docs: leds: convert to ReST

[sfrench/cifs-2.6.git] / Documentation / leds / ledtrig-oneshot.rst

diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.rst
similarity index 90%
rename from Documentation/leds/ledtrig-oneshot.txt
rename to Documentation/leds/ledtrig-oneshot.rst
index fe57474a12e2af1e9210f14b175cae42d0d1b834..69fa3ea1d554f3a04d620b369d61116add16fb73 100644 (file)
--- a/Documentation/leds/ledtrig-oneshot.txt
+++ b/Documentation/leds/ledtrig-oneshot.rst
@@ -1,3 +1,4 @@
+====================
 One-shot LED Trigger
 ====================
 
@@ -17,27 +18,27 @@ additional "invert" property specifies if the LED has to stay off (normal) or
 on (inverted) when not rearmed.
 
 The trigger can be activated from user space on led class devices as shown
-below:
+below::
 
   echo oneshot > trigger
 
 This adds sysfs attributes to the LED that are documented in:
 Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
 
-Example use-case: network devices, initialization:
+Example use-case: network devices, initialization::
 
   echo oneshot > trigger # set trigger for this led
   echo 33 > delay_on     # blink at 1 / (33 + 33) Hz on continuous traffic
   echo 33 > delay_off
 
-interface goes up:
+interface goes up::
 
   echo 1 > invert # set led as normally-on, turn the led on
 
-packet received/transmitted:
+packet received/transmitted::
 
   echo 1 > shot # led starts blinking, ignored if already blinking
 
-interface goes down
+interface goes down::
 
   echo 0 > invert # set led as normally-off, turn the led off