mn10300: Remove the architecture
[sfrench/cifs-2.6.git] / arch / mn10300 / kernel / smp.c
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
deleted file mode 100644 (file)
index 35d2c3f..0000000
+++ /dev/null
@@ -1,1186 +0,0 @@
-/* SMP support routines.
- *
- * Copyright (C) 2006-2008 Panasonic Corporation
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/task.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <asm/tlbflush.h>
-#include <asm/bitops.h>
-#include <asm/processor.h>
-#include <asm/bug.h>
-#include <asm/exceptions.h>
-#include <asm/hardirq.h>
-#include <asm/fpu.h>
-#include <asm/mmu_context.h>
-#include <asm/thread_info.h>
-#include <asm/cpu-regs.h>
-#include <asm/intctl-regs.h>
-#include "internal.h"
-
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/cacheflush.h>
-
-static unsigned long sleep_mode[NR_CPUS];
-
-static void run_sleep_cpu(unsigned int cpu);
-static void run_wakeup_cpu(unsigned int cpu);
-#endif /* CONFIG_HOTPLUG_CPU */
-
-/*
- * Debug Message function
- */
-
-#undef DEBUG_SMP
-#ifdef DEBUG_SMP
-#define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__)
-#else
-#define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__)
-#endif
-
-/* timeout value in msec for smp_nmi_call_function. zero is no timeout. */
-#define        CALL_FUNCTION_NMI_IPI_TIMEOUT   0
-
-/*
- * Structure and data for smp_nmi_call_function().
- */
-struct nmi_call_data_struct {
-       smp_call_func_t func;
-       void            *info;
-       cpumask_t       started;
-       cpumask_t       finished;
-       int             wait;
-       char            size_alignment[0]
-       __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
-} __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
-
-static DEFINE_SPINLOCK(smp_nmi_call_lock);
-static struct nmi_call_data_struct *nmi_call_data;
-
-/*
- * Data structures and variables
- */
-static cpumask_t cpu_callin_map;       /* Bitmask of callin CPUs */
-static cpumask_t cpu_callout_map;      /* Bitmask of callout CPUs */
-cpumask_t cpu_boot_map;                        /* Bitmask of boot APs */
-unsigned long start_stack[NR_CPUS - 1];
-
-/*
- * Per CPU parameters
- */
-struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned;
-
-static int cpucount;                   /* The count of boot CPUs */
-static cpumask_t smp_commenced_mask;
-cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
-
-/*
- * Function Prototypes
- */
-static int do_boot_cpu(int);
-static void smp_show_cpu_info(int cpu_id);
-static void smp_callin(void);
-static void smp_online(void);
-static void smp_store_cpu_info(int);
-static void smp_cpu_init(void);
-static void smp_tune_scheduling(void);
-static void send_IPI_mask(const cpumask_t *cpumask, int irq);
-static void init_ipi(void);
-
-/*
- * IPI Initialization interrupt definitions
- */
-static void mn10300_ipi_disable(unsigned int irq);
-static void mn10300_ipi_enable(unsigned int irq);
-static void mn10300_ipi_chip_disable(struct irq_data *d);
-static void mn10300_ipi_chip_enable(struct irq_data *d);
-static void mn10300_ipi_ack(struct irq_data *d);
-static void mn10300_ipi_nop(struct irq_data *d);
-
-static struct irq_chip mn10300_ipi_type = {
-       .name           = "cpu_ipi",
-       .irq_disable    = mn10300_ipi_chip_disable,
-       .irq_enable     = mn10300_ipi_chip_enable,
-       .irq_ack        = mn10300_ipi_ack,
-       .irq_eoi        = mn10300_ipi_nop
-};
-
-static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id);
-static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id);
-
-static struct irqaction reschedule_ipi = {
-       .handler        = smp_reschedule_interrupt,
-       .flags          = IRQF_NOBALANCING,
-       .name           = "smp reschedule IPI"
-};
-static struct irqaction call_function_ipi = {
-       .handler        = smp_call_function_interrupt,
-       .flags          = IRQF_NOBALANCING,
-       .name           = "smp call function IPI"
-};
-
-#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id);
-static struct irqaction local_timer_ipi = {
-       .handler        = smp_ipi_timer_interrupt,
-       .flags          = IRQF_NOBALANCING,
-       .name           = "smp local timer IPI"
-};
-#endif
-
-/**
- * init_ipi - Initialise the IPI mechanism
- */
-static void init_ipi(void)
