2d30
[  513.615337]        __do_sys_finit_module+0xd2/0x100
[  513.615541]        do_syscall_64+0x50/0x1a0
[  513.615731]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.615963]
               -> #1 (reservation_ww_class_mutex){+.+.}:
[  513.616293]        amdgpu_amdkfd_alloc_gtt_mem+0xcf/0x2c0 [amdgpu]
[  513.616554]        init_mqd+0x223/0x260 [amdgpu]
[  513.616779]        create_queue_nocpsch+0x4d9/0x600 [amdgpu]
[  513.617031]        pqm_create_queue+0x37c/0x520 [amdgpu]
[  513.617270]        kfd_ioctl_create_queue+0x2f9/0x650 [amdgpu]
[  513.617522]        kfd_ioctl+0x202/0x350 [amdgpu]
[  513.617724]        do_vfs_ioctl+0x9f/0x6c0
[  513.617914]        ksys_ioctl+0x66/0x70
[  513.618095]        __x64_sys_ioctl+0x16/0x20
[  513.618286]        do_syscall_64+0x50/0x1a0
[  513.618476]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.618695]
               -> #0 (&dqm->lock_hidden){+.+.}:
[  513.618984]        __mutex_lock+0x98/0x970
[  513.619197]        evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.619459]        kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.619710]        kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.620103]        amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.620363]        amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.620614]        __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.620851]        try_to_unmap_one+0x7fc/0x8f0
[  513.621049]        rmap_walk_anon+0x121/0x290
[  513.621242]        try_to_unmap+0x93/0xf0
[  513.621428]        shrink_page_list+0x606/0xcb0
[  513.621625]        shrink_inactive_list+0x33b/0x700
[  513.621835]        shrink_node_memcg+0x37a/0x7f0
[  513.622034]        shrink_node+0xd8/0x490
[  513.622219]        balance_pgdat+0x18b/0x3b0
[  513.622410]        kswapd+0x203/0x5c0
[  513.622589]        kthread+0x100/0x140
[  513.622769]        ret_from_fork+0x24/0x30
[  513.622957]
               other info that might help us debug this:

[  513.623354] Chain exists of:
                 &dqm->lock_hidden --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem

[  513.623900]  Possible unsafe locking scenario:

[  513.624189]        CPU0                    CPU1
[  513.624397]        ----                    ----
[  513.624594]   lock(&anon_vma->rwsem);
[  513.624771]                                lock(&mapping->i_mmap_rwsem);
[  513.625020]                                lock(&anon_vma->rwsem);
[  513.625253]   lock(&dqm->lock_hidden);
[  513.625433]
                *** DEADLOCK ***

[  513.625783] 3 locks held by kswapd0/611:
[  513.625967]  #0: 00000000f14edf84 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
[  513.626309]  #1: 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.626671]  #2: 0000000067b5cd12 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x5/0xb0
[  513.627037]
               stack backtrace:
[  513.627292] CPU: 0 PID: 611 Comm: kswapd0 Tainted: G        W         4.18.0-kfd-root #2
[  513.627632] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  513.627990] Call Trace:
[  513.628143]  dump_stack+0x7c/0xbb
[  513.628315]  print_circular_bug.isra.37+0x21b/0x228
[  513.628581]  __lock_acquire+0xf7d/0x1470
[  513.628782]  ? unwind_next_frame+0x6c/0x4f0
[  513.628974]  ? lock_acquire+0xec/0x1e0
[  513.629154]  lock_acquire+0xec/0x1e0
[  513.629357]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.629587]  __mutex_lock+0x98/0x970
[  513.629790]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630047]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630309]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630562]  evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630816]  kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.631057]  kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.631288]  amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.631536]  amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.632076]  __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.632299]  try_to_unmap_one+0x7fc/0x8f0
[  513.632487]  ? page_lock_anon_vma_read+0x68/0x250
[  513.632690]  rmap_walk_anon+0x121/0x290
[  513.632875]  try_to_unmap+0x93/0xf0
[  513.633050]  ? page_remove_rmap+0x330/0x330
[  513.633239]  ? rcu_read_unlock+0x60/0x60
[  513.633422]  ? page_get_anon_vma+0x160/0x160
[  513.633613]  shrink_page_list+0x606/0xcb0
[  513.633800]  shrink_inactive_list+0x33b/0x700
[  513.633997]  shrink_node_memcg+0x37a/0x7f0
[  513.634186]  ? shrink_node+0xd8/0x490
[  513.634363]  shrink_node+0xd8/0x490
[  513.634537]  balance_pgdat+0x18b/0x3b0
[  513.634718]  kswapd+0x203/0x5c0
[  513.634887]  ? wait_woken+0xb0/0xb0
[  513.635062]  kthread+0x100/0x140
[  513.635231]  ? balance_pgdat+0x3b0/0x3b0
[  513.635414]  ? kthread_delayed_work_timer_fn+0x80/0x80
[  513.635626]  ret_from_fork+0x24/0x30
[  513.636042] Evicting PASID 32768 queues
[  513.936236] Restoring PASID 32768 queues
[  524.708912] Evicting PASID 32768 queues
[  524.999875] Restoring PASID 32768 queues

