def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config IMX_HAVE_IOMUX_V1
- bool
+if ARCH_MULTI_V6
-config ARCH_MXC_IOMUX_V3
- bool
-
-config SOC_IMX21
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
-
-config SOC_IMX27
- bool
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
- select MXC_AVIC
- select PINCTRL_IMX27
+comment "ARM1136 platforms"
config SOC_IMX31
- bool
+ bool "i.MX31 support"
select CPU_V6
select MXC_AVIC
+ help
+ This enables support for Freescale i.MX31 processor
config SOC_IMX35
- bool
- select ARCH_MXC_IOMUX_V3
+ bool "i.MX35 support"
select MXC_AVIC
select PINCTRL_IMX35
-
-if ARCH_MULTI_V5
-
-comment "MX21 platforms:"
-
-config MACH_MX21ADS
- bool "MX21ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select SOC_IMX21
- help
- Include support for MX21ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "MX27 platforms:"
-
-config MACH_MX27ADS
- bool "MX27ADS platform"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select SOC_IMX27
- help
- Include support for MX27ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX27_3DS
- bool "MX27PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for MX27PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX27_VISSTRIM_M10
- bool "Vista Silicon i.MX27 Visstrim_m10"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MX2_CAMERA
- select IMX_HAVE_PLATFORM_MX2_EMMA
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select LEDS_GPIO_REGISTER
- select SOC_IMX27
- help
- Include support for Visstrim_m10 platform and its different variants.
- This includes specific configurations for the board and its
- peripherals.
-
-config MACH_PCA100
- bool "Phytec phyCARD-s (pca100)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for phyCARD-s (aka pca100) platform. This
- includes specific configurations for the module and its peripherals.
-
-config MACH_IMX27_DT
- bool "Support i.MX27 platforms from device tree"
- select SOC_IMX27
- help
- Include support for Freescale i.MX27 based platforms
- using the device tree for discovery
-
-endif
-
-if ARCH_MULTI_V6
-
-comment "MX31 platforms:"
-
-config MACH_MX31ADS
- bool "Support MX31ADS platforms"
- default y
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for MX31ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
- bool "Support Wolfson Microelectronics 1133-EV1 module"
- depends on MACH_MX31ADS
- depends on MFD_WM8350_I2C
- depends on REGULATOR_WM8350 = y
help
- Include support for the Wolfson Microelectronics 1133-EV1 PMU
- and audio module for the MX31ADS platform.
-
-config MACH_MX31LILLY
- bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31 based LILLY1131 modules. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX31LITE
- bool "Support MX31 LITEKIT (LogicPD)"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_PCM037
- bool "Support Phytec pcm037 (i.MX31) platforms"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Phytec pcm037 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
- bool "Support pcm037 EET board extensions"
- depends on MACH_PCM037
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Add support for PCM037 EET baseboard extensions. If you are using the
- OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
- command-line parameter.
-
-config MACH_MX31_3DS
- bool "Support MX31PDK (3DS)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for MX31PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
- bool "Make the MXC NAND driver use the in flash Bad Block Table"
- depends on MACH_MX31_3DS
- depends on MTD_NAND_MXC
- help
- Enable this if you want that the MXC NAND driver uses the in flash
- Bad Block Table to know what blocks are bad instead of scanning the
- entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
- bool "Support mx31moboard platforms (EPFL Mobots group)"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for mx31moboard platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_QONG
- bool "Support Dave/DENX QongEVB-LITE platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for Dave/DENX QongEVB-LITE platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
- bool "Support Atmark Armadillo-500 Development Base Board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX31
- help
- Include support for Atmark Armadillo-500 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
- bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for KZM-ARM11-01. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_BUG
- bool "Support Buglabs BUGBase platform"
- default y
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX31
- help
- Include support for BUGBase 1.3 platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_IMX31_DT
- bool "Support i.MX31 platforms from device tree"
- select SOC_IMX31
- help
- Include support for Freescale i.MX31 based platforms
- using the device tree for discovery.
-
-comment "MX35 platforms:"
-
-config MACH_IMX35_DT
- bool "Support i.MX35 platforms from device tree"
- select SOC_IMX35
- help
- Include support for Freescale i.MX35 based platforms
- using the device tree for discovery.
-
-config MACH_PCM043
- bool "Support Phytec pcm043 (i.MX35) platforms"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX35
- help
- Include support for Phytec pcm043 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
- bool "Support MX35PDK platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_DEBUG_BOARD
- select SOC_IMX35
- help
- Include support for MX35PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_VPR200
- bool "Support VPR200 platform"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX35
- help
- Include support for VPR200 platform. This includes specific
- configurations for the board and its peripherals.
+ This enables support for Freescale i.MX31 processor
endif
-comment "Device tree only"
-
if ARCH_MULTI_V4T
config SOC_IMX1
config SOC_IMX25
bool "i.MX25 support"
- select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
+
+config SOC_IMX27
+ bool "i.MX27 support"
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX27
+ help
+ This enables support for Freescale i.MX27 processor
+
endif
if ARCH_MULTI_V7
endif
-comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
-
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
config SOC_IMX7D_CA7
bool
select ARM_GIC
endif
-source "arch/arm/mach-imx/devices/Kconfig"
-
endif
git.samba.org / sfrench / cifs-2.6.git / blobdiff