ARM: dts: Move .dts files to vendor sub-directories

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun7i-a20-icnova-swac.dts

diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
deleted file mode 100644 (file)
index 413505f..0000000
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2015 Stefan Roese <sr@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-       model = "ICnova-A20 SWAC";
-       compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
-                    "allwinner,sun7i-a20";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&cpu0 {
-       cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-       status = "okay";
-};
-
-&ehci1 {
-       status = "okay";
-};
-
-&gmac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&gmac_mii_pins>;
-       phy-handle = <&phy1>;
-       phy-mode = "mii";
-       status = "okay";
-};
-
-&i2c0 {
-       status = "okay";
-
-       axp209: pmic@34 {
-               reg = <0x34>;
-               interrupt-parent = <&nmi_intc>;
-               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-       };
-};
-
-&i2c1 {
-       status = "okay";
-};
-
-&gmac_mdio {
-       phy1: ethernet-phy@1 {
-               reg = <1>;
-       };
-};
-
-&mmc0 {
-       vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
-       status = "okay";
-};
-
-&ohci0 {
-       status = "okay";
-};
-
-&ohci1 {
-       status = "okay";
-};
-
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-       regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "avcc";
-};
-
-&reg_usb1_vbus {
-       status = "okay";
-};
-
-&reg_usb2_vbus {
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pb_pins>;
-       status = "okay";
-};
-
-&usbphy {
-       usb1_vbus-supply = <&reg_usb1_vbus>;
-       usb2_vbus-supply = <&reg_usb2_vbus>;
-       status = "okay";
-};