ARM: dts: Move .dts files to vendor sub-directories

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / bcm2835-rpi-b-rev2.dts

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
deleted file mode 100644 (file)
index 4e1770a..0000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-       compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
-       model = "Raspberry Pi Model B rev2";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0 0x10000000>;
-       };
-};
-
-&gpio {
-       /*
-        * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
-        * RPI00022 sheet 02
-        *
-        * Legend:
-        * "FOO" = GPIO line named "FOO" on the schematic
-        * "FOO_N" = GPIO line named "FOO" on schematic, active low
-        */
-       gpio-line-names = "SDA0",
-                         "SCL0",
-                         "SDA1",
-                         "SCL1",
-                         "GPIO_GCLK",
-                         "CAM_CLK",
-                         "LAN_RUN",
-                         "SPI_CE1_N",
-                         "SPI_CE0_N",
-                         "SPI_MISO",
-                         "SPI_MOSI",
-                         "SPI_SCLK",
-                         "", /* GPIO12 */
-                         "", /* GPIO13 */
-                         /* Serial port */
-                         "TXD0",
-                         "RXD0",
-                         "STATUS_LED_N",
-                         "GPIO17",
-                         "GPIO18",
-                         "", /* GPIO19 */
-                         "", /* GPIO20 */
-                         "CAM_GPIO",
-                         "GPIO22",
-                         "GPIO23",
-                         "GPIO24",
-                         "GPIO25",
-                         "", /* GPIO26 */
-                         "GPIO27",
-                         "GPIO28",
-                         "GPIO29",
-                         "GPIO30",
-                         "GPIO31",
-                         "", /* GPIO32 */
-                         "", /* GPIO33 */
-                         "", /* GPIO34 */
-                         "", /* GPIO35 */
-                         "", /* GPIO36 */
-                         "", /* GPIO37 */
-                         "", /* GPIO38 */
-                         "", /* GPIO39 */
-                         "PWM0_OUT",
-                         "", /* GPIO41 */
-                         "", /* GPIO42 */
-                         "", /* GPIO43 */
-                         "", /* GPIO44 */
-                         "PWM1_OUT",
-                         "HDMI_HPD_P",
-                         "SD_CARD_DET",
-                         /* Used by SD Card */
-                         "SD_CLK_R",
-                         "SD_CMD_R",
-                         "SD_DATA0_R",
-                         "SD_DATA1_R",
-                         "SD_DATA2_R",
-                         "SD_DATA3_R";
-
-       pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
-
-       /* I2S interface */
-       i2s_alt2: i2s_alt2 {
-               brcm,pins = <28 29 30 31>;
-               brcm,function = <BCM2835_FSEL_ALT2>;
-       };
-};
-
-&hdmi {
-       hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-       power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-       status = "okay";
-};
-
-&led_act {
-       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-};
-
-&pwm {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-       status = "okay";
-};
-
-&sdhost {
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdhost_gpio48>;
-       bus-width = <4>;
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
-       status = "okay";
-};