* - 3.30.0 - Add AMDGPU_SCHED_OP_CONTEXT_PRIORITY_OVERRIDE.
* - 3.31.0 - Add support for per-flip tiling attribute changes with DC
* - 3.32.0 - Add syncobj timeline support to AMDGPU_CS.
+ * - 3.33.0 - Fixes for GDS ENOMEM failures in AMDGPU_CS.
*/
#define KMS_DRIVER_MAJOR 3
-#define KMS_DRIVER_MINOR 32
+#define KMS_DRIVER_MINOR 33
#define KMS_DRIVER_PATCHLEVEL 0
#define AMDGPU_MAX_TIMEOUT_PARAM_LENTH 256
int amdgpu_vm_block_size = -1;
int amdgpu_vm_fault_stop = 0;
int amdgpu_vm_debug = 0;
-int amdgpu_vram_page_split = 512;
int amdgpu_vm_update_mode = -1;
int amdgpu_exp_hw_support = 0;
int amdgpu_dc = -1;
uint amdgpu_smu_memory_pool_size = 0;
/* FBC (bit 0) disabled by default*/
uint amdgpu_dc_feature_mask = 0;
+int amdgpu_async_gfx_ring = 1;
+int amdgpu_mcbp = 0;
+int amdgpu_discovery = -1;
+int amdgpu_mes = 0;
+int amdgpu_noretry;
struct amdgpu_mgpu_info mgpu_info = {
.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
* By default(with no lockup_timeout settings), the timeout for all non-compute(GFX, SDMA and Video)
* jobs is 10000. And there is no timeout enforced on compute jobs.
*/
-MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms (default: 10000 for non-compute jobs and no timeout for compute jobs), "
+MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms (default: 10000 for non-compute jobs and infinity timeout for compute jobs."
+ " 0: keep default value. negative: infinity timeout), "
"format is [Non-Compute] or [GFX,Compute,SDMA,Video]");
module_param_string(lockup_timeout, amdgpu_lockup_timeout, sizeof(amdgpu_lockup_timeout), 0444);
/**
* DOC: dpm (int)
- * Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto).
+ * Override for dynamic power management setting
+ * (0 = disable, 1 = enable, 2 = enable sw smu driver for vega20)
+ * The default is -1 (auto).
*/
MODULE_PARM_DESC(dpm, "DPM support (1 = enable, 0 = disable, -1 = auto)");
module_param_named(dpm, amdgpu_dpm, int, 0444);
MODULE_PARM_DESC(vm_update_mode, "VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both");
module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);
-/**
- * DOC: vram_page_split (int)
- * Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512.
- */
-MODULE_PARM_DESC(vram_page_split, "Number of pages after we split VRAM allocations (default 512, -1 = disable)");
-module_param_named(vram_page_split, amdgpu_vram_page_split, int, 0444);
-
/**
* DOC: exp_hw_support (int)
* Enable experimental hw support (1 = enable). The default is 0 (disabled).
"0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444);
+/**
+ * DOC: async_gfx_ring (int)
+ * It is used to enable gfx rings that could be configured with different prioritites or equal priorities
+ */
+MODULE_PARM_DESC(async_gfx_ring,
+ "Asynchronous GFX rings that could be configured with either different priorities (HP3D ring and LP3D ring), or equal priorities (0 = disabled, 1 = enabled (default))");
+module_param_named(async_gfx_ring, amdgpu_async_gfx_ring, int, 0444);
+
+/**
+ * DOC: mcbp (int)
+ * It is used to enable mid command buffer preemption. (0 = disabled (default), 1 = enabled)
+ */
+MODULE_PARM_DESC(mcbp,
+ "Enable Mid-command buffer preemption (0 = disabled (default), 1 = enabled)");
+module_param_named(mcbp, amdgpu_mcbp, int, 0444);
+
+/**
+ * DOC: discovery (int)
+ * Allow driver to discover hardware IP information from IP Discovery table at the top of VRAM.
