powerpc: Remove arch/ppc and include/asm-ppc
[sfrench/cifs-2.6.git] / arch / ppc / kernel / smp.c
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
deleted file mode 100644 (file)
index 0559985..0000000
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Smp support for ppc.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/thread_info.h>
-#include <asm/tlbflush.h>
-#include <asm/xmon.h>
-#include <asm/machdep.h>
-
-volatile int smp_commenced;
-int smp_tb_synchronized;
-struct cpuinfo_PPC cpu_data[NR_CPUS];
-atomic_t ipi_recv;
-atomic_t ipi_sent;
-cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-static struct task_struct *idle_tasks[NR_CPUS];
-
-EXPORT_SYMBOL(cpu_online_map);
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* SMP operations for this machine */
-struct smp_ops_t *smp_ops;
-
-/* all cpu mappings are 1-1 -- Cort */
-volatile unsigned long cpu_callin_map[NR_CPUS];
-
-int start_secondary(void *);
-void smp_call_function_interrupt(void);
-static int __smp_call_function(void (*func) (void *info), void *info,
-                              int wait, int target);
-
-/* Low level assembly function used to backup CPU 0 state */
-extern void __save_cpu_setup(void);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION  0
-#define PPC_MSG_RESCHEDULE     1
-#define PPC_MSG_INVALIDATE_TLB 2
-#define PPC_MSG_XMON_BREAK     3
-
-static inline void
-smp_message_pass(int target, int msg)
-{
-       if (smp_ops) {
-               atomic_inc(&ipi_sent);
-               smp_ops->message_pass(target, msg);
-       }
-}
-
-/*
- * Common functions
- */
-void smp_message_recv(int msg)
-{
-       atomic_inc(&ipi_recv);
-
-       switch( msg ) {
-       case PPC_MSG_CALL_FUNCTION:
-               smp_call_function_interrupt();
-               break;
-       case PPC_MSG_RESCHEDULE:
-               set_need_resched();
-               break;
-       case PPC_MSG_INVALIDATE_TLB:
-               _tlbia();
-               break;
-#ifdef CONFIG_XMON
-       case PPC_MSG_XMON_BREAK:
-               xmon(get_irq_regs());
-               break;
-#endif /* CONFIG_XMON */
-       default:
-               printk("SMP %d: smp_message_recv(): unknown msg %d\n",
-                      smp_processor_id(), msg);
-               break;
-       }
-}
-
-/*
- * 750's don't broadcast tlb invalidates so
- * we have to emulate that behavior.
- *   -- Cort
- */
-void smp_send_tlb_invalidate(int cpu)
-{
-       if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
-               smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB);
-}
-
-void smp_send_reschedule(int cpu)
-{
-       /*
-        * This is only used if `cpu' is running an idle task,
-        * so it will reschedule itself anyway...
-        *
-        * This isn't the case anymore since the other CPU could be
-        * sleeping and won't reschedule until the next interrupt (such
-        * as the timer).
-        *  -- Cort
-        */
-       /* This is only used if `cpu' is running an idle task,
-          so it will reschedule itself anyway... */
-       smp_message_pass(cpu, PPC_MSG_RESCHEDULE);
-}
-
-#ifdef CONFIG_XMON
-void smp_send_xmon_break(int cpu)
-{
-       smp_message_pass(cpu, PPC_MSG_XMON_BREAK);
-}
-#endif /* CONFIG_XMON */
-
-static void stop_this_cpu(void *dummy)
-{
-       local_irq_disable();
-       while (1)
-               ;
-}
-
-void smp_send_stop(void)
-{
-       smp_call_function(stop_this_cpu, NULL, 1, 0);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-       void (*func) (void *info);
-       void *info;
-       atomic_t started;
-       atomic_t finished;
-       int wait;
-} *call_data;
-
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-                     int wait)
-/*
- * [SUMMARY] Run a function on all other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-{
-       /* FIXME: get cpu lock with hotplug cpus, or change this to
-           bitmask. --RR */
-       if (num_online_cpus() <= 1)
-               return 0;
-       /* Can deadlock when called with interrupts disabled */
-       WARN_ON(irqs_disabled());
-       return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
-}
-
-static int __smp_call_function(void (*func) (void *info), void *info,
-                              int wait, int target)
-{
-       struct call_data_struct data;
-       int ret = -1;
-       int timeout;
-       int ncpus = 1;
-
-       if (target == MSG_ALL_BUT_SELF)
-               ncpus = num_online_cpus() - 1;
-       else if (target == MSG_ALL)
-               ncpus = num_online_cpus();
-
-       data.func = func;
-       data.info = info;
-       atomic_set(&data.started, 0);
-       data.wait = wait;
-       if (wait)
-               atomic_set(&data.finished, 0);
-
-       spin_lock(&call_lock);
-       call_data = &data;
-       /* Send a message to all other CPUs and wait for them to respond */
-       smp_message_pass(target, PPC_MSG_CALL_FUNCTION);
-
-       /* Wait for response */
-       timeout = 1000000;
-       while (atomic_read(&data.started) != ncpus) {
-               if (--timeout == 0) {
-                       printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
