mn10300: Remove the architecture

[sfrench/cifs-2.6.git] / arch / mn10300 / unit-asb2303 / flash.c

diff --git a/arch/mn10300/unit-asb2303/flash.c b/arch/mn10300/unit-asb2303/flash.c
deleted file mode 100644 (file)
index b03d873..0000000
--- a/arch/mn10300/unit-asb2303/flash.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* Handle mapping of the flash on the ASB2303 board
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#define ASB2303_PROM_ADDR      0xA0000000      /* Boot PROM */
-#define ASB2303_PROM_SIZE      (2 * 1024 * 1024)
-#define ASB2303_FLASH_ADDR     0xA4000000      /* System Flash */
-#define ASB2303_FLASH_SIZE     (32 * 1024 * 1024)
-#define ASB2303_CONFIG_ADDR    0xA6000000      /* System Config EEPROM */
-#define ASB2303_CONFIG_SIZE    (8 * 1024)
-
-/*
- * default MTD partition table for both main flash devices, expected to be
- * overridden by RedBoot
- */
-static struct mtd_partition asb2303_partitions[] = {
-       {
-               .name           = "Bootloader",
-               .size           = 0x00040000,
-               .offset         = 0,
-               .mask_flags     = MTD_CAP_ROM /* force read-only */
-       }, {
-               .name           = "Kernel",
-               .size           = 0x00400000,
-               .offset         = 0x00040000,
-       }, {
-               .name           = "Filesystem",
-               .size           = MTDPART_SIZ_FULL,
-               .offset         = 0x00440000
-       }
-};
-
-/*
- * the ASB2303 Boot PROM definition
- */
-static struct physmap_flash_data asb2303_bootprom_data = {
-       .width          = 2,
-       .nr_parts       = 1,
-       .parts          = asb2303_partitions,
-};
-
-static struct resource asb2303_bootprom_resource = {
-       .start          = ASB2303_PROM_ADDR,
-       .end            = ASB2303_PROM_ADDR + ASB2303_PROM_SIZE,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device asb2303_bootprom = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev.platform_data = &asb2303_bootprom_data,
-       .num_resources  = 1,
-       .resource       = &asb2303_bootprom_resource,
-};
-
-/*
- * the ASB2303 System Flash definition
- */
-static struct physmap_flash_data asb2303_sysflash_data = {
-       .width          = 4,
-       .nr_parts       = 1,
-       .parts          = asb2303_partitions,
-};
-
-static struct resource asb2303_sysflash_resource = {
-       .start          = ASB2303_FLASH_ADDR,
-       .end            = ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device asb2303_sysflash = {
-       .name           = "physmap-flash",
-       .id             = 1,
-       .dev.platform_data = &asb2303_sysflash_data,
-       .num_resources  = 1,
-       .resource       = &asb2303_sysflash_resource,
-};
-
-/*
- * register the ASB2303 flashes
- */
-static int __init asb2303_mtd_init(void)
-{
-       platform_device_register(&asb2303_bootprom);
-       platform_device_register(&asb2303_sysflash);
-       return 0;
-}
-device_initcall(asb2303_mtd_init);