powerpc: Remove arch/ppc and include/asm-ppc
[sfrench/cifs-2.6.git] / arch / ppc / syslib / m82xx_pci.c
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
deleted file mode 100644 (file)
index 657a1c2..0000000
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-/*
- * Interrupt routing
- */
-
-static inline int
-pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-       static char pci_irq_table[][4] =
-       /*
-        *      PCI IDSEL/INTPIN->INTLINE
-        *        A      B      C      D
-        */
-       {
-               { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
-               { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
-               { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
-       };
-
-       const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
-       return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void
-pq2pci_mask_irq(unsigned int irq)
-{
-       int bit = irq - NR_CPM_INTS;
-
-       *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-       return;
-}
-
-static void
-pq2pci_unmask_irq(unsigned int irq)
-{
-       int bit = irq - NR_CPM_INTS;
-
-       *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-       return;
-}
-
-static void
-pq2pci_mask_and_ack(unsigned int irq)
-{
-       int bit = irq - NR_CPM_INTS;
-
-       *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-       return;
-}
-
-static void
-pq2pci_end_irq(unsigned int irq)
-{
-       int bit = irq - NR_CPM_INTS;
-
-       *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-       return;
-}
-
-struct hw_interrupt_type pq2pci_ic = {
-       "PQ2 PCI",
-       NULL,
-       NULL,
-       pq2pci_unmask_irq,
-       pq2pci_mask_irq,
-       pq2pci_mask_and_ack,
-       pq2pci_end_irq,
-       0
-};
-
-static irqreturn_t
-pq2pci_irq_demux(int irq, void *dev_id)
-{
-       unsigned long stat, mask, pend;
-       int bit;
-
-       for(;;) {
-               stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
-               mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
-               pend = stat & ~mask & 0xf0000000;
-               if (!pend)
-                       break;
-               for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-                       if (pend & 0x80000000)
-                               __do_IRQ(NR_CPM_INTS + bit);
-               }
-       }
-
-       return IRQ_HANDLED;
-}
-
-static struct irqaction pq2pci_irqaction = {
-       .handler = pq2pci_irq_demux,
-       .flags   = IRQF_DISABLED,
-       .mask    = CPU_MASK_NONE,
-       .name    = "PQ2 PCI cascade",
-};
-
-
-void
-pq2pci_init_irq(void)
-{
-       int irq;
-       volatile cpm2_map_t *immap = cpm2_immr;
-       for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
-               irq_desc[irq].chip = &pq2pci_ic;
-
-       /* make PCI IRQ level sensitive */
-       immap->im_intctl.ic_siexr &=
-               ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
-
-       /* mask all PCI interrupts */
-       *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
-
-       /* install the demultiplexer for the PCI cascade interrupt */
-       setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
-       return;
-}
-
-static int
-pq2pci_exclude_device(u_char bus, u_char devfn)
-{
-       return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI bus configuration registers.
- */
-static void
-pq2ads_setup_pci(struct pci_controller *hose)
-{
-       __u32 val;
-       volatile cpm2_map_t *immap = cpm2_immr;
-       bd_t* binfo = (bd_t*) __res;
-       u32 sccr = immap->im_clkrst.car_sccr;
-       uint pci_div,freq,time;
-               /* PCI int lowest prio */
-       /* Each 4 bits is a device bus request  and the MS 4bits
-        is highest priority */
-       /* Bus                4bit value
-          ---                ----------
-          CPM high             0b0000
-          CPM middle           0b0001
-          CPM low              0b0010
-          PCI request          0b0011
-          Reserved             0b0100
-          Reserved             0b0101
-          Internal Core        0b0110
-          External Master 1    0b0111
-          External Master 2    0b1000
-          External Master 3    0b1001
-          The rest are reserved
-        */
-       immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-       /* park bus on core */
-       immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
-       /*
-        * Set up master windows that allow the CPU to access PCI space. These
-        * windows are set up using the two SIU PCIBR registers.
-        */
-
-       immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
-       immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
-
-#ifdef M82xx_PCI_SEC_WND_SIZE
-       immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
-       immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
-#endif
-
-       /* Enable PCI  */
-       immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-       pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-                       ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
-       freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-       time = (int)66666666/freq;
-
-       /* due to PCI Local Bus spec, some devices needs to wait such a long
-       time after RST  deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
-       printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
-       (time==1) ? "0.5 seconds":"1 second" );
-
-       {
-               int i;
-               for(i=0;i<(500*time);i++)
-                       udelay(1000);
-       }
-
-       /* setup ATU registers */
-       immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
-                               ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
-       immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
-       immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
-
-       /* Set-up non-prefetchable window */
-       immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
-       immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
-       immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
-
-       /* Set-up prefetchable window */
-       immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
-               (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
-       immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
-       immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
-
-       /* Inbound transactions from PCI memory space */
-       immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
-                                       ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
-       immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
-       immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
-
-       /* park bus on PCI */
-       immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-       /* Enable bus mastering and inbound memory transactions */
-       early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
-       val &= 0xffff0000;
-       val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
-       early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
-
-}
-
-void __init pq2_find_bridges(void)
-{
-       extern int pci_assign_all_buses;
-       struct pci_controller * hose;
-       int host_bridge;
-
-       pci_assign_all_buses = 1;
-
-       hose = pcibios_alloc_controller();
-
-       if (!hose)
-               return;
-
-       ppc_md.pci_swizzle = common_swizzle;
-
-       hose->first_busno = 0;
-       hose->bus_offset = 0;
-       hose->last_busno = 0xff;
-
-       setup_m8260_indirect_pci(hose,
-                                (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-                                (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-       /* Make sure it is a supported bridge */
-       early_read_config_dword(hose,
-                               0,
-                               PCI_DEVFN(0,0),
-                               PCI_VENDOR_ID,
-                               &host_bridge);
-       switch (host_bridge) {
-               case PCI_DEVICE_ID_MPC8265:
-                       break;
-               case PCI_DEVICE_ID_MPC8272:
-                       break;
-               default:
-                       printk("Attempting to use unrecognized host bridge ID"
-                               " 0x%08x.\n", host_bridge);
-                       break;
-       }
-
-       pq2ads_setup_pci(hose);
-
-       hose->io_space.start =  M82xx_PCI_LOWER_IO;
-       hose->io_space.end = M82xx_PCI_UPPER_IO;
-       hose->mem_space.start = M82xx_PCI_LOWER_MEM;
-       hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
-       hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
-
-       isa_io_base =
-       (unsigned long) ioremap(M82xx_PCI_IO_BASE,
-                                       M82xx_PCI_IO_SIZE);
-       hose->io_base_virt = (void *) isa_io_base;
-
-       /* setup resources */
-       pci_init_resource(&hose->mem_resources[0],
-                       M82xx_PCI_LOWER_MEM,
-                       M82xx_PCI_UPPER_MEM,
-                       IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-       pci_init_resource(&hose->mem_resources[1],
-                       M82xx_PCI_LOWER_MMIO,
-                       M82xx_PCI_UPPER_MMIO,
-                       IORESOURCE_MEM, "PCI memory");
-
-       pci_init_resource(&hose->io_resource,
-                       M82xx_PCI_LOWER_IO,
-                       M82xx_PCI_UPPER_IO,
-                       IORESOURCE_IO | 1, "PCI I/O");
-
-       ppc_md.pci_exclude_device = pq2pci_exclude_device;
-       hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-       ppc_md.pci_map_irq = pq2pci_map_irq;
-       ppc_md.pcibios_fixup = NULL;
-       ppc_md.pcibios_fixup_bus = NULL;
-
-}