-Tegra124 SoC SATA AHCI controller
+Tegra SoC SATA AHCI controller
Required properties :
-- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
- must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
- is tegra132.
+- compatible : Must be one of:
+ - Tegra124 : "nvidia,tegra124-ahci"
+ - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
+ - Tegra210 : "nvidia,tegra210-ahci"
- reg : Should contain 2 entries:
- AHCI register set (SATA BAR5)
- SATA register set
- clock-names : Must include the following entries:
- sata
- sata-oob
- - cml1
- - pll_e
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- phys : Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
- phy-names : Must include the following entries:
- - sata-phy : XUSB PADCTL SATA PHY
-- hvdd-supply : Defines the SATA HVDD regulator
-- vddio-supply : Defines the SATA VDDIO regulator
-- avdd-supply : Defines the SATA AVDD regulator
-- target-5v-supply : Defines the SATA 5V power regulator
-- target-12v-supply : Defines the SATA 12V power regulator
+ - For Tegra124 and Tegra132:
+ - sata-phy : XUSB PADCTL SATA PHY
+- For Tegra124 and Tegra132:
+ - hvdd-supply : Defines the SATA HVDD regulator
+ - vddio-supply : Defines the SATA VDDIO regulator
+ - avdd-supply : Defines the SATA AVDD regulator
+ - target-5v-supply : Defines the SATA 5V power regulator
+ - target-12v-supply : Defines the SATA 12V power regulator
+
+Optional properties:
+- reg :
+ - AUX register set
+- clock-names :
+ - cml1 :
+ cml1 clock should be defined here if the PHY driver
+ doesn't manage them. If it does, they should not be.
+- phy-names :
+ - For T210:
+ - sata-phy