return ret;
}
-#define CSR_DEFAULT_VALUE 0x8480040E
-#define ISC_DEFAULT_VALUE 0x0
-#define ISD_DEFAULT_VALUE 0x0
-#define IMC_DEFAULT_VALUE 0x7FFF0003
-#define IMD_DEFAULT_VALUE 0x7FFF0003
-#define IPCC_DEFAULT_VALUE 0x0
-#define IPCD_DEFAULT_VALUE 0x0
-#define CLKCTL_DEFAULT_VALUE 0x7FF
-#define CSR2_DEFAULT_VALUE 0x0
-#define LTR_CTRL_DEFAULT_VALUE 0x0
-#define HMD_CTRL_DEFAULT_VALUE 0x0
-
-static void hsw_set_shim_defaults(struct sst_dsp *sst)
-{
- sst_dsp_shim_write_unlocked(sst, SST_CSR, CSR_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_ISRX, ISC_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_ISRD, ISD_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_IMRX, IMC_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_IMRD, IMD_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_IPCX, IPCC_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_IPCD, IPCD_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_CLKCTL, CLKCTL_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_CSR2, CSR2_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_LTRC, LTR_CTRL_DEFAULT_VALUE);
- sst_dsp_shim_write_unlocked(sst, SST_HMDC, HMD_CTRL_DEFAULT_VALUE);
-}
-
-/* all clock-gating minus DCLCGE and DTCGE */
-#define SST_VDRTCL2_CG_OTHER 0xB7D
-
static void hsw_set_dsp_D3(struct sst_dsp *sst)
{
+ u32 val;
u32 reg;
- /* disable clock core gating */
+ /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg &= ~(SST_VDRTCL2_DCLCGE);
+ reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
- /* stall, reset and set 24MHz XOSC */
- sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
- SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST,
- SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST);
-
- /* DRAM power gating all */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
- reg |= SST_VDRTCL0_ISRAMPGE_MASK |
- SST_VDRTCL0_DSRAMPGE_MASK;
- reg &= ~(SST_VDRTCL0_D3SRAMPGD);
- reg |= SST_VDRTCL0_D3PGD;
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
- udelay(50);
+ /* enable power gating and switch off DRAM & IRAM blocks */
+ val = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+ val |= SST_VDRTCL0_DSRAMPGE_MASK |
+ SST_VDRTCL0_ISRAMPGE_MASK;
+ val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD);
+ writel(val, sst->addr.pci_cfg + SST_VDRTCTL0);
- /* PLL shutdown enable */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_APLLSE_MASK;
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+ /* switch off audio PLL */
+ val = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
+ val |= SST_VDRTCL2_APLLSE_MASK;
+ writel(val, sst->addr.pci_cfg + SST_VDRTCTL2);
- /* disable MCLK */
+ /* disable MCLK(clkctl.smos = 0) */
sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
- SST_CLKCTL_MASK, 0);
-
- /* switch clock gating */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_CG_OTHER;
- reg &= ~(SST_VDRTCL2_DTCGE);
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
- /* enable DTCGE separatelly */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_DTCGE;
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+ SST_CLKCTL_MASK, 0);
- /* set shim defaults */
- hsw_set_shim_defaults(sst);
-
- /* set D3 */
- reg = readl(sst->addr.pci_cfg + SST_PMCS);
- reg |= SST_PMCS_PS_MASK;
- writel(reg, sst->addr.pci_cfg + SST_PMCS);
+ /* Set D3 state, delay 50 us */
+ val = readl(sst->addr.pci_cfg + SST_PMCS);
+ val |= SST_PMCS_PS_MASK;
+ writel(val, sst->addr.pci_cfg + SST_PMCS);
udelay(50);
- /* enable clock core gating */
+ /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_DCLCGE;
+ reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+
udelay(50);
+
}
static void hsw_reset(struct sst_dsp *sst)
SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL);
}
-/* recommended CSR state for power-up */
-#define SST_CSR_D0_MASK (0x18A09C0C | SST_CSR_DCS_MASK)
-
static int hsw_set_dsp_D0(struct sst_dsp *sst)
{
- u32 reg;
+ int tries = 10;
+ u32 reg, fw_dump_bit;
- /* disable clock core gating */
+ /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */
reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg &= ~(SST_VDRTCL2_DCLCGE);
+ reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE);
writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
- /* switch clock gating */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_CG_OTHER;
- reg &= ~(SST_VDRTCL2_DTCGE);
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
+ /* Disable D3PG (VDRTCTL0.D3PGD = 1) */
+ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+ reg |= SST_VDRTCL0_D3PGD;
+ writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
- /* set D0 */
+ /* Set D0 state */
reg = readl(sst->addr.pci_cfg + SST_PMCS);
- reg &= ~(SST_PMCS_PS_MASK);
+ reg &= ~SST_PMCS_PS_MASK;
writel(reg, sst->addr.pci_cfg + SST_PMCS);
- /* DRAM power gating none */
- reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
- reg &= ~(SST_VDRTCL0_ISRAMPGE_MASK |
- SST_VDRTCL0_DSRAMPGE_MASK);
- reg |= SST_VDRTCL0_D3SRAMPGD;
- reg |= SST_VDRTCL0_D3PGD;
- writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0);
- mdelay(10);
+ /* check that ADSP shim is enabled */
+ while (tries--) {
+ reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK;
+ if (reg == 0)
+ goto finish;
+
+ msleep(1);
+ }
+
+ return -ENODEV;
- /* set shim defaults */
- hsw_set_shim_defaults(sst);
+finish:
+ /* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */
+ sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
+ SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0);
+
+ /* stall DSP core, set clk to 192/96Mhz */
+ sst_dsp_shim_update_bits_unlocked(sst,
+ SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK,
+ SST_CSR_STALL | SST_CSR_DCS(4));
- /* restore MCLK */
+ /* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */
sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL,
- SST_CLKCTL_MASK, SST_CLKCTL_MASK);
+ SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0,
+ SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0);
- /* PLL shutdown disable */
+ /* Stall and reset core, set CSR */
+ hsw_reset(sst);
+
+ /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */
reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg &= ~(SST_VDRTCL2_APLLSE_MASK);
+ reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE;
writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
- sst_dsp_shim_update_bits_unlocked(sst, SST_CSR,
- SST_CSR_D0_MASK, SST_CSR_SBCS0 | SST_CSR_SBCS1 |
- SST_CSR_STALL | SST_CSR_DCS(4));
udelay(50);
- /* enable clock core gating */
+ /* switch on audio PLL */
reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2);
- reg |= SST_VDRTCL2_DCLCGE;
+ reg &= ~SST_VDRTCL2_APLLSE_MASK;
writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2);
- /* clear reset */
- sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_RST, 0);
+ /* set default power gating control, enable power gating control for all blocks. that is,
+ can't be accessed, please enable each block before accessing. */
+ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0);
+ reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK;
+ /* for D0, always enable the block(DSRAM[0]) used for FW dump */
+ fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT;
+ writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0);
+
/* disable DMA finish function for SSP0 & SSP1 */
sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1,
sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY |
SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0);
+ /* clear IPC registers */
+ sst_dsp_shim_write(sst, SST_IPCX, 0x0);
+ sst_dsp_shim_write(sst, SST_IPCD, 0x0);
+ sst_dsp_shim_write(sst, 0x80, 0x6);
+ sst_dsp_shim_write(sst, 0xe0, 0x300a);
+
return 0;
}
{
dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n");
+ /* put DSP into reset and stall */
+ sst_dsp_shim_update_bits(sst, SST_CSR,
+ SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL,
+ SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS);
+
hsw_set_dsp_D3(sst);
dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n");
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff