git.samba.org - sfrench/cifs-2.6.git/log

Merge tag 'for-v6.3-part2' of git://git./linux/kernel/git/sre/linux-power-supply

Pull more power supply updates from Sebastian Reichel:

- Fix DT binding for Richtek RT9467

- Fix a NULL pointer check in the power-supply core

- Document meaning of absent "present" property

* tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  dt-bindings: power: supply: Revise Richtek RT9467 compatible name
  ABI: testing: sysfs-class-power: Document absence of "present" property
  power: supply: fix null pointer check order in __power_supply_register

Merge tag '6.3-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull more cifs updates from Steve French:

- xfstest generic/208 fix (memory leak)

- minor netfs fix (to address smatch warning)

- a DFS fix for stable

- a reconnect race fix

- two multichannel fixes

- RDMA (smbdirect) fix

- two additional writeback fixes from David

* tag '6.3-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix memory leak in direct I/O
  cifs: prevent data race in cifs_reconnect_tcon()
  cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID
  iov: Fix netfs_extract_user_to_sg()
  cifs: Fix cifs_write_back_from_locked_folio()
  cifs: reuse cifs_match_ipaddr for comparison of dstaddr too
  cifs: match even the scope id for ipv6 addresses
  cifs: Fix an uninitialised variable
  cifs: Add some missing xas_retry() calls

umh: simplify the capability pointer logic

The usermodehelper code uses two fake pointers for the two capability
cases: CAP_BSET for reading and writing 'usermodehelper_bset', and
CAP_PI to read and write 'usermodehelper_inheritable'.

This seems to be a completely unnecessary indirection, since we could
instead just use the pointers themselves, and never have to do any "if
this then that" kind of logic.

So just get rid of the fake pointer values, and use the real pointer
values instead.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'cocci-for-6.3' of git://git./linux/kernel/git/jlawall/linux

Pull coccinelle updates from Julia Lawall:
"Changes in make coccicheck and improve a semantic patch

  This makes a couple of changes in make coccicheck related to shell
  commands.

  It also updates the api/atomic_as_refcounter semantic patch to include
  WARNING in the output message, as done in other cases"

* tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: Use /usr/bin/env
  scripts: coccicheck: Avoid warning about spurious escape
  coccinelle: api/atomic_as_refcounter: include message type in output

Merge tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux

Pull Rust fix from Miguel Ojeda:
"A single build error fix: there was a change during the merge window
  to a C header parsed by the Rust bindings generator, introducing a
  type that it does not handle well.

  The fix tells the generator to treat the type as opaque (for now)"

* tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux:
  rust: bindgen: Add `alt_instr` as opaque type

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
  soak time.

  Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
  enclosure services (ses) update (mostly bug fixes) and other minor bug
  fixes and changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
  scsi: zfcp: Trace when request remove fails after qdio send fails
  scsi: zfcp: Change the type of all fsf request id fields and variables to u64
  scsi: zfcp: Make the type for accessing request hashtable buckets size_t
  scsi: ufs: core: Simplify ufshcd_execute_start_stop()
  scsi: ufs: core: Rely on the block layer for setting RQF_PM
  scsi: core: Extend struct scsi_exec_args
  scsi: lpfc: Fix double word in comments
  scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
  scsi: core: Fix a source code comment
  scsi: cxgbi: Remove unneeded version.h include
  scsi: qedi: Remove unneeded version.h include
  scsi: mpi3mr: Remove unneeded version.h include
  scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
  scsi: mpi3mr: Use number of bits to manage bitmap sizes
  scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
  scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
  scsi: mpi3mr: Fix an issue found by KASAN
  scsi: mpi3mr: Replace 1-element array with flex-array
  scsi: ipr: Work around fortify-string warning
  scsi: ipr: Make ipr_probe_ioa_part2() return void
  ...

Merge tag 'thermal-6.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
"These fix two issues in the Intel thermal control drivers.

  Specifics:

   - Fix an error pointer dereference in the quark_dts Intel thermal
     driver (Dan Carpenter)

   - Fix the intel_bxt_pmic_thermal driver Kconfig entry to select
     REGMAP which is not user-visible instead of depending on it (Randy
     Dunlap)"

* tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
  thermal: intel: quark_dts: fix error pointer dereference

Merge tag 'acpi-6.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
"These update ACPI quirks for some x86 platforms and add an IRQ
  override quirk for one more system.

  Specifics:

   - Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
     (Vojtech Hejsek)

   - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
     any more after a firmware update (Mario Limonciello)

   - Add all Cezanne systems to the list for forcing StorageD3Enable,
     because they all need the same quirk (Mario Limonciello)"

* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
  ACPI: x86: Drop quirk for HP Elitebook
  ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA

Merge tag 'pm-6.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
"These update power capping (new hardware support and cleanup) and
  cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new
  platform).

  Specifics:

   - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter)

   - Change the log level of a message in the amd-pstate cpufreq driver
     so it is more visible to users (Kai-Heng Feng)

   - Adjust the balance_performance EPP value for Sapphire Rapids in the
     intel_pstate cpufreq driver (Srinivas Pandruvada)

   - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick
     Alcock)

   - Make a read-only kobj_type structure in the schedutil cpufreq
     governor constant (Thomas Weißschuh)

   - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
     power capping driver (Sumeet Pawnikar)"

* tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: apple-soc: Fix an IS_ERR() vs NULL check
  powercap: remove MODULE_LICENSE in non-modules
  cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC
  cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules
  cpufreq: schedutil: make kobj_type structure constant
  cpufreq: amd-pstate: Let user know amd-pstate is disabled
  cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids

Merge tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux

Pull more io_uring updates from Jens Axboe:
"Here's a set of fixes/changes that didn't make the first cut, either
  because they got queued before I sent the early merge request, or
  fixes that came in afterwards. In detail:

   - Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
     error out (David)

   - Fix for spurious poll wakeups (me)

   - Fix for a file leak for buffered reads in certain conditions
     (Joseph)

   - Don't allow registered buffers of mixed types (Pavel)

   - Improve handling of huge pages for registered buffers (Pavel)

   - Provided buffer ring size calculation fix (Wojciech)

   - Minor cleanups (me)"

* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
  io_uring/poll: don't pass in wake func to io_init_poll_iocb()
  io_uring: fix fget leak when fs don't support nowait buffered read
  io_uring/poll: allow some retries for poll triggering spuriously
  io_uring: remove MSG_NOSIGNAL from recvmsg
  io_uring/rsrc: always initialize 'folio' to NULL
  io_uring/rsrc: optimise registered huge pages
  io_uring/rsrc: optimise single entry advance
  io_uring/rsrc: disallow multi-source reg buffers
  io_uring: remove unused wq_list_merge
  io_uring: fix size calculation when registering buf ring
  io_uring/rsrc: fix a comment in io_import_fixed()
  io_uring: rename 'in_idle' to 'in_cancel'
  io_uring: consolidate the put_ref-and-return section of adding work

Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Christoph:
      - Don't access released socket during error recovery (Akinobu
        Mita)
      - Bring back auto-removal of deleted namespaces during sequential
        scan (Christoph Hellwig)
      - Fix an error code in nvme_auth_process_dhchap_challenge (Dan
        Carpenter)
      - Show well known discovery name (Daniel Wagner)
      - Add a missing endianess conversion in effects masking (Keith
        Busch)

- Fix for a regression introduced in blk-rq-qos during init in this
   merge window (Breno)

- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
   holes and shrinking it (Christophe)

- Remove redundant bdev_get_queue() NULL checks (Juhyung)

- Add sed-opal single user mode support flag (Luca)

- Remove SQE128 check in ublk as it isn't needed, saving some memory
   (Ming)

- Op specific segment checking for cloned requests (Uday)

- Exclusive open partition scan fixes (Yu)

- Loop offset/size checking before assigning them in the device (Zhong)

- Bio polling fixes (me)

* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
  blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  blk-iocost: Pass gendisk to ioc_refresh_params
  nvme: fix sparse warning on effects masking
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  loop: loop_set_status_from_info() check before assignment
  ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
  block: remove more NULL checks after bdev_get_queue()
  blk-mq: Reorder fields in 'struct blk_mq_tag_set'
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  sed-opal: add support flag for SUM in status ioctl

Merge tag 'ata-6.3-fix' of git://git./linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:

- Revert commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
   controller") as it is causing serious regressions (failure to boot)
   on some laptops

* tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"

Merge branches 'acpi-pm' and 'acpi-x86'

Merge additional ACPI quirks for x86 systems:

- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
   any more after a firmware update (Mario Limonciello).

- Add all Cezanne systems to the list for forcing StorageD3Enable,
   because they all need the same quirk (Mario Limonciello).

* acpi-pm:
  ACPI: x86: Drop quirk for HP Elitebook

* acpi-x86:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

Merge tag 's390-6.3-2' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- Add empty command line parameter handling stubs to kernel for all
   command line parameters which are handled in the decompressor. This
   avoids invalid "Unknown kernel command line parameters" messages from
   the kernel, and also avoids that these will be incorrectly passed to
   user space. This caused already confusion, therefore add the empty
   stubs

- Add missing phys_to_virt() handling to machine check handler

- Introduce and use a union to be used for zcrypt inline assemblies.
   This makes sure that only a register wide member of the union is
   passed as input and output parameter to inline assemblies, while
   usual C code uses other members of the union to access bit fields of
   it

- Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
   atomically read a 128-bit value from memory. This replaces the
   (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf
   code. Currently gcc does not generate the used lpq instruction if
   __READ_ONCE() is used for aligned 128-bit accesses, therefore use
   this s390 specific helper

- Simplify machine check handler code if a task needs to be killed
   because of e.g. register corruption due to a machine malfunction

- Perform CPU reset to clear pending interrupts and TLB entries on an
   already stopped target CPU before delegating work to it

- Generate arch/s390/boot/vmlinux.map link map for the decompressor,
   when CONFIG_VMLINUX_MAP is enabled for debugging purposes

- Fix segment type handling for dcssblk devices. It incorrectly always
   returned type "READ/WRITE" even for read-only segements, which can
   result in a kernel panic if somebody tries to write to a read-only
   device

- Sort config S390 select list again

- Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
   test

* tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kprobes: fix current_kprobe never cleared after kprobes reenter
  s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
  s390/Kconfig: sort config S390 select list again
  s390/extmem: return correct segment type in __segment_load()
  s390/decompressor: add link map saving
  s390/smp: perform cpu reset before delegating work to target cpu
  s390/mcck: cleanup user process termination path
  s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg
  s390/rwonce: add READ_ONCE_ALIGNED_128() macro
  s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
  s390/nmi: fix virtual-physical address confusion
  s390/setup: do not complain about parameters handled in decompressor

Merge tag 'riscv-for-linus-6.3-mw2' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- Some cleanups and fixes for the Zbb-optimized string routines

- Support for custom (vendor or implementation defined) perf events

- COMMAND_LINE_SIZE has been increased to 1024

* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Bump COMMAND_LINE_SIZE value to 1024
  drivers/perf: RISC-V: Allow programming custom firmware events
  riscv, lib: Fix Zbb strncmp
  RISC-V: improve string-function assembly

Merge branch 'powercap'

Merge additional power capping changes for 6.3-rc1:

- Remove MODULE_LICENSE from non-modular power capping code (Nick
   Alcock).

- Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
   power capping driver (Sumeet Pawnikar).

* powercap:
  powercap: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC

Merge tag 'rtc-6.3' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"A few drivers got some nice cleanups and a new driver are making the
  bulk of the changes.

  Subsystem:
   - allow rtc_read_alarm without read_alarm callback

  New driver:
   - NXP BBNSM module RTC

  Drivers:
   - use IRQ flags from fwnode when available
   - abx80x: nvmem support
   - brcmstb-waketimer: add non-wake alarm support
   - ingenic: provide CLK32K clock
   - isl12022: cleanups
   - moxart: switch to using gpiod API
   - pcf85363: allow setting quartz load
   - pm8xxx: cleanups and support for setting time
   - rv3028, rv3032: add ACPI support"

* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
  rtc: pm8xxx: add support for nvmem offset
  dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
  rtc: abx80x: Add nvmem support
  rtc: rx6110: Remove unused of_gpio,h
  rtc: efi: Avoid spamming the log on RTC read failure
  rtc: isl12022: sort header inclusion alphabetically
  rtc: isl12022: Join string literals back
  rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
  rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
  rtc: isl12022: Get rid of unneeded private struct isl12022
  rtc: pcf85363: add support for the quartz-load-femtofarads property
  dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
  rtc: allow rtc_read_alarm without read_alarm callback
  rtc: rv3032: add ACPI support
  rtc: rv3028: add ACPI support
  rtc: bbnsm: Add the bbnsm rtc support
  rtc: jz4740: Register clock provider for the CLK32K pin
  rtc: jz4740: Use dev_err_probe()
  rtc: jz4740: Use readl_poll_timeout
  dt-bindings: rtc: Add #clock-cells property
  ...

ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"

Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

blk-mq: enforce op-specific segment limits in blk_insert_cloned_request

The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.

blk_insert_cloned_request: over max segments limit. (256 > 129)

Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"fbdev:
   - fix uninit var in error path

  shmem:
   - revert unGPLing an export

  i915:
   - Don't use stolen memory or BAR mappings for ring buffers with LLC
   - Add inverted backlight quirk for HP 14-r206nv
   - Fix GSI offset for MCR lookups
   - GVT fixes (memleak, debugfs attributes, kconfig, typos)

  amdgpu:
   - SMU 13 fixes
   - Enable TMZ for GC 10.3.6
   - Misc display fixes
   - Buddy allocator fixes
   - GC 11 fixes
   - S0ix fix
   - INFO IOCTL queries for GC 11
   - VCN harvest fixes for SR-IOV
   - UMC 8.10 RAS fixes
   - Don't restrict bpc to 8
   - NBIO 7.5 fix
   - Allow freesync on PCon for more devices

  amdkfd:
   - SDMA fix
   - Illegal memory access fix"

* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
  drm/amdgpu/vcn: fix compilation issue with legacy gcc
  drm/amd/display: Extend Freesync over PCon support for more devices
  Revert "drm/amd/display: Do not set DRR on pipe commit"
  drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
  drm/amd/display: Ext displays with dock can't recognized after resume
  drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
  drm/amdgpu: remove unused variable ring
  drm/amd/display: fix dm irq error message in gpu recover
  drm/amd: Fix initialization for nbio 7.5.1
  drm/amd/display: Don't restrict bpc to 8 bpc
  drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
  drm/radeon: Fix eDP for single-display iMac11,2
  drm/shmem-helper: Revert accidental non-GPL export
  drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
  drm/amd/pm: downgrade log level upon SMU IF version mismatch
  drm/amdgpu: Add ecc info query interface for umc v8_10
  drm/amdgpu: Add convert_error_address function for umc v8_10
  drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
  drm/amdgpu: change default behavior of bad_page_threshold parameter
  drm/amdgpu: exclude duplicate pages from UMC RAS UE count
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- In copy_highpage(), only reset the tag of the destination pointer if
   KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
   with KASAN_SW_TAGS (which relies on top-byte-ignore).

- Remove warning if SME is detected without SVE, the kernel can cope
   with such configuration (though none in the field currently).

- In cfi_handler(), pass the ESR_EL1 value to die() for consistency
   with other die() callers.

- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
   manipulation from the generic vmemmap_remap_pte() does not follow the
   required ARM break-before-make sequence (clear the pte, flush the
   TLBs, set the new pte). It may be re-enabled once this sequence is
   sorted.

- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
   and conduit checks fail.

- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
  -falign-functions=N with -Os.

- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
   randomisation would actually take place.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
  arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
  arm64: acpi: Fix possible memory leak of ffh_ctxt
  arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  arm64: pass ESR_ELx to die() of cfi_handler
  arm64/fpsimd: Remove warning for SME without SVE
  arm64: Reset KASAN tag in copy_highpage with HW tags only

Merge tag 'amd-drm-fixes-6.3-2023-03-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.3-2023-03-02:

amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices

amdkfd:
- SDMA fix
- Illegal memory access fix

radeon:
- Display fix for iMac11,2

UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-02-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com

Merge tag 'drm-misc-next-fixes-2023-02-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Fixes uninitialized variables in fbdev error paths and reverts an
SHMEM-helper symbol back to being exported as GPL.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g

rust: bindgen: Add `alt_instr` as opaque type

To address this build error:

    BINDGEN rust/bindings/bindings_generated.rs
    BINDGEN rust/bindings/bindings_helpers_generated.rs
    EXPORTS rust/exports_core_generated.h
    RUSTC P rust/libmacros.so
    RUSTC L rust/compiler_builtins.o
    RUSTC L rust/alloc.o
    RUSTC L rust/bindings.o
    RUSTC L rust/build_error.o
    EXPORTS rust/exports_alloc_generated.h
  error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
       --> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10094:1
        |
  10094 | / pub struct alt_instr {
  10095 | |     pub instr_offset: s32,
  10096 | |     pub repl_offset: s32,
  10097 | |     pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
  10098 | |     pub instrlen: u8_,
  10099 | |     pub replacementlen: u8_,
  10100 | | }
        | |_^
        |
  note: `alt_instr__bindgen_ty_1__bindgen_ty_1` has a `#[repr(align)]` attribute
       --> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10111:1
        |
  10111 | / pub struct alt_instr__bindgen_ty_1__bindgen_ty_1 {
  10112 | |     pub _bitfield_1: __BindgenBitfieldUnit<[u8; 4usize], u16>,
  10113 | | }
        | |_^
  note: `alt_instr` contains a field of type `alt_instr__bindgen_ty_1`
       --> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10097:9
        |
  10097 |     pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
        |         ^^^^^^^^^^^^^^^^
  note: ...which contains a field of type `alt_instr__bindgen_ty_1__bindgen_ty_1`
       --> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10104:9
        |
  10104 |     pub __bindgen_anon_1: alt_instr__bindgen_ty_1__bindgen_ty_1,
        |         ^^^^^^^^^^^^^^^^

  error: aborting due to previous error

  For more information about this error, try `rustc --explain E0588`.
  make[1]: *** [rust/Makefile:389: rust/bindings.o] Error 1
  make: *** [Makefile:1293: prepare] Error 2

Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

Merge tag 'linux-watchdog-6.3-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- qcom-wdt dt-bindings improvements and additions (like MSM8994 and
   MDM9615)

- mtk_wdt: Add reset_by_toprgu support

- devm_clk_get_enabled() helper changes

- Fix kmemleak in watchdog_cdev_register

- watchdog sysfs improvements

- Other fixes and small improvements

* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
  watchdog: at91rm9200: Only warn once about problems in .remove()
  watchdog: mt7621-wdt: avoid ralink architecture dependent code
  watchdog: mt7621-wdt: avoid static global declarations
  dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
  watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
  dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
  watchdog: report options in sysfs
  watchdog: report fw_version in sysfs
  dt-bindings: watchdog: fsl-imx: document suspend in wait mode
  watchdog: imx2_wdg: suspend watchdog in WAIT mode
  watchdog: pcwd_usb: Fix attempting to access uninitialized memory
  dt-bindings: watchdog: qcom-wdt: merge MSM timer
  dt-bindings: watchdog: qcom-wdt: allow interrupts
  dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
  dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
  dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
  dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
  watchdog: Fix kmemleak in watchdog_cdev_register
  watchdog: Include <linux/kstrtox.h> when appropriate
  watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
  ...