-{
-       unsigned long flags;
-       u16 tmp16;
-
-       /* set up the reschedule IPI */
-       irq_set_chip_and_handler(RESCHEDULE_IPI, &mn10300_ipi_type,
-                                handle_percpu_irq);
-       setup_irq(RESCHEDULE_IPI, &reschedule_ipi);
-       set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV);
-       mn10300_ipi_enable(RESCHEDULE_IPI);
-
-       /* set up the call function IPI */
-       irq_set_chip_and_handler(CALL_FUNC_SINGLE_IPI, &mn10300_ipi_type,
-                                handle_percpu_irq);
-       setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi);
-       set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV);
-       mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI);
-
-       /* set up the local timer IPI */
-#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \
-    defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-       irq_set_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type,
-                                handle_percpu_irq);
-       setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi);
-       set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV);
-       mn10300_ipi_enable(LOCAL_TIMER_IPI);
-#endif
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-       /* set up the cache flush IPI */
-       irq_set_chip(FLUSH_CACHE_IPI, &mn10300_ipi_type);
-       flags = arch_local_cli_save();
-       __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV),
-                       mn10300_low_ipi_handler);
-       GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT;
-       mn10300_ipi_enable(FLUSH_CACHE_IPI);
-       arch_local_irq_restore(flags);
-#endif
-
-       /* set up the NMI call function IPI */
-       irq_set_chip(CALL_FUNCTION_NMI_IPI, &mn10300_ipi_type);
-       flags = arch_local_cli_save();
-       GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
-       tmp16 = GxICR(CALL_FUNCTION_NMI_IPI);
-       arch_local_irq_restore(flags);
-
-       /* set up the SMP boot IPI */
-       flags = arch_local_cli_save();
-       __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV),
-                       mn10300_low_ipi_handler);
-       arch_local_irq_restore(flags);
-
-#ifdef CONFIG_KERNEL_DEBUGGER
-       irq_set_chip(DEBUGGER_NMI_IPI, &mn10300_ipi_type);
-#endif
-}
-
-/**
- * mn10300_ipi_shutdown - Shut down handling of an IPI
- * @irq: The IPI to be shut down.
- */
-static void mn10300_ipi_shutdown(unsigned int irq)
-{
-       unsigned long flags;
-       u16 tmp;
-
-       flags = arch_local_cli_save();
-
-       tmp = GxICR(irq);
-       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
-       tmp = GxICR(irq);
-
-       arch_local_irq_restore(flags);
-}
-
-/**
- * mn10300_ipi_enable - Enable an IPI
- * @irq: The IPI to be enabled.
- */
-static void mn10300_ipi_enable(unsigned int irq)
-{
-       unsigned long flags;
-       u16 tmp;
-
-       flags = arch_local_cli_save();
-
-       tmp = GxICR(irq);
-       GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
-       tmp = GxICR(irq);
-
-       arch_local_irq_restore(flags);
-}
-
-static void mn10300_ipi_chip_enable(struct irq_data *d)
-{
-       mn10300_ipi_enable(d->irq);
-}
-
-/**
- * mn10300_ipi_disable - Disable an IPI
- * @irq: The IPI to be disabled.
- */
-static void mn10300_ipi_disable(unsigned int irq)
-{
-       unsigned long flags;
-       u16 tmp;
-
-       flags = arch_local_cli_save();
-
-       tmp = GxICR(irq);
-       GxICR(irq) = tmp & GxICR_LEVEL;
-       tmp = GxICR(irq);
-
-       arch_local_irq_restore(flags);
-}
-
-static void mn10300_ipi_chip_disable(struct irq_data *d)
-{
-       mn10300_ipi_disable(d->irq);
-}
-
-
-/**
- * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC
- * @irq: The IPI to be acknowledged.
- *
- * Clear the interrupt detection flag for the IPI on the appropriate interrupt
- * channel in the PIC.
- */
-static void mn10300_ipi_ack(struct irq_data *d)
-{
-       unsigned int irq = d->irq;
-       unsigned long flags;
-       u16 tmp;
-
-       flags = arch_local_cli_save();
-       GxICR_u8(irq) = GxICR_DETECT;
-       tmp = GxICR(irq);
-       arch_local_irq_restore(flags);
-}
-
-/**
- * mn10300_ipi_nop - Dummy IPI action
- * @irq: The IPI to be acted upon.
