Linus Torvalds [Fri, 2 Jul 2021 19:54:34 +0000 (12:54 -0700)]
Merge tag 'powerpc-5.14-1' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
Linus Torvalds [Fri, 2 Jul 2021 19:43:40 +0000 (12:43 -0700)]
Merge tag 'asm-generic-unaligned-5.14' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm/unaligned.h unification from Arnd Bergmann:
"Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally
architecture specific, with the two main variants being the
"access-ok.h" version that assumes unaligned pointer accesses always
work on a particular architecture, and the "le-struct.h" version that
casts the data to a byte aligned type before dereferencing, for
architectures that cannot always do unaligned accesses in hardware.
Based on the discussion linked below, it appears that the access-ok
version is not realiable on any architecture, but the struct version
probably has no downsides. This series changes the code to use the
same implementation on all architectures, addressing the few
exceptions separately"
Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: simplify asm/unaligned.h
asm-generic: uaccess: 1-byte access is always aligned
netpoll: avoid put_unaligned() on single character
mwifiex: re-fix for unaligned accesses
apparmor: use get_unaligned() only for multi-byte words
partitions: msdos: fix one-byte get_unaligned()
asm-generic: unaligned always use struct helpers
asm-generic: unaligned: remove byteshift helpers
powerpc: use linux/unaligned/le_struct.h on LE power7
m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
sh: remove unaligned access for sh4a
openrisc: always use unaligned-struct header
asm-generic: use asm-generic/unaligned.h for most architectures
Linus Torvalds [Fri, 2 Jul 2021 19:24:31 +0000 (12:24 -0700)]
Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git./linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Tools:
- Add cgroup support for 'perf top' (-G).
- Add support for KVM MSRs in 'perf kvm stat'
- Support probes on init functions in 'perf probe', to support the
bootconfig format.
- Improve error reporting in 'perf probe'.
- No need to synthesize BUILD_ID records in 'perf inject' if the
MMAP2 records have build ids already.
- Allow toggling source code ('s' hotkey) in 'perf annotate' in all
lines.
- Add itrace options support to 'perf annotate'.
- Support to custom DSO filters for 'perf script'.
Hardware enablement:
- Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
perf.data file header.
- Support PMU prefix for mem-load and mem-store events, to support
hybrid (BIG little) CPUs such as Intel's Alderlake.
- Support hybrid CPUs in 'perf mem' and 'perf c2c'.
Hardware tracing:
- Intel PT now supports tracing KVM guests.
- Timestamp improvements for ARM's Coresight.
Build:
- Add 'make -C tools/perf build-test' entries for
libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1.
- Use bison's --file-prefix-map option to avoid storing full paths
when using O= in the perf build.
Tests:
- Improve the 'perf test' entries for libpfm4 and BPF counters.
Misc:
- Sync msr-index.h, mount.h, kvm headers with the kernel originals.
- Add vendor events and metrics for Intel's Icelake Server & Client"
* tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits)
perf session: Add missing evlist__delete when deleting a session
perf annotate: Allow 's' on source code lines
perf dlfilter: Add object_code() to perf_dlfilter_fns
perf dlfilter: Add attr() to perf_dlfilter_fns
perf dlfilter: Add srcline() to perf_dlfilter_fns
perf dlfilter: Add insn() to perf_dlfilter_fns
perf dlfilter: Add resolve_address() to perf_dlfilter_fns
perf build: Install perf_dlfilter.h
perf script: Add option to pass arguments to dlfilters
perf script: Add option to list dlfilters
perf script: Add dlfilter__filter_event_early()
perf script: Add API for filtering via dynamically loaded shared object
perf llvm: Return -ENOMEM when asprintf() fails
perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers arm64: Update KVM headers from the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools include UAPI: Update linux/mount.h copy
tools arch x86: Sync the msr-index.h copy with the kernel sources
...
Linus Torvalds [Fri, 2 Jul 2021 19:08:10 +0000 (12:08 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
Linus Torvalds [Fri, 2 Jul 2021 00:22:14 +0000 (17:22 -0700)]
Merge branch 'for-5.14' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup.kill is added which implements atomic killing of the whole
subtree.
Down the line, this should be able to replace the multiple userland
implementations of "keep killing till empty".
- PSI can now be turned off at boot time to avoid overhead for
configurations which don't care about PSI.
* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: make per-cgroup pressure stall tracking configurable
cgroup: Fix kernel-doc
cgroup: inline cgroup_task_freeze()
tests/cgroup: test cgroup.kill
tests/cgroup: move cg_wait_for(), cg_prepare_for_wait()
tests/cgroup: use cgroup.kill in cg_killall()
docs/cgroup: add entry for cgroup.kill
cgroup: introduce cgroup.kill
Linus Torvalds [Fri, 2 Jul 2021 00:17:24 +0000 (17:17 -0700)]
Merge branch 'for-5.14' of git://git./linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
- percpu chunk depopulation - depopulate backing pages for chunks with
empty pages when we exceed a global threshold without those pages.
This lets us reclaim a portion of memory that would previously be
lost until the full chunk would be freed (possibly never).
- memcg accounting cleanup - previously separate chunks were managed
for normal allocations and __GFP_ACCOUNT allocations. These are now
consolidated which cleans up the code quite a bit.
- a few misc clean ups for clang warnings
* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: optimize locking in pcpu_balance_workfn()
percpu: initialize best_upa variable
percpu: rework memcg accounting
mm, memcg: introduce mem_cgroup_kmem_disabled()
mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
percpu: make symbol 'pcpu_free_slot' static
percpu: implement partial chunk depopulation
percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1
percpu: factor out pcpu_check_block_hint()
percpu: split __pcpu_balance_workfn()
percpu: fix a comment about the chunks ordering
Linus Torvalds [Fri, 2 Jul 2021 00:03:11 +0000 (17:03 -0700)]
Merge tag 'mips_5.14' of git://git./linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for OpeneEmbed SOM9331 board
- Ingenic fixes/improvments
- other fixes and cleanups
* tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits)
MIPS: Fix PKMAP with 32-bit MIPS huge page support
MIPS: CI20: Add second percpu timer for SMP.
MIPS: CI20: Reduce clocksource to 750 kHz.
MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
dt-bindings: clock: Add documentation for MAC PHY control bindings.
MIPS: X1830: Respect cell count of common properties.
MIPS: set mips32r5 for virt extensions
MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
MIPS: MT extensions are not available on MIPS32r1
mips/kvm: Use BUG_ON instead of if condition followed by BUG
MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource()
MIPS: add PMD table accounting into MIPS'pmd_alloc_one
MIPS: Loongson64: fix spelling of SPDX tag
MIPS: ingenic: rs90: Add dedicated VRAM memory region
MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio
MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc
MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs
MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
MIPS: boot: Support specifying UART port on Ingenic SoCs
...
Linus Torvalds [Thu, 1 Jul 2021 23:57:14 +0000 (16:57 -0700)]
Merge tag 'pinctrl-v5.14-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.14 kernel. Not so
much going on. No core changes, just drivers.
The most interesting would be that MIPS Ralink is migrating to pin
control and we have some bindings but not yet code for the Apple M1
pin controller.
New drivers:
- Last merge window we created a driver for the Ralink RT2880. We are
now moving the Ralink SoC pin control drivers out of the MIPS
architecture code and into the pin control subsystem. This concerns
RT288X, MT7620, RT305X, RT3883 and MT7621.
- Qualcomm SM6125 SoC pin control driver.
- Qualcomm spmi-gpio support for PM7325.
- Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)
- Mediatek MT8365 SoC pin controller.
- New device HID for the AMD GPIO controller.
Improvements:
- Pin bias config support for a slew of Renesas pin controllers.
