ARM: dts: Move .dts files to vendor sub-directories

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / at91-ariettag25.dts

diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
deleted file mode 100644 (file)
index 2c52a71..0000000
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Arietta G25
- * This device tree is minimal, to activate more peripherals, see:
- * http://dts.acmesystems.it/arietta/
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
-       model = "Acme Systems Arietta G25";
-       compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory@20000000 {
-               reg = <0x20000000 0x8000000>;
-       };
-
-       clocks {
-               slow_xtal {
-                       clock-frequency = <32768>;
-               };
-
-               main_xtal {
-                       clock-frequency = <12000000>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               arietta_led {
-                       label = "arietta_led";
-                       gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
-                       linux,default-trigger = "heartbeat";
-               };
-       };
-};
-
-&dbgu {
-       status = "okay";
-};
-
-&mmc0 {
-       pinctrl-0 = <
-               &pinctrl_mmc0_slot0_clk_cmd_dat0
-               &pinctrl_mmc0_slot0_dat1_3>;
-       pinctrl-names = "default";
-       status = "okay";
-
-       slot@0 {
-               reg = <0>;
-               bus-width = <4>;
-       };
-};
-
-&rtc {
-       status = "okay";
-};
-
-&tcb0 {
-       timer@0 {
-               compatible = "atmel,tcb-timer";
-               reg = <0>;
-       };
-
-       timer@1 {
-               compatible = "atmel,tcb-timer";
-               reg = <1>;
-       };
-};
-
-&usb0 {
-       num-ports = <3>;
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};
-
-&usb2 {
-       status = "okay";
-};