Merge tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Two small fixes from Xiubo and myself, marked for stable"

* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
ceph: update the time stamps and try to drop the suid/sgid

Merge tag 'mips_6.3_1' of git://git./linux/kernel/git/mips/linux

Pull more MIPS updates from Thomas Bogendoerfer:
"A few more cleanups and fixes"

* tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Workaround clang inline compat branch issue
  mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
  mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'
  mips: ralink: make SOC_MT7621 select PINCTRL
  mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
  MIPS: cevt-r4k: Offset the value used to clear compare interrupt
  MIPS: smp-cps: Don't rely on CP0_CMGCRBASE
  MIPS: Remove DMA_PERDEV_COHERENT

Merge tag 'objtool-core-2023-03-02' of git://git./linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

- Shrink 'struct instruction', to improve objtool performance & memory
   footprint

- Other maximum memory usage reductions - this makes the build both
   faster, and fixes kernel build OOM failures on allyesconfig and
   similar configs when they try to build the final (large) vmlinux.o

- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
   single-byte instruction (PUSH/POP or LEAVE). This requires the
   extension of the ORC metadata structure with a 'signal' field

- Misc fixes & cleanups

* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  objtool: Fix ORC 'signal' propagation
  objtool: Remove instruction::list
  x86: Fix FILL_RETURN_BUFFER
  objtool: Fix overlapping alternatives
  objtool: Union instruction::{call_dest,jump_table}
  objtool: Remove instruction::reloc
  objtool: Shrink instruction::{type,visited}
  objtool: Make instruction::alts a single-linked list
  objtool: Make instruction::stack_ops a single-linked list
  objtool: Change arch_decode_instruction() signature
  x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
  x86/unwind/orc: Add 'signal' field to ORC metadata
  objtool: Optimize layout of struct special_alt
  objtool: Optimize layout of struct symbol
  objtool: Allocate multiple structures with calloc()
  objtool: Make struct check_options static
  objtool: Make struct entries[] static and const
  objtool: Fix HOSTCC flag usage
  objtool: Properly support make V=1
  objtool: Install libsubcmd in build
  ...

Merge tag 'auxdisplay-6.3' of https://github.com/ojeda/linux

Pull auxdisplay fix from Miguel Ojeda:

- hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie)

* tag 'auxdisplay-6.3' of https://github.com/ojeda/linux:
auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()

Merge tag 'driver-core-6.3-rc1_2' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here is another small set of driver core patches.

  They resolve some reported problems with the previous driver core
  patches that are in your tree.

  They solve a problem with the bus_type cleanup as reported and fixed
  by Geert, and two fw_devlink changes to make debugging problems
  easier.

  There is one known outstanding problem with the fw_deflink changes in
  your tree that is still being worked on, and it looks like a clk core
  change will be submitted soon for that, probably after 6.3-rc1.

  All three of these have been in linux-next with no reported problems
  (only reports that they fixed problems)"

* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: fw_devlink: Print full path and name of fwnode
  driver core: fw_devlink: Avoid spurious error message
  driver core: bus: Handle early calls to bus_to_subsys()

Merge tag 'spi-fix-v6.3' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A small set of fixes for SPI drivers, Krishna has been doing a bunch
  of work on Tegra210 QuadSPI and found a bunch of issues there and
  there's a couple of small fixes for other drivers too"

* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra210-quad: Fix iterator outside loop
  spi: tegra210-quad: Fix validate combined sequence
  spi: tegra210-quad: set half duplex flag
  spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
  spi: cadence-quadspi: Fix cancel the indirect read mask

Merge tag 'regulator-fix-v6.3' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"Two fixes here, one driver fix for incorrect error codes and a fix in
  the core to use ktime_get_boottime() in order to fix accounting of the
  time regulators have been powered down over suspend. ktime_get()
  pauses over suspend which is not what we want"

* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
  regulator: max597x: Fix error return code in max597x_get_status

s390/kprobes: fix current_kprobe never cleared after kprobes reenter

Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".

Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.

Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

watchdog: at91rm9200: Only warn once about problems in .remove()

The single difference between returning 0 and returning an error code in
a platform remove callback is that in the latter case the platform core
emits a warning about the error being ignored.

at91wdt_remove() already emits a warning in the error case, so suppress
the more generic (and less helpful) one by returning 0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

watchdog: mt7621-wdt: avoid ralink architecture dependent code

MT7621 SoC has a system controller node. Watchdog need to access to reset
status register. Ralink architecture and related driver are old and from
the beggining they are using some architecture dependent operations for
accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
header file. However this is not ideal from a driver perspective which can
just access to the system controller registers in an arch independent way
using regmap syscon APIs. Update Kconfig accordingly to select new added
dependencies and allow driver to be compile tested.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

watchdog: mt7621-wdt: avoid static global declarations

Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the
code.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com
[groeck: unsigned -> unsigned int]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers

MT7621 SoC provides a system controller node for accessing to some registers.
Add a phandle in this node to avoid using MIPS related arch operations and
includes in watchdog driver code.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drm/amdgpu/vcn: fix compilation issue with legacy gcc

This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {

Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Extend Freesync over PCon support for more devices

[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.

[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Do not set DRR on pipe commit"

This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.

[Why & How]
Original change causes a regression. Revert
until fix is available.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes

[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:

shift exponent 4294966273 is too large for 32-bit type 'int'

[HOW]

In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ext displays with dock can't recognized after resume

[Why]
Needs to set the default value of the LTTPR timeout after resume.

[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini

The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.

