+++ /dev/null
-# .gdbinit file
-# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:200:50:50
-define clock_init
- set *(unsigned long *)0x00ef4008 = 0x00000000
- set *(unsigned long *)0x00ef4004 = 0
- shell sleep 0.1
- # NOTE: Please change the master clock source from PLL-clock to Xin-clock
- # and switch off PLL, before resetting the clock gear ratio.
-
- set *(unsigned long *)0x00ef4024 = 2
- set *(unsigned long *)0x00ef4020 = 2
- set *(unsigned long *)0x00ef4010 = 0
- set *(unsigned long *)0x00ef4014 = 0
- set *(unsigned long *)0x00ef4004 = 3
- shell sleep 0.1
- set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
- # SDIR0
- set *(unsigned long *)0x00ef6008 = 0x00000182
- # SDIR1
- set *(unsigned long *)0x00ef600c = 0x00000001
- # Initialize wait
- shell sleep 0.1
- # Ch0-MOD
- set *(unsigned long *)0x00ef602c = 0x00000020
- # Ch0-TR
- set *(unsigned long *)0x00ef6028 = 0x00041302
- # Ch0-ADR (size:16MB)
- set *(unsigned long *)0x00ef6020 = 0x08000002
- # AutoRef On
- set *(unsigned long *)0x00ef6004 = 0x00010517
- # Access enable
- set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
- SDRAM controller initialization
- 0x08000000 - 0x08ffffff (16MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
- set $sfrbase = 0xa0ef0000
-# too fast
-# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
- CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
- set $evb=0x88000000
- set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
- set $evb=0
- set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
- set $i = 0
- set $addr = $arg0
- set $nr_entries = $arg1
- use_mon_code
- while ($i < $nr_entries)
- set $tlb_tag = *(unsigned long*)$addr
- set $tlb_data = *(unsigned long*)($addr + 4)
- printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
- set $i = $i + 1
- set $addr = $addr + 8
- end
- use_debug_dma
-end
-define itlb
- set $itlb=0xfe000000
- show_tlb_entries $itlb 0d32
-end
-define dtlb
- set $dtlb=0xfe000800
- show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
- set $i = 0
- set $addr = $arg0
- set $nr_entries = $arg1
- use_mon_code
- while ($i < $nr_entries)
- set *(unsigned long *)($addr + 0x4) = 0
- set $i = $i + 1
- set $addr = $addr + 8
- end
- use_debug_dma
-end
-define tlb_init
- set $itlb=0xfe000000
- init_tlb_entries $itlb 0d32
- set $dtlb=0xfe000800
- init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
- set $current = $spi & 0xffffe000
- printf "$current=0x%08lX\n",$current
- print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
- set = $arg0 & 0xffffe000
- printf "$task=0x%08lX\n",$task
- print *(struct task_struct *)$task
-end
-document show_task
- Show user assigned task structure
- arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
- printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3
- printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7
- printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11
- printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp
- printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
- printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
- printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
- use_mon_code
- set *(unsigned int)0xfffffffc=0x60
- shell sleep 0.1
- clock_init
- shell sleep 0.1
- # SDRAM: 16MB
- set *(unsigned long *)0x00ef6020 = 0x08000002
- cfc_init
- # USB
- set *(unsigned short *)0xb0301000 = 0x100
-
- set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
- use_debug_dma
- load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
- set $param = (void*)0x08001000
- # INITRD_START
-# set *(unsigned long *)($param + 0x0010) = 0x08300000
- # INITRD_SIZE
-# set *(unsigned long *)($param + 0x0014) = 0x00000000
- # M32R_CPUCLK
- set *(unsigned long *)($param + 0x0018) = 0d200000000
- # M32R_BUSCLK
- set *(unsigned long *)($param + 0x001c) = 0d50000000
-
- # M32R_TIMER_DIVIDE
- set *(unsigned long *)($param + 0x0020) = 0d128
-
- set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
-end
-
-# Boot
-define boot
- set_kernel_parameters
- set $fp = 0
- set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
- si
- c
-end
-
-# Set breakpoints
-define set_breakpoints
- b *0x08000030
-end
-
-# Restart
-define restart
- sdireset
- sdireset
- set $pc = 0
- b *0x04001000
- b *0x08001000
- b *0x08002000
- si
- c
- tlb_init
- del
- setup
- load_modules
- boot
-end
-
-define si
- stepi
- x/i $pc
- show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
git.samba.org / sfrench / cifs-2.6.git / blobdiff