-                              smp_processor_id(), atomic_read(&data.started));
-                       goto out;
-               }
-               barrier();
-               udelay(1);
-       }
-
-       if (wait) {
-               timeout = 1000000;
-               while (atomic_read(&data.finished) != ncpus) {
-                       if (--timeout == 0) {
-                               printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
-                                      smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
-                               goto out;
-                       }
-                       barrier();
-                       udelay(1);
-               }
-       }
-       ret = 0;
-
- out:
-       spin_unlock(&call_lock);
-       return ret;
-}
-
-void smp_call_function_interrupt(void)
-{
-       void (*func) (void *info) = call_data->func;
-       void *info = call_data->info;
-       int wait = call_data->wait;
-
-       /*
-        * Notify initiating CPU that I've grabbed the data and am
-        * about to execute the function
-        */
-       atomic_inc(&call_data->started);
-       /*
-        * At this point the info structure may be out of scope unless wait==1
-        */
-       (*func)(info);
-       if (wait)
-               atomic_inc(&call_data->finished);
-}
-
-static void __devinit smp_store_cpu_info(int id)
-{
-        struct cpuinfo_PPC *c = &cpu_data[id];
-
-       /* assume bogomips are same for everything */
-        c->loops_per_jiffy = loops_per_jiffy;
-        c->pvr = mfspr(SPRN_PVR);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-       int num_cpus, i, cpu;
-       struct task_struct *p;
-
-       /* Fixup boot cpu */
-        smp_store_cpu_info(smp_processor_id());
-       cpu_callin_map[smp_processor_id()] = 1;
-
-       if (smp_ops == NULL) {
-               printk("SMP not supported on this machine.\n");
-               return;
-       }
-
-       /* Probe platform for CPUs: always linear. */
-       num_cpus = smp_ops->probe();
-       
-       if (num_cpus < 2)
-               smp_tb_synchronized = 1;
-       
-       for (i = 0; i < num_cpus; ++i)
-               cpu_set(i, cpu_possible_map);
-
-       /* Backup CPU 0 state */
-       __save_cpu_setup();
-
-       for_each_possible_cpu(cpu) {
-               if (cpu == smp_processor_id())
-                       continue;
-               /* create a process for the processor */
-               p = fork_idle(cpu);
-               if (IS_ERR(p))
-                       panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-               task_thread_info(p)->cpu = cpu;
-               idle_tasks[cpu] = p;
-       }
-}
-
-void __devinit smp_prepare_boot_cpu(void)
-{
-       cpu_set(smp_processor_id(), cpu_online_map);
-       cpu_set(smp_processor_id(), cpu_possible_map);
-}
-
-int __init setup_profiling_timer(unsigned int multiplier)
-{
-       return 0;
-}
-
-/* Processor coming up starts here */
-int __devinit start_secondary(void *unused)
-{
-       int cpu;
-
-       atomic_inc(&init_mm.mm_count);
-       current->active_mm = &init_mm;
-
-       cpu = smp_processor_id();
-        smp_store_cpu_info(cpu);
-       set_dec(tb_ticks_per_jiffy);
-       preempt_disable();
-       cpu_callin_map[cpu] = 1;
-
-       printk("CPU %d done callin...\n", cpu);
-       smp_ops->setup_cpu(cpu);
-       printk("CPU %d done setup...\n", cpu);
-       smp_ops->take_timebase();
-       printk("CPU %d done timebase take...\n", cpu);
-
-       spin_lock(&call_lock);
-       cpu_set(cpu, cpu_online_map);
-       spin_unlock(&call_lock);
-
-       local_irq_enable();
-
-       cpu_idle();
-       return 0;
-}
-
-int __cpu_up(unsigned int cpu)
-{
-       char buf[32];
-       int c;
-
-       secondary_ti = task_thread_info(idle_tasks[cpu]);
-       mb();
-
-       /*
-        * There was a cache flush loop here to flush the cache
-        * to memory for the first 8MB of RAM.  The cache flush
-        * has been pushed into the kick_cpu function for those
-        * platforms that need it.
-        */
-
-       /* wake up cpu */
-       smp_ops->kick_cpu(cpu);
-       
-       /*
-        * wait to see if the cpu made a callin (is actually up).
-        * use this value that I found through experimentation.
-        * -- Cort
-        */
-       for (c = 1000; c && !cpu_callin_map[cpu]; c--)
-               udelay(100);
-
-       if (!cpu_callin_map[cpu]) {
-               sprintf(buf, "didn't find cpu %u", cpu);
-               if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu);
-               printk("Processor %u is stuck.\n", cpu);
-               return -ENOENT;
-       }
-
-       sprintf(buf, "found cpu %u", cpu);
-       if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu);
-       printk("Processor %d found.\n", cpu);
-
-       smp_ops->give_timebase();
-
-       /* Wait until cpu puts itself in the online map */
-       while (!cpu_online(cpu))
-               cpu_relax();
-
-       return 0;
-}
-
-void smp_cpus_done(unsigned int max_cpus)
-{
-       smp_ops->setup_cpu(0);
-}