[  489.885525] Call Trace:
[  489.885525]  <TASK>
[  489.885526]  amdttm_bo_put+0x34/0x50 [amdttm]
[  489.885529]  amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[  489.885620]  psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[  489.885720]  psp_hw_fini+0xce/0x170 [amdgpu]
[  489.885815]  amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[  489.885960]  ? blocking_notifier_chain_unregister+0x56/0xb0
[  489.885962]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[  489.886049]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[  489.886132]  ? __pm_runtime_resume+0x60/0x90
[  489.886134]  pci_device_remove+0x3e/0xb0
[  489.886135]  __device_release_driver+0x1ab/0x2a0
[  489.886137]  driver_detach+0xf3/0x140
[  489.886138]  bus_remove_driver+0x6c/0xf0
[  489.886140]  driver_unregister+0x31/0x60
[  489.886141]  pci_unregister_driver+0x40/0x90
[  489.886142]  amdgpu_exit+0x15/0x451 [amdgpu]

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable ring

building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
  ‘ring’ set but not used [-Werror=unused-but-set-variable]
   81 |         struct amdgpu_ring *ring;
      |                             ^~~~

ring is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dm irq error message in gpu recover

[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.

  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3

[How]
Defer the initialization of num_types to eliminate the error logs.

Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix initialization for nbio 7.5.1

A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.

Ensure that they're set during initialization.

Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/display: Don't restrict bpc to 8 bpc

This will let us pass the kms_hdr.bpc_switch IGT
test.

The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.

Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")

This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.

v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable

Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix eDP for single-display iMac11,2

Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.

Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.

This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

riscv: Bump COMMAND_LINE_SIZE value to 1024

Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.

There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports. That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

cifs: Fix memory leak in direct I/O

When __cifs_readv() and __cifs_writev() extract pages from a user-backed
iterator into a BVEC-type iterator, they set ->bv_need_unpin to note
whether they need to unpin the pages later. However, in both cases they
examine the BVEC-type iterator and not the source iterator - and so
bv_need_unpin doesn't get set and the pages are leaked.

I think this may be responsible for the generic/208 xfstest failing
occasionally with:

WARNING: CPU: 0 PID: 3064 at mm/gup.c:218 try_grab_page+0x65/0x100
RIP: 0010:try_grab_page+0x65/0x100
follow_page_pte+0x1a7/0x570
__get_user_pages+0x1a2/0x650
__gup_longterm_locked+0xdc/0xb50
internal_get_user_pages_fast+0x17f/0x310
pin_user_pages_fast+0x46/0x60
iov_iter_extract_pages+0xc9/0x510
? __kmalloc_large_node+0xb1/0x120
? __kmalloc_node+0xbe/0x130
netfs_extract_user_iter+0xbf/0x200 [netfs]
__cifs_writev+0x150/0x330 [cifs]
vfs_write+0x2a8/0x3c0
ksys_pwrite64+0x65/0xa0

with the page refcount going negative. This is less unlikely than it seems
because the page is being pinned, not simply got, and so the refcount
increased by 1024 each time, and so only needs to be called around ~2097152
for the refcount to go negative.

Further, the test program (aio-dio-invalidate-failure) uses a 32MiB static
buffer and all the PTEs covering it refer to the same page because it's
never written to.

The warning in try_grab_page():

if (WARN_ON_ONCE(folio_ref_count(folio) <= 0))
return -ENOMEM;

then trips and prevents us ever using the page again for DIO at least.

Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Link: https://lore.kernel.org/r/CAH2r5mvaTsJ---n=265a4zqRA7pP+o4MJ36WCQUS6oPrOij8cw@mail.gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: prevent data race in cifs_reconnect_tcon()

Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon(). It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.

Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID

Do not map STATUS_OBJECT_NAME_INVALID to -EREMOTE under non-DFS
shares, or 'nodfs' mounts or CONFIG_CIFS_DFS_UPCALL=n builds.
Otherwise, in the slow path, get a referral to figure out whether it
is an actual DFS link.

This could be simply reproduced under a non-DFS share by running the
following

  $ mount.cifs //srv/share /mnt -o ...
  $ cat /mnt/$(printf '\U110000')
  cat: '/mnt/'$'\364\220\200\200': Object is remote

Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
CC: stable@vger.kernel.org # 6.2
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

iov: Fix netfs_extract_user_to_sg()

Fix the loop check in netfs_extract_user_to_sg() for extraction from
user-backed iterators to do the body if npages > 0, not if npages < 0
(which it can never be).

This isn't currently used by cifs, which only ever extracts data from BVEC,
KVEC and XARRAY iterators at this level, user-backed iterators having being
decanted into BVEC iterators at a higher level to accommodate the work
being done in a kernel thread.

Found by smatch:
fs/netfs/iterator.c:139 netfs_extract_user_to_sg() warn: unsigned 'npages' is never less than zero.

Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302261115.P3TQi1ZO-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y/yYnAhoAYDBKixX@kili
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix cifs_write_back_from_locked_folio()

cifs_write_back_from_locked_folio() should return the number of bytes read,
but returns the result of ->async_writev(), which will be 0 on success. As
it happens, this doesn't prevent cifs_writepages_region() from working as
it will then examine and ignore the pages that are no longer dirty rather
than just skipping over them.

Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: reuse cifs_match_ipaddr for comparison of dstaddr too

We have two pieces of code that does pretty much the same
comparison. This change reuses cifs_match_ipaddr within
match_address.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: match even the scope id for ipv6 addresses

match_address function matches the scope id for ipv6 addresses,
but cifs_match_ipaddr (which is another function used for comparison)
does not use scope id. Doing so with this change.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Fix an uninitialised variable

Fix an uninitialised variable introduced in cifs.

Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-rdma@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: Add some missing xas_retry() calls

The xas_for_each loops added into fs/cifs/file.c need to go round again if
indicated by xas_retry().

Fixes: b8713c4dbfa3 ("cifs: Add some helper functions")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

drivers/perf: RISC-V: Allow programming custom firmware events

Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'nfsd-6.3-1' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Make new GSS Kerberos Kunit tests work on non-x86 platforms

* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Properly terminate test case arrays
SUNRPC: Let Kunit tests run with some enctypes compiled out

s390/Kconfig: sort config S390 select list again

Keep the config S390 select list sorted.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/extmem: return correct segment type in __segment_load()

Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.

