Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

[sfrench/cifs-2.6.git] / arch / arm64 / boot / dts / qcom / sc7180-trogdor-lazor.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
new file mode 100644 (file)
index 0000000..180ef9e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+       panel: panel {
+               compatible = "boe,nv133fhm-n62";
+               power-supply = <&pp3300_dx_edp>;
+               backlight = <&backlight>;
+               hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+               ports {
+                       port {
+                               panel_in_edp: endpoint {
+                                       remote-endpoint = <&sn65dsi86_out>;
+                               };
+                       };
+               };
+       };
+};
+
+&ap_sar_sensor {
+       status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       ap_ts: touchscreen@10 {
+               compatible = "hid-over-i2c";
+               reg = <0x10>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+               interrupt-parent = <&tlmm>;
+               interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+               post-power-on-delay-ms = <20>;
+               hid-descr-addr = <0x0001>;
+
+               vdd-supply = <&pp3300_ts>;
+       };
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&ts_reset_l {
+       pinconf {
+               /* This pin is not connected on -rev0, pull up to park. */
+               /delete-property/bias-disable;
+               bias-pull-up;
+       };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+       gpio-line-names = "ESIM_MISO",
+                         "ESIM_MOSI",
+                         "ESIM_CLK",
+                         "ESIM_CS_L",
+                         "",
+                         "",
+                         "AP_TP_I2C_SDA",
+                         "AP_TP_I2C_SCL",
+                         "TS_RESET_L",
+                         "TS_INT_L",
+                         "",
+                         "EDP_BRIJ_IRQ",
+                         "AP_EDP_BKLTEN",
+                         "AP_RAM_ID2",
+                         "",
+                         "EDP_BRIJ_I2C_SDA",
+                         "EDP_BRIJ_I2C_SCL",
+                         "HUB_RST_L",
+                         "",
+                         "AP_RAM_ID1",
+                         "AP_SKU_ID2",
+                         "",
+                         "",
+                         "AMP_EN",
+                         "P_SENSOR_INT_L",
+                         "AP_SAR_SENSOR_SDA",
+                         "AP_SAR_SENSOR_SCL",
+                         "",
+                         "HP_IRQ",
+                         "AP_RAM_ID0",
+                         "EN_PP3300_DX_EDP",
+                         "AP_BRD_ID2",
+                         "BRIJ_SUSPEND",
+                         "AP_BRD_ID0",
+                         "AP_H1_SPI_MISO",
+                         "AP_H1_SPI_MOSI",
+                         "AP_H1_SPI_CLK",
+                         "AP_H1_SPI_CS_L",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "H1_AP_INT_ODL",
+                         "",
+                         "UART_AP_TX_DBG_RX",
+                         "UART_DBG_TX_AP_RX",
+                         "HP_I2C_SDA",
+                         "HP_I2C_SCL",
+                         "FORCED_USB_BOOT",
+                         "",
+                         "",
+                         "AMP_DIN",
+                         "",
+                         "HP_BCLK",
+                         "HP_LRCLK",
+                         "HP_DOUT",
+                         "HP_DIN",
+                         "HP_MCLK",
+                         "TRACKPAD_INT_1V8_ODL",
+                         "AP_EC_SPI_MISO",
+                         "AP_EC_SPI_MOSI",
+                         "AP_EC_SPI_CLK",
+                         "AP_EC_SPI_CS_L",
+                         "AP_SPI_CLK",
+                         "AP_SPI_MOSI",
+                         "AP_SPI_MISO",
+                         /*
+                          * AP_FLASH_WP_L is crossystem ABI. Schematics
+                          * call it BIOS_FLASH_WP_L.
+                          */
+                         "AP_FLASH_WP_L",
+                         "DBG_SPI_HOLD_L",
+                         "AP_SPI_CS0_L",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "UIM2_DATA",
+                         "UIM2_CLK",
+                         "UIM2_RST",
+                         "UIM2_PRESENT",
+                         "UIM1_DATA",
+                         "UIM1_CLK",
+                         "UIM1_RST",
+                         "",
+                         "EN_PP3300_CODEC",
+                         "EN_PP3300_HUB",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "AP_SKU_ID1",
+                         "AP_RST_REQ",
+                         "",
+                         "AP_BRD_ID1",
+                         "AP_EC_INT_L",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "EDP_BRIJ_EN",
+                         "AP_SKU_ID0",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "",
+                         "AP_TS_PEN_I2C_SDA",
+                         "AP_TS_PEN_I2C_SCL",
+                         "DP_HOT_PLUG_DET",
+                         "EC_IN_RW_ODL";
+};