+++ /dev/null
-/*
- * Intel Multiprocessor Specification 1.1 and 1.4
- * compliant MP-table parsing routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Erich Boleyn : MP v1.4 and additional changes.
- * Alan Cox : Added EBDA scanning
- * Ingo Molnar : various cleanups and rewrites
- * Maciej W. Rozycki: Bits for default MP configurations
- * Paul Diefenbaugh: Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-#include <asm/bios_ebda.h>
-
-#include <mach_apic.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
-
-static int mp_current_pci_id = 0;
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
- int sum = 0;
-
- while (len--)
- sum += *mp++;
-
- return sum & 0xFF;
-}
-
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
-{
- int apicid;
- char *bootup_cpu = "";
-
- if (!(m->mpc_cpuflag & CPU_ENABLED)) {
- disabled_cpus++;
- return;
- }
-#ifdef CONFIG_X86_NUMAQ
- apicid = mpc_apic_id(m, translation_table[mpc_record]);
-#else
- apicid = m->mpc_apicid;
-#endif
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- bootup_cpu = " (Bootup-CPU)";
- boot_cpu_physical_apicid = m->mpc_apicid;
- }
-
- printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
- generic_processor_info(apicid, m->mpc_apicver);
-}
-
-static void __init MP_bus_info(struct mpc_config_bus *m)
-{
- char str[7];
-
- memcpy(str, m->mpc_bustype, 6);
- str[6] = 0;
-
-#ifdef CONFIG_X86_NUMAQ
- mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
- Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-#endif
-
-#if MAX_MP_BUSSES < 256
- if (m->mpc_busid >= MAX_MP_BUSSES) {
- printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
- " is too large, max. supported is %d\n",
- m->mpc_busid, str, MAX_MP_BUSSES - 1);
- return;
- }
-#endif
-
- if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
- set_bit(m->mpc_busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
-#endif
- } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
- mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
- clear_bit(m->mpc_busid, mp_bus_not_pci);
- mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
- mp_current_pci_id++;
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
- } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
- } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
-#endif
- } else
- printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
-}
-
-static int bad_ioapic(unsigned long address)
-{
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
- return 1;
- }
- return 0;
-}
-
-static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
-{
- if (!(m->mpc_flags & MPC_APIC_USABLE))
- return;
-
- printk(KERN_INFO "I/O APIC #%d at 0x%X.\n", m->mpc_apicid,
- m->mpc_apicaddr);
-
- if (bad_ioapic(m->mpc_apicaddr))
- return;
-
- mp_ioapics[nr_ioapics] = *m;
- nr_ioapics++;
-}
-
-static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
-{
- mp_irqs[mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
- if (++mp_irq_entries >= MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
-{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-/*
- * Read/parse the MPC
- */
-static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
-{
- char str[16];
- char oem[10];
- int count = sizeof(*mpc);
- unsigned char *mpt = ((unsigned char *)mpc) + count;
-
- if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
- printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
- mpc->mpc_signature[0], mpc->mpc_signature[1],
- mpc->mpc_signature[2], mpc->mpc_signature[3]);
- return 0;
- }
- if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
- printk(KERN_ERR "MPTABLE: checksum error!\n");
- return 0;
- }
- if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
- printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
- mpc->mpc_spec);
- return 0;
- }
- if (!mpc->mpc_lapic) {
- printk(KERN_ERR "MPTABLE: null local APIC address!\n");
- return 0;
- }
- memcpy(oem, mpc->mpc_oem, 8);
- oem[8] = 0;
- printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
-
- memcpy(str, mpc->mpc_productid, 12);
- str[12] = 0;
- printk("Product ID: %s ", str);
-
-#ifdef CONFIG_X86_32
- mps_oem_check(mpc, oem, str);
-#endif
- printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
-
- printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
-
- /* save the local APIC address, it might be non-default */
- if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
-
- if (early)
- return 1;
-
- /*
- * Now process the configuration blocks.