- Incremental improvements and non-urgent bug fixes to the Renesas
SoC drivers.
- Implement irq_set_wake on the AMD pin controller so we can wake up
from external pin events.
Misc:
- Devicetree bindings for the Apple M1 pin controller, we will
probably see a proper driver for this soon as well"
* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
pinctrl: ralink: rt305x: add missing include
pinctrl: stm32: check for IRQ MUX validity during alloc()
pinctrl: zynqmp: some code cleanups
drivers: qcom: pinctrl: Add pinctrl driver for sm6125
dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
pinctrl: mcp23s08: Add optional reset GPIO
pinctrl: mediatek: fix mode encoding
pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
pinctrl: bcm: Constify static pinmux_ops
pinctrl: bcm: Constify static pinctrl_ops
pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
pinctrl: ralink: move ralink architecture pinmux header into the driver
pinctrl: single: config: enable the pin's input
pinctrl: mtk: Fix mt8365 Kconfig dependency
pinctrl: mcp23s08: fix race condition in irq handler
...
Linus Torvalds [Thu, 1 Jul 2021 21:54:03 +0000 (14:54 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
Linus Torvalds [Thu, 1 Jul 2021 20:26:16 +0000 (13:26 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
Linus Torvalds [Thu, 1 Jul 2021 19:53:43 +0000 (12:53 -0700)]
Merge tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
Linus Torvalds [Thu, 1 Jul 2021 19:16:24 +0000 (12:16 -0700)]
Merge tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Multi-queue iopoll improvement (Fam)
- Allow configurable io-wq CPU masks (me)
- renameat/linkat tightening (me)
- poll re-arm improvement (Olivier)
- SQPOLL race fix (Olivier)
- Cancelation unification (Pavel)
- SQPOLL cleanups (Pavel)
- Enable file backed buffers for shmem/memfd (Pavel)
- A ton of cleanups and performance improvements (Pavel)
- Followup and misc fixes (Colin, Fam, Hao, Olivier)
* tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits)
io_uring: code clean for kiocb_done()
io_uring: spin in iopoll() only when reqs are in a single queue
io_uring: pre-initialise some of req fields
io_uring: refactor io_submit_flush_completions
io_uring: optimise hot path restricted checks
io_uring: remove not needed PF_EXITING check
io_uring: mainstream sqpoll task_work running
io_uring: refactor io_arm_poll_handler()
io_uring: reduce latency by reissueing the operation
io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT
io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT
io_uring: refactor io_openat2()
io_uring: simplify struct io_uring_sqe layout
io_uring: update sqe layout build checks
io_uring: fix code style problems
io_uring: refactor io_sq_thread()
io_uring: don't change sqpoll creds if not needed
io_uring: Create define to modify a SQPOLL parameter
io_uring: Fix race condition when sqp thread goes to sleep
io_uring: improve in tctx_task_work() resubmission
...
Riccardo Mancini [Thu, 24 Jun 2021 23:19:25 +0000 (01:19 +0200)]
perf session: Add missing evlist__delete when deleting a session
ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.
Changes in v2:
- call evlist__delete from within perf_session__delete
v1: https://lore.kernel.org/lkml/
20210621234317.235545-1-rickyman7@gmail.com/
ASan report follows:
$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks
<SNIP unrelated>
Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
#3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 568 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
#3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
#4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 264 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
#3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
#4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
#3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
#1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
#2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
#3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
#4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
#5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
#6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Riccardo Mancini [Thu, 24 Jun 2021 22:34:22 +0000 (00:34 +0200)]
perf annotate: Allow 's' on source code lines
In perf annotate, when 's' is pressed on a line containing source code,
it shows the message "Only available for assembly lines".
This patch gets rid of the error, moving the cursr to the next available
asm line (or the closest previous one if no asm line is found moving
forwards), before hiding source code lines.
Changes in v2:
- handle case of no asm line found in
annotate_browser__find_next_asm_line by returning NULL and
handling error in caller.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624223423.189550-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:18 +0000 (16:18 +0300)]
perf dlfilter: Add object_code() to perf_dlfilter_fns
Add a function, for use by dlfilters, to read object code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:17 +0000 (16:18 +0300)]
perf dlfilter: Add attr() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return the perf_event_attr
structure.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:16 +0000 (16:18 +0300)]
perf dlfilter: Add srcline() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return source code file name and
line number.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:15 +0000 (16:18 +0300)]
perf dlfilter: Add insn() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return instruction bytes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:14 +0000 (16:18 +0300)]
perf dlfilter: Add resolve_address() to perf_dlfilter_fns
Add a function, for use by dlfilters, to resolve addresses from branch
stacks or callchains.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:13 +0000 (16:18 +0300)]
perf build: Install perf_dlfilter.h
Users of the --dlfilter option need to include perf_dlfilter.h
in their filters. Install it to the include path.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:12 +0000 (16:18 +0300)]
perf script: Add option to pass arguments to dlfilters
Add option --dlarg to pass arguments to dlfilters. The --dlarg option can
be repeated to pass more than 1 argument.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:11 +0000 (16:18 +0300)]
perf script: Add option to list dlfilters
Add option --list-dlfilters to list dlfilters in the current directory or
the exec-path e.g. ~/libexec/perf-core/dlfilters. Use with option -v (must
come before option --list-dlfilters) to show long descriptions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:10 +0000 (16:18 +0300)]
perf script: Add dlfilter__filter_event_early()
filter_event_early() can be more than 30% faster than filter_event()
because it is called before internal filtering. In other respects it
is the same as filter_event(), except that it will be passed events
that have yet to be filtered out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 27 Jun 2021 13:18:09 +0000 (16:18 +0300)]
perf script: Add API for filtering via dynamically loaded shared object
In some cases, users want to filter very large amounts of data (e.g.
from AUX area tracing like Intel PT) looking for something specific.
While scripting such as Python can be used, Python is 10 to 20 times
slower than C. So define a C API so that custom filters can be written
and loaded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 17:20:58 +0000 (14:20 -0300)]
perf llvm: Return -ENOMEM when asprintf() fails
Zhihao sent a patch but it made llvm__compile_bpf() return what
asprintf() returns on error, which is just -1, but since this function
returns -errno, fix it by returning -ENOMEM for this case instead.
Fixes: cb76371441d098 ("perf llvm: Allow passing options to llc ...")
Fixes: 5eab5a7ee032ac ("perf llvm: Display eBPF compiling command ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210609115945.2193194-1-chengzhihao1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Wed, 9 Jun 2021 13:04:20 +0000 (16:04 +0300)]
perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
Currently, timeless mode starts the decode on PERF_RECORD_EXIT, and
non-timeless mode starts decoding on the fist PERF_RECORD_AUX record.
This can cause the "data has no samples!" error if the first
PERF_RECORD_AUX record comes before the first (or any relevant)
PERF_RECORD_MMAP2 record because the mmaps are required by the decoder
to access the binary data.
This change pushes the start of non-timeless decoding to the very end of
parsing the file. The PERF_RECORD_EXIT event can't be used because it
might not exist in system-wide or snapshot modes.
