avr32: remove support for AVR32 architecture

[sfrench/cifs-2.6.git] / arch / avr32 / boards / atstk1000 / atstk1004.c

diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
deleted file mode 100644 (file)
index 69a9f0f..0000000
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * ATSTK1003 daughterboard-specific init code
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <linux/spi/at73c213.h>
-#include <linux/spi/spi.h>
-#include <linux/atmel-mci.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-       [0] = 32768,    /* 32.768 kHz on RTC osc */
-       [1] = 20000000, /* 20 MHz on osc0 */
-       [2] = 12000000, /* 12 MHz on osc1 */
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static struct at73c213_board_info at73c213_data = {
-       .ssc_id         = 0,
-       .shortname      = "AVR32 STK1000 external DAC",
-};
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-static struct spi_board_info spi0_board_info[] __initdata = {
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-       {
-               /* AT73C213 */
-               .modalias       = "at73c213",
-               .max_speed_hz   = 200000,
-               .chip_select    = 0,
-               .mode           = SPI_MODE_1,
-               .platform_data  = &at73c213_data,
-       },
-#endif
-       {
-               /* QVGA display */
-               .modalias       = "ltv350qv",
-               .max_speed_hz   = 16000000,
-               .chip_select    = 1,
-               .mode           = SPI_MODE_3,
-       },
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-static struct spi_board_info spi1_board_info[] __initdata = { {
-       /* patch in custom entries here */
-} };
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = -ENODEV,
-               .wp_pin         = -ENODEV,
-       },
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static void __init atstk1004_setup_extdac(void)
-{
-       struct clk *gclk;
-       struct clk *pll;
-
-       gclk = clk_get(NULL, "gclk0");
-       if (IS_ERR(gclk))
-               goto err_gclk;
-       pll = clk_get(NULL, "pll0");
-       if (IS_ERR(pll))
-               goto err_pll;
-
-       if (clk_set_parent(gclk, pll)) {
-               pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-               goto err_set_clk;
-       }
-
-       at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
-       at73c213_data.dac_clk = gclk;
-
-err_set_clk:
-       clk_put(pll);
-err_pll:
-       clk_put(gclk);
-err_gclk:
-       return;
-}
-#else
-static void __init atstk1004_setup_extdac(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
-void __init setup_board(void)
-{
-#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-       at32_map_usart(0, 1, 0);        /* USART 0/B: /dev/ttyS1, IRDA */
-#else
-       at32_map_usart(1, 0, 0);        /* USART 1/A: /dev/ttyS0, DB9 */
-#endif
-       /* USART 2/unused: expansion connector */
-       at32_map_usart(3, 2, 0);        /* USART 3/C: /dev/ttyS2, DB9 */
-
-       at32_setup_serial_console(0);
-}
-
-static int __init atstk1004_init(void)
-{
-#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-       at32_add_device_usart(1);
-#else
-       at32_add_device_usart(0);
-#endif
-       at32_add_device_usart(2);
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-       at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-#endif
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-       at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-       at32_add_device_mci(0, &mci0_data);
-#endif
-       at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-                            fbmem_start, fbmem_size,
-                            ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
-       at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-       at32_add_device_ssc(0, ATMEL_SSC_TX);
-#endif
-
-       atstk1000_setup_j2_leds();
-       atstk1004_setup_extdac();
-
-       return 0;
-}
-postcore_initcall(atstk1004_init);