- */
-#ifdef CONFIG_X86_NUMAQ
- mpc_record = 0;
-#endif
- while (count < mpc->mpc_length) {
- switch (*mpt) {
- case MP_PROCESSOR:
- {
- struct mpc_config_processor *m =
- (struct mpc_config_processor *)mpt;
- /* ACPI may have already provided this data */
- if (!acpi_lapic)
- MP_processor_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_BUS:
- {
- struct mpc_config_bus *m =
- (struct mpc_config_bus *)mpt;
- MP_bus_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_IOAPIC:
- {
- struct mpc_config_ioapic *m =
- (struct mpc_config_ioapic *)mpt;
- MP_ioapic_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_INTSRC:
- {
- struct mpc_config_intsrc *m =
- (struct mpc_config_intsrc *)mpt;
-
- MP_intsrc_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_LINTSRC:
- {
- struct mpc_config_lintsrc *m =
- (struct mpc_config_lintsrc *)mpt;
- MP_lintsrc_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- default:
- {
- count = mpc->mpc_length;
- break;
- }
- }
-#ifdef CONFIG_X86_NUMAQ
- ++mpc_record;
-#endif
- }
- setup_apic_routing();
- if (!num_processors)
- printk(KERN_ERR "MPTABLE: no processors registered!\n");
- return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
- unsigned int port;
-
- port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
- struct mpc_config_intsrc intsrc;
- int i;
- int ELCR_fallback = 0;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
- intsrc.mpc_srcbus = 0;
- intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
- intsrc.mpc_irqtype = mp_INT;
-
- /*
- * If true, we have an ISA/PCI system with no IRQ entries
- * in the MP table. To prevent the PCI interrupts from being set up
- * incorrectly, we try to use the ELCR. The sanity check to see if
- * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
- * never be level sensitive, so we simply see if the ELCR agrees.
- * If it does, we assume it's valid.
- */
- if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... "
- "falling back to ELCR\n");
-
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
- ELCR_trigger(13))
- printk(KERN_ERR "ELCR contains invalid data... "
- "not using ELCR\n");
- else {
- printk(KERN_INFO
- "Using ELCR to identify PCI interrupts\n");
- ELCR_fallback = 1;
- }
- }
-
- for (i = 0; i < 16; i++) {
- switch (mpc_default_type) {
- case 2:
- if (i == 0 || i == 13)
- continue; /* IRQ0 & IRQ13 not connected */
- /* fall through */
- default:
- if (i == 2)
- continue; /* IRQ2 is never connected */
- }
-
- if (ELCR_fallback) {
- /*
- * If the ELCR indicates a level-sensitive interrupt, we
- * copy that information over to the MP table in the
- * irqflag field (level sensitive, active high polarity).
- */
- if (ELCR_trigger(i))
- intsrc.mpc_irqflag = 13;
- else
- intsrc.mpc_irqflag = 0;
- }
-
- intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
- MP_intsrc_info(&intsrc);
- }
-
- intsrc.mpc_irqtype = mp_ExtINT;
- intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
- MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
- struct mpc_config_processor processor;
- struct mpc_config_bus bus;
- struct mpc_config_ioapic ioapic;
- struct mpc_config_lintsrc lintsrc;
- int linttypes[2] = { mp_ExtINT, mp_NMI };
- int i;
-
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /*
- * 2 CPUs, numbered 0 & 1.
- */
- processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
- for (i = 0; i < 2; i++) {
- processor.mpc_apicid = i;
- MP_processor_info(&processor);
- }
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- switch (mpc_default_type) {
- default:
- printk(KERN_ERR "???\nUnknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
- }
- MP_bus_info(&bus);
- if (mpc_default_type > 4) {
- bus.mpc_busid = 1;
- memcpy(bus.mpc_bustype, "PCI ", 6);
- MP_bus_info(&bus);
- }
-
- ioapic.mpc_type = MP_IOAPIC;
- ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- ioapic.mpc_flags = MPC_APIC_USABLE;
- ioapic.mpc_apicaddr = 0xFEC00000;
- MP_ioapic_info(&ioapic);
-
- /*
- * We set up most of the low 16 IO-APIC pins according to MPS rules.