I have not been able to find the exact cause for the events to be
intermittently in the wrong order in the basic scenario:
perf record -e cs_etm/@tmc_etr0/u top
But it can be made to happen every time with the --delay option. This is
because "enable_on_exec" is disabled, which causes tracing to start
before the process to be launched is exec'd. For example:
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
perf report -D | grep 'AUX\|MAP'
0
16714475632740 0x520 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x30 flags: 0 []
0
16714476494960 0x5d0 [0x40]: PERF_RECORD_AUX offset: 0x30 size: 0x30 flags: 0 []
0
16714478208900 0x660 [0x40]: PERF_RECORD_AUX offset: 0x60 size: 0x30 flags: 0 []
4294967295 16714478293340 0x700 [0x70]: PERF_RECORD_MMAP2 8712/8712: [0x557a460000(0x54000) @ 0 00:17
5329258 0]: r-xp /usr/bin/top
4294967295 16714478353020 0x770 [0x88]: PERF_RECORD_MMAP2 8712/8712: [0x7f86f72000(0x34000) @ 0 00:17
5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
Another scenario in which decoding from the first aux record fails is a
workload that forks. Although the aux record comes after 'bash', it
comes before 'top', which is what we are interested in. For example:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf report -D | grep 'AUX\|MAP'
4294967295 16853946421300 0x510 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x558f280000(0x142000) @ 0 00:17
5213953 0]: r-xp /usr/bin/bash
4294967295 16853946543560 0x580 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba6e000(0x34000) @ 0 00:17
5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853946628420 0x608 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba9e000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
0
16853947067300 0x690 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x3a60 flags: 0 []
...
0
16853966602580 0x1758 [0x40]: PERF_RECORD_AUX offset: 0xc2470 size: 0x30 flags: 0 []
4294967295 16853967119860 0x1818 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x5559e70000(0x54000) @ 0 00:17
5329258 0]: r-xp /usr/bin/top
4294967295 16853967181620 0x1888 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed06000(0x34000) @ 0 00:17
5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853967237180 0x1910 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed36000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
A third scenario is when the majority of time is spent in a shared
library that is not loaded at startup. For example a dynamically loaded
plugin.
Testing
=======
Testing was done by checking if any samples that are present in the
old output are missing from the new output. Timestamps must be
stripped out with awk because now they are set to the last AUX sample,
rather than the first:
./perf script $4 | awk '!($4="")' > new.script
./perf-default script $4 | awk '!($4="")' > default.script
comm -13 <(sort -u new.script) <(sort -u default.script)
Testing showed that the new output is a superset of the old. When lines
appear in the comm output, it is not because they are missing but
because [unknown] is now resolved to sensible locations. For example
last putp branch here now resolves to libtinfo, so it's not missing
from the output, but is actually improved:
Old:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 0 [unknown] ([unknown])
New:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) =>
7f8ab39208 putp+0x0 (/lib/libtinfo.so.5.9)
In the following two modes, decoding now works and the "data has no
samples!" error is not displayed any more:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
In snapshot mode, there is also an improvement to decoding. Previously
samples for the 'kill' process that was used to send SIGUSR2 were
completely missing, because the process hadn't started yet. But now
there are additional samples present:
perf record -e cs_etm/@tmc_etr0/u --snapshot -a
perf script
stress 19380 [003] 161627.938153:
1000000 instructions:uH:
aaaabb612fb4 [unknown] (/usr/bin/stress)
kill 19644 [000] 161627.938153:
1000000 instructions:uH:
ffffae0ef210 [unknown] (/lib/aarch64-linux-gnu/ld-2.27.so)
stress 19380 [003] 161627.938153:
1000000 instructions:uH:
ffff9e754d40 random_r+0x20 (/lib/aarch64-linux-gnu/libc-2.27.so)
Also tested was the round trip of 'perf inject' followed by 'perf
report' which has the same differences and improvements.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210609130421.13934-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 23:04:45 +0000 (20:04 -0300)]
tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:
59d21d67f37481cf ("KVM: SVM: Software reserved fields")
Picking the new SVM_EXIT_SW exit reasons.
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 15:53:44 +0000 (12:53 -0300)]
tools kvm headers arm64: Update KVM headers from the kernel sources
To pick the changes from:
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
19238e75bd8ed8ff ("kvm: x86: Allow userspace to handle emulation errors")
cb082bfab59a224a ("KVM: stats: Add fd-based API to read binary stats data")
b87cc116c7e1bc62 ("KVM: PPC: Book3S HV: Add KVM_CAP_PPC_RPT_INVALIDATE capability")
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
0dbb11230437895f ("KVM: X86: Introduce KVM_HC_MAP_GPA_RANGE hypercall")
6dba940352038b56 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
644f706719f0297b ("KVM: x86: hyper-v: Introduce KVM_CAP_HYPERV_ENFORCE_CPUID")
That automatically adds support for these new ioctls:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2021-07-01 13:42:07.
006387354 -0300
+++ after 2021-07-01 13:45:16.
051649301 -0300
@@ -95,6 +95,9 @@
[0xc9] = "XEN_HVM_SET_ATTR",
[0xca] = "XEN_VCPU_GET_ATTR",
[0xcb] = "XEN_VCPU_SET_ATTR",
+ [0xcc] = "GET_SREGS2",
+ [0xcd] = "SET_SREGS2",
+ [0xce] = "GET_STATS_FD",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:39:15 +0000 (13:39 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
1348924ba8169f35 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
cbcddaa33d7e11a0 ("perf/x86/rapl: Use CPUID bit on AMD and Hygon parts")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:34:38 +0000 (13:34 -0300)]
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
dd8b477f9a3d8edb ("mount: Support "nosymfollow" in new mount api")
That ends up adding support for the new MOUNT_ATTR_NOSYMFOLLOW mount
attribute:
$ tools/perf/trace/beauty/fsmount.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/fsmount.sh > after
$ diff -u before after
--- before 2021-07-01 13:34:04.
542517355 -0300
+++ after 2021-07-01 13:34:12.
423694537 -0300
@@ -7,4 +7,5 @@
[ilog2(0x00000020) + 1] = "STRICTATIME",
[ilog2(0x00000080) + 1] = "NODIRATIME",
[ilog2(0x00100000) + 1] = "IDMAP",
+ [ilog2(0x00200000) + 1] = "NOSYMFOLLOW",
};
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:32:18 +0000 (13:32 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
1348924ba8169f35 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 19 May 2021 07:19:39 +0000 (15:19 +0800)]
perf arm-spe: Don't wait for PERF_RECORD_EXIT event
When decode Arm SPE trace, it waits for PERF_RECORD_EXIT event (the last
perf event) for processing trace data, which is needless and even might
cause logic error, e.g. it might fail to correlate perf events with Arm
SPE events correctly.
So this patch removes the condition checking for PERF_RECORD_EXIT event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210519071939.1598923-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 19 May 2021 07:19:38 +0000 (15:19 +0800)]
perf arm-spe: Bail out if the trace is later than perf event
It's possible that record in Arm SPE trace is later than perf event and
vice versa. This asks to correlate the perf events and Arm SPE
synthesized events to be processed in the manner of correct timing.
To achieve the time ordering, this patch reverses the flow, it firstly
calls arm_spe_sample() and then calls arm_spe_decode(). By comparing
the timestamp value and detect the perf event is coming earlier than Arm
SPE trace data, it bails out from the decoding loop, the last record is
pushed into auxtrace stack and is deferred to generate sample. To track
the timestamp, everytime it updates timestamp for the latest record.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 19 May 2021 07:19:37 +0000 (15:19 +0800)]
perf arm-spe: Assign kernel time to synthesized event
In current code, it assigns the arch timer counter to the synthesized
samples Arm SPE trace, thus the samples don't contain the kernel time
but only contain the raw counter value.
To fix the issue, this patch converts the timer counter to kernel time
and assigns it to sample timestamp.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 19 May 2021 07:19:36 +0000 (15:19 +0800)]
perf arm-spe: Convert event kernel time to counter value
When handle a perf event, Arm SPE decoder needs to decide if this perf
event is earlier or later than the samples from Arm SPE trace data; to
do comparision, it needs to use the same unit for the time.
This patch converts the event kernel time to arch timer's counter value,
thus it can be used to compare with counter value contained in Arm SPE
Timestamp packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Wed, 19 May 2021 07:19:35 +0000 (15:19 +0800)]
perf arm-spe: Save clock parameters from TIME_CONV event
During the recording phase, "perf record" tool synthesizes event
PERF_RECORD_TIME_CONV for the hardware clock parameters and saves the
event into the data file.
