device.h: move 'struct driver' stuff out to device/driver.h
[sfrench/cifs-2.6.git] / include / linux / device.h
index 4c261fbd70533b4787648e056090b17bec339bf2..0cd7c647c16c6acc316df7ce03d9bf779f25ab34 100644 (file)
@@ -28,6 +28,7 @@
 #include <linux/overflow.h>
 #include <linux/device/bus.h>
 #include <linux/device/class.h>
+#include <linux/device/driver.h>
 #include <asm/device.h>
 
 struct device;
@@ -45,227 +46,6 @@ struct iommu_fwspec;
 struct dev_pin_info;
 struct iommu_param;
 
-/**
- * enum probe_type - device driver probe type to try
- *     Device drivers may opt in for special handling of their
- *     respective probe routines. This tells the core what to
- *     expect and prefer.
- *
- * @PROBE_DEFAULT_STRATEGY: Used by drivers that work equally well
- *     whether probed synchronously or asynchronously.
- * @PROBE_PREFER_ASYNCHRONOUS: Drivers for "slow" devices which
- *     probing order is not essential for booting the system may
- *     opt into executing their probes asynchronously.
- * @PROBE_FORCE_SYNCHRONOUS: Use this to annotate drivers that need
- *     their probe routines to run synchronously with driver and
- *     device registration (with the exception of -EPROBE_DEFER
- *     handling - re-probing always ends up being done asynchronously).
- *
- * Note that the end goal is to switch the kernel to use asynchronous
- * probing by default, so annotating drivers with
- * %PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us
- * to speed up boot process while we are validating the rest of the
- * drivers.
- */
-enum probe_type {
-       PROBE_DEFAULT_STRATEGY,
-       PROBE_PREFER_ASYNCHRONOUS,
-       PROBE_FORCE_SYNCHRONOUS,
-};
-
-/**
- * struct device_driver - The basic device driver structure
- * @name:      Name of the device driver.
- * @bus:       The bus which the device of this driver belongs to.
- * @owner:     The module owner.
- * @mod_name:  Used for built-in modules.
- * @suppress_bind_attrs: Disables bind/unbind via sysfs.
- * @probe_type:        Type of the probe (synchronous or asynchronous) to use.
- * @of_match_table: The open firmware table.
- * @acpi_match_table: The ACPI match table.
- * @probe:     Called to query the existence of a specific device,
- *             whether this driver can work with it, and bind the driver
- *             to a specific device.
- * @sync_state:        Called to sync device state to software state after all the
- *             state tracking consumers linked to this device (present at
- *             the time of late_initcall) have successfully bound to a
- *             driver. If the device has no consumers, this function will
- *             be called at late_initcall_sync level. If the device has
- *             consumers that are never bound to a driver, this function
- *             will never get called until they do.
- * @remove:    Called when the device is removed from the system to
- *             unbind a device from this driver.
- * @shutdown:  Called at shut-down time to quiesce the device.
- * @suspend:   Called to put the device to sleep mode. Usually to a
- *             low power state.
- * @resume:    Called to bring a device from sleep mode.
- * @groups:    Default attributes that get created by the driver core
- *             automatically.
- * @dev_groups:        Additional attributes attached to device instance once the
- *             it is bound to the driver.
- * @pm:                Power management operations of the device which matched
- *             this driver.
- * @coredump:  Called when sysfs entry is written to. The device driver
- *             is expected to call the dev_coredump API resulting in a
- *             uevent.
- * @p:         Driver core's private data, no one other than the driver
- *             core can touch this.
- *
- * The device driver-model tracks all of the drivers known to the system.
- * The main reason for this tracking is to enable the driver core to match
- * up drivers with new devices. Once drivers are known objects within the
- * system, however, a number of other things become possible. Device drivers
- * can export information and configuration variables that are independent
- * of any specific device.
- */
-struct device_driver {
-       const char              *name;
-       struct bus_type         *bus;
-
-       struct module           *owner;
-       const char              *mod_name;      /* used for built-in modules */
-
-       bool suppress_bind_attrs;       /* disables bind/unbind via sysfs */
-       enum probe_type probe_type;
-
-       const struct of_device_id       *of_match_table;
-       const struct acpi_device_id     *acpi_match_table;
-
-       int (*probe) (struct device *dev);
-       void (*sync_state)(struct device *dev);
-       int (*remove) (struct device *dev);
-       void (*shutdown) (struct device *dev);
-       int (*suspend) (struct device *dev, pm_message_t state);
-       int (*resume) (struct device *dev);
-       const struct attribute_group **groups;
-       const struct attribute_group **dev_groups;
-
-       const struct dev_pm_ops *pm;
-       void (*coredump) (struct device *dev);
-
-       struct driver_private *p;
-};
-
-
-extern int __must_check driver_register(struct device_driver *drv);
-extern void driver_unregister(struct device_driver *drv);
-
-extern struct device_driver *driver_find(const char *name,
-                                        struct bus_type *bus);
-extern int driver_probe_done(void);
-extern void wait_for_device_probe(void);
-
-/* sysfs interface for exporting driver attributes */
-
-struct driver_attribute {
-       struct attribute attr;
-       ssize_t (*show)(struct device_driver *driver, char *buf);
-       ssize_t (*store)(struct device_driver *driver, const char *buf,
-                        size_t count);
-};
-
-#define DRIVER_ATTR_RW(_name) \
-       struct driver_attribute driver_attr_##_name = __ATTR_RW(_name)
-#define DRIVER_ATTR_RO(_name) \
-       struct driver_attribute driver_attr_##_name = __ATTR_RO(_name)
-#define DRIVER_ATTR_WO(_name) \
-       struct driver_attribute driver_attr_##_name = __ATTR_WO(_name)
-
-extern int __must_check driver_create_file(struct device_driver *driver,
-                                       const struct driver_attribute *attr);
-extern void driver_remove_file(struct device_driver *driver,
-                              const struct driver_attribute *attr);
-
-extern int __must_check driver_for_each_device(struct device_driver *drv,
-                                              struct device *start,
-                                              void *data,
-                                              int (*fn)(struct device *dev,
-                                                        void *));
-struct device *driver_find_device(struct device_driver *drv,
-                                 struct device *start, const void *data,
-                                 int (*match)(struct device *dev, const void *data));
-
-/**
- * driver_find_device_by_name - device iterator for locating a particular device
- * of a specific name.
- * @drv: the driver we're iterating
- * @name: name of the device to match
- */
-static inline struct device *driver_find_device_by_name(struct device_driver *drv,
-                                                       const char *name)
-{
-       return driver_find_device(drv, NULL, name, device_match_name);
-}
-
-/**
- * driver_find_device_by_of_node- device iterator for locating a particular device
- * by of_node pointer.
- * @drv: the driver we're iterating
- * @np: of_node pointer to match.
- */
-static inline struct device *
-driver_find_device_by_of_node(struct device_driver *drv,
-                             const struct device_node *np)
-{
-       return driver_find_device(drv, NULL, np, device_match_of_node);
-}
-
-/**
- * driver_find_device_by_fwnode- device iterator for locating a particular device
- * by fwnode pointer.
- * @drv: the driver we're iterating
- * @fwnode: fwnode pointer to match.
- */
-static inline struct device *
-driver_find_device_by_fwnode(struct device_driver *drv,
-                            const struct fwnode_handle *fwnode)
-{
-       return driver_find_device(drv, NULL, fwnode, device_match_fwnode);
-}
-
-/**
- * driver_find_device_by_devt- device iterator for locating a particular device
- * by devt.
- * @drv: the driver we're iterating
- * @devt: devt pointer to match.
- */
-static inline struct device *driver_find_device_by_devt(struct device_driver *drv,
-                                                       dev_t devt)
-{
-       return driver_find_device(drv, NULL, &devt, device_match_devt);
-}
-
-static inline struct device *driver_find_next_device(struct device_driver *drv,
-                                                    struct device *start)
-{
-       return driver_find_device(drv, start, NULL, device_match_any);
-}
-
-#ifdef CONFIG_ACPI
-/**
- * driver_find_device_by_acpi_dev : device iterator for locating a particular
- * device matching the ACPI_COMPANION device.
- * @drv: the driver we're iterating
- * @adev: ACPI_COMPANION device to match.
- */
-static inline struct device *
-driver_find_device_by_acpi_dev(struct device_driver *drv,
-                              const struct acpi_device *adev)
-{
-       return driver_find_device(drv, NULL, adev, device_match_acpi_dev);
-}
-#else
-static inline struct device *
-driver_find_device_by_acpi_dev(struct device_driver *drv, const void *adev)
-{
-       return NULL;
-}
-#endif
-
-void driver_deferred_probe_add(struct device *dev);
-int driver_deferred_probe_check_state(struct device *dev);
-int driver_deferred_probe_check_state_continue(struct device *dev);
-
 /**
  * struct subsys_interface - interfaces to device functions
  * @name:       name of the device function
@@ -1018,8 +798,6 @@ static inline struct device_node *dev_of_node(struct device *dev)
        return dev->of_node;
 }
 
