#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
},
};
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init qt2410_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init qt2410_machine_init(void)
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_led_gpio_table);
+ gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
}