Afterwards, when processing the data file, the event TIME_CONV will be
processed at the very early time and is stored into session context.
This patch extracts these parameters from the session context and saves
into the structure "spe->tc" with the type perf_tsc_conversion, so that
the parameters are ready for conversion between clock counter and time
stamp.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Thu, 1 Jul 2021 09:35:36 +0000 (17:35 +0800)]
perf cs-etm: Remove callback cs_etm_find_snapshot()
The callback cs_etm_find_snapshot() is invoked for snapshot mode, its
main purpose is to find the correct AUX trace data and returns "head"
and "old" (we can call "old" as "old head") to the caller, the caller
__auxtrace_mmap__read() uses these two pointers to decide the AUX trace
data size.
This patch removes cs_etm_find_snapshot() with below reasons:
- The first thing in cs_etm_find_snapshot() is to check if the head has
wrapped around, if it is not, directly bails out. The checking is
pointless, this is because the "head" and "old" pointers both are
monotonical increasing so they never wrap around.
- cs_etm_find_snapshot() adjusts the "head" and "old" pointers and
assumes the AUX ring buffer is fully filled with the hardware trace
data, so it always subtracts the difference "mm->len" from "head" to
get "old". Let's imagine the snapshot is taken in very short
interval, the tracers only fill a small chunk of the trace data into
the AUX ring buffer, in this case, it's wrongly to copy the whole the
AUX ring buffer to perf file.
- As the "head" and "old" pointers are monotonically increased, the
function __auxtrace_mmap__read() handles these two pointers properly.
It calculates the reminders for these two pointers, and the size is
clamped to be never more than "snapshot_size". We can simply reply on
the function __auxtrace_mmap__read() to calculate the correct result
for data copying, it's not necessary to add Arm CoreSight specific
callback.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210701093537.90759-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 25 Jun 2021 07:18:25 +0000 (00:18 -0700)]
perf bpf_counter: Move common functions to bpf_counter.h
Some helper functions will be used for cgroup counting too. Move them
to a header file for sharing.
Committer notes:
Fix the build on older systems with:
- struct bpf_map_info map_info = {0};
+ struct bpf_map_info map_info = { .id = 0, };
This wasn't breaking the build in such systems as bpf_counter.c isn't
built due to:
tools/perf/util/Build:
perf-$(CONFIG_PERF_BPF_SKEL) += bpf_counter.o
The bpf_counter.h file on the other hand is included from places that
are built everywhere.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210625071826.608504-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 1 Jul 2021 19:06:39 +0000 (12:06 -0700)]
Merge tag 'fs_for_v5.14-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull misc fs updates from Jan Kara:
"The new quotactl_fd() syscall (remake of quotactl_path() syscall that
got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
isofs, and writeback fixes and cleanups"
* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix obtain a reference to a freeing memcg css
quota: remove unnecessary oom message
isofs: remove redundant continue statement
quota: Wire up quotactl_fd syscall
quota: Change quotactl_path() systcall to an fd-based one
reiserfs: Remove unneed check in reiserfs_write_full_page()
udf: Fix NULL pointer dereference in udf_symlink function
reiserfs: add check for invalid 1st journal block
Manfred Spraul [Thu, 1 Jul 2021 01:57:18 +0000 (18:57 -0700)]
ipc/util.c: use binary search for max_idx
If semctl(), msgctl() and shmctl() are called with IPC_INFO, SEM_INFO,
MSG_INFO or SHM_INFO, then the return value is the index of the highest
used index in the kernel's internal array recording information about all
SysV objects of the requested type for the current namespace. (This
information can be used with repeated ..._STAT or ..._STAT_ANY operations
to obtain information about all SysV objects on the system.)
There is a cache for this value. But when the cache needs up be updated,
then the highest used index is determined by looping over all possible
values. With the introduction of IPCMNI_EXTEND_SHIFT, this could be a
loop over 16 million entries. And due to /proc/sys/kernel/*next_id, the
index values do not need to be consecutive.
With <write
16000000 to msg_next_id>, msgget(), msgctl(,IPC_RMID) in a
loop, I have observed a performance increase of around factor 13000.
As there is no get_last() function for idr structures: Implement a
"get_last()" using a binary search.
As far as I see, ipc is the only user that needs get_last(), thus
implement it in ipc/util.c and not in a central location.
[akpm@linux-foundation.org: tweak comment, fix typo]
Link: https://lkml.kernel.org/r/20210425075208.11777-2-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manfred Spraul [Thu, 1 Jul 2021 01:57:15 +0000 (18:57 -0700)]
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
The patch solves three weaknesses in ipc/sem.c:
1) The initial read of use_global_lock in sem_lock() is an intentional
race. KCSAN detects these accesses and prints a warning.
2) The code assumes that plain C read/writes are not mangled by the CPU
or the compiler.
3) The comment it sysvipc_sem_proc_show() was hard to understand: The
rest of the comments in ipc/sem.c speaks about sem_perm.lock, and
suddenly this function speaks about ipc_lock_object().
To solve 1) and 2), use READ_ONCE()/WRITE_ONCE(). Plain C reads are used
in code that owns sma->sem_perm.lock.
The comment is updated to solve 3)
[manfred@colorfullife.com: use READ_ONCE()/WRITE_ONCE() for use_global_lock]
Link: https://lkml.kernel.org/r/20210627161919.3196-3-manfred@colorfullife.com
Link: https://lkml.kernel.org/r/20210514175319.12195-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Thu, 1 Jul 2021 01:57:12 +0000 (18:57 -0700)]
ipc: use kmalloc for msg_queue and shmid_kernel
msg_queue and shmid_kernel are quite small objects, no need to use
kvmalloc for them. mhocko@: "Both of them are 256B on most 64b systems."
Previously these objects was allocated via ipc_alloc/ipc_rcu_alloc(),
common function for several ipc objects. It had kvmalloc call inside().
Later, this function went away and was finally replaced by direct kvmalloc
call, and now we can use more suitable kmalloc/kfree for them.
Link: https://lkml.kernel.org/r/0d0b6c9b-8af3-29d8-34e2-a565c53780f3@virtuozzo.com
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Thu, 1 Jul 2021 01:57:09 +0000 (18:57 -0700)]
ipc sem: use kvmalloc for sem_undo allocation
Patch series "ipc: allocations cleanup", v2.
Some ipc objects use the wrong allocation functions: small objects can use
kmalloc(), and vice versa, potentially large objects can use kmalloc().
This patch (of 2):
Size of sem_undo can exceed one page and with the maximum possible nsems =
32000 it can grow up to 64Kb. Let's switch its allocation to kvmalloc to
avoid user-triggered disruptive actions like OOM killer in case of
high-order memory shortage.
User triggerable high order allocations are quite a problem on heavily
fragmented systems. They can be a DoS vector.
Link: https://lkml.kernel.org/r/ebc3ac79-3190-520d-81ce-22ad194986ec@virtuozzo.com
Link: https://lkml.kernel.org/r/a6354fd9-2d55-2e63-dd4d-fa7dc1d11134@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yu Kuai [Thu, 1 Jul 2021 01:57:06 +0000 (18:57 -0700)]
lib/decompressors: remove set but not used variabled 'level'
Fixes gcc '-Wunused-but-set-variable' warning:
lib/decompress_unlzo.c:46:5: warning: variable `level' set but
not used [-Wunused-but-set-variable]
It is never used and so can be removed.