- */
-static void mn10300_ipi_nop(struct irq_data *d)
-{
-}
-
-/**
- * send_IPI_mask - Send IPIs to all CPUs in list
- * @cpumask: The list of CPUs to target.
- * @irq: The IPI request to be sent.
- *
- * Send the specified IPI to all the CPUs in the list, not waiting for them to
- * finish before returning.  The caller is responsible for synchronisation if
- * that is needed.
- */
-static void send_IPI_mask(const cpumask_t *cpumask, int irq)
-{
-       int i;
-       u16 tmp;
-
-       for (i = 0; i < NR_CPUS; i++) {
-               if (cpumask_test_cpu(i, cpumask)) {
-                       /* send IPI */
-                       tmp = CROSS_GxICR(irq, i);
-                       CROSS_GxICR(irq, i) =
-                               tmp | GxICR_REQUEST | GxICR_DETECT;
-                       tmp = CROSS_GxICR(irq, i); /* flush write buffer */
-               }
-       }
-}
-
-/**
- * send_IPI_self - Send an IPI to this CPU.
- * @irq: The IPI request to be sent.
- *
- * Send the specified IPI to the current CPU.
- */
-void send_IPI_self(int irq)
-{
-       send_IPI_mask(cpumask_of(smp_processor_id()), irq);
-}
-
-/**
- * send_IPI_allbutself - Send IPIs to all the other CPUs.
- * @irq: The IPI request to be sent.
- *
- * Send the specified IPI to all CPUs in the system barring the current one,
- * not waiting for them to finish before returning.  The caller is responsible
- * for synchronisation if that is needed.
- */
-void send_IPI_allbutself(int irq)
-{
-       cpumask_t cpumask;
-
-       cpumask_copy(&cpumask, cpu_online_mask);
-       cpumask_clear_cpu(smp_processor_id(), &cpumask);
-       send_IPI_mask(&cpumask, irq);
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-       BUG();
-       /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
-       send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI);
-}
-
-/**
- * smp_send_reschedule - Send reschedule IPI to a CPU
- * @cpu: The CPU to target.
- */
-void smp_send_reschedule(int cpu)
-{
-       send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI);
-}
-
-/**
- * smp_nmi_call_function - Send a call function NMI IPI to all CPUs
- * @func: The function to ask to be run.
- * @info: The context data to pass to that function.
- * @wait: If true, wait (atomically) until function is run on all CPUs.
- *
- * Send a non-maskable request to all CPUs in the system, requesting them to
- * run the specified function with the given context data, and, potentially, to
- * wait for completion of that function on all CPUs.
- *
- * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the
- * timeout.
- */
-int smp_nmi_call_function(smp_call_func_t func, void *info, int wait)
-{
-       struct nmi_call_data_struct data;
-       unsigned long flags;
-       unsigned int cnt;
-       int cpus, ret = 0;
-
-       cpus = num_online_cpus() - 1;
-       if (cpus < 1)
-               return 0;
-
-       data.func = func;
-       data.info = info;
-       cpumask_copy(&data.started, cpu_online_mask);
-       cpumask_clear_cpu(smp_processor_id(), &data.started);
-       data.wait = wait;
-       if (wait)
-               data.finished = data.started;
-
-       spin_lock_irqsave(&smp_nmi_call_lock, flags);
-       nmi_call_data = &data;
-       smp_mb();
-
-       /* Send a message to all other CPUs and wait for them to respond */
-       send_IPI_allbutself(CALL_FUNCTION_NMI_IPI);
-
-       /* Wait for response */
-       if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) {
-               for (cnt = 0;
-                    cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT &&
-                            !cpumask_empty(&data.started);
-                    cnt++)
-                       mdelay(1);
-
-               if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) {
-                       for (cnt = 0;
-                            cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT &&
-                                    !cpumask_empty(&data.finished);
-                            cnt++)
-                               mdelay(1);
-               }
-
-               if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT)
-                       ret = -ETIMEDOUT;
-
-       } else {
-               /* If timeout value is zero, wait until cpumask has been
-                * cleared */
-               while (!cpumask_empty(&data.started))
-                       barrier();
-               if (wait)
-                       while (!cpumask_empty(&data.finished))
-                               barrier();
-       }
-
-       spin_unlock_irqrestore(&smp_nmi_call_lock, flags);
-       return ret;
-}
-
-/**
- * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI
- *
- * Send a non-maskable request to all other CPUs in the system, instructing
- * them to jump into the debugger.  The caller is responsible for checking that
- * the other CPUs responded to the instruction.