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Fix a circular lock dependency"

This reverts commit 06b89b38f3cc518a761164f9f958a9607bbb3587.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Fix sdma queue allocate race condition"

This reverts commit f77dac6cd62e5d4bcadd740620af1218bfb54cc6.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: explicitly set mmGDS_VMID0_BASE to 0

Explicitly set mmGDS_VMID0_BASE to 0. Also update
GDS_VMID0_BASE/_SIZE with direct register writes.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix compilation error

this patch fixes below compilation error

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In
function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’
[-Werror=implicit-function-declaration]
   udelay(underflow_check_delay_us);

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_dm: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: hersen wu <hersenxs.wu@amd.com>
Cc: "Leo (Hanghong) Ma" <hanghong.ma@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: xinhui pan <xinhui.pan@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Feifei Xu <Feifei.Xu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump the DRM version for GDS ENOMEM fixes

So userspace knows when this fix is available.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware

Fixes SI cards running on amdgpu.

Fixes: 1929059893022 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reserve space for shared fence

Call reservation_object_reserve_shared to reserve
space for shared fence. Otherwise it will trigger
BUG_ON condition in reservation_object_add_shared_fence.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Bail out of BO node creation if not enough VRAM (v3)

(v2): Return 0 and set mem->mm_node to NULL.
(v3): Use atomic64_add_return instead.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: register pm sysfs for sriov (v2)

we need register pm sysfs for virt in order
to support dpm level modification because
smu ip block will not be added under SRIOV

v2: whitespace fixes (Alex)

Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add device to topology after it is completely inited

We can't have devices that are not completely initialized in kfd topology.
Otherwise it is a race condition when user access not completely
initialized device. This also addresses a kfd_topology_add_device accessing
NULL dqm pointer issue.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Initialize HSA_CAP_ATS_PRESENT capability in topology codes

Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to
kfd topology codes. This removes kfd_iommu_device_init's dependency
on kfd_topology_add_device. Also remove duplicate code setting the
same.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix sdma queue allocate race condition

SDMA queue allocation requires the dqm lock at it modify
the global dqm members. Move up the dqm_lock so sdma
queue allocation is enclosed in the critical section. Move
mqd allocation out of critical section to avoid circular
lock dependency.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix a circular lock dependency

The idea to break the circular lock dependency is to move allocate_mqd
out of dqm lock protection. See callstack #1 below.

[   59.510149] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0

[  513.604034] ======================================================
[  513.604205] WARNING: possible circular locking dependency detected
[  513.604375] 4.18.0-kfd-root #2 Tainted: G        W
[  513.604530] ------------------------------------------------------
[  513.604699] kswapd0/611 is trying to acquire lock:
[  513.604840] 00000000d254022e (&dqm->lock_hidden){+.+.}, at: evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.605150]
               but task is already holding lock:
[  513.605307] 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.605540]
               which lock already depends on the new lock.

[  513.605747]
               the existing dependency chain (in reverse order) is:
[  513.605944]
               -> #4 (&anon_vma->rwsem){++++}:
[  513.606106]        __vma_adjust+0x147/0x7f0
[  513.606231]        __split_vma+0x179/0x190
[  513.606353]        mprotect_fixup+0x217/0x260
[  513.606553]        do_mprotect_pkey+0x211/0x380
[  513.606752]        __x64_sys_mprotect+0x1b/0x20
[  513.606954]        do_syscall_64+0x50/0x1a0
[  513.607149]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.607380]
               -> #3 (&mapping->i_mmap_rwsem){++++}:
[  513.607678]        rmap_walk_file+0x1f0/0x280
[  513.607887]        page_referenced+0xdd/0x180
[  513.608081]        shrink_page_list+0x853/0xcb0
[  513.608279]        shrink_inactive_list+0x33b/0x700
[  513.608483]        shrink_node_memcg+0x37a/0x7f0
[  513.608682]        shrink_node+0xd8/0x490
[  513.608869]        balance_pgdat+0x18b/0x3b0
[  513.609062]        kswapd+0x203/0x5c0
[  513.609241]        kthread+0x100/0x140
[  513.609420]        ret_from_fork+0x24/0x30
[  513.609607]
               -> #2 (fs_reclaim){+.+.}:
[  513.609883]        kmem_cache_alloc_trace+0x34/0x2e0
[  513.610093]        reservation_object_reserve_shared+0x139/0x300
[  513.610326]        ttm_bo_init_reserved+0x291/0x480 [ttm]
[  513.610567]        amdgpu_bo_do_create+0x1d2/0x650 [amdgpu]
[  513.610811]        amdgpu_bo_create+0x40/0x1f0 [amdgpu]
[  513.611041]        amdgpu_bo_create_reserved+0x249/0x2d0 [amdgpu]
[  513.611290]        amdgpu_bo_create_kernel+0x12/0x70 [amdgpu]
[  513.611584]        amdgpu_ttm_init+0x2cb/0x560 [amdgpu]
[  513.611823]        gmc_v9_0_sw_init+0x400/0x750 [amdgpu]
[  513.612491]        amdgpu_device_init+0x14eb/0x1990 [amdgpu]
[  513.612730]        amdgpu_driver_load_kms+0x78/0x290 [amdgpu]
[  513.612958]        drm_dev_register+0x111/0x1a0
[  513.613171]        amdgpu_pci_probe+0x11c/0x1e0 [amdgpu]
[  513.613389]        local_pci_probe+0x3f/0x90
[  513.613581]        pci_device_probe+0x102/0x1c0
[  513.613779]        driver_probe_device+0x2a7/0x480
[  513.613984]        __driver_attach+0x10a/0x110
[  513.614179]        bus_for_each_dev+0x67/0xc0
[  513.614372]        bus_add_driver+0x1eb/0x260
[  513.614565]        driver_register+0x5b/0xe0
[  513.614756]        do_one_initcall+0xac/0x357
[  513.614952]        do_init_module+0x5b/0x213
[  513.615145]        load_module+0x2542/0x2d30
[  513.615337]        __do_sys_finit_module+0xd2/0x100
[  513.615541]        do_syscall_64+0x50/0x1a0
[  513.615731]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.615963]
               -> #1 (reservation_ww_class_mutex){+.+.}:
[  513.616293]        amdgpu_amdkfd_alloc_gtt_mem+0xcf/0x2c0 [amdgpu]
[  513.616554]        init_mqd+0x223/0x260 [amdgpu]
[  513.616779]        create_queue_nocpsch+0x4d9/0x600 [amdgpu]
[  513.617031]        pqm_create_queue+0x37c/0x520 [amdgpu]
[  513.617270]        kfd_ioctl_create_queue+0x2f9/0x650 [amdgpu]
[  513.617522]        kfd_ioctl+0x202/0x350 [amdgpu]
[  513.617724]        do_vfs_ioctl+0x9f/0x6c0
[  513.617914]        ksys_ioctl+0x66/0x70
[  513.618095]        __x64_sys_ioctl+0x16/0x20
[  513.618286]        do_syscall_64+0x50/0x1a0
[  513.618476]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  513.618695]
               -> #0 (&dqm->lock_hidden){+.+.}:
[  513.618984]        __mutex_lock+0x98/0x970
[  513.619197]        evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.619459]        kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.619710]        kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.620103]        amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.620363]        amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.620614]        __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.620851]        try_to_unmap_one+0x7fc/0x8f0
[  513.621049]        rmap_walk_anon+0x121/0x290
[  513.621242]        try_to_unmap+0x93/0xf0
[  513.621428]        shrink_page_list+0x606/0xcb0
[  513.621625]        shrink_inactive_list+0x33b/0x700
[  513.621835]        shrink_node_memcg+0x37a/0x7f0
[  513.622034]        shrink_node+0xd8/0x490
[  513.622219]        balance_pgdat+0x18b/0x3b0
[  513.622410]        kswapd+0x203/0x5c0
[  513.622589]        kthread+0x100/0x140
[  513.622769]        ret_from_fork+0x24/0x30
[  513.622957]
               other info that might help us debug this:

