docs: hwmon: convert remaining files to ReST format

[sfrench/cifs-2.6.git] / Documentation / hwmon / abituguru3

diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3
index a6ccfe4bb6aaaf531f5e531569aafb259c3934da..514f11f41e8b523025f31482d081c9d09bad503c 100644 (file)
--- a/Documentation/hwmon/abituguru3
+++ b/Documentation/hwmon/abituguru3
@@ -3,41 +3,51 @@ Kernel driver abituguru3
 
 Supported chips:
   * Abit uGuru revision 3 (Hardware Monitor part, reading only)
+
     Prefix: 'abituguru3'
+
     Addresses scanned: ISA 0x0E0
+
     Datasheet: Not available, this driver is based on reverse engineering.
+
     Note:
        The uGuru is a microcontroller with onboard firmware which programs
        it to behave as a hwmon IC. There are many different revisions of the
        firmware and thus effectivly many different revisions of the uGuru.
        Below is an incomplete list with which revisions are used for which
        Motherboards:
-       uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7)
-       uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
-       uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
-       uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
-       uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
-                                AW9D-MAX)
+
+       - uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7)
+       - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+       - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+       - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+       - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
+         AW9D-MAX)
+
        The abituguru3 driver is only for revison 3.0.x.x motherboards,
        this driver will not work on older motherboards. For older
        motherboards use the abituguru (without the 3 !) driver.
 
 Authors:
-       Hans de Goede <j.w.r.degoede@hhs.nl>,
-       (Initial reverse engineering done by Louis Kruger)
+       - Hans de Goede <j.w.r.degoede@hhs.nl>,
+       - (Initial reverse engineering done by Louis Kruger)
 
 
 Module Parameters
 -----------------
 
-* force: bool          Force detection. Note this parameter only causes the
+* force: bool
+                       Force detection. Note this parameter only causes the
                        detection to be skipped, and thus the insmod to
                        succeed. If the uGuru can't be read the actual hwmon
                        driver will not load and thus no hwmon device will get
                        registered.
-* verbose: bool                Should the driver be verbose?
-                       0/off/false  normal output
-                       1/on/true    + verbose error reporting (default)
+* verbose: bool
+                       Should the driver be verbose?
+
+                       * 0/off/false  normal output
+                       * 1/on/true    + verbose error reporting (default)
+
                        Default: 1 (the driver is still in the testing phase)
 
 Description
@@ -62,4 +72,4 @@ neither is writing any of the sensor settings and writing / reading the
 fanspeed control registers (FanEQ)
 
 If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and
-include the output of: "dmesg | grep abituguru"
+include the output of: `dmesg | grep abituguru`