dt-bindings: mmc: samsung,s3c6410-sdhci: convert to dtschema

[sfrench/cifs-2.6.git] / Documentation / devicetree / bindings / mmc / samsung-sdhci.txt

diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
deleted file mode 100644 (file)
index 42e0a9a..0000000
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung's SDHCI Controller device tree bindings
-
-Samsung's SDHCI controller is used as a connectivity interface with external
-MMC, SD and eMMC storage mediums. This file documents differences between the
-core mmc properties described by mmc.txt and the properties used by the
-Samsung implementation of the SDHCI controller.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
-    controller.
-  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
-    controller.
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Example:
-       sdhci@12530000 {
-               compatible = "samsung,exynos4210-sdhci";
-               reg = <0x12530000 0x100>;
-               interrupts = <0 75 0>;
-               bus-width = <4>;
-               cd-gpios = <&gpk2 2 0>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-       };
-
-       Note: This example shows both SoC specific and board specific properties
-       in a single device node. The properties can be actually be separated
-       into SoC specific node and board specific node.