- */
- construct_default_ioirq_mptable(mpc_default_type);
-
- lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
- lintsrc.mpc_srcbusid = 0;
- lintsrc.mpc_srcbusirq = 0;
- lintsrc.mpc_destapic = MP_APIC_ALL;
- for (i = 0; i < 2; i++) {
- lintsrc.mpc_irqtype = linttypes[i];
- lintsrc.mpc_destapiclint = i;
- MP_lintsrc_info(&lintsrc);
- }
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-static void __init __get_smp_config(unsigned early)
-{
- struct intel_mp_floating *mpf = mpf_found;
-
- if (acpi_lapic && early)
- return;
- /*
- * ACPI supports both logical (e.g. Hyper-Threading) and physical
- * processors, where MPS only supports physical.
- */
- if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
- "information\n");
- return;
- } else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) "
- "configuration information\n");
-
- printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
- mpf->mpf_specification);
-#ifdef CONFIG_X86_32
- if (mpf->mpf_feature2 & (1 << 7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
- pic_mode = 1;
- } else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
- pic_mode = 0;
- }
-#endif
- /*
- * Now see if we need to read further.
- */
- if (mpf->mpf_feature1 != 0) {
- if (early) {
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- return;
- }
-
- printk(KERN_INFO "Default MP configuration #%d\n",
- mpf->mpf_feature1);
- construct_default_ISA_mptable(mpf->mpf_feature1);
-
- } else if (mpf->mpf_physptr) {
-
- /*
- * Read the physical hardware table. Anything here will
- * override the defaults.
- */
- if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
- smp_found_config = 0;
- printk(KERN_ERR
- "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. "
- "(tell your hw vendor)\n");
- return;
- }
-
- if (early)
- return;
- /*
- * If there are no explicit MP IRQ entries, then we are
- * broken. We set up most of the low 16 IO-APIC pins to
- * ISA defaults and hope it will work.
- */
- if (!mp_irq_entries) {
- struct mpc_config_bus bus;
-
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, "
- "using default mptable. "
- "(tell your hw vendor)\n");
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- memcpy(bus.mpc_bustype, "ISA ", 6);
- MP_bus_info(&bus);
-
- construct_default_ioirq_mptable(0);
- }
-
- } else
- BUG();
-
- if (!early)
- printk(KERN_INFO "Processors: %d\n", num_processors);
- /*
- * Only use the first configuration found.
- */
-}
-
-void __init early_get_smp_config(void)
-{
- __get_smp_config(1);
-}
-
-void __init get_smp_config(void)
-{
- __get_smp_config(0);
-}
-
-static int __init smp_scan_config(unsigned long base, unsigned long length,
- unsigned reserve)
-{
- extern void __bad_mpf_size(void);
- unsigned int *bp = phys_to_virt(base);
- struct intel_mp_floating *mpf;
-
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
- if (sizeof(*mpf) != 16)
- __bad_mpf_size();
-
- while (length > 0) {
- mpf = (struct intel_mp_floating *)bp;
- if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4))) {
-
- smp_found_config = 1;
- mpf_found = mpf;
-#ifdef CONFIG_X86_32
- printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
- mpf, virt_to_phys(mpf));
- reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
- BOOTMEM_DEFAULT);
- if (mpf->mpf_physptr) {
- /*
- * We cannot access to MPC table to compute
- * table size yet, as only few megabytes from
- * the bottom is mapped now.
- * PC-9800's MPC table places on the very last
- * of physical memory; so that simply reserving
- * PAGE_SIZE from mpg->mpf_physptr yields BUG()
- * in reserve_bootmem.