As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.

Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.

Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

power: supply: qcom_battmgr: remove bogus do_div()

The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.

On 32-bit arm, do_div() causes a compile-time warning here:

    include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
      238 |   __rem = __div64_32(&(n), __base); \
          |                      ^~~~
          |                      |
          |                      unsigned int *
    drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
     1130 |    do_div(battmgr->status.percent, 100);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpufreq: apple-soc: Fix an IS_ERR() vs NULL check

The of_iomap() function returns NULL if it fails. It never returns
error pointers. Fix the check accordingly.

Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

thermal: intel: quark_dts: fix error pointer dereference

If alloc_soc_dts() fails, then we can just return. Trying to free
"soc_dts" will lead to an Oops.

Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.

It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.

It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

capability: just use a 'u64' instead of a 'u32[2]' array

Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words.  It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.

That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more.  And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation.  It's a lose-lose
situation.

So just change the 'u32[2]' into a 'u64' and be done with it.

We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).

So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.

This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently.  By just using a saner data structure, it went from

unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;

to just being

return a.val == b.val;

instead.  Which is rather more obvious both to humans and to compilers.

Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'sh-for-v6.3-tag1' of git://git./linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:

- regression fix in connection with the rtl8169 driver on SuperH boards
   that was introduced when the driver was switched to use
   devm_clk_get_optional_enabled() to simplify the code (Geert
   Uytterhoeven)

- build warning fix to allow the kernel to be built with CONFIG_WERROR
   enabled (Michael Karcher)

* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: clk: Fix clk_enable() to return 0 on NULL clk
  sh: intc: Avoid spurious sizeof-pointer-div warning

Merge tag 'loongarch-6.3' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

- Make -mstrict-align configurable

- Add kernel relocation and KASLR support

- Add single kernel image implementation for kdump

- Add hardware breakpoints/watchpoints support

- Add kprobes/kretprobes/kprobes_on_ftrace support

- Add LoongArch support for some selftests.

* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
  selftests/ftrace: Add LoongArch kprobe args string tests support
  selftests/seccomp: Add LoongArch selftesting support
  tools: Add LoongArch build infrastructure
  samples/kprobes: Add LoongArch support
  LoongArch: Mark some assembler symbols as non-kprobe-able
  LoongArch: Add kprobes on ftrace support
  LoongArch: Add kretprobes support
  LoongArch: Add kprobes support
  LoongArch: Simulate branch and PC* instructions
  LoongArch: ptrace: Add hardware single step support
  LoongArch: ptrace: Add function argument access API
  LoongArch: ptrace: Expose hardware breakpoints to debuggers
  LoongArch: Add hardware breakpoints/watchpoints support
  LoongArch: kdump: Add crashkernel=YM handling
  LoongArch: kdump: Add single kernel image implementation
  LoongArch: Add support for kernel address space layout randomization (KASLR)
  LoongArch: Add support for kernel relocation
  LoongArch: Add la_abs macro implementation
  LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
  LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
  ...

Merge tag 'uml-for-linus-6.3-rc1' of git://git./linux/kernel/git/uml/linux

Pull UML updates from Richard Weinberger:

- Add support for rust (yay!)

- Add support for LTO

- Add platform bus support to virtio-pci

- Various virtio fixes

- Coding style, spelling cleanups

* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
  Documentation: rust: Fix arch support table
  uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
  um: virt-pci: properly remove PCI device from bus
  um: virtio_uml: move device breaking into workqueue
  um: virtio_uml: mark device as unregistered when breaking it
  um: virtio_uml: free command if adding to virtqueue failed
  UML: define RUNTIME_DISCARD_EXIT
  virt-pci: add platform bus support
  um-virt-pci: Make max delay configurable
  um: virt-pci: implement pcibios_get_phb_of_node()
  um: Support LTO
  um: put power options in a menu
  um: Use CFLAGS_vmlinux
  um: Prevent building modules incompatible with MODVERSIONS
  um: Avoid pcap multiple definition errors
  um: Make the definition of cpu_data more compatible
  x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
  rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
  rust: arch/um: Disable FP/SIMD instruction to match x86
  rust: arch/um: Use 'pie' relocation mode under UML
  ...

io_uring/poll: don't pass in wake func to io_init_poll_iocb()

We only use one, and it's io_poll_wake(). Hardwire that in the initial
init, as well as in __io_queue_proc() if we're setting up for double
poll.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'ubifs-for-linus-6.3-rc1' of git://git./linux/kernel/git/rw/ubifs

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
"JFFS2:
   - Fix memory corruption in error path
   - Spelling and coding style fixes

  UBI:
   - Switch to BLK_MQ_F_BLOCKING in ubiblock
   - Wire up partent device (for sysfs)
   - Multiple UAF bugfixes
   - Fix for an infinite loop in WL error path

  UBIFS:
   - Fix for multiple memory leaks in error paths
   - Fixes for wrong space accounting
   - Minor cleanups
   - Spelling and coding style fixes"

* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
  ubi: block: Fix a possible use-after-free bug in ubiblock_create()
  ubifs: make kobj_type structures constant
  mtd: ubi: block: wire-up device parent
  mtd: ubi: wire-up parent MTD device
  ubi: use correct names in function kernel-doc comments
  ubi: block: set BLK_MQ_F_BLOCKING
  jffs2: Fix list_del corruption if compressors initialized failed
  jffs2: Use function instead of macro when initialize compressors
  jffs2: fix spelling mistake "neccecary"->"necessary"
  ubifs: Fix kernel-doc
  ubifs: Fix some kernel-doc comments
  UBI: Fastmap: Fix kernel-doc
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix permission display of the debugfs files
  ...