[akpm@linux-foundation.org: warning: value computed is not used]
Link: https://lkml.kernel.org/r/20210514062050.3532344-1-yukuai3@huawei.com
Fixes: 7dd65feb6c60 ("lib: add support for LZO-compressed kernels")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Thu, 1 Jul 2021 01:57:03 +0000 (18:57 -0700)]
selftests/vm/pkeys: exercise x86 XSAVE init state
On x86, there is a set of instructions used to save and restore register
state collectively known as the XSAVE architecture. There are about a
dozen different features managed with XSAVE. The protection keys
register, PKRU, is one of those features.
The hardware optimizes XSAVE by tracking when the state has not changed
from its initial (init) state. In this case, it can avoid the cost of
writing state to memory (it would usually just be a bunch of 0's).
When the pkey register is 0x0 the hardware optionally choose to track the
register as being in the init state (optimize away the writes). AMD CPUs
do this more aggressively compared to Intel.
On x86, PKRU is rarely in its (very permissive) init state. Instead, the
value defaults to something very restrictive. It is not surprising that
bugs have popped up in the rare cases when PKRU reaches its init state.
Add a protection key selftest which gets the protection keys register into
its init state in a way that should work on Intel and AMD. Then, do a
bunch of pkey register reads to watch for inadvertent changes.
This adds "-mxsave" to CFLAGS for all the x86 vm selftests in order to
allow use of the XSAVE instruction __builtin functions. This will make
the builtins available on all of the vm selftests, but is expected to be
harmless.
Link: https://lkml.kernel.org/r/20210611164202.1849B712@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Thu, 1 Jul 2021 01:56:59 +0000 (18:56 -0700)]
selftests/vm/pkeys: refill shadow register after implicit kernel write
The pkey test code keeps a "shadow" of the pkey register around. This
ensures that any bugs which might write to the register can be caught more
quickly.
Generally, userspace has a good idea when the kernel is going to write to
the register. For instance, alloc_pkey() is passed a permission mask.
The caller of alloc_pkey() can update the shadow based on the return value
and the mask.
But, the kernel can also modify the pkey register in a more sneaky way.
For mprotect(PROT_EXEC) mappings, the kernel will allocate a pkey and
write the pkey register to create an execute-only mapping. The kernel
never tells userspace what key it uses for this.
This can cause the test to fail with messages like:
protection_keys_64.2: pkey-helpers.h:132: _read_pkey_reg: Assertion `pkey_reg == shadow_pkey_reg' failed.
because the shadow was not updated with the new kernel-set value.
Forcibly update the shadow value immediately after an mprotect().
Link: https://lkml.kernel.org/r/20210611164200.EF76AB73@viggo.jf.intel.com
Fixes: 6af17cf89e99 ("x86/pkeys/selftests: Add PROT_EXEC test")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Thu, 1 Jul 2021 01:56:56 +0000 (18:56 -0700)]
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
The alloc_pkey() sefltest function wraps the sys_pkey_alloc() system call.
On success, it updates its "shadow" register value because
sys_pkey_alloc() updates the real register.
But, the success check is wrong. pkey_alloc() considers any non-zero
return code to indicate success where the pkey register will be modified.
This fails to take negative return codes into account.
Consider only a positive return value as a successful call.
Link: https://lkml.kernel.org/r/20210611164157.87AB4246@viggo.jf.intel.com
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Thu, 1 Jul 2021 01:56:53 +0000 (18:56 -0700)]
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE
architecture which is used to context-switch processor state (among other
things). In addition, AMD has recently joined the protection keys club by
adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init
state", which actually applied to Intel's implementation but was just
harder to hit. This series adds a test which is expected to help find
this class of bug both on AMD and Intel. All the work around pkeys on x86
also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second
resolution. So, each time alloc_random_pkey() is called, the PRNG is
*RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>);
foo = rand();
bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if
you do:
srand(1);
foo = rand();
srand(1);
bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent
"fix" effectively forced the test case to use the same "random" pkey for
the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
Link: https://lkml.kernel.org/r/20210611164153.91B76FB8@viggo.jf.intel.com
Link: https://lkml.kernel.org/r/20210611164155.192D00FF@viggo.jf.intel.com
Fixes: 6e373263ce07 ("selftests/vm/pkeys: fix alloc_random_pkey() to make it really random")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marco Elver [Thu, 1 Jul 2021 01:56:49 +0000 (18:56 -0700)]
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
Until now no compiler supported an attribute to disable coverage
instrumentation as used by KCOV.
To work around this limitation on x86, noinstr functions have their
coverage instrumentation turned into nops by objtool. However, this
solution doesn't scale automatically to other architectures, such as
arm64, which are migrating to use the generic entry code.
Clang [1] and GCC [2] have added support for the attribute recently.
[1] https://github.com/llvm/llvm-project/commit/
280333021e9550d80f5c1152a34e33e81df1e178
[2] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=
cec4d4a6782c9bd8d071839c50a239c49caca689
The changes will appear in Clang 13 and GCC 12.
Add __no_sanitize_coverage for both compilers, and add it to noinstr.
Note: In the Clang case, __has_feature(coverage_sanitizer) is only true if
the feature is enabled, and therefore we do not require an additional
defined(CONFIG_KCOV) (like in the GCC case where __has_attribute(..) is
always true) to avoid adding redundant attributes to functions if KCOV is
off. That being said, compilers that support the attribute will not
generate errors/warnings if the attribute is redundantly used; however,
where possible let's avoid it as it reduces preprocessed code size and
associated compile-time overheads.
[elver@google.com: Implement __has_feature(coverage_sanitizer) in Clang]
Link: https://lkml.kernel.org/r/20210527162655.3246381-1-elver@google.com
[elver@google.com: add comment explaining __has_feature() in Clang]
Link: https://lkml.kernel.org/r/20210527194448.3470080-1-elver@google.com
Link: https://lkml.kernel.org/r/20210525175819.699786-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Thu, 1 Jul 2021 01:56:46 +0000 (18:56 -0700)]
exec: remove checks in __register_bimfmt()
Delete NULL check, all callers pass valid pointer.
Delete ->load_binary check -- failure to provide hook in a custom module
will be very noticeable at the very first execve call.
Link: https://lkml.kernel.org/r/YK1Gy1qXaLAR+tPl@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Thu, 1 Jul 2021 01:56:43 +0000 (18:56 -0700)]
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
Currently we handle SS_AUTODISARM as soon as we have stored the altstack
settings into sigframe - that's the point when we have set the things up
for eventual sigreturn to restore the old settings. And if we manage to
set the sigframe up (we are not done with that yet), everything's fine.
However, in case of failure we end up with sigframe-to-be abandoned and
SIGSEGV force-delivered. And in that case we end up with inconsistent
rules - late failures have altstack reset, early ones do not.
It's trivial to get consistent behaviour - just handle SS_AUTODISARM once
we have set the sigframe up and are committed to entering the handler,
i.e. in signal_delivered().
Link: https://lore.kernel.org/lkml/20200404170604.GN23230@ZenIV.linux.org.uk/
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Link: https://lkml.kernel.org/r/20210422230846.1756380-1-ndesaulniers@google.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chung-Chiang Cheng [Thu, 1 Jul 2021 01:56:40 +0000 (18:56 -0700)]
hfsplus: report create_date to kstat.btime
The create_date field of inode in hfsplus is corresponding to
kstat.btime and could be reported in statx.
Link: https://lkml.kernel.org/r/20210416172147.8736-1-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Thu, 1 Jul 2021 01:56:37 +0000 (18:56 -0700)]
hfsplus: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Link: https://lkml.kernel.org/r/20210617084944.1279-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Thu, 1 Jul 2021 01:56:34 +0000 (18:56 -0700)]
nilfs2: remove redundant continue statement in a while-loop
The continue statement at the end of the while-loop is redundant,
remove it.