- *
- * The caller should make sure that this CPU's debugger IPI is disabled.
- */
-void smp_jump_to_debugger(void)
-{
-       if (num_online_cpus() > 1)
-               /* Send a message to all other CPUs */
-               send_IPI_allbutself(DEBUGGER_NMI_IPI);
-}
-
-/**
- * stop_this_cpu - Callback to stop a CPU.
- * @unused: Callback context (ignored).
- */
-void stop_this_cpu(void *unused)
-{
-       static volatile int stopflag;
-       unsigned long flags;
-
-#ifdef CONFIG_GDBSTUB
-       /* In case of single stepping smp_send_stop by other CPU,
-        * clear procindebug to avoid deadlock.
-        */
-       atomic_set(&procindebug[smp_processor_id()], 0);
-#endif /* CONFIG_GDBSTUB */
-
-       flags = arch_local_cli_save();
-       set_cpu_online(smp_processor_id(), false);
-
-       while (!stopflag)
-               cpu_relax();
-
-       set_cpu_online(smp_processor_id(), true);
-       arch_local_irq_restore(flags);
-}
-
-/**
- * smp_send_stop - Send a stop request to all CPUs.
- */
-void smp_send_stop(void)
-{
-       smp_nmi_call_function(stop_this_cpu, NULL, 0);
-}
-
-/**
- * smp_reschedule_interrupt - Reschedule IPI handler
- * @irq: The interrupt number.
- * @dev_id: The device ID.
- *
- * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
- */
-static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id)
-{
-       scheduler_ipi();
-       return IRQ_HANDLED;
-}
-
-/**
- * smp_call_function_interrupt - Call function IPI handler
- * @irq: The interrupt number.
- * @dev_id: The device ID.
- *
- * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
- */
-static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id)
-{
-       /* generic_smp_call_function_interrupt(); */
-       generic_smp_call_function_single_interrupt();
-       return IRQ_HANDLED;
-}
-
-/**
- * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler
- */
-void smp_nmi_call_function_interrupt(void)
-{
-       smp_call_func_t func = nmi_call_data->func;
-       void *info = nmi_call_data->info;
-       int wait = nmi_call_data->wait;
-
-       /* Notify the initiating CPU that I've grabbed the data and am about to
-        * execute the function
-        */
-       smp_mb();
-       cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started);
-       (*func)(info);
-
-       if (wait) {
-               smp_mb();
-               cpumask_clear_cpu(smp_processor_id(),
-                                 &nmi_call_data->finished);
-       }
-}
-
-#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \
-    defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-/**
- * smp_ipi_timer_interrupt - Local timer IPI handler
- * @irq: The interrupt number.
- * @dev_id: The device ID.
- *
- * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
- */
-static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id)
-{
-       return local_timer_interrupt();
-}
-#endif
-
-void __init smp_init_cpus(void)
-{
-       int i;
-       for (i = 0; i < NR_CPUS; i++) {
-               set_cpu_possible(i, true);
-               set_cpu_present(i, true);
-       }
-}
-
-/**
- * smp_cpu_init - Initialise AP in start_secondary.
- *
- * For this Application Processor, set up init_mm, initialise FPU and set
- * interrupt level 0-6 setting.
- */
-static void __init smp_cpu_init(void)
-{
-       unsigned long flags;
-       int cpu_id = smp_processor_id();
-       u16 tmp16;
-
-       if (test_and_set_bit(cpu_id, &cpu_initialized)) {
-               printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id);
-               for (;;)
-                       local_irq_enable();
-       }
-       printk(KERN_INFO "Initializing CPU#%d\n", cpu_id);
-
-       mmgrab(&init_mm);
-       current->active_mm = &init_mm;
-       BUG_ON(current->mm);
-
-       enter_lazy_tlb(&init_mm, current);
-
-       /* Force FPU initialization */
-       clear_using_fpu(current);
-
-       GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT;
-       mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI);
-
-       GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT;
-       mn10300_ipi_enable(LOCAL_TIMER_IPI);
-
-       GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT;
-       mn10300_ipi_enable(RESCHEDULE_IPI);
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-       GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT;
-       mn10300_ipi_enable(FLUSH_CACHE_IPI);
-#endif
-
-       mn10300_ipi_shutdown(SMP_BOOT_IRQ);
-
-       /* Set up the non-maskable call function IPI */
-       flags = arch_local_cli_save();
-       GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
-       tmp16 = GxICR(CALL_FUNCTION_NMI_IPI);
-       arch_local_irq_restore(flags);
-}
-
-/**
- * smp_prepare_cpu_init - Initialise CPU in startup_secondary
- *
- * Set interrupt level 0-6 setting and init ICR of the kernel debugger.
