avr32: remove support for AVR32 architecture

[sfrench/cifs-2.6.git] / arch / avr32 / boards / merisc / flash.c

diff --git a/arch/avr32/boards/merisc/flash.c b/arch/avr32/boards/merisc/flash.c
deleted file mode 100644 (file)
index 8e856fd..0000000
--- a/arch/avr32/boards/merisc/flash.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Merisc board-specific flash initialization
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mach/smc.h>
-
-/* Will be translated to units of 14.3 ns, rounded up */
-static struct smc_timing flash_timing __initdata = {
-       .ncs_read_setup         = 1 * 14,
-       .nrd_setup              = 5 * 14,
-       .ncs_write_setup        = 1 * 14,
-       .nwe_setup              = 2 * 14,
-
-       .ncs_read_pulse         = 12 * 14,
-       .nrd_pulse              = 7 * 14,
-       .ncs_write_pulse        = 8 * 14,
-       .nwe_pulse              = 4 * 14,
-
-       .read_cycle             = 14 * 14,
-       .write_cycle            = 10 * 14,
-};
-
-static struct smc_config flash_config __initdata = {
-       .bus_width      = 2,
-       .nrd_controlled = 1,
-       .nwe_controlled = 1,
-       .byte_write     = 1,
-       .tdf_cycles     = 3,
-};
-
-static struct mtd_partition flash_0_parts[] = {
-       {
-               .name           = "boot",
-               .offset         = 0x00000000,
-               .size           = 0x00060000,
-               .mask_flags     = 0,
-       },
-       {
-               .name           = "kernel",
-               .offset         = 0x00060000,
-               .size           = 0x00200000,
-               .mask_flags     = 0,
-       },
-       {
-               .name           = "root",
-               .offset         = 0x00260000,
-               .size           = MTDPART_SIZ_FULL,
-               .mask_flags     = 0,
-       },
-};
-
-static struct mtd_partition flash_1_parts[] = {
-       {
-               .name           = "2ndflash",
-               .offset         = 0x00000000,
-               .size           = MTDPART_SIZ_FULL,
-               .mask_flags     = 0,
-       },
-};
-
-static struct physmap_flash_data flash_data[] = {
-       {
-               .width          = 2,
-               .nr_parts       = ARRAY_SIZE(flash_0_parts),
-               .parts          = flash_0_parts,
-       },
-       {
-               .width          = 2,
-               .nr_parts       = ARRAY_SIZE(flash_1_parts),
-               .parts          = flash_1_parts,
-       }
-};
-
-static struct resource flash_resource[] = {
-       {
-               .start          = 0x00000000,
-               .end            = 0x03ffffff,
-               .flags          = IORESOURCE_MEM,
-       },
-       {
-               .start          = 0x04000000,
-               .end            = 0x07ffffff,
-               .flags          = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device flash_device[] = {
-       {
-               .name           = "physmap-flash",
-               .id             = 0,
-               .resource       = &flash_resource[0],
-               .num_resources  = 1,
-               .dev            = {
-                       .platform_data  = &flash_data[0],
-               },
-       },
-       {
-               .name           = "physmap-flash",
-               .id             = 1,
-               .resource       = &flash_resource[1],
-               .num_resources  = 1,
-               .dev            = {
-                       .platform_data  = &flash_data[1],
-               },
-       },
-};
-
-static int __init merisc_flash_init(void)
-{
-       int ret;
-       smc_set_timing(&flash_config, &flash_timing);
-
-       ret = smc_set_configuration(0, &flash_config);
-       if (ret < 0) {
-               printk(KERN_ERR "Merisc: failed to set NOR flash timing #0\n");
-               return ret;
-       }
-
-       ret = smc_set_configuration(4, &flash_config);
-       if (ret < 0) {
-               printk(KERN_ERR "Merisc: failed to set NOR flash timing #1\n");
-               return ret;
-       }
-
-       platform_device_register(&flash_device[0]);
-       platform_device_register(&flash_device[1]);
-       return 0;
-}
-device_initcall(merisc_flash_init);