Addresses-Coverity: ("Continue has no effect")
Link: https://lkml.kernel.org/r/20210621100519.10257-1-colin.king@canonical.com
Link: https://lkml.kernel.org/r/1624557664-17159-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Barry Song [Thu, 1 Jul 2021 01:56:31 +0000 (18:56 -0700)]
kprobes: remove duplicated strong free_insn_page in x86 and s390
free_insn_page() in x86 and s390 is same with the common weak function in
kernel/kprobes.c. Plus, the comment "Recover page to RW mode before
releasing it" in x86 seems insensible to be there since resetting mapping
is done by common code in vfree() of module_memfree(). So drop these two
duplicated strong functions and related comment, then mark the common one
in kernel/kprobes.c strong.
Link: https://lkml.kernel.org/r/20210608065736.32656-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Halaney [Thu, 1 Jul 2021 01:56:28 +0000 (18:56 -0700)]
init: print out unknown kernel parameters
It is easy to foobar setting a kernel parameter on the command line
without realizing it, there's not much output that you can use to assess
what the kernel did with that parameter by default.
Make it a little more explicit which parameters on the command line
_looked_ like a valid parameter for the kernel, but did not match anything
and ultimately got tossed to init. This is very similar to the unknown
parameter message received when loading a module.
This assumes the parameters are processed in a normal fashion, some
parameters (dyndbg= for example) don't register their parameter with the
rest of the kernel's parameters, and therefore always show up in this list
(and are also given to init - like the rest of this list).
Another example is BOOT_IMAGE= is highlighted as an offender, which it
technically is, but is passed by LILO and GRUB so most systems will see
that complaint.
An example output where "foobared" and "unrecognized" are intentionally
invalid parameters:
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12-dirty debug log_buf_len=4M foobared unrecognized=foo
Unknown command line parameters: foobared BOOT_IMAGE=/boot/vmlinuz-5.12-dirty unrecognized=foo
Link: https://lkml.kernel.org/r/20210511211009.42259-1-ahalaney@redhat.com
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 1 Jul 2021 01:56:25 +0000 (18:56 -0700)]
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch complains about positive return values of poll functions.
Example:
WARNING: return of an errno should typically be negative (ie: return -EPOLLIN)
+ return EPOLLIN;
Poll functions return positive values. The defines for the return values
of poll functions all start with EPOLL, resulting in a number of false
positives. An often used workaround is to assign poll function return
values to variables and returning that variable, but that is a less than
perfect solution.
There is no error definition which starts with EPOLL, so it is safe to
omit the warning for return values starting with EPOLL.
Link: https://lkml.kernel.org/r/20210622004334.638680-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Thu, 1 Jul 2021 01:56:22 +0000 (18:56 -0700)]
checkpatch: improve the indented label test
checkpatch identifies a label only when a terminating colon
immediately follows an identifier.
Bitfield definitions can appear to be labels so ignore any
spaces between the identifier terminating colon and any digit
that may be used to define a bitfield length.
Miscellanea:
o Improve the initial checkpatch comment
o Use the more typical '&&' instead of 'and'
o Require the initial label character to be a non-digit
(Can't use $Ident here because $Ident allows ## concatenation)
o Use $sline instead of $line to ignore comments
o Use '$sline !~ /.../' instead of '!($line =~ /.../)'
Link: https://lkml.kernel.org/r/b54d673e7cde7de5de0c9ba4dd57dd0858580ca4.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Manikishan Ghantasala <manikishanghantasala@gmail.com>
Cc: Alex Elder <elder@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 1 Jul 2021 01:56:19 +0000 (18:56 -0700)]
checkpatch: scripts/spdxcheck.py now requires python3
Since commit
d0259c42abff ("spdxcheck.py: Use Python 3"), spdxcheck.py
explicitly expects to run as python3 script. If "python" still points to
python v2.7 and the script is executed with "python scripts/spdxcheck.py",
the following error may be seen even if git-python is installed for
python3.
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 10, in <module>
import git
ImportError: No module named git
To fix the problem, check for the existence of python3, check if
the script is executable and not just for its existence, and execute
it directly.
Link: https://lkml.kernel.org/r/20210505211720.447111-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Perches <joe@perches.com>
Cc: Bert Vermeulen <bert@biot.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dimitri John Ledkov [Thu, 1 Jul 2021 01:56:16 +0000 (18:56 -0700)]
lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
lz4 compatible decompressor is simple. The format is underspecified and
relies on EOF notification to determine when to stop. Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding. Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.
To test this I have created two cpio initrds, first a normal one,
main.cpio. And second one with just a single /test-file with content
"second" second.cpio. Then i compressed both of them with gzip, and with
lz4 -l. Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4). To create four testcase initrds:
1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
2) main.cpio.lz4 + extra.cpio.lz4 = pad0.lz4
3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
4) main.cpio.lz4 + pad4 + extra.cpio.lz4 = pad4.lz4
The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.
All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed. Also an
error message printed which usually is harmless.
Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.
This fixes lz4 initrd decompress warning on every boot with grub. And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub. This patch has been shipping in Ubuntu kernels since
January 2021.
[1] ./Documentation/driver-api/early-userspace/buffer-format.rst
BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/20210114200256.196589-1-xnox@ubuntu.com/
Link: https://lkml.kernel.org/r/20210513104831.432975-1-dimitri.ledkov@canonical.com
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Rajat Asthana <thisisrast7@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rajat Asthana [Thu, 1 Jul 2021 01:56:13 +0000 (18:56 -0700)]
lz4_decompress: declare LZ4_decompress_safe_withPrefix64k static
Declare LZ4_decompress_safe_withPrefix64k as static to fix sparse
warning:
> warning: symbol 'LZ4_decompress_safe_withPrefix64k' was not declared.
> Should it be static?
Link: https://lkml.kernel.org/r/20210511154345.610569-1-thisisrast7@gmail.com
Signed-off-by: Rajat Asthana <thisisrast7@gmail.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:56:10 +0000 (18:56 -0700)]
kernel.h: split out kstrtox() and simple_strtox() to a separate header
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out kstrtox() and
simple_strtox() helpers.
At the same time convert users in header and lib folders to use new
header. Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.
[andy.shevchenko@gmail.com: fix documentation references]
Link: https://lkml.kernel.org/r/20210615220003.377901-1-andy.shevchenko@gmail.com
Link: https://lkml.kernel.org/r/20210611185815.44103-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Kars Mulder <kerneldev@karsmulder.nl>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matteo Croce [Thu, 1 Jul 2021 01:56:07 +0000 (18:56 -0700)]
lib/test_string.c: allow module removal
The test_string module can't be removed because it lacks an exit hook.
Since there is no reason for it to be permanent, add an empty one to allow
module removal.
Link: https://lkml.kernel.org/r/20210616234503.28678-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Thu, 1 Jul 2021 01:56:04 +0000 (18:56 -0700)]
lib: uninline simple_strtoull()
Gcc inlines simple_strtoull() too agressively.
Given that all 4 signatures match, everything very efficiently calls or
tailcalls into simple_strtoull():
ffffffff81da0240 <simple_strtoll>:
ffffffff81da0240: 80 3f 2d cmp BYTE PTR [rdi],0x2d
ffffffff81da0243: 74 05 je
ffffffff81da024a <simple_strtoll+0xa>
ffffffff81da0245: e9 76 ff ff ff jmp simple_strtoull
ffffffff81da024a: 48 83 c7 01 add rdi,0x1
ffffffff81da024e: e8 6d ff ff ff call simple_strtoull
ffffffff81da0253: 48 f7 d8 neg rax
ffffffff81da0256: c3 ret
Space savings (on F34-ish .config)
add/remove: 0/0 grow/shrink: 1/3 up/down: 52/-313 (-261)
Function old new delta
vsscanf 2167 2219 +52
simple_strtoul 72 2 -70
simple_strtoll 143 23 -120
simple_strtol 143 20 -123
Link: https://lkml.kernel.org/r/YMO2zoOQk2eF34tn@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Thu, 1 Jul 2021 01:56:01 +0000 (18:56 -0700)]
lib: memscan() fixlet
Generic version doesn't trucate second argument to char.
