powerpc: Remove arch/ppc and include/asm-ppc

[sfrench/cifs-2.6.git] / arch / ppc / platforms / pal4_setup.c

diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c
deleted file mode 100644 (file)
index 3da47d9..0000000
--- a/arch/ppc/platforms/pal4_setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Board setup routines for the SBS PalomarIV.
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <linux/kdev_t.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-extern void pal4_find_bridges(void);
-
-unsigned int cpc700_irq_assigns[][2] = {
-        {1, 1},    /* IRQ 0: ECC correctable error */
-        {1, 1},    /* IRQ 1: PCI write to memory range */
-        {0, 1},    /* IRQ 2: PCI write to command register */
-        {0, 1},    /* IRQ 3: UART 0 */
-        {0, 1},    /* IRQ 4: UART 1 */
-        {0, 1},    /* IRQ 5: ICC 0 */
-        {0, 1},    /* IRQ 6: ICC 1 */
-        {0, 1},    /* IRQ 7: GPT compare 0 */
-        {0, 1},    /* IRQ 8: GPT compare 1 */
-        {0, 1},    /* IRQ 9: GPT compare 2 */
-        {0, 1},    /* IRQ 10: GPT compare 3 */
-        {0, 1},    /* IRQ 11: GPT compare 4 */
-        {0, 1},    /* IRQ 12: GPT capture 0 */
-        {0, 1},    /* IRQ 13: GPT capture 1 */
-        {0, 1},    /* IRQ 14: GPT capture 2 */
-        {0, 1},    /* IRQ 15: GPT capture 3 */
-        {0, 1},    /* IRQ 16: GPT capture 4 */
-        {0, 0},    /* IRQ 17: reserved */
-        {0, 0},    /* IRQ 18: reserved */
-        {0, 0},    /* IRQ 19: reserved */
-        {0, 0},    /* IRQ 20: reserved */
-        {0, 1},    /* IRQ 21: Ethernet */
-        {0, 0},    /* IRQ 22: reserved */
-        {0, 0},    /* IRQ 23: reserved */
-        {0, 0},    /* IRQ 24: resreved */
-        {0, 0},    /* IRQ 25: reserved */
-        {0, 0},    /* IRQ 26: reserved */
-        {0, 0},    /* IRQ 27: reserved */
-        {0, 0},    /* IRQ 28: reserved */
-        {0, 0},    /* IRQ 29: reserved */
-        {0, 0},    /* IRQ 30: reserved */
-        {0, 0},    /* IRQ 31: reserved */
-};
-
-static int
-pal4_show_cpuinfo(struct seq_file *m)
-{
-        seq_printf(m, "board\t\t: SBS Palomar IV\n");
-
-        return 0;
-}
-
-static void
-pal4_restart(char *cmd)
-{
-        local_irq_disable();
-        __asm__ __volatile__("lis  3,0xfff0\n \
-                              ori  3,3,0x100\n \
-                              mtspr 26,3\n \
-                              li   3,0\n \
-                              mtspr 27,3\n \
-                              rfi");
-
-        for(;;);
-}
-
-static void
-pal4_power_off(void)
-{
-       local_irq_disable();
-       for(;;);
-}
-
-static void
-pal4_halt(void)
-{
-       pal4_power_off();
-}
-
-TODC_ALLOC();
-
-static void __init
-pal4_setup_arch(void)
-{
-       unsigned long l2;
-
-       TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-                 ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
-
-       pal4_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-       if (initrd_start)
-               ROOT_DEV = Root_RAM0;
-       else
-#endif
-               ROOT_DEV = Root_NFS;
-
-       /* The L2 gets disabled in the bootloader, but all the proper
-          bits should be present from the fw, so just re-enable it */
-       l2 = _get_L2CR();
-       if (!(l2 & L2CR_L2E)) {
-               /* presume that it was initially set if the size is
-                  still present. */
-               if (l2 ^ L2CR_L2SIZ_MASK)
-                       _set_L2CR(l2 | L2CR_L2E);
-               else
-                       printk("L2 not set by firmware; left disabled.\n");
-       }
-}
-
-static void __init
-pal4_map_io(void)
-{
-       io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-             unsigned long r6, unsigned long r7)
-{
-       parse_bootinfo(find_bootinfo());
-
-       isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
-       pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
-
-       ppc_md.setup_arch = pal4_setup_arch;
-       ppc_md.show_cpuinfo = pal4_show_cpuinfo;
-
-       ppc_md.setup_io_mappings = pal4_map_io;
-
-       ppc_md.init_IRQ = cpc700_init_IRQ;
-       ppc_md.get_irq = cpc700_get_irq;
-
-       ppc_md.restart = pal4_restart;
-       ppc_md.halt = pal4_halt;
-       ppc_md.power_off = pal4_power_off;
-
-       ppc_md.time_init = todc_time_init;
-       ppc_md.set_rtc_time = todc_set_rtc_time;
-       ppc_md.get_rtc_time = todc_get_rtc_time;
-       ppc_md.calibrate_decr = todc_calibrate_decr;
-
-       ppc_md.nvram_read_val = todc_direct_read_val;
-       ppc_md.nvram_write_val = todc_direct_write_val;
-}
-