dt-bindings: power: supply: pm8941-coincell: Convert to DT schema format

[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / power / supply / qcom,coincell-charger.txt

diff --git a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
deleted file mode 100644 (file)
index 7478992..0000000
--- a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Qualcomm Coincell Charger:
-
-The hardware block controls charging for a coincell or capacitor that is
-used to provide power backup for certain features of the power management
-IC (PMIC)
-
-- compatible:
-       Usage: required
-       Value type: <string>
-       Definition: must be: "qcom,pm8941-coincell"
-
-- reg:
-       Usage: required
-       Value type: <u32>
-       Definition: base address of the coincell charger registers
-
-- qcom,rset-ohms:
-       Usage: required
-       Value type: <u32>
-       Definition: resistance (in ohms) for current-limiting resistor
-               must be one of: 800, 1200, 1700, 2100
-
-- qcom,vset-millivolts:
-       Usage: required
-       Value type: <u32>
-       Definition: voltage (in millivolts) to apply for charging
-               must be one of: 2500, 3000, 3100, 3200
-
-- qcom,charger-disable:
-       Usage: optional
-       Value type: <boolean>
-       Definition: defining this property disables charging
-
-This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
-as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
-../mfd/qcom-pm8xxx.txt
-
-Example:
-
-       pm8941@0 {
-               coincell@2800 {
-                       compatible = "qcom,pm8941-coincell";
-                       reg = <0x2800>;
-
-                       qcom,rset-ohms = <2100>;
-                       qcom,vset-millivolts = <3000>;
-               };
-       };