Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git...

Merge tag 'qcom-arm64-for-6.5' of https://git./linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added.  Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.

On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.

On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.

MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.

As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.

MSM8953 gains DMA support in I2C masters.

MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.

On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.

iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.

Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.

On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.

Fairphone 3 gains support for its notification LED.

On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.

On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.

Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.

SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.

Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.

On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.

SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.

* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
  arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
  arm64: dts: qcom: sc8180x: Introduce Primus
  arm64: dts: qcom: sc8180x: Add pmics
  arm64: dts: qcom: sc8180x: Add display and gpu nodes
  arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
  arm64: dts: qcom: sc8180x: Add PCIe instances
  arm64: dts: qcom: sc8180x: Add QUPs
  arm64: dts: qcom: sc8180x: Add thermal zones
  arm64: dts: qcom: sc8180x: Add interconnects and lmh
  arm64: dts: qcom: Introduce the SC8180x platform
  arm64: dts: qcom: msm8916: Move aliases to boards
  arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
  arm64: dts: qcom: msm8916/39: Clean up MDSS labels
  arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
  arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
  arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
  arm64: dts: qcom: qrb4210-rb2: Enable USB node
  arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  ...

Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>