[  513.623354] Chain exists of:
                 &dqm->lock_hidden --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem

[  513.623900]  Possible unsafe locking scenario:

[  513.624189]        CPU0                    CPU1
[  513.624397]        ----                    ----
[  513.624594]   lock(&anon_vma->rwsem);
[  513.624771]                                lock(&mapping->i_mmap_rwsem);
[  513.625020]                                lock(&anon_vma->rwsem);
[  513.625253]   lock(&dqm->lock_hidden);
[  513.625433]
                *** DEADLOCK ***

[  513.625783] 3 locks held by kswapd0/611:
[  513.625967]  #0: 00000000f14edf84 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
[  513.626309]  #1: 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[  513.626671]  #2: 0000000067b5cd12 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x5/0xb0
[  513.627037]
               stack backtrace:
[  513.627292] CPU: 0 PID: 611 Comm: kswapd0 Tainted: G        W         4.18.0-kfd-root #2
[  513.627632] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  513.627990] Call Trace:
[  513.628143]  dump_stack+0x7c/0xbb
[  513.628315]  print_circular_bug.isra.37+0x21b/0x228
[  513.628581]  __lock_acquire+0xf7d/0x1470
[  513.628782]  ? unwind_next_frame+0x6c/0x4f0
[  513.628974]  ? lock_acquire+0xec/0x1e0
[  513.629154]  lock_acquire+0xec/0x1e0
[  513.629357]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.629587]  __mutex_lock+0x98/0x970
[  513.629790]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630047]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630309]  ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630562]  evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[  513.630816]  kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[  513.631057]  kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[  513.631288]  amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[  513.631536]  amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[  513.632076]  __mmu_notifier_invalidate_range_start+0x70/0xb0
[  513.632299]  try_to_unmap_one+0x7fc/0x8f0
[  513.632487]  ? page_lock_anon_vma_read+0x68/0x250
[  513.632690]  rmap_walk_anon+0x121/0x290
[  513.632875]  try_to_unmap+0x93/0xf0
[  513.633050]  ? page_remove_rmap+0x330/0x330
[  513.633239]  ? rcu_read_unlock+0x60/0x60
[  513.633422]  ? page_get_anon_vma+0x160/0x160
[  513.633613]  shrink_page_list+0x606/0xcb0
[  513.633800]  shrink_inactive_list+0x33b/0x700
[  513.633997]  shrink_node_memcg+0x37a/0x7f0
[  513.634186]  ? shrink_node+0xd8/0x490
[  513.634363]  shrink_node+0xd8/0x490
[  513.634537]  balance_pgdat+0x18b/0x3b0
[  513.634718]  kswapd+0x203/0x5c0
[  513.634887]  ? wait_woken+0xb0/0xb0
[  513.635062]  kthread+0x100/0x140
[  513.635231]  ? balance_pgdat+0x3b0/0x3b0
[  513.635414]  ? kthread_delayed_work_timer_fn+0x80/0x80
[  513.635626]  ret_from_fork+0x24/0x30
[  513.636042] Evicting PASID 32768 queues
[  513.936236] Restoring PASID 32768 queues
[  524.708912] Evicting PASID 32768 queues
[  524.999875] Restoring PASID 32768 queues

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Separate mqd allocation and initialization

Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Refactor create_queue_nocpsch

This is prepare work to fix a circular lock dependency.
No logic change

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Only load sdma mqd when queue is active

Also calls load_mqd with current->mm struct. The mm
struct is used to read back user wptr of the queue.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Only initialize sdma vm for sdma queues

Don't do the same for compute queues

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use new HMM APIs and helpers

HMM provides new APIs and helps in kernel 5.2-rc1 to simplify driver
path. The old hmm APIs are deprecated and will be removed in future.

Below are changes in driver:

1. Change hmm_vma_fault to hmm_range_register and hmm_range_fault which
supports range with multiple vmas, remove the multiple vmas handle path
and data structure.
2. Change hmm_vma_range_done to hmm_range_unregister.
3. Use default flags to avoid pre-fill pfn arrays.
4. Use new hmm_device_ helpers.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()

The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here.  This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.

This bug is not really a security issue in real life, because debugfs is
generally root only.

Fixes: 36ea1bd2d084 ("drm/amdgpu: add debugfs ctrl node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add CHIP_VEGAM to amdgpu_amdkfd_device_probe

We have the rest of the support in the kerne, but we don't actually boot KFD
on the device without this change

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix pm_load_smu_firmware for SR-IOV

For SR-IOV VF, powerplay may not be supported, in this case,
error '-EINVAL' should not be returned.

Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect

[Why]
Found issue in EDID Emulation where if we connect a display using
 a passive HDMI-DP dongle, disconnect it and then try to emulate
 a display using DP, we could not see 4K modes.  This was because
 on a disconnect, dongle_max_pix_clk was still set so when we
 emulate using DP, in dc_link_validate_mode_timing(), it would
 think we were still using a dongle and limit the modes we support.

[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
 a hotplug out ( if new_connection_type = dc_connection_none ).

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make clk_mgr call enable_pme_wa

refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not grant POST_LT_ADJ when TPS4 is used

[Description]

The spec does not allow POST_LT_ADJ_GRANTED to be set when TPS4 is used.

Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: S3 Resume time increase after decoupling DPMS from fast boot

[Why]
We incorrectly began powering down the display at boot/resume whenever
fast boot was not possible. This should not be done in the case where there
exists a stream for the eDP since this implies that we want to turn it on.

[How]
Add check for eDP stream to decide whether to power off edp.

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Reza Amini <Reza.Amini@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use stream opp_id instead of hubp

[WHY]
By the time output csc matrix is being programmed, stream connection to
OPP has been established, but this information has not been relayed back
to HUBP.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Gamma logic limitations causing unintended use of RAM over ROM.

[Why]
Our existing logic in deciding whether to use RAM or ROM
depends on whether we are dealing with an identity gamma ramp.

[How]
In addition to the is_identity flag
a new is_logical_identity flag has been
added. The is_identity flag now denotes
whether the OS gamma is an RGB256 identity
and the new logical identity will inidicate
that the given gamma ramp regardless of its
type is identity.

Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Underflow Asserts to dc

[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.

[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.

Signed-off-by: Thomas Lim <Thomas.Lim@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move vmid determination logic out of dc

Currently vmid is decided internally inside dc. This makes it
difficult to use vmid use with external components.

This change moves vmid logic outside dc and allowing vmid to be
passed in as a parameter to DC.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove superflous error message

[Why]
VBios sometimes reports incorrect object type as encoder instead of
connector

[How]
Change error message to debug message

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up scdc_test_data struct

These are no longer needed, Also added RESERVED bits.

Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.35

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.34

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix gamma logic breaking driver unload

Using this logic breaks driver unload, this is a temporary fix
a followup patch will properly fix this

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix issue with eDP not detected on driver load

[Why]
HPD not going to be high if Panel VDD is off
And all AUX transaction will fail :(

[How]
1. Power on VDD before attempting detection if it isn't already on
2. Improve the robustness by having a retry mechanism on the
first DPCD read after VDD on. If a particular board always holds
HPD high incorrectly, the AUX access may fail, so we can retry
in those scenarios. This change would only improve logic
since it prevents AUX failure leading to bad resolution on internal
panel.
3. We should never need to re-detect internal panel, so logic
is re-arranged a bit to skip earlier.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rework CRTC color management

[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.

The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.

The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used

We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.

[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.

All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.

Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.

The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:

linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...

Now the test is doing:

linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use macro for invalid OPP ID

[WHY]
This is meant to make it clearer that 0xf is not a valid OPP ID, and
that code making use of OPP IDs should not accept this value.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add audio related regs

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add i2c_hw_Status check to make sure as HW I2c in use

1. Add i2c_hw_Status check to make sure when HW i2c is in use.
2. Don't reset HW engine in is_hw_busy() and instead do this in
process_transaction() because SW i2c does not check if hw i2c is in use

Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Dont aser if DP_DPHY_INTERNAL_CTRL

No need to assert just return

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.33

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add some math functions for dcn_calc_math

Implement floor, ceil, and fabs

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy stream updates onto streams

[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.

The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.

To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.

So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.

[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update link rate from DPCD 10

[WHY]
Some panels return a link rate of 0 (unknown) in DPCD 0. In this case,
an appropriate mode cannot be set, and certain panels will show
corruption as they are forced to use a mode they do not support.

[HOW]
Read DPCD 10 in the case where supported link rate from DPCD 0 is
unknown, and pass that value on to the reported link rate.
This re-introduces behaviour present in previous versions that appears
to have been accidentally removed.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix resource saving missing when power state switch

Signed-off-by: Tao.Huang <Tao.Huang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set default ABM level to module parameter

[Why]
The module parameter to specify the default ABM level is now defined,
so hook it up in DM.