- */
-void smp_prepare_cpu_init(void)
-{
-       int loop;
-
-       /* Set the interrupt vector registers */
-       IVAR0 = EXCEP_IRQ_LEVEL0;
-       IVAR1 = EXCEP_IRQ_LEVEL1;
-       IVAR2 = EXCEP_IRQ_LEVEL2;
-       IVAR3 = EXCEP_IRQ_LEVEL3;
-       IVAR4 = EXCEP_IRQ_LEVEL4;
-       IVAR5 = EXCEP_IRQ_LEVEL5;
-       IVAR6 = EXCEP_IRQ_LEVEL6;
-
-       /* Disable all interrupts and set to priority 6 (lowest) */
-       for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
-               GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
-
-#ifdef CONFIG_KERNEL_DEBUGGER
-       /* initialise the kernel debugger interrupt */
-       do {
-               unsigned long flags;
-               u16 tmp16;
-
-               flags = arch_local_cli_save();
-               GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
-               tmp16 = GxICR(DEBUGGER_NMI_IPI);
-               arch_local_irq_restore(flags);
-       } while (0);
-#endif
-}
-
-/**
- * start_secondary - Activate a secondary CPU (AP)
- * @unused: Thread parameter (ignored).
- */
-int __init start_secondary(void *unused)
-{
-       smp_cpu_init();
-       smp_callin();
-       while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask))
-               cpu_relax();
-
-       local_flush_tlb();
-       preempt_disable();
-       smp_online();
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-       init_clockevents();
-#endif
-       cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-       return 0;
-}
-
-/**
- * smp_prepare_cpus - Boot up secondary CPUs (APs)
- * @max_cpus: Maximum number of CPUs to boot.
- *
- * Call do_boot_cpu, and boot up APs.
- */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-       int phy_id;
-
-       /* Setup boot CPU information */
-       smp_store_cpu_info(0);
-       smp_tune_scheduling();
-
-       init_ipi();
-
-       /* If SMP should be disabled, then finish */
-       if (max_cpus == 0) {
-               printk(KERN_INFO "SMP mode deactivated.\n");
-               goto smp_done;
-       }
-
-       /* Boot secondary CPUs (for which phy_id > 0) */
-       for (phy_id = 0; phy_id < NR_CPUS; phy_id++) {
-               /* Don't boot primary CPU */
-               if (max_cpus <= cpucount + 1)
-                       continue;
-               if (phy_id != 0)
-                       do_boot_cpu(phy_id);
-               set_cpu_possible(phy_id, true);
-               smp_show_cpu_info(phy_id);
-       }
-
-smp_done:
-       Dprintk("Boot done.\n");
-}
-
-/**
- * smp_store_cpu_info - Save a CPU's information
- * @cpu: The CPU to save for.
- *
- * Save boot_cpu_data and jiffy for the specified CPU.
- */
-static void __init smp_store_cpu_info(int cpu)
-{
-       struct mn10300_cpuinfo *ci = &cpu_data[cpu];
-
-       *ci = boot_cpu_data;
-       ci->loops_per_jiffy = loops_per_jiffy;
-       ci->type = CPUREV;
-}
-
-/**
- * smp_tune_scheduling - Set time slice value
- *
- * Nothing to do here.
- */
-static void __init smp_tune_scheduling(void)
-{
-}
-
-/**
- * do_boot_cpu: Boot up one CPU
- * @phy_id: Physical ID of CPU to boot.
- *
- * Send an IPI to a secondary CPU to boot it.  Returns 0 on success, 1
- * otherwise.
