[MTD] Remove trailing whitespace

[sfrench/cifs-2.6.git] / drivers / mtd / nand / cafe.c

diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c
index c0a5ec12590715bb9b06f0e023873d8074b43308..b8d9b64cccc0455b08dd3bf26274de91e940fb73 100644 (file)
--- a/drivers/mtd/nand/cafe.c
+++ b/drivers/mtd/nand/cafe.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
  *
  * Copyright © 2006 Red Hat, Inc.
@@ -60,7 +60,6 @@ struct cafe_priv {
        int page_addr;
        dma_addr_t dmaaddr;
        unsigned char *dmabuf;
-       
 };
 
 static int usedma = 1;
@@ -217,7 +216,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
                ctl1 |= ((adrbytes-1)|8) << 27;
 
        if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
-               /* Ignore the first command of a pair; the hardware 
+               /* Ignore the first command of a pair; the hardware
                   deals with them both at once, later */
                cafe->ctl1 = ctl1;
                cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
@@ -231,7 +230,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
                cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
 
  do_command:
-       cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n", 
+       cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
                cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
 
        /* NB: The datasheet lies -- we really should be subtracting 1 here */
@@ -380,7 +379,7 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
                        uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
                        syn[i] = tmp & 0xfff;
                        syn[i+1] = (tmp >> 16) & 0xfff;
-               } 
+               }
 
                if ((i = cafe_correct_ecc(buf, syn)) < 0) {
                        dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
@@ -404,7 +403,7 @@ static struct nand_ecclayout cafe_oobinfo_2048 = {
        .oobfree = {{14, 50}}
 };
 
-/* Ick. The BBT code really ought to be able to work this bit out 
+/* Ick. The BBT code really ought to be able to work this bit out
    for itself from the above, at least for the 2KiB case */
 static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
 static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
@@ -579,7 +578,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
                cafe->nand.options |= NAND_SKIP_BBTSCAN;
                cafe->nand.block_bad = cafe_nand_block_bad;
        }
-       
+
        /* Start off by resetting the NAND controller completely */
        cafe_writel(cafe, 1, NAND_RESET);
        cafe_writel(cafe, 0, NAND_RESET);
@@ -600,7 +599,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
        err = request_irq(pdev->irq, &cafe_nand_interrupt, SA_SHIRQ, "CAFE NAND", mtd);
        if (err) {
                dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-               
+
                goto out_free_dma;
        }
 #if 1
@@ -654,7 +653,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
        writel(0x84600070, cafe->mmio);
        udelay(10);
        cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
-#endif         
+#endif
        /* Scan to find existance of the device */
        if (nand_scan_ident(mtd, 1)) {
                err = -ENXIO;