[How]
On connector reset specify the default level. DC will program this as
part of the modeset since it gets passed onto the stream in
dm_update_crtc_state.

It's only set for eDP connectors, but it doesn't matter if this is
specified for connectors or hardware that doesn't support ABM.

It's DC's responsibility to check that ABM can be set or adjusted, and
DC does check that the DMCU firmware is running and if there's backlight
control available.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add module parameter for specifying default ABM level

[Why]
It's non trivial to configure or specify an ABM reduction level for
userspace outside of X. There is also no method to specify the default
ABM value at boot time.

A parameter should be added to configure this.

[How]
Expose a module parameter that can specify the default ABM level to
use for eDP connectors on DC enabled hardware that loads the DMCU
firmware.

The default is still disabled (0), but levels can range from 1-4. Levels
control how much the backlight can be reduced, with being the least
amount of reduction and four being the most reduction.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop the incorrect soft_reset for SRIOV

It's incorrect to do soft reset for SRIOV, when GFX
hang the WREG would stuck there becuase it goes KIQ way.

the GPU reset counter is incorrect: always increase twice
for each timedout

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add GDS clearing workaround in later init for gfx9

Since Hardware bug, GDS exist ECC error after cold boot up,
adding GDS clearing workaround in later init for gfx9.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable fast plane updates when state->allow_modeset = true

[Why]
Whenever the a modeset is allowed (but not neccessarily required) we
currently recreate all the planes in the state. Most IGT tests and
legacy IOCTLs create atomic commits with this flag set, so the pipes
are often unnecessarily reprogrammed.

Poor performance and stuttering can occur when many of these commits
are frequently issued.

This flag was needed when the appropriate conditions for checking
whether the planes needed a reset were not in place, but
should_reset_plane should cover everything needed now.

[How]
Drop the check for state->allow_modeset in should_reset_plane.

All planes on a CRTC should reset in the following conditions:
- The CRTC needs a modeset
- The CRTC degamma changes
- Planes are added or removed to the CRTC

These conditions are all covered in should_reset_plane.

We still can't drop the format change check in should_reset_plane since
fill_dc_plane_info_and_addr isn't called when validating the state, so
we can't tell if a FULL update is needed or not.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <david.francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use current connector state if NULL when checking bpc

[Why]
The old logic for checking which output depth to use relied on using
the current connector state rather than the new proposed state. This
was a problem when performing atomic commits since we weren't verifying
it against the incoming max_requested_bpc.

But switching this to only use the new state and not the current state
breaks filtering modes - it'll always assume that the maximum bpc
supported by the display is in use, which will cause certain modes
like 1440p@144Hz to be filtered even when using 8bpc.

[How]
Still use the connector->state if we aren't passed an explicit state.
This will respect the max_bpc the user currently has when filtering
modes.

Also remember to reset the default max_requested_bpc to 8 whenever
connector reset is called to retain old behavior when using the new
property.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110845
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: remove vram_page_split kernel option (v3)

This option is no longer needed.  The default code paths
are now the only option.

v2: Add HPAGE support and a default for non contiguous maps
v3: Misread 512 pages as MiB ...

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Always allocate initial connector state state

[Why]
Unlike our regular connectors, MST connectors don't start off with
an initial connector state. This causes a NULL pointer dereference to
occur when attaching the bpc property since it tries to modify the
connector state.

We need an initial connector state on the connector to avoid the crash.

[How]
Use our reset helper to allocate an initial state and reset the values
to their defaults. We were already doing this before, just not for
MST connectors.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add connector debugfs for "output_bpc"

[Why]
This will be useful for verifying whether we enter the correct output
color depth from IGT.

[How]
Locks the connector and associated CRTC if available and outputs
the current and maximum output bpc values.

Example:

cat /sys/kernel/debug/dri/0/DP-1/output_bpc
Current: 8
Maximum: 10

v2: Drop unneeded connector status check

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add RLC firmware to support raven1 refresh

Use SMU firmware version to indentify the raven1 refresh device and
then load homologous RLC FW.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Huang Rui<Ray.Huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add set_power_profile_mode for raven1_refresh

add gfxoff_state_changed_by_workload to control gfxoff
when set power_profile_mode

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Hardcode reg access using L1 security

Under Vega10 SR-IOV VF, L1 register access mode should be enabled by
default as the non-security VF will no longer be supported.

Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc

[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.

[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.

Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)

[What]
vce ring test fails consistently during resume in s3 cycle, due to
mismatch read & write pointers.
On debug/analysis its found that rptr to be compared is not being
correctly updated/read, which leads to this failure.
Below is the failure signature:
[drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed
[drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110).

[How]
fetch rptr appropriately, meaning move its read location further down
in the code flow.
With this patch applied the s3 failure is no more seen for >5k s3 cycles,
which otherwise is pretty consistent.

V2: remove reduntant fetch of rptr

Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Implement queue priority controls for gfx9

Ported from gfx8, no changes in register setup.

Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CP queue priority controls

Translate queue priority into pipe priority and write to MQDs.
The priority values are used to perform queue and pipe arbitration.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Simplify eviction state logic

Always mark evicted queues with q->properties.is_evicted = true, even
queues that are inactive for other reason. This simplifies maintaining
the eviction state as it doesn't require updating is_evicted when other
queue activation conditions change.

On the other hand, we now need to check those other queue activation
conditions whenever an evicted queues is restored. To minimize code
duplication, move the queue activation check into a macro so it can be
maintained in one central place.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fixed missing to clear some EDC count

EDC counts are related to instance and se. They are not the same
for different type of EDC. EDC clearing are changed to base on
individual EDC's instance and SE number.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add back missing hw translate init for DCN1_01

[Why]
DCN_VERSION_1_01 is no longer handled in the dal_hw_translate_init
switch since it was inadvertently dropped in the patch that removed the
unnecessary DCN1_01 guards.

This caused numerous regressions on DCN1_01 when loading the driver.

[How]
Add it back.

Fixes: 97df424fe7a7 ("drm/amd/display: Drop DCN1_01 guards")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't set mode_changed=false if the stream was removed

[Why]
When switching from vt to desktop with EDID emulation we can receive
an atomic commit such that we have a crtc where mode_changed = true.

During the dm_update_crtc_state disable pass we remove the stream from
the context and free it on the dm_new_crtc_state.

During the enable pass we compare the new provisional stream to the
dm_old_crtc_state->stream and determine that the stream is unchanged
and no scaling has been changed.

Following this, new_crtc_state->mode_changed is then set to false.
The connectors haven't changed and the CRTC active state hasn't changed
so drm_atomic_crtc_needs_modeset returns false, so we jump to
skip_modeset and we hit:

BUG_ON(dm_new_crtc_state->stream == NULL);

...since the old stream is gone from the context and the new stream is
also still NULL.

[How]
Ensure that we still a stream to reuse before checking if we can reuse
the old stream without a full modeset.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop removing BOs from the LRU v3

This avoids OOM situations when we have lots of threads
submitting at the same time.

v3: apply this to the whole driver, not just CS

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: create GDS, GWS and OA in system domain

And only move them in on validation. This allows for better control
when multiple processes are fighting over those resources.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop some validation failure messages

The messages about amdgpu_cs_list_validate are duplicated because the
caller will complain into the logs as well and we can also get
interrupted by a signal here.

Also fix the the caller to not report -EAGAIN from validation.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: udpate ta_ras interface header

ras ta interface header need to be updated to match with latest ta fw updates

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'omapdrm-5.3' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 5.3

- Add support for DSI command mode displays

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a709f57d-6909-8550-3932-d84e0b5bc3ef@ti.com

Merge tag 'du-next-20190608-2' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU changes for v5.3:

- R8A774A1 SoC support
- LVDS dual-link mode support
- Support for additional formats
- Misc fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608134652.GE4786@pendragon.ideasonboard.com

drm/omap: add support for manually updated displays

This adds the required infrastructure for manually updated displays,
such as DSI command mode panels. While those panels often support
partial updates we currently always do a full refresh.

The display will be refreshed when something calls the dirty callback,
such as libdrm's drmModeDirtyFB(). This is currently being done at least
by the kernel console and Xorg (with modesetting driver) in their
default configuration. Weston does not implement this and the fbdev
backend does not work (display will not update). Weston's DRM backend
uses double buffering and the page flip will also trigger a display
refresh.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: add framedone interrupt support

This prepares framedone interrupt handling for
manual display update support.

Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: don't check dispc timings for DSI

While most display types only forward their VM to the DISPC, this
is not true for DSI. DSI calculates the VM for DISPC based on its
own, but it's not identical. Actually the DSI VM is not even a valid
DISPC VM making this check fail. Let's restore the old behaviour
and avoid checking the DISPC VM for DSI here.

