ARM: dts: Move .dts files to vendor sub-directories

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / at91-wb50n.dtsi

diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
deleted file mode 100644 (file)
index 74b249b..0000000
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
- *
- *  Copyright (C) 2018 Laird
- *
- */
-
-#include "sama5d31.dtsi"
-
-/ {
-       model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
-       compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-       chosen {
-               bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory@20000000 {
-               reg = <0x20000000 0x4000000>;
-       };
-};
-
-&pinctrl {
-       board {
-               pinctrl_mmc0_cd: mmc0_cd {
-                       atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
-               };
-
-               pinctrl_usba_vbus: usba_vbus {
-                       atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
-               };
-       };
-};
-
-&slow_xtal {
-       clock-frequency = <32768>;
-};
-
-&main_xtal {
-       clock-frequency = <12000000>;
-};
-
-&clk32k {
-       atmel,osc-bypass;
-};
-
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-       cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
-       slot@0 {
-               reg = <0>;
-               bus-width = <4>;
-       };
-};
-
-&mmc1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
-       status = "okay";
-       atheros@0 {
-               compatible = "atheros,ath6kl";
-               atheros,board-id = "SD32";
-               reg = <0>;
-               bus-width = <4>;
-       };
-};
-
-&macb1 {
-       phy-mode = "rmii";
-};
-
-&dbgu {
-       dmas = <0>, <0>;        /*  Do not use DMA for dbgu */
-};
-
-/* On BB40 this port is labeled UART1 */
-&usart0 {
-       atmel,use-dma-rx;
-       atmel,use-dma-tx;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
-};
-
-/* On BB40 this port is labeled UART0 */
-&usart1 {
-       atmel,use-dma-rx;
-       atmel,use-dma-tx;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-       dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
-       dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
-       dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
-       rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
-};
-
-/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
-&usart3 {
-       atmel,use-dma-rx;
-       atmel,use-dma-tx;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
-       status = "okay";
-};
-
-&spi1 {
-       cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
-};
-
-&ebi {
-       pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&nand_controller {
-       status = "okay";
-
-       nand: nand@3 {
-               reg = <0x3 0x0 0x2>;
-               atmel,rb = <0>;
-               nand-bus-width = <8>;
-               nand-ecc-mode = "hw";
-               nand-ecc-strength = <8>;
-               nand-ecc-step-size = <512>;
-               nand-on-flash-bbt;
-               label = "atmel_nand";
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       at91bootstrap@0 {
-                               label = "at91bs";
-                               reg = <0x0 0x20000>;
-                       };
-
-                       uboot@20000 {
-                               label = "u-boot";
-                               reg = <0x20000 0x80000>;
-                       };
-
-                       ubootenv@a0000 {
-                               label = "u-boot-env";
-                               reg = <0xa0000 0x20000>;
-                       };
-
-                       ubootenv@c0000 {
-                               label = "u-boot-env";
-                               reg = <0xc0000 0x20000>;
-                       };
-
-                       kernel-a@e0000 {
-                               label = "kernel-a";
-                               reg = <0xe0000 0x500000>;
-                       };
-
-                       kernel-b@5e0000 {
-                               label = "kernel-b";
-                               reg = <0x5e0000 0x500000>;
-                       };
-
-                       rootfs-a@ae0000 {
-                               label = "rootfs-a";
-                               reg = <0xae0000 0x3000000>;
-                       };
-
-                       rootfs-b@3ae0000 {
-                               label = "rootfs-b";
-                               reg = <0x3ae0000 0x3000000>;
-                       };
-
-                       user@6ae0000 {
-                               label = "user";
-                               reg = <0x6ae0000 0x14e0000>;
-                       };
-               };
-       };
-};
-
-&usb0 {
-       atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usba_vbus>;
-};
-
-&usb1 {
-       num-ports = <3>;
-       atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
-       atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
-};