Older brother memchr() does as do s390, sparc and i386 assembly versions.
Fortunately, no code passes c >= 256.
Link: https://lkml.kernel.org/r/YLv4cCf0t5UPdyK+@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Thu, 1 Jul 2021 01:55:58 +0000 (18:55 -0700)]
lib/mpi: fix spelling mistakes
Fix some spelling mistakes in comments:
flaged ==> flagged
bufer ==> buffer
multipler ==> multiplier
MULTIPLER ==> MULTIPLIER
leaset ==> least
chnage ==> change
Link: https://lkml.kernel.org/r/20210604074401.12198-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Thu, 1 Jul 2021 01:55:55 +0000 (18:55 -0700)]
lib/decompressors: fix spelling mistakes
Fix some spelling mistakes in comments:
sentinal ==> sentinel
compresed ==> compressed
dependeny ==> dependency
immediatelly ==> immediately
dervied ==> derived
splitted ==> split
nore ==> not
independed ==> independent
asumed ==> assumed
Link: https://lkml.kernel.org/r/20210604085656.12257-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trent Piepho [Thu, 1 Jul 2021 01:55:52 +0000 (18:55 -0700)]
lib/math/rational: add Kunit test cases
Adds a number of test cases that cover a range of possible code paths.
[akpm@linux-foundation.org: remove non-ascii characters, fix whitespace]
[colin.king@canonical.com: fix spelling mistake "demominator" -> "denominator"]
Link: https://lkml.kernel.org/r/20210526085049.6393-1-colin.king@canonical.com
Link: https://lkml.kernel.org/r/20210525144250.214670-2-tpiepho@gmail.com
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Oskar Schirmer <oskar@scara.com>
Cc: Yiyuan Guo <yguoaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trent Piepho [Thu, 1 Jul 2021 01:55:49 +0000 (18:55 -0700)]
lib/math/rational.c: fix divide by zero
If the input is out of the range of the allowed values, either larger than
the largest value or closer to zero than the smallest non-zero allowed
value, then a division by zero would occur.
In the case of input too large, the division by zero will occur on the
first iteration. The best result (largest allowed value) will be found by
always choosing the semi-convergent and excluding the denominator based
limit when finding it.
In the case of the input too small, the division by zero will occur on the
second iteration. The numerator based semi-convergent should not be
calculated to avoid the division by zero. But the semi-convergent vs
previous convergent test is still needed, which effectively chooses
between 0 (the previous convergent) vs the smallest allowed fraction (best
semi-convergent) as the result.
Link: https://lkml.kernel.org/r/20210525144250.214670-1-tpiepho@gmail.com
Fixes: 323dd2c3ed0 ("lib/math/rational.c: fix possible incorrect result from rational fractions helper")
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Reported-by: Yiyuan Guo <yguoaz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Oskar Schirmer <oskar@scara.com>
Cc: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:46 +0000 (18:55 -0700)]
seq_file: drop unused *_escape_mem_ascii()
There are no more users of the seq_escape_mem_ascii() followed by
string_escape_mem_ascii().
Remove them for good.
Link: https://lkml.kernel.org/r/20210504180819.73127-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:43 +0000 (18:55 -0700)]
nfsd: avoid non-flexible API in seq_quote_mem()
The seq_escape_mem_ascii() is completely non-flexible and shouldn't be
used. Replace it with properly called seq_escape_mem().
Link: https://lkml.kernel.org/r/20210504180819.73127-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:40 +0000 (18:55 -0700)]
seq_file: convert seq_escape() to use seq_escape_str()
Convert seq_escape() to use seq_escape_str() rather than open coding it.
Note, for now we leave it as an exported symbol due to some old code that
can't tolerate ctype.h being (indirectly) included.
Link: https://lkml.kernel.org/r/20210504180819.73127-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:37 +0000 (18:55 -0700)]
seq_file: add seq_escape_str() as replica of string_escape_str()
In some cases we want to escape characters from NULL-terminated strings.
Add seq_escape_str() as replica of string_escape_str() for that.
Link: https://lkml.kernel.org/r/20210504180819.73127-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:34 +0000 (18:55 -0700)]
seq_file: introduce seq_escape_mem()
Introduce seq_escape_mem() to allow users to pass additional parameters to
string_escape_mem().
Link: https://lkml.kernel.org/r/20210504180819.73127-12-andriy.shevchenko@linux.intel.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:32 +0000 (18:55 -0700)]
MAINTAINERS: add myself as designated reviewer for generic string library
Add myself as designated reviewer for generic string library.
Link: https://lkml.kernel.org/r/20210504180819.73127-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:29 +0000 (18:55 -0700)]
lib/test-string_helpers: add test cases for new features
We have got new flags and hence new features of string_escape_mem().
Add test cases for that.
Link: https://lkml.kernel.org/r/20210504180819.73127-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:26 +0000 (18:55 -0700)]
lib/test-string_helpers: get rid of trailing comma in terminators
Terminators by definition shouldn't accept anything behind. Make them
robust by removing trailing commas.
Link: https://lkml.kernel.org/r/20210504180819.73127-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:23 +0000 (18:55 -0700)]
lib/test-string_helpers: print flags in hexadecimal format
Since flags are bitmapped, it's better to print them in hexadecimal
format.
Link: https://lkml.kernel.org/r/20210504180819.73127-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:20 +0000 (18:55 -0700)]
lib/string_helpers: allow to append additional characters to be escaped
Introduce a new flag to append additional characters, passed in 'only'
parameter, to be escaped if they fall in the corresponding class.
Link: https://lkml.kernel.org/r/20210504180819.73127-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:17 +0000 (18:55 -0700)]
lib/string_helpers: introduce ESCAPE_NAP to escape non-ASCII and non-printable
Some users may want to have an ASCII based filter for printable only
characters, provided by conjunction of isascii() and isprint() functions.
Here is the addition of a such.
Link: https://lkml.kernel.org/r/20210504180819.73127-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:14 +0000 (18:55 -0700)]
lib/string_helpers: introduce ESCAPE_NA for escaping non-ASCII
Some users may want to have an ASCII based filter, provided by isascii()
function. Here is the addition of a such.
Link: https://lkml.kernel.org/r/20210504180819.73127-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:11 +0000 (18:55 -0700)]
lib/string_helpers: drop indentation level in string_escape_mem()
The only one conditional is left on the upper level, move the rest to the
same level and drop indentation level. No functional changes.
Link: https://lkml.kernel.org/r/20210504180819.73127-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:08 +0000 (18:55 -0700)]
lib/string_helpers: move ESCAPE_NP check inside 'else' branch in a loop
Refactor code to have better readability by moving ESCAPE_NP handling
inside 'else' branch in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/20210504180819.73127-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:55:05 +0000 (18:55 -0700)]
lib/string_helpers: switch to use BIT() macro
Patch series "lib/string_helpers: get rid of ugly *_escape_mem_ascii()", v3.
Get rid of ugly *_escape_mem_ascii() API since it's not flexible and has
the only single user. Provide better approach based on usage of the
string_escape_mem() with appropriate flags.
Test cases has been expanded accordingly to cover new functionality.
This patch (of 15):
Switch to use BIT() macro for flag definitions. No changes implied.
Link: https://lkml.kernel.org/r/20210504180819.73127-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210504180819.73127-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Thu, 1 Jul 2021 01:55:02 +0000 (18:55 -0700)]
lib: decompress_bunzip2: remove an unneeded semicolon
The semicolon immediately following '}' is unneeded.