Fixes: 7c27fa57ef31 ("drm/omap: Call dispc timings check operation directly")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: use DRM_DEBUG_DRIVER instead of CORE

This macro is only used by omapdrm, which should print
debug messages using the DRIVER category instead of the
default CORE category.

Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Use dev_get_drvdata()

Using dev_get_drvdata directly.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove open-coded drm_invalid_op()

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Make sure device_id tables are NULL terminated

Make sure (of/i2c/platform)_device_id tables are NULL terminated.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm: rcar-du: Add support for missing 16-bit RGB1555 formats

Add support for the DRM_FORMAT_RGBA5551, DRM_FORMAT_RGBX5551,
DRM_FORMAT_ABGR1555, DRM_FORMAT_XBGR1555, DRM_FORMAT_BGRA5551 and
DRM_FORMAT_BGRX5551 formats to the DU driver. Those formats are only
available on Gen3.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm: rcar-du: Add support for missing 16-bit RGB4444 formats

Add support for the DRM_FORMAT_RGBA4444, DRM_FORMAT_RGBX4444,
DRM_FORMAT_ABGR4444, DRM_FORMAT_XBGR4444, DRM_FORMAT_BGRA4444 and
DRM_FORMAT_BGRX4444 formats to the DU driver. Those formats are only
available on Gen3.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm: rcar-du: Add support for missing 32-bit RGB formats

Add support for the DRM_FORMAT_RGBA8888, DRM_FORMAT_RGBX8888,
DRM_FORMAT_ABGR8888 and DRM_FORMAT_XBGR8888 formats to the DU driver.
Those formats are only available on Gen3.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode

In dual-link LVDS mode, the LVDS1 encoder is used as a companion for
LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1
can't be used in that case, don't create an encoder and connector for
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: lvds: Add support for dual-link mode

In dual-link mode the LVDS0 encoder transmits even-numbered pixels, and
sends odd-numbered pixels to the LVDS1 encoder for transmission on a
separate link.

To implement support for this mode of operation, determine if the LVDS
connection operates in dual-link mode by querying the next device in the
pipeline, locate the companion encoder, and control it directly through
its bridge operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: lvds: Remove LVDS double-enable checks

The DRM core and DU driver guarantee that the LVDS bridge will not be
double-enabled or double-disabled. Remove the corresponding unnecessary
checks.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

dt-bindings: display: renesas: lvds: Add renesas,companion property

Add a new optional renesas,companion property to point to the companion
LVDS encoder. This is used to support dual-link operation where the main
LVDS encoder splits even-numbered and odd-numbered pixels between the
two LVDS encoders.

The new property doesn't control the mode of operation, it only
describes the relationship between the master and companion LVDS
encoders.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: bridge: thc63: Report input bus mode through bridge timings

Set a drm_bridge_timings in the drm_bridge, and use it to report the
input bus mode (single-link or dual-link). The other fields of the
timings structure are kept to 0 as they do not apply to LVDS buses.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation

The THC63LVD1024 LVDS decoder can operate in two modes, single-link or
dual-link. In dual-link mode both input ports are used to carry even-
and odd-numbered pixels separately. Document this in the DT bindings,
along with the related rules governing port and usage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: bridge: Add dual_link field to the drm_bridge_timings structure

Extend the drm_bridge_timings structure with a new dual_link field to
indicate that the bridge's input bus carries data on two separate
physical links. The first use case is LVDS dual-link mode where even-
and odd-numbered pixels are transferred on separate LVDS links.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm: rcar-du: writeback: include interface header

The new writeback feature exports functions so that they can integrate
into the rcar_du_kms module.

The interface functions are defined in the rcar_du_writeback header, but
it is not included in the object file itself leading to compiler
warnings for missing prototypes.

Include the header as appropriate.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: lvds: Add r8a774a1 support

The LVDS encoders on RZ/G2M SoC is similar to R-Car M3-W. Add support for
RZ/G2M (R8A774A1) SoC to the LVDS encoder driver.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Add R8A774A1 support

Add support for the R8A774A1 DU (which is very similar to the R8A7796 DU
except that it lacks TCON and CMM); it has one RGB output, one LVDS output
and one HDMI output.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

dt-bindings: display: renesas: lvds: Document r8a774a1 bindings

Document the RZ/G2M (R8A774A1) LVDS bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

dt-bindings: display: renesas: du: Document the r8a774a1 bindings

Document the RZ/G2M (R8A774A1) SoC in the R-Car DU bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>