- */
- unsigned long size = PAGE_SIZE;
- unsigned long end = max_low_pfn * PAGE_SIZE;
- if (mpf->mpf_physptr + size > end)
- size = end - mpf->mpf_physptr;
- reserve_bootmem(mpf->mpf_physptr, size,
- BOOTMEM_DEFAULT);
- }
-
-#else
- if (!reserve)
- return 1;
-
- reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
- if (mpf->mpf_physptr)
- reserve_bootmem_generic(mpf->mpf_physptr,
- PAGE_SIZE);
-#endif
- return 1;
- }
- bp += 4;
- length -= 16;
- }
- return 0;
-}
-
-static void __init __find_smp_config(unsigned reserve)
-{
- unsigned int address;
-
- /*
- * FIXME: Linux assumes you have 640K of base ram..
- * this continues the error...
- *
- * 1) Scan the bottom 1K for a signature
- * 2) Scan the top 1K of base RAM
- * 3) Scan the 64K of bios
- */
- if (smp_scan_config(0x0, 0x400, reserve) ||
- smp_scan_config(639 * 0x400, 0x400, reserve) ||
- smp_scan_config(0xF0000, 0x10000, reserve))
- return;
- /*
- * If it is an SMP machine we should know now.
- *
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E, calculate and scan it here.
- *
- * NOTE! There are Linux loaders that will corrupt the EBDA
- * area, and as such this kind of SMP config may be less
- * trustworthy, simply because the SMP table may have been
- * stomped on during early boot. These loaders are buggy and
- * should be fixed.
- *
- * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
- */
-
- address = get_bios_ebda();
- if (address)
- smp_scan_config(address, 0x400, reserve);
-}
-
-void __init early_find_smp_config(void)
-{
- __find_smp_config(0);
-}
-
-void __init find_smp_config(void)
-{
- __find_smp_config(1);
-}
-
-/* --------------------------------------------------------------------------
- ACPI-based MP Configuration
- -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#ifdef CONFIG_X86_IO_APIC
-
-#define MP_ISA_BUS 0
-#define MP_MAX_IOAPIC_PIN 127
-
-extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic(int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
- return -1;
-}
-
-static u8 uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return io_apic_get_unique_id(nr_ioapics, id);
- else
- return id;
-#else
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_config_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->mpc_apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
-#endif
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
-
- idx = nr_ioapics;
-
- mp_ioapics[idx].mpc_type = MP_IOAPIC;
- mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
- mp_ioapics[idx].mpc_apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-#else
- mp_ioapics[idx].mpc_apicver = 0;
-#endif
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
-
-void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
- struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
-
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_irqflag = (trigger << 2) | polarity;
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
-}
-
-int es7000_plat;
-
-void __init mp_config_acpi_legacy_irqs(void)
-{
- struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
-
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
- /*
- * Fabricate the legacy ISA bus (bus #31).
- */
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
-#endif
- set_bit(MP_ISA_BUS, mp_bus_not_pci);
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
-
- /*
- * Older generations of ES7000 have no legacy identity mappings
- */
- if (es7000_plat == 1)
- return;
-
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
- */
- ioapic = mp_find_ioapic(0);
- if (ioapic < 0)
- return;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
- /*
- * Use the default configuration for the IRQs 0-15. Unless
- * overridden by (MADT) interrupt source override entries.
- */
- for (i = 0; i < 16; i++) {
- int idx;
-
- for (idx = 0; idx < mp_irq_entries; idx++) {
- struct mpc_config_intsrc *irq = mp_irqs + idx;
-
- /* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS
- && irq->mpc_srcbusirq == i)
- break;
-
- /* Do we already have a mapping for this IOAPIC pin */
- if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
- break;
- }
-
- if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
- }
-
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
- intsrc.mpc_dstirq = i;
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
- intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
- }
-}
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
-
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return gsi;
-#endif
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
-
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
-
- ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
-#ifdef CONFIG_X86_32
- if (ioapic_renumber_irq)
- gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- bit = ioapic_pin % 32;
- idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
- if (idx > 3) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
- return gsi;
- }
- if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
- return gsi;
-#endif
- }
-
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
git.samba.org / sfrench / cifs-2.6.git / blobdiff