--- /dev/null
+/* infback9.c -- inflate deflate64 data using a call-back interface
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infback9.h"
+#include "inftree9.h"
+#include "inflate9.h"
+
+#define WSIZE 65536UL
+
+/*
+ strm provides memory allocation functions in zalloc and zfree, or
+ Z_NULL to use the library memory allocation functions.
+
+ window is a user-supplied window and output buffer that is 64K bytes.
+ */
+int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
+z_stream FAR *strm;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL || window == Z_NULL)
+ return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+ state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+ sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (voidpf)state;
+ state->window = window;
+ return Z_OK;
+}
+
+/*
+ Build and output length and distance decoding tables for fixed code
+ decoding.
+ */
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+void makefixed9(void)
+{
+ unsigned sym, bits, low, size;
+ code *next, *lenfix, *distfix;
+ struct inflate_state state;
+ code fixed[544];
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state.lens[sym++] = 8;
+ while (sym < 256) state.lens[sym++] = 9;
+ while (sym < 280) state.lens[sym++] = 7;
+ while (sym < 288) state.lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state.lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work);
+
+ /* write tables */
+ puts(" /* inffix9.h -- table for decoding deflate64 fixed codes");
+ puts(" * Generated automatically by makefixed9().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits,
+ lenfix[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 5) == 0) printf("\n ");
+ printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits,
+ distfix[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/* Macros for inflateBack(): */
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Assure that some input is available. If input is requested, but denied,
+ then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+ do { \
+ if (have == 0) { \
+ have = in(in_desc, &next); \
+ if (have == 0) { \
+ next = Z_NULL; \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+ with an error if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ PULL(); \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflateBack() with
+ an error. */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n <= 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Assure that some output space is available, by writing out the window
+ if it's full. If the write fails, return from inflateBack() with a
+ Z_BUF_ERROR. */
+#define ROOM() \
+ do { \
+ if (left == 0) { \
+ put = window; \
+ left = WSIZE; \
+ wrap = 1; \
+ if (out(out_desc, put, (unsigned)left)) { \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/*
+ strm provides the memory allocation functions and window buffer on input,
+ and provides information on the unused input on return. For Z_DATA_ERROR
+ returns, strm will also provide an error message.
+
+ in() and out() are the call-back input and output functions. When
+ inflateBack() needs more input, it calls in(). When inflateBack() has
+ filled the window with output, or when it completes with data in the
+ window, it calls out() to write out the data. The application must not
+ change the provided input until in() is called again or inflateBack()
+ returns. The application must not change the window/output buffer until
+ inflateBack() returns.
+
+ in() and out() are called with a descriptor parameter provided in the
+ inflateBack() call. This parameter can be a structure that provides the
+ information required to do the read or write, as well as accumulated
+ information on the input and output such as totals and check values.
+
+ in() should return zero on failure. out() should return non-zero on
+ failure. If either in() or out() fails, than inflateBack() returns a
+ Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
+ was in() or out() that caused in the error. Otherwise, inflateBack()
+ returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+ error, or Z_MEM_ERROR if it could not allocate memory for the state.