Link: https://lkml.kernel.org/r/20210508094926.2889-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:54:59 +0000 (18:54 -0700)]
kernel.h: split out panic and oops helpers
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Thu, 1 Jul 2021 01:54:56 +0000 (18:54 -0700)]
drm: include only needed headers in ascii85.h
The ascii85.h is user of exactly two headers, i.e. math.h and types.h.
There is no need to carry on entire kernel.h.
Link: https://lkml.kernel.org/r/20210611185915.44181-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiapeng Chong [Thu, 1 Jul 2021 01:54:53 +0000 (18:54 -0700)]
sysctl: remove redundant assignment to first
Variable first is set to '0', but this value is never read as it is not
used later on, hence it is a redundant assignment and can be removed.
Clean up the following clang-analyzer warning:
kernel/sysctl.c:1562:4: warning: Value stored to 'first' is never read
[clang-analyzer-deadcode.DeadStores].
Link: https://lkml.kernel.org/r/1620469990-22182-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalesh Singh [Thu, 1 Jul 2021 01:54:49 +0000 (18:54 -0700)]
procfs/dmabuf: add inode number to /proc/*/fdinfo
And 'ino' field to /proc/<pid>/fdinfo/<FD> and
/proc/<pid>/task/<tid>/fdinfo/<FD>.
The inode numbers can be used to uniquely identify DMA buffers in user
space and avoids a dependency on /proc/<pid>/fd/* when accounting
per-process DMA buffer sizes.
Link: https://lkml.kernel.org/r/20210308170651.919148-2-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalesh Singh [Thu, 1 Jul 2021 01:54:44 +0000 (18:54 -0700)]
procfs: allow reading fdinfo with PTRACE_MODE_READ
Android captures per-process system memory state when certain low memory
events (e.g a foreground app kill) occur, to identify potential memory
hoggers. In order to measure how much memory a process actually consumes,
it is necessary to include the DMA buffer sizes for that process in the
memory accounting. Since the handle to DMA buffers are raw FDs, it is
important to be able to identify which processes have FD references to a
DMA buffer.
Currently, DMA buffer FDs can be accounted using /proc/<pid>/fd/* and
/proc/<pid>/fdinfo -- both are only readable by the process owner, as
follows:
1. Do a readlink on each FD.
2. If the target path begins with "/dmabuf", then the FD is a dmabuf FD.
3. stat the file to get the dmabuf inode number.
4. Read/ proc/<pid>/fdinfo/<fd>, to get the DMA buffer size.
Accessing other processes' fdinfo requires root privileges. This limits
the use of the interface to debugging environments and is not suitable for
production builds. Granting root privileges even to a system process
increases the attack surface and is highly undesirable.
Since fdinfo doesn't permit reading process memory and manipulating
process state, allow accessing fdinfo under PTRACE_MODE_READ_FSCRED.
Link: https://lkml.kernel.org/r/20210308170651.919148-1-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marcelo Henrique Cerri [Thu, 1 Jul 2021 01:54:38 +0000 (18:54 -0700)]
proc: Avoid mixing integer types in mem_rw()
Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.
Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.
Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:35 +0000 (18:54 -0700)]
nouveau/svm: implement atomic SVM access
Some NVIDIA GPUs do not support direct atomic access to system memory via
PCIe. Instead this must be emulated by granting the GPU exclusive access
to the memory. This is achieved by replacing CPU page table entries with
special swap entries that fault on userspace access.
The driver then grants the GPU permission to update the page undergoing
atomic access via the GPU page tables. When CPU access to the page is
required a CPU fault is raised which calls into the device driver via MMU
notifiers to revoke the atomic access. The original page table entries
are then restored allowing CPU access to proceed.
Link: https://lkml.kernel.org/r/20210616105937.23201-11-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:32 +0000 (18:54 -0700)]
nouveau/svm: refactor nouveau_range_fault
Call mmu_interval_notifier_insert() as part of nouveau_range_fault().
This doesn't introduce any functional change but makes it easier for a
subsequent patch to alter the behaviour of nouveau_range_fault() to
support GPU atomic operations.
Link: https://lkml.kernel.org/r/20210616105937.23201-10-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:28 +0000 (18:54 -0700)]
mm: selftests for exclusive device memory
Adds some selftests for exclusive device memory.
Link: https://lkml.kernel.org/r/20210616105937.23201-9-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:25 +0000 (18:54 -0700)]
mm: device exclusive memory access
Some devices require exclusive write access to shared virtual memory (SVM)
ranges to perform atomic operations on that memory. This requires CPU
page tables to be updated to deny access whilst atomic operations are
occurring.
In order to do this introduce a new swap entry type
(SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive
access by a device all page table mappings for the particular range are
replaced with device exclusive swap entries. This causes any CPU access
to the page to result in a fault.
Faults are resovled by replacing the faulting entry with the original
mapping. This results in MMU notifiers being called which a driver uses
to update access permissions such as revoking atomic access. After
notifiers have been called the device will no longer have exclusive access
to the region.
Walking of the page tables to find the target pages is handled by
get_user_pages() rather than a direct page table walk. A direct page
table walk similar to what migrate_vma_collect()/unmap() does could also
have been utilised. However this resulted in more code similar in
functionality to what get_user_pages() provides as page faulting is
required to make the PTEs present and to break COW.
[dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()]
Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda
Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:22 +0000 (18:54 -0700)]
mm/memory.c: allow different return codes for copy_nonpresent_pte()
Currently if copy_nonpresent_pte() returns a non-zero value it is assumed
to be a swap entry which requires further processing outside the loop in
copy_pte_range() after dropping locks. This prevents other values being
returned to signal conditions such as failure which a subsequent change
requires.
Instead make copy_nonpresent_pte() return an error code if further
processing is required and read the value for the swap entry in the main
loop under the ptl.
Link: https://lkml.kernel.org/r/20210616105937.23201-7-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:19 +0000 (18:54 -0700)]
mm: rename migrate_pgmap_owner
MMU notifier ranges have a migrate_pgmap_owner field which is used by
drivers to store a pointer. This is subsequently used by the driver
callback to filter MMU_NOTIFY_MIGRATE events. Other notifier event types
can also benefit from this filtering, so rename the 'migrate_pgmap_owner'
field to 'owner' and create a new notifier initialisation function to
initialise this field.
Link: https://lkml.kernel.org/r/20210616105937.23201-6-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:16 +0000 (18:54 -0700)]
mm/rmap: split migration into its own function
Migration is currently implemented as a mode of operation for
try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag
or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE.
However it does not have much in common with the rest of the unmap
functionality of try_to_unmap_one() and thus splitting it into a separate
function reduces the complexity of try_to_unmap_one() making it more
readable.
Several simplifications can also be made in try_to_migrate_one() based on
the following observations:
- All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK.
- No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON.
- No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH.
TTU_SPLIT_FREEZE is a special case of migration used when splitting an
anonymous page. This is most easily dealt with by calling the correct
function from unmap_page() in mm/huge_memory.c - either try_to_migrate()
for PageAnon or try_to_unmap().
Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alistair Popple [Thu, 1 Jul 2021 01:54:12 +0000 (18:54 -0700)]
mm/rmap: split try_to_munlock from try_to_unmap
The behaviour of try_to_unmap_one() is difficult to follow because it
performs different operations based on a fairly large set of flags used in
different combinations.
TTU_MUNLOCK is one such flag. However it is exclusively used by
try_to_munlock() which specifies no other flags. Therefore rather than
overload try_to_unmap_one() with unrelated behaviour split this out into
it's own function and remove the flag.
Link: https://lkml.kernel.org/r/20210616105937.23201-4-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
git.samba.org / sfrench / cifs-2.6.git / log