firmware: delete in-kernel firmware

[sfrench/cifs-2.6.git] / firmware / av7110 / Boot.S

diff --git a/firmware/av7110/Boot.S b/firmware/av7110/Boot.S
deleted file mode 100644 (file)
index d562fdc..0000000
--- a/firmware/av7110/Boot.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-   Boot.S: boot loader for Siemens DVB-S card
-
-   Copyright (C) 2001 Convergence integrated media GmbH
-                     Written by Ralph Metzler
-                                <rjkm@convergence.de>
-   Copyright (C) 2006 Matthieu CASTET <castet.mattheiu@free.fr>
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU General Public License
-   as published by the Free Software Foundation; either version 2
-   of the License, or (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
-
-*/
-
-/*
-       check AV711x_3_1.pdf for some hardware infos
-       build it with :
-       $ cc -mbig-endian -c Boot.S
-       $ ld -Ttext 0x2c000000 -EB -o Boot Boot.o
-       $ objcopy -Obinary Boot
-*/
-
-       .text
-       .align
-       .globl _start
-_start:
-       b reset                 // reset vector
-       movs  pc, r14           // undefined
-       subs  pc, r14, #4       // SWI
-       subs  pc, r14, #4       // prefetch abort
-       subs  pc, r14, #8       // data abort
-       subs  pc, r14, #4       // reserved
-       subs  pc, r14, #4       // IRQ
-       subs  pc, r14, #4       // FIQ
-
-       .word tbl               // table needed by firmware ROM
-tbl:   .word (endtbl - tbl)
-       .word 0
-       .word conf
-endtbl:        .word 0
-conf:  .word 0xa5a55a5a
-       .word 0x001f1555
-       .word 0x00000009
-
-reset: ldr     r13, buffer
-       ldr     r4, flag
-       mov     r0, #0
-       str     r0, [r4]
-       str     r0, [r4, #4]
-
-       ldr             r1, wait_address
-       ldr             r2, flag_address
-       ldr             r3, sram
-
-copycode: // copy the code HW Sram
-       ldmia   r1!, {r5-r12}
-       stmia   r3!, {r5-r12}
-       cmp             r1, r2
-       ble     copycode
-       ldr             pc, sram // jump to the copied code
-
-wait:  ldrh    r1, [r4]        // wait for flag!=0
-       cmp     r1, #0
-       beq     wait
-
-       mov     r1, r13         // buffer address
-       ldr     r3, [r4,#4]     // destaddr
-
-       ldrh    r2, [r4,#2]     // get segment length
-       add     r2, r2, #63     // round length to next 64 bytes
-       movs    r2, r2, lsr #6  // and divide by 64
-       moveq   r0, #2          // if 0, set flag to 2, else signal
-       strh    r0, [r4]        // that buffer is accepted by setting to 0
-        beq wait
-       
-copyloop:
-       ldmia   r1!, {r5-r12}
-       stmia   r3!, {r5-r12}
-       ldmia   r1!, {r5-r12}
-       stmia   r3!, {r5-r12}
-       subs    r2, r2, #1
-       bne     copyloop
-
-       eor     r13, r13, #0x1400    // switch to other buffer
-       b       wait
-
-// flag is stored at 0x2c0003f8, length at 0x2c0003fa,
-// destaddr at 0x2c0003fc
-
-flag:  .word   0x2c0003f8
-
-
-// buffer 1 is at 0x2c000400, buffer 2 at 0x2c001000
-
-buffer:        .word   0x2c000400
-
-sram: .word   0x9e000800
-wait_address: .word   wait
-flag_address: .word   flag