ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)

[sfrench/cifs-2.6.git] / drivers / ide / ide-iops.c

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c19a221b1e183e9f9764d8b9ff70efc0c1499f94..06fe002116ecc733a1015216d7676e4b24439070 100644 (file)
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
 
 /*
  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
  * Some optical devices with the buggy firmwares have the same problem.
  */
 static const struct drive_list_entry ivb_list[] = {
@@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
         * - force bit13 (80c cable present) check also for !ivb devices
         *   (unless the slave device is pre-ATA3)
         */
-       if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
-           (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+       if (id[ATA_ID_HW_CONFIG] & 0x4000)
                return 1;
 
+       if (ivb) {
+               const char *model = (char *)&id[ATA_ID_PROD];
+
+               if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+                       /*
+                        * These ATAPI devices always report 80c cable
+                        * so we have to depend on the host in this case.
+                        */
+                       if (hwif->cbl == ATA_CBL_PATA80)
+                               return 1;
+               } else {
+                       /* Depend on the device side cable detection. */
+                       if (id[ATA_ID_HW_CONFIG] & 0x2000)
+                               return 1;
+               }
+       }
 no_80w:
        if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
                return 0;