- */
-static int __init do_boot_cpu(int phy_id)
-{
-       struct task_struct *idle;
-       unsigned long send_status, callin_status;
-       int timeout, cpu_id;
-
-       send_status = GxICR_REQUEST;
-       callin_status = 0;
-       timeout = 0;
-       cpu_id = phy_id;
-
-       cpucount++;
-
-       /* Create idle thread for this CPU */
-       idle = fork_idle(cpu_id);
-       if (IS_ERR(idle))
-               panic("Failed fork for CPU#%d.", cpu_id);
-
-       idle->thread.pc = (unsigned long)start_secondary;
-
-       printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id);
-       start_stack[cpu_id - 1] = idle->thread.sp;
-
-       task_thread_info(idle)->cpu = cpu_id;
-
-       /* Send boot IPI to AP */
-       send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ);
-
-       Dprintk("Waiting for send to finish...\n");
-
-       /* Wait for AP's IPI receive in 100[ms] */
-       do {
-               udelay(1000);
-               send_status =
-                       CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST;
-       } while (send_status == GxICR_REQUEST && timeout++ < 100);
-
-       Dprintk("Waiting for cpu_callin_map.\n");
-
-       if (send_status == 0) {
-               /* Allow AP to start initializing */
-               cpumask_set_cpu(cpu_id, &cpu_callout_map);
-
-               /* Wait for setting cpu_callin_map */
-               timeout = 0;
-               do {
-                       udelay(1000);
-                       callin_status = cpumask_test_cpu(cpu_id,
-                                                        &cpu_callin_map);
-               } while (callin_status == 0 && timeout++ < 5000);
-
-               if (callin_status == 0)
-                       Dprintk("Not responding.\n");
-       } else {
-               printk(KERN_WARNING "IPI not delivered.\n");
-       }
-
-       if (send_status == GxICR_REQUEST || callin_status == 0) {
-               cpumask_clear_cpu(cpu_id, &cpu_callout_map);
-               cpumask_clear_cpu(cpu_id, &cpu_callin_map);
-               cpumask_clear_cpu(cpu_id, &cpu_initialized);
-               cpucount--;
-               return 1;
-       }
-       return 0;
-}
-
-/**
- * smp_show_cpu_info - Show SMP CPU information
- * @cpu: The CPU of interest.
- */
-static void __init smp_show_cpu_info(int cpu)
-{
-       struct mn10300_cpuinfo *ci = &cpu_data[cpu];
-
-       printk(KERN_INFO
-              "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n",
-              cpu,
-              MN10300_IOCLK / 1000000,
-              (MN10300_IOCLK / 10000) % 100,
-              ci->loops_per_jiffy / (500000 / HZ),
-              (ci->loops_per_jiffy / (5000 / HZ)) % 100);
-}
-
-/**
- * smp_callin - Set cpu_callin_map of the current CPU ID
- */
-static void __init smp_callin(void)
-{
-       unsigned long timeout;
-       int cpu;
-
-       cpu = smp_processor_id();
-       timeout = jiffies + (2 * HZ);
-
-       if (cpumask_test_cpu(cpu, &cpu_callin_map)) {
-               printk(KERN_ERR "CPU#%d already present.\n", cpu);
-               BUG();
-       }
-       Dprintk("CPU#%d waiting for CALLOUT\n", cpu);
-
-       /* Wait for AP startup 2s total */
-       while (time_before(jiffies, timeout)) {
-               if (cpumask_test_cpu(cpu, &cpu_callout_map))
-                       break;
-               cpu_relax();
-       }
-
-       if (!time_before(jiffies, timeout)) {
-               printk(KERN_ERR
-                      "BUG: CPU#%d started up but did not get a callout!\n",
-                      cpu);
-               BUG();
-       }
-
-#ifdef CONFIG_CALIBRATE_DELAY
-       calibrate_delay();              /* Get our bogomips */
-#endif
-
-       /* Save our processor parameters */
-       smp_store_cpu_info(cpu);
-
-       /* Allow the boot processor to continue */
-       cpumask_set_cpu(cpu, &cpu_callin_map);
-}
-
-/**
- * smp_online - Set cpu_online_mask
- */
-static void __init smp_online(void)
-{
-       int cpu;
-
-       cpu = smp_processor_id();
-
-       notify_cpu_starting(cpu);
-
-       set_cpu_online(cpu, true);
-
-       local_irq_enable();
-}
-
-/**
- * smp_cpus_done -
- * @max_cpus: Maximum CPU count.