+ * (-1 = auto (default), 0 = disabled, 1 = enabled)
+ */
+MODULE_PARM_DESC(discovery,
+ "Allow driver to discover hardware IPs from IP Discovery table at the top of VRAM");
+module_param_named(discovery, amdgpu_discovery, int, 0444);
+
+/**
+ * DOC: mes (int)
+ * Enable Micro Engine Scheduler. This is a new hw scheduling engine for gfx, sdma, and compute.
+ * (0 = disabled (default), 1 = enabled)
+ */
+MODULE_PARM_DESC(mes,
+ "Enable Micro Engine Scheduler (0 = disabled (default), 1 = enabled)");
+module_param_named(mes, amdgpu_mes, int, 0444);
+
+MODULE_PARM_DESC(noretry,
+ "Disable retry faults (0 = retry enabled (default), 1 = retry disabled)");
+module_param_named(noretry, amdgpu_noretry, int, 0644);
+
#ifdef CONFIG_HSA_AMD
/**
* DOC: sched_policy (int)
MODULE_PARM_DESC(ignore_crat,
"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
-/**
- * DOC: noretry (int)
- * This parameter sets sh_mem_config.retry_disable. Default value, 0, enables retry.
- * Setting 1 disables retry.
- * Retry is needed for recoverable page faults.
- */
-int noretry;
-module_param(noretry, int, 0644);
-MODULE_PARM_DESC(noretry,
- "Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
-
/**
* DOC: halt_if_hws_hang (int)
* Halt if HWS hang is detected. Default value, 0, disables the halt on hang.
bool hws_gws_support;
module_param(hws_gws_support, bool, 0444);
MODULE_PARM_DESC(hws_gws_support, "MEC FW support gws barriers (false = not supported (Default), true = supported)");
+
+/**
+ * DOC: queue_preemption_timeout_ms (int)
+ * queue preemption timeout in ms (1 = Minimum, 9000 = default)
+ */
+int queue_preemption_timeout_ms = 9000;
+module_param(queue_preemption_timeout_ms, int, 0644);
+MODULE_PARM_DESC(queue_preemption_timeout_ms, "queue preemption timeout in ms (1 = Minimum, 9000 = default)");
#endif
/**
MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))");
module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444);
+/**
+ * DOC: abmlevel (uint)
+ * Override the default ABM (Adaptive Backlight Management) level used for DC
+ * enabled hardware. Requires DMCU to be supported and loaded.
+ * Valid levels are 0-4. A value of 0 indicates that ABM should be disabled by
+ * default. Values 1-4 control the maximum allowable brightness reduction via
+ * the ABM algorithm, with 1 being the least reduction and 4 being the most
+ * reduction.
+ *
+ * Defaults to 0, or disabled. Userspace can still override this level later
+ * after boot.
+ */
+uint amdgpu_dm_abm_level = 0;
+MODULE_PARM_DESC(abmlevel, "ABM level (0 = off (default), 1-4 = backlight reduction level) ");
+module_param_named(abmlevel, amdgpu_dm_abm_level, uint, 0444);
+
static const struct pci_device_id pciidlist[] = {
#ifdef CONFIG_DRM_AMDGPU_SI
{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
/* Raven */
{0x1002, 0x15dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RAVEN|AMD_IS_APU},
{0x1002, 0x15d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RAVEN|AMD_IS_APU},
+ /* Navi10 */
+ {0x1002, 0x7310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x7312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x7318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x7319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x731A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x731B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+ {0x1002, 0x731F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
{0, 0, 0}
};
* By default timeout for non compute jobs is 10000.
* And there is no timeout enforced on compute jobs.
*/
- adev->gfx_timeout = adev->sdma_timeout = adev->video_timeout = 10000;
+ adev->gfx_timeout = msecs_to_jiffies(10000);
+ adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout;
adev->compute_timeout = MAX_SCHEDULE_TIMEOUT;
if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENTH)) {
if (ret)
return ret;
- /* Invalidate 0 and negative values */
- if (timeout <= 0) {
+ if (timeout == 0) {
index++;
continue;
+ } else if (timeout < 0) {
+ timeout = MAX_SCHEDULE_TIMEOUT;
+ } else {
+ timeout = msecs_to_jiffies(timeout);
}
switch (index++) {
git.samba.org / sfrench / cifs-2.6.git / blobdiff