-void driver_init(void);
-
 /*
  * High level routines for use by the bus drivers
  */
@@ -1193,52 +971,4 @@ extern long sysfs_deprecated;
 #define sysfs_deprecated 0
 #endif
 
-/**
- * module_driver() - Helper macro for drivers that don't do anything
- * special in module init/exit. This eliminates a lot of boilerplate.
- * Each module may only use this macro once, and calling it replaces
- * module_init() and module_exit().
- *
- * @__driver: driver name
- * @__register: register function for this driver type
- * @__unregister: unregister function for this driver type
- * @...: Additional arguments to be passed to __register and __unregister.
- *
- * Use this macro to construct bus specific macros for registering
- * drivers, and do not use it on its own.
- */
-#define module_driver(__driver, __register, __unregister, ...) \
-static int __init __driver##_init(void) \
-{ \
-       return __register(&(__driver) , ##__VA_ARGS__); \
-} \
-module_init(__driver##_init); \
-static void __exit __driver##_exit(void) \
-{ \
-       __unregister(&(__driver) , ##__VA_ARGS__); \
-} \
-module_exit(__driver##_exit);
-
-/**
- * builtin_driver() - Helper macro for drivers that don't do anything
- * special in init and have no exit. This eliminates some boilerplate.
- * Each driver may only use this macro once, and calling it replaces
- * device_initcall (or in some cases, the legacy __initcall).  This is
- * meant to be a direct parallel of module_driver() above but without
- * the __exit stuff that is not used for builtin cases.
- *
- * @__driver: driver name
- * @__register: register function for this driver type
- * @...: Additional arguments to be passed to __register
- *
- * Use this macro to construct bus specific macros for registering
- * drivers, and do not use it on its own.
- */
-#define builtin_driver(__driver, __register, ...) \
-static int __init __driver##_init(void) \
-{ \
-       return __register(&(__driver) , ##__VA_ARGS__); \
-} \
-device_initcall(__driver##_init);
-
 #endif /* _DEVICE_H_ */