+ inflateBack() can also return Z_STREAM_ERROR if the input parameters
+ are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
+z_stream FAR *strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+ struct inflate_state FAR *state;
+ unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have; /* available input */
+ unsigned long left; /* available output */
+ inflate_mode mode; /* current inflate mode */
+ int lastblock; /* true if processing last block */
+ int wrap; /* true if the window has wrapped */
+ unsigned long write; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned extra; /* extra bits needed */
+ unsigned long length; /* literal or length of data to copy */
+ unsigned long offset; /* distance back to copy string from */
+ unsigned long copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ code this; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+#include "inffix9.h"
+
+ /* Check that the strm exists and that the state was initialized */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* Reset the state */
+ strm->msg = Z_NULL;
+ mode = TYPE;
+ lastblock = 0;
+ write = 0;
+ wrap = 0;
+ window = state->window;
+ next = strm->next_in;
+ have = next != Z_NULL ? strm->avail_in : 0;
+ hold = 0;
+ bits = 0;
+ put = window;
+ left = WSIZE;
+ lencode = Z_NULL;
+ distcode = Z_NULL;
+
+ /* Inflate until end of block marked as last */
+ for (;;)
+ switch (mode) {
+ case TYPE:
+ /* determine and dispatch block type */
+ if (lastblock) {
+ BYTEBITS();
+ mode = DONE;
+ break;
+ }
+ NEEDBITS(3);
+ lastblock = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = STORED;
+ break;
+ case 1: /* fixed block */
+ lencode = lenfix;
+ lenbits = 9;
+ distcode = distfix;
+ distbits = 5;
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+
+ case STORED:
+ /* get and verify stored block length */
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ mode = BAD;
+ break;
+ }
+ length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %lu\n",
+ length));
+ INITBITS();
+
+ /* copy stored block from input to output */
+ while (length != 0) {
+ copy = length;
+ PULL();
+ ROOM();
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ length -= copy;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ mode = TYPE;
+ break;
+
+ case TABLE:
+ /* get dynamic table entries descriptor */
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+ if (state->nlen > 286) {
+ strm->msg = (char *)"too many length symbols";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: table sizes ok\n"));
+
+ /* get code length code lengths (not a typo) */
+ state->have = 0;
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ lencode = (code const FAR *)(state->next);
+ lenbits = 7;
+ ret = inflate_table9(CODES, state->lens, 19, &(state->next),
+ &(lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+
+ /* get length and distance code code lengths */
+ state->have = 0;
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ this = lencode[BITS(lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.val < 16) {
+ NEEDBITS(this.bits);
+ DROPBITS(this.bits);
+ state->lens[state->have++] = this.val;
+ }
+ else {
+ if (this.val == 16) {
+ NEEDBITS(this.bits + 2);
+ DROPBITS(this.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ mode = BAD;
+ break;
+ }
+ len = (unsigned)(state->lens[state->have - 1]);
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (this.val == 17) {
+ NEEDBITS(this.bits + 3);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(this.bits + 7);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (mode == BAD) break;
+
+ /* build code tables */
+ state->next = state->codes;
+ lencode = (code const FAR *)(state->next);
+ lenbits = 9;
+ ret = inflate_table9(LENS, state->lens, state->nlen,
+ &(state->next), &(lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ mode = BAD;
+ break;
+ }
+ distcode = (code const FAR *)(state->next);
+ distbits = 6;
+ ret = inflate_table9(DISTS, state->lens + state->nlen,
+ state->ndist, &(state->next), &(distbits),
+ state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ mode = LEN;
+
+ case LEN:
+ /* get a literal, length, or end-of-block code */
+ for (;;) {
+ this = lencode[BITS(lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.op && (this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ length = (unsigned)this.val;
+
+ /* process literal */
+ if (this.op == 0) {
+ Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", this.val));
+ ROOM();
+ *put++ = (unsigned char)(length);
+ left--;
+ mode = LEN;
+ break;
+ }
+
+ /* process end of block */
+ if (this.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ mode = TYPE;
+ break;
+ }
+
+ /* invalid code */
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ mode = BAD;
+ break;
+ }
+
+ /* length code -- get extra bits, if any */
+ extra = (unsigned)(this.op) & 31;
+ if (extra != 0) {
+ NEEDBITS(extra);
+ length += BITS(extra);
+ DROPBITS(extra);
+ }
+ Tracevv((stderr, "inflate: length %lu\n", length));
+
+ /* get distance code */
+ for (;;) {
+ this = distcode[BITS(distbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ mode = BAD;
+ break;
+ }
+ offset = (unsigned)this.val;
+
+ /* get distance extra bits, if any */
+ extra = (unsigned)(this.op) & 15;
+ if (extra != 0) {
+ NEEDBITS(extra);
+ offset += BITS(extra);
+ DROPBITS(extra);
+ }
+ if (offset > WSIZE - (wrap ? 0: left)) {
+ strm->msg = (char *)"invalid distance too far back";
+ mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %lu\n", offset));
+
+ /* copy match from window to output */
+ do {
+ ROOM();
+ copy = WSIZE - offset;
+ if (copy < left) {
+ from = put + copy;
+ copy = left - copy;
+ }
+ else {
+ from = put - offset;
+ copy = left;
+ }
+ if (copy > length) copy = length;
+ length -= copy;
+ left -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ } while (length != 0);
+ break;
+
+ case DONE:
+ /* inflate stream terminated properly -- write leftover output */
+ ret