ARM: remove ks8695 platform

[sfrench/cifs-2.6.git] / arch / arm / mach-ks8695 / include / mach / regs-uart.h

diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
deleted file mode 100644 (file)
index 941a542..0000000
--- a/arch/arm/mach-ks8695/include/mach/regs-uart.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ks8695/include/mach/regs-uart.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - UART register and bit definitions.
- */
-
-#ifndef KS8695_UART_H
-#define KS8695_UART_H
-
-#define KS8695_UART_OFFSET     (0xF0000 + 0xE000)
-#define KS8695_UART_VA         (KS8695_IO_VA + KS8695_UART_OFFSET)
-#define KS8695_UART_PA         (KS8695_IO_PA + KS8695_UART_OFFSET)
-
-
-/*
- * UART registers
- */
-#define KS8695_URRB    (0x00)          /* Receive Buffer Register */
-#define KS8695_URTH    (0x04)          /* Transmit Holding Register */
-#define KS8695_URFC    (0x08)          /* FIFO Control Register */
-#define KS8695_URLC    (0x0C)          /* Line Control Register */
-#define KS8695_URMC    (0x10)          /* Modem Control Register */
-#define KS8695_URLS    (0x14)          /* Line Status Register */
-#define KS8695_URMS    (0x18)          /* Modem Status Register */
-#define KS8695_URBD    (0x1C)          /* Baud Rate Divisor Register */
-#define KS8695_USR     (0x20)          /* Status Register */
-
-
-/* FIFO Control Register */
-#define URFC_URFRT     (3 << 6)        /* Receive FIFO Trigger Level */
-#define                URFC_URFRT_1    (0 << 6)
-#define                URFC_URFRT_4    (1 << 6)
-#define                URFC_URFRT_8    (2 << 6)
-#define                URFC_URFRT_14   (3 << 6)
-#define URFC_URTFR     (1 << 2)        /* Transmit FIFO Reset */
-#define URFC_URRFR     (1 << 1)        /* Receive FIFO Reset */
-#define URFC_URFE      (1 << 0)        /* FIFO Enable */
-
-/* Line Control Register */
-#define URLC_URSBC     (1 << 6)        /* Set Break Condition */
-#define URLC_PARITY    (7 << 3)        /* Parity */
-#define                URPE_NONE       (0 << 3)
-#define                URPE_ODD        (1 << 3)
-#define                URPE_EVEN       (3 << 3)
-#define                URPE_MARK       (5 << 3)
-#define                URPE_SPACE      (7 << 3)
-#define URLC_URSB      (1 << 2)        /* Stop Bits */
-#define URLC_URCL      (3 << 0)        /* Character Length */
-#define                URCL_5          (0 << 0)
-#define                URCL_6          (1 << 0)
-#define                URCL_7          (2 << 0)
-#define                URCL_8          (3 << 0)
-
-/* Modem Control Register */
-#define URMC_URLB      (1 << 4)        /* Loop-back mode */
-#define URMC_UROUT2    (1 << 3)        /* OUT2 signal */
-#define URMC_UROUT1    (1 << 2)        /* OUT1 signal */
-#define URMC_URRTS     (1 << 1)        /* Request to Send */
-#define URMC_URDTR     (1 << 0)        /* Data Terminal Ready */
-
-/* Line Status Register */
-#define URLS_URRFE     (1 << 7)        /* Receive FIFO Error */
-#define URLS_URTE      (1 << 6)        /* Transmit Empty */
-#define URLS_URTHRE    (1 << 5)        /* Transmit Holding Register Empty */
-#define URLS_URBI      (1 << 4)        /* Break Interrupt */
-#define URLS_URFE      (1 << 3)        /* Framing Error */
-#define URLS_URPE      (1 << 2)        /* Parity Error */
-#define URLS_URROE     (1 << 1)        /* Receive Overrun Error */
-#define URLS_URDR      (1 << 0)        /* Receive Data Ready */
-
-/* Modem Status Register */
-#define URMS_URDCD     (1 << 7)        /* Data Carrier Detect */
-#define URMS_URRI      (1 << 6)        /* Ring Indicator */
-#define URMS_URDSR     (1 << 5)        /* Data Set Ready */
-#define URMS_URCTS     (1 << 4)        /* Clear to Send */
-#define URMS_URDDCD    (1 << 3)        /* Delta Data Carrier Detect */
-#define URMS_URTERI    (1 << 2)        /* Trailing Edge Ring Indicator */
-#define URMS_URDDST    (1 << 1)        /* Delta Data Set Ready */
-#define URMS_URDCTS    (1 << 0)        /* Delta Clear to Send */
-
-/* Status Register */
-#define USR_UTI                (1 << 0)        /* Timeout Indication */
-
-
-#endif