* @rproc: handle of a remote processor
* @da: remoteproc device address to translate
* @len: length of the memory region @da is pointing to
+ * @is_iomem: optional pointer filled in to indicate if @da is iomapped memory
*
* Some remote processors will ask us to allocate them physically contiguous
* memory regions (which we call "carveouts"), and map them to specific
* translations on the internal remoteproc memory regions through a platform
* implementation specific da_to_va ops, if present.
*
- * The function returns a valid kernel address on success or NULL on failure.
- *
* Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too,
* but only on kernel direct mapped RAM memory. Instead, we're just using
* here the output of the DMA API for the carveouts, which should be more
* correct.
+ *
+ * Return: a valid kernel address on success or NULL on failure
*/
void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
* use RSC_DEVMEM resource entries to map their required @da to the physical
* address of their base CMA region (ouch, hacky!).
*
- * Returns 0 on success, or an appropriate error code otherwise
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
int offset, int avail)
* support dynamically allocating this address using the generic
* DMA API (but currently there isn't a use case for that).
*
- * Returns 0 on success, or an appropriate error code otherwise
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_handle_trace(struct rproc *rproc, void *ptr,
int offset, int avail)
* tell us ranges of physical addresses the firmware is allowed to request,
* and not allow firmwares to request access to physical addresses that
* are outside those ranges.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_handle_devmem(struct rproc *rproc, void *ptr,
int offset, int avail)
*
* This function allocate specified memory entry @mem using
* dma_alloc_coherent() as default allocator
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_alloc_carveout(struct rproc *rproc,
struct rproc_mem_entry *mem)
*
* This function releases specified memory entry @mem allocated via
* rproc_alloc_carveout() function by @rproc.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_release_carveout(struct rproc *rproc,
struct rproc_mem_entry *mem)
* (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
* needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
* pressure is important; it may have a substantial impact on performance.
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
*/
static int rproc_handle_carveout(struct rproc *rproc,
void *ptr, int offset, int avail)
*
* This function allocates a rproc_mem_entry struct and fill it with parameters
* provided by client.
+ *
+ * Return: a valid pointer on success, or NULL on failure
*/
__printf(8, 9)
struct rproc_mem_entry *
*
* This function allocates a rproc_mem_entry struct and fill it with parameters
* provided by client.
+ *
+ * Return: a valid pointer on success, or NULL on failure
*/
__printf(5, 6)
struct rproc_mem_entry *
* remoteproc functional again.
*
* This function can sleep, so it cannot be called from atomic context.
+ *
+ * Return: 0 on success or a negative value upon failure
*/
int rproc_trigger_recovery(struct rproc *rproc)
{
* If the remote processor is already powered on, this function immediately
* returns (successfully).
*
- * Returns 0 on success, and an appropriate error value otherwise.
+ * Return: 0 on success, and an appropriate error value otherwise
*/
int rproc_boot(struct rproc *rproc)
{
* no longer available. From there it should be possible to remove the
* platform driver and even power cycle the application processor (if the HW
* supports it) without needing to switch off the remote processor.
+ *
+ * Return: 0 on success, and an appropriate error value otherwise
*/
int rproc_detach(struct rproc *rproc)
{
* This function increments the remote processor's refcount, so always
* use rproc_put() to decrement it back once rproc isn't needed anymore.
*
- * Returns the rproc handle on success, and NULL on failure.
+ * Return: rproc handle on success, and NULL on failure
*/
#ifdef CONFIG_OF
struct rproc *rproc_get_by_phandle(phandle phandle)
* This is called by the platform-specific rproc implementation, whenever
* a new remote processor device is probed.
*
- * Returns 0 on success and an appropriate error code otherwise.
- *
* Note: this function initiates an asynchronous firmware loading
* context, which will look for virtio devices supported by the rproc's
* firmware.
* If found, those virtio devices will be created and added, so as a result
* of registering this remote processor, additional virtio drivers might be
* probed.
+ *
+ * Return: 0 on success and an appropriate error code otherwise
*/
int rproc_add(struct rproc *rproc)
{
struct device *dev = &rproc->dev;
int ret;
- ret = device_add(dev);
+ ret = rproc_validate(rproc);
if (ret < 0)
return ret;
- ret = rproc_validate(rproc);
+ /* add char device for this remoteproc */
+ ret = rproc_char_device_add(rproc);
if (ret < 0)
return ret;
+ ret = device_add(dev);
+ if (ret < 0) {
+ put_device(dev);
+ goto rproc_remove_cdev;
+ }
+
dev_info(dev, "%s is available\n", rproc->name);
/* create debugfs entries */
rproc_create_debug_dir(rproc);
- /* add char device for this remoteproc */
- ret = rproc_char_device_add(rproc);
- if (ret < 0)
- return ret;
-
/* if rproc is marked always-on, request it to boot */
if (rproc->auto_boot) {
ret = rproc_trigger_auto_boot(rproc);
if (ret < 0)
- return ret;
+ goto rproc_remove_dev;
}
/* expose to rproc_get_by_phandle users */
mutex_unlock(&rproc_list_mutex);
return 0;
+
+rproc_remove_dev:
+ rproc_delete_debug_dir(rproc);
+ device_del(dev);
+rproc_remove_cdev:
+ rproc_char_device_remove(rproc);
+ return ret;
}
EXPORT_SYMBOL(rproc_add);
* This function performs like rproc_add() but the registered rproc device will
* automatically be removed on driver detach.
*
- * Returns: 0 on success, negative errno on failure
+ * Return: 0 on success, negative errno on failure
*/
int devm_rproc_add(struct device *dev, struct rproc *rproc)
{
* implementations should then call rproc_add() to complete
* the registration of the remote processor.
*
- * On success the new rproc is returned, and on failure, NULL.
- *
* Note: _never_ directly deallocate @rproc, even if it was not registered
* yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+ *
+ * Return: new rproc pointer on success, and NULL on failure
*/
struct rproc *rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
* of the outstanding reference created by rproc_alloc. To decrement that
* one last refcount, one still needs to call rproc_free().
*
- * Returns 0 on success and -EINVAL if @rproc isn't valid.
+ * Return: 0 on success and -EINVAL if @rproc isn't valid
*/
int rproc_del(struct rproc *rproc)
{
mutex_unlock(&rproc->lock);
rproc_delete_debug_dir(rproc);
- rproc_char_device_remove(rproc);
/* the rproc is downref'ed as soon as it's removed from the klist */
mutex_lock(&rproc_list_mutex);
synchronize_rcu();
device_del(&rproc->dev);
+ rproc_char_device_remove(rproc);
return 0;
}
* This function performs like rproc_alloc() but the acquired rproc device will
* automatically be released on driver detach.
*
- * Returns: new rproc instance, or NULL on failure
+ * Return: new rproc instance, or NULL on failure
*/
struct rproc *devm_rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
* rproc_get_by_child() - acquire rproc handle of @dev's ancestor
* @dev: child device to find ancestor of
*
- * Returns the ancestor rproc instance, or NULL if not found.
+ * Return: the ancestor rproc instance, or NULL if not found
*/
struct rproc *rproc_get_by_child(struct device *dev)
{
git.samba.org / sfrench / cifs-2.6.git / blobdiff