- *
- * Do nothing.
- */
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-}
-
-/*
- * smp_prepare_boot_cpu - Set up stuff for the boot processor.
- *
- * Set up the cpu_online_mask, cpu_callout_map and cpu_callin_map of the boot
- * processor (CPU 0).
- */
-void smp_prepare_boot_cpu(void)
-{
-       cpumask_set_cpu(0, &cpu_callout_map);
-       cpumask_set_cpu(0, &cpu_callin_map);
-       current_thread_info()->cpu = 0;
-}
-
-/*
- * initialize_secondary - Initialise a secondary CPU (Application Processor).
- *
- * Set SP register and jump to thread's PC address.
- */
-void initialize_secondary(void)
-{
-       asm volatile (
-               "mov    %0,sp   \n"
-               "jmp    (%1)    \n"
-               :
-               : "a"(current->thread.sp), "a"(current->thread.pc));
-}
-
-/**
- * __cpu_up - Set smp_commenced_mask for the nominated CPU
- * @cpu: The target CPU.
- */
-int __cpu_up(unsigned int cpu, struct task_struct *tidle)
-{
-       int timeout;
-
-#ifdef CONFIG_HOTPLUG_CPU
-       if (sleep_mode[cpu])
-               run_wakeup_cpu(cpu);
-#endif /* CONFIG_HOTPLUG_CPU */
-
-       cpumask_set_cpu(cpu, &smp_commenced_mask);
-
-       /* Wait 5s total for a response */
-       for (timeout = 0 ; timeout < 5000 ; timeout++) {
-               if (cpu_online(cpu))
-                       break;
-               udelay(1000);
-       }
-
-       BUG_ON(!cpu_online(cpu));
-       return 0;
-}
-
-/**
- * setup_profiling_timer - Set up the profiling timer
- * @multiplier - The frequency multiplier to use
- *
- * The frequency of the profiling timer can be changed by writing a multiplier
- * value into /proc/profile.
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-       return -EINVAL;
-}
-
-/*
- * CPU hotplug routines
- */
-#ifdef CONFIG_HOTPLUG_CPU
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-static int __init topology_init(void)
-{
-       int cpu, ret;
-
-       for_each_cpu(cpu) {
-               ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
-               if (ret)
-                       printk(KERN_WARNING
-                              "topology_init: register_cpu %d failed (%d)\n",
-                              cpu, ret);
-       }
-       return 0;
-}
-
-subsys_initcall(topology_init);
-
-int __cpu_disable(void)
-{
-       int cpu = smp_processor_id();
-       if (cpu == 0)
-               return -EBUSY;
-
-       migrate_irqs();
-       cpumask_clear_cpu(cpu, &mm_cpumask(current->active_mm));
-       return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-       run_sleep_cpu(cpu);
-}
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-static inline void hotplug_cpu_disable_cache(void)
-{
-       int tmp;
-       asm volatile(
-               "       movhu   (%1),%0 \n"
-               "       and     %2,%0   \n"
-               "       movhu   %0,(%1) \n"
-               "1:     movhu   (%1),%0 \n"
-               "       btst    %3,%0   \n"
-               "       bne     1b      \n"
-               : "=&r"(tmp)
-               : "a"(&CHCTR),
-                 "i"(~(CHCTR_ICEN | CHCTR_DCEN)),
-                 "i"(CHCTR_ICBUSY | CHCTR_DCBUSY)
-               : "memory", "cc");
-}
-
-static inline void hotplug_cpu_enable_cache(void)
-{
-       int tmp;
-       asm volatile(
-               "movhu  (%1),%0 \n"
-               "or     %2,%0   \n"
-               "movhu  %0,(%1) \n"
-               : "=&r"(tmp)
-               : "a"(&CHCTR),
-                 "i"(CHCTR_ICEN | CHCTR_DCEN)
-               : "memory", "cc");
-}
-
-static inline void hotplug_cpu_invalidate_cache(void)
-{
-       int tmp;
-       asm volatile (
-               "movhu  (%1),%0 \n"
-               "or     %2,%0   \n"
-               "movhu  %0,(%1) \n"
-               : "=&r"(tmp)
-               : "a"(&CHCTR),
-                 "i"(CHCTR_ICINV | CHCTR_DCINV)
-               : "cc");
-}
-
-#else /* CONFIG_MN10300_CACHE_ENABLED */
-#define hotplug_cpu_disable_cache()    do {} while (0)
-#define hotplug_cpu_enable_cache()     do {} while (0)
-#define hotplug_cpu_invalidate_cache() do {} while (0)
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
-
-/**
- * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug
- * @cpumask: List of target CPUs.
