avr32: remove support for AVR32 architecture

[sfrench/cifs-2.6.git] / arch / avr32 / boards / atstk1000 / flash.c

diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
deleted file mode 100644 (file)
index 6e4d561..0000000
--- a/arch/avr32/boards/atstk1000/flash.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * ATSTK1000 board-specific flash initialization
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-       .ncs_read_setup         = 0,
-       .nrd_setup              = 40,
-       .ncs_write_setup        = 0,
-       .nwe_setup              = 10,
-
-       .ncs_read_pulse         = 80,
-       .nrd_pulse              = 40,
-       .ncs_write_pulse        = 65,
-       .nwe_pulse              = 55,
-
-       .read_cycle             = 120,
-       .write_cycle            = 120,
-};
-
-static struct smc_config flash_config __initdata = {
-       .bus_width              = 2,
-       .nrd_controlled         = 1,
-       .nwe_controlled         = 1,
-       .byte_write             = 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-       {
-               .name           = "u-boot",
-               .offset         = 0x00000000,
-               .size           = 0x00020000,           /* 128 KiB */
-               .mask_flags     = MTD_WRITEABLE,
-       },
-       {
-               .name           = "root",
-               .offset         = 0x00020000,
-               .size           = 0x007d0000,
-       },
-       {
-               .name           = "env",
-               .offset         = 0x007f0000,
-               .size           = 0x00010000,
-               .mask_flags     = MTD_WRITEABLE,
-       },
-};
-
-static struct physmap_flash_data flash_data = {
-       .width          = 2,
-       .nr_parts       = ARRAY_SIZE(flash_parts),
-       .parts          = flash_parts,
-};
-
-static struct resource flash_resource = {
-       .start          = 0x00000000,
-       .end            = 0x007fffff,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .resource       = &flash_resource,
-       .num_resources  = 1,
-       .dev            = {
-               .platform_data = &flash_data,
-       },
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init atstk1000_flash_init(void)
-{
-       int ret;
-
-       smc_set_timing(&flash_config, &flash_timing);
-       ret = smc_set_configuration(0, &flash_config);
-       if (ret < 0) {
-               printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
-               return ret;
-       }
-
-       platform_device_register(&flash_device);
-
-       return 0;
-}
-device_initcall(atstk1000_flash_init);