m68k: merge m68k and m68knommu arch directories

[sfrench/cifs-2.6.git] / arch / m68knommu / platform / 5272 / config.c

diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
deleted file mode 100644 (file)
index 65bb582..0000000
--- a/arch/m68knommu/platform/5272/config.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/***************************************************************************/
-
-/*
- *     linux/arch/m68knommu/platform/5272/config.c
- *
- *     Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *     Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/phy.h>
-#include <linux/phy_fixed.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-/*
- *     Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-static struct mcf_platform_uart m5272_uart_platform[] = {
-       {
-               .mapbase        = MCF_MBAR + MCFUART_BASE1,
-               .irq            = MCF_IRQ_UART1,
-       },
-       {
-               .mapbase        = MCF_MBAR + MCFUART_BASE2,
-               .irq            = MCF_IRQ_UART2,
-       },
-       { },
-};
-
-static struct platform_device m5272_uart = {
-       .name                   = "mcfuart",
-       .id                     = 0,
-       .dev.platform_data      = m5272_uart_platform,
-};
-
-static struct resource m5272_fec_resources[] = {
-       {
-               .start          = MCF_MBAR + 0x840,
-               .end            = MCF_MBAR + 0x840 + 0x1cf,
-               .flags          = IORESOURCE_MEM,
-       },
-       {
-               .start          = MCF_IRQ_ERX,
-               .end            = MCF_IRQ_ERX,
-               .flags          = IORESOURCE_IRQ,
-       },
-       {
-               .start          = MCF_IRQ_ETX,
-               .end            = MCF_IRQ_ETX,
-               .flags          = IORESOURCE_IRQ,
-       },
-       {
-               .start          = MCF_IRQ_ENTC,
-               .end            = MCF_IRQ_ENTC,
-               .flags          = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device m5272_fec = {
-       .name                   = "fec",
-       .id                     = 0,
-       .num_resources          = ARRAY_SIZE(m5272_fec_resources),
-       .resource               = m5272_fec_resources,
-};
-
-static struct platform_device *m5272_devices[] __initdata = {
-       &m5272_uart,
-       &m5272_fec,
-};
-
-/***************************************************************************/
-
-static void __init m5272_uart_init_line(int line, int irq)
-{
-       u32 v;
-
-       if ((line >= 0) && (line < 2)) {
-               /* Enable the output lines for the serial ports */
-               v = readl(MCF_MBAR + MCFSIM_PBCNT);
-               v = (v & ~0x000000ff) | 0x00000055;
-               writel(v, MCF_MBAR + MCFSIM_PBCNT);
-
-               v = readl(MCF_MBAR + MCFSIM_PDCNT);
-               v = (v & ~0x000003fc) | 0x000002a8;
-               writel(v, MCF_MBAR + MCFSIM_PDCNT);
-       }
-}
-
-static void __init m5272_uarts_init(void)
-{
-       const int nrlines = ARRAY_SIZE(m5272_uart_platform);
-       int line;
-
-       for (line = 0; (line < nrlines); line++)
-               m5272_uart_init_line(line, m5272_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void m5272_cpu_reset(void)
-{
-       local_irq_disable();
-       /* Set watchdog to reset, and enabled */
-       __raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
-       __raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
-       __raw_writew(0, MCF_MBAR + MCFSIM_WCR);
-       for (;;)
-               /* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined (CONFIG_MOD5272)
-       volatile unsigned char  *pivrp;
-
-       /* Set base of device vectors to be 64 */
-       pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
-       *pivrp = 0x40;
-#endif
-
-#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
-       /* Copy command line from FLASH to local buffer... */
-       memcpy(commandp, (char *) 0xf0004000, size);
-       commandp[size-1] = 0;
-#elif defined(CONFIG_CANCam)
-       /* Copy command line from FLASH to local buffer... */
-       memcpy(commandp, (char *) 0xf0010000, size);
-       commandp[size-1] = 0;
-#endif
-
-       mach_reset = m5272_cpu_reset;
-}
-
-/***************************************************************************/
-
-/*
- * Some 5272 based boards have the FEC ethernet diectly connected to
- * an ethernet switch. In this case we need to use the fixed phy type,
- * and we need to declare it early in boot.
- */
-static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
-       .link   = 1,
-       .speed  = 100,
-       .duplex = 0,
-};
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-       m5272_uarts_init();
-       fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
-       platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
-       return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/