- * @func: The function to call on those CPUs.
- * @info: The context data for the function to be called.
- * @wait: Whether to wait for the calls to complete.
- *
- * Non-maskably call a function on another CPU for hotplug purposes.
- *
- * This function must be called with maskable interrupts disabled.
- */
-static int hotplug_cpu_nmi_call_function(cpumask_t cpumask,
-                                        smp_call_func_t func, void *info,
-                                        int wait)
-{
-       /*
-        * The address and the size of nmi_call_func_mask_data
-        * need to be aligned on L1_CACHE_BYTES.
-        */
-       static struct nmi_call_data_struct nmi_call_func_mask_data
-               __cacheline_aligned;
-       unsigned long start, end;
-
-       start = (unsigned long)&nmi_call_func_mask_data;
-       end = start + sizeof(struct nmi_call_data_struct);
-
-       nmi_call_func_mask_data.func = func;
-       nmi_call_func_mask_data.info = info;
-       nmi_call_func_mask_data.started = cpumask;
-       nmi_call_func_mask_data.wait = wait;
-       if (wait)
-               nmi_call_func_mask_data.finished = cpumask;
-
-       spin_lock(&smp_nmi_call_lock);
-       nmi_call_data = &nmi_call_func_mask_data;
-       mn10300_local_dcache_flush_range(start, end);
-       smp_wmb();
-
-       send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI);
-
-       do {
-               mn10300_local_dcache_inv_range(start, end);
-               barrier();
-       } while (!cpumask_empty(&nmi_call_func_mask_data.started));
-
-       if (wait) {
-               do {
-                       mn10300_local_dcache_inv_range(start, end);
-                       barrier();
-               } while (!cpumask_empty(&nmi_call_func_mask_data.finished));
-       }
-
-       spin_unlock(&smp_nmi_call_lock);
-       return 0;
-}
-
-static void restart_wakeup_cpu(void)
-{
-       unsigned int cpu = smp_processor_id();
-
-       cpumask_set_cpu(cpu, &cpu_callin_map);
-       local_flush_tlb();
-       set_cpu_online(cpu, true);
-       smp_wmb();
-}
-
-static void prepare_sleep_cpu(void *unused)
-{
-       sleep_mode[smp_processor_id()] = 1;
-       smp_mb();
-       mn10300_local_dcache_flush_inv();
-       hotplug_cpu_disable_cache();
-       hotplug_cpu_invalidate_cache();
-}
-
-/* when this function called, IE=0, NMID=0. */
-static void sleep_cpu(void *unused)
-{
-       unsigned int cpu_id = smp_processor_id();
-       /*
-        * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested,
-        * before this cpu goes in SLEEP mode.
-        */
-       do {
-               smp_mb();
-               __sleep_cpu();
-       } while (sleep_mode[cpu_id]);
-       restart_wakeup_cpu();
-}
-
-static void run_sleep_cpu(unsigned int cpu)
-{
-       unsigned long flags;
-       cpumask_t cpumask;
-
-       cpumask_copy(&cpumask, &cpumask_of(cpu));
-       flags = arch_local_cli_save();
-       hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1);
-       hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0);
-       udelay(1);              /* delay for the cpu to sleep. */
-       arch_local_irq_restore(flags);
-}
-
-static void wakeup_cpu(void)
-{
-       hotplug_cpu_invalidate_cache();
-       hotplug_cpu_enable_cache();
-       smp_mb();
-       sleep_mode[smp_processor_id()] = 0;
-}
-
-static void run_wakeup_cpu(unsigned int cpu)
-{
-       unsigned long flags;
-
-       flags = arch_local_cli_save();
-#if NR_CPUS == 2
-       mn10300_local_dcache_flush_inv();
-#else
-       /*
-        * Before waking up the cpu,
-        * all online cpus should stop and flush D-Cache for global data.
-        */
-#error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y.
-#endif
-       hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1);
-       arch_local_irq_restore(flags);
-}
-
-#endif /* CONFIG_HOTPLUG_CPU */