Merge tag '9p-6.3-for-linus-part1' of git://git./linux/kernel/git/ericvh/v9fs

Pull 9p updates from Eric Van Hensbergen:

- some fixes and cleanup setting up for a larger set of performance
   patches I've been working on

- a contributed fixes relating to 9p/rdma

- some contributed fixes relating to 9p/xen

* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: fix error reporting in v9fs_dir_release
  net/9p: fix bug in client create for .L
  9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
  9p/xen: fix connection sequence
  9p/xen: fix version parsing
  fs/9p: Expand setup of writeback cache to all levels
  net/9p: Adjust maximum MSIZE to account for p9 header

Merge tag 'jfs-6.3' of https://github.com/kleikamp/linux-shaggy

Pull jfs update from Dave Kleikamp:
"Just one simple sanity check"

* tag 'jfs-6.3' of https://github.com/kleikamp/linux-shaggy:
fs/jfs: fix shift exponent db_agl2size negative

Merge tag 'exfat-for-6.3-rc1' of git://git./linux/kernel/git/linkinjeon/exfat

Pull exfat updates from Namjae Jeon:

- Handle vendor extension and allocation entries as unrecognized benign
   secondary entries

- Fix wrong ->i_blocks on devices with non-512 byte sector

- Add the check to avoid returning -EIO from exfat_readdir() at current
   position exceeding the directory size

- Fix a bug that reach the end of the directory stream at a position
   not aligned with the dentry size

- Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number

- Two cleanup fixes and fix cluster leakage in error handling

* tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix the newly allocated clusters are not freed in error handling
  exfat: don't print error log in normal case
  exfat: remove unneeded code from exfat_alloc_cluster()
  exfat: handle unreconized benign secondary entries
  exfat: fix inode->i_blocks for non-512 byte sector size device
  exfat: redefine DIR_DELETED as the bad cluster number
  exfat: fix reporting fs error when reading dir beyond EOF
  exfat: fix unexpected EOF while reading dir

Merge tag 'nvme-6.3-2022-03-01' of git://git.infradead.org/nvme into for-6.3/block

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.3

- don't access released socket during error recovery (Akinobu Mita)
- bring back auto-removal of deleted namespaces during sequential scan
   (Christoph Hellwig)
- fix an error code in nvme_auth_process_dhchap_challenge
   (Dan Carpenter)
- show well known discovery name (Daniel Wagner)
- add a missing endianess conversion in effects masking (Keith Busch)"

* tag 'nvme-6.3-2022-03-01' of git://git.infradead.org/nvme:
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  nvme: fix sparse warning on effects masking

riscv, lib: Fix Zbb strncmp

The Zbb optimized strncmp has two parts; a fast path that does XLEN/8B
per iteration, and a slow that does one byte per iteration.

The idea is to compare aligned XLEN chunks for most of strings, and do
the remainder tail in the slow path.

The Zbb strncmp has two issues in the fast path:

Incorrect remainder handling (wrong compare): Assume that the string
length is 9. On 64b systems, the fast path should do one iteration,
and one iteration in the slow path. Instead, both were done in the
fast path, which lead to incorrect results. An example:

strncmp("/dev/vda", "/dev/", 5);

Correct by changing "bgt" to "bge".

Missing NULL checks in the second string: This could lead to incorrect
results for:

strncmp("/dev/vda", "/dev/vda\0", 8);

Correct by adding an additional check.

Fixes: b6fcdb191e36 ("RISC-V: add zbb support to string functions")
Suggested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230228184211.1585641-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'xfs-6.3-merge-4' of git://git./fs/xfs/xfs-linux

Pull moar xfs updates from Darrick Wong:
"This contains a fix for a deadlock in the allocator. It continues the
  slow march towards being able to offline AGs, and it refactors the
  interface to the xfs allocator to be less indirection happy.

  Summary:

   - Fix a deadlock in the free space allocator due to the AG-walking
     algorithm forgetting to follow AG-order locking rules

   - Make the inode allocator prefer existing free inodes instead of
     failing to allocate new inode chunks when free space is low

   - Set minleft correctly when setting allocator parameters for bmap
     changes

   - Fix uninitialized variable access in the getfsmap code

   - Make a distinction between active and passive per-AG structure
     references. For now, active references are taken to perform some
     work in an AG on behalf of a high level operation; passive
     references are used by lower level code to finish operations
     started by other threads. Eventually this will become part of
     online shrink

   - Split out all the different allocator strategies into separate
     functions to move us away from design antipattern of filling out a
     huge structure for various differentish things and issuing a single
     function multiplexing call

   - Various cleanups in the filestreams allocator code, which we might
     very well want to deprecate instead of continuing

   - Fix a bug with the agi rotor code that was introduced earlier in
     this series"

* tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
  xfs: restore old agirotor behavior
  xfs: fix uninitialized variable access
  xfs: refactor the filestreams allocator pick functions
  xfs: return a referenced perag from filestreams allocator
  xfs: pass perag to filestreams tracing
  xfs: use for_each_perag_wrap in xfs_filestream_pick_ag
  xfs: track an active perag reference in filestreams
  xfs: factor out MRU hit case in xfs_filestream_select_ag
  xfs: remove xfs_filestream_select_ag() longest extent check
  xfs: merge new filestream AG selection into xfs_filestream_select_ag()
  xfs: merge filestream AG lookup into xfs_filestream_select_ag()
  xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c
  xfs: use xfs_bmap_longest_free_extent() in filestreams
  xfs: get rid of notinit from xfs_bmap_longest_free_extent
  xfs: factor out filestreams from xfs_bmap_btalloc_nullfb
  xfs: convert trim to use for_each_perag_range
  xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker
  xfs: move the minimum agno checks into xfs_alloc_vextent_check_args
  xfs: fold xfs_alloc_ag_vextent() into callers
  xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno()
  ...

Merge tag 'i3c/for-6.3' of git://git./linux/kernel/git/i3c/linux

Pull i3c updates from Alexandre Belloni:
"Subsystem:
   - transfer pid from boardinfo to device info

  Drivers:
   - dw-i3c-master: stop hardcoding initial speed"

* tag 'i3c/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: stop hardcoding initial speed
  i3c: transfer pid from boardinfo to device info

Merge tag 'docs-6.3-2' of git://git.lwn.net/linux

Pull Documentation stragglers from Jonathan Corbet:
"A handful of documentation patches that were ready before the merge
  window, but which I didn't get merged for the first round:

   - A recommendation from Thorsten (also akpm) on use of Link tags to
     point out problem reports

   - Some front-page formatting tweaks

   - Another Spanish translation

   - One typo(ish) fix"

* tag 'docs-6.3-2' of git://git.lwn.net/linux:
  docs: recommend using Link: whenever using Reported-by:
  Documentation: front page: use recommended heading adornments
  docs/sp_SP: Add process programming-language translation
  docs: locking: refer to the actual existing config names

i3c: master: dw: stop hardcoding initial speed

Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.

Tested: tested with an i3c sensor and captured with a logic analyzer.

Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

MIPS: Workaround clang inline compat branch issue

Clang is unable to handle the situation that a chunk of inline
assembly ends with a compat branch instruction and then compiler
generates another control transfer instruction immediately after
this compat branch. The later instruction will end up in forbidden
slot and cause exception.

Workaround by add a option to control the use of compact branch.
Currently it's selected by CC_IS_CLANG and hopefully we can change
it to a version check in future if clang manages to fix it.

Fix boot on boston board.

Link: https://github.com/llvm/llvm-project/issues/61045
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: dts: ralink: mt7621: add phandle to system controller node for watchdog

To allow to access system controller registers from watchdog driver code
add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
operations in driver code.

Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'

Watchdog nodes must use 'watchdog' for node name. When a 'make dtbs_check'
is performed the following warning appears:

wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$'

Fix this warning up properly renaming the node into 'watchdog'.

Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

powercap: remove MODULE_LICENSE in non-modules

Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules

Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: x86: Drop quirk for HP Elitebook

There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.

This was due to a bug with WCN6855 WLAN firmware interaction with
the system.

This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Remove the quirk as it's no longer necessary with this firmware.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'pwm/for-6.3-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
  improvements.

  The AB8500 driver gained support for reading the initial hardware
  state and the Synopsys DesignWare driver received some work to prepare
  for device tree and platform support"

* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: dwc: Use devm_pwmchip_add()
  pwm: dwc: Move memory allocation to own function
  pwm: dwc: Change &pci->dev to dev in probe
  dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
  pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
  pwm: ab8500: Implement .get_state()
  pwm: ab8500: Fix calculation of duty and period
  pwm: lp3943: Drop unused i2c include
  dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
  pwm: stm32-lp: fix the check on arr and cmp registers update
  pwm: Move pwm_capture() dummy to restore order
  pwm: sifive: Always let the first pwm_apply_state succeed

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
"Improve performance for ext4 by allowing multiple process to perform
  direct I/O writes to preallocated blocks by using a shared inode lock
  instead of taking an exclusive lock.

  In addition, multiple bug fixes and cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix incorrect options show of original mount_opt and extend mount_opt2
  ext4: Fix possible corruption when moving a directory
  ext4: init error handle resource before init group descriptors
  ext4: fix task hung in ext4_xattr_delete_inode
  jbd2: fix data missing when reusing bh which is ready to be checkpointed
  ext4: update s_journal_inum if it changes after journal replay
  ext4: fail ext4_iget if special inode unallocated
  ext4: fix function prototype mismatch for ext4_feat_ktype
  ext4: remove unnecessary variable initialization
  ext4: fix inode tree inconsistency caused by ENOMEM
  ext4: refuse to create ea block when umounted
  ext4: optimize ea_inode block expansion
  ext4: remove dead code in updating backup sb
  ext4: dio take shared inode lock when overwriting preallocated blocks
  ext4: don't show commit interval if it is zero
  ext4: use ext4_fc_tl_mem in fast-commit replay path
  ext4: improve xattr consistency checking and error reporting

RISC-V: improve string-function assembly

Adapt the suggestions for the assembly string functions that Andrew
suggested but that I didn't manage to include into the series that
got applied.

This includes improvements to two comments, removal of unneeded labels
and moving one instruction slightly higher to contradict an
explanatory comment.

Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230208225328.1636017-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

spi: tegra210-quad: Fix iterator outside loop

Fix warn: iterator used outside loop: 'xfer'. 'xfer' variable contain
invalid value in few conditions. Complete transfer within DATA phase
in successful case and at the end for failed transfer.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link:https://lore.kernel.org/all/202210191211.46FkzKmv-lkp@intel.com/
Fixes: 8777dd9dff40 ("spi: tegra210-quad: Fix combined sequence")
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20230227200428.45832-1-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

nvme-fabrics: show well known discovery name

The kernel always logs the unique subsystem name for a discovery
controller, even in the case user space asked for the well known.

This has lead to confusion as the logs of nvme-cli and the kernel
logs didn't match.

First, nvme-cli connects to the well known discovery controller to
figure out if it supports TP8013. If so then nvme-cli disconnects and
connects to the unique discovery controller. Currently, the kernel show
that user space connected twice to the unique one.

To avoid further confusion, show the well known discovery controller if
user space asked for it:

  $ nvme connect-all -v -t tcp -a 192.168.0.1
  nvme0: nqn.2014-08.org.nvmexpress.discovery connected
  nvme0: nqn.2014-08.org.nvmexpress.discovery disconnected
  nvme0: nqn.discovery connected

  kernel log:
  nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.0.1:8009
  nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
  nvme nvme0: new ctrl: NQN "nqn.discovery", addr 192.168.0.1:8009

Fixes: e5ea42faa773 ("nvme: display correct subsystem NQN")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: don't access released socket during error recovery

While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.

During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: 02c57a82c008 ("nvme-tcp: print actual source IP address through sysfs "address" attr")
Reviewed-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()

This function was transitioned from returning NVMe status codes to
returning traditional kernel error codes. However, this particular
return now accidentally returns positive error codes like ENOMEM instead
of negative -ENOMEM.

Fixes: b0ef1b11d390 ("nvme-auth: don't use NVMe status codes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: bring back auto-removal of deleted namespaces during sequential scan

Bring back the check of the Identify Namespace return value for the
legacy NVMe 1.0-style sequential scanning. While NVMe 1.0 does not
support namespace management, there are "modern" cloud solutions like
Google Cloud Platform that claim the obsolete 1.0 compliance for no
good reason while supporting proprietary sideband namespace management.

Fixes: 1a893c2bfef4 ("nvme: refactor namespace probing")
Reported-by: Nils Hanke <nh@edgeless.systems>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Nils Hanke <nh@edgeless.systems>

io_uring: fix fget leak when fs don't support nowait buffered read

Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]

Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2

Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.

While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.

io_issue_sqe
|-io_assign_file  // do fget() first
  |-io_read
  |-io_iter_do_read
    |-ocfs2_file_read_iter  // return -EOPNOTSUPP
  |-kiocb_done
    |-io_rw_done
      |-__io_complete_rw_common  // set REQ_F_REISSUE
    |-io_resubmit_prep
      |-io_req_prep_async  // override req->file, leak happens

This was introduced by commit a196c78b5443 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.

[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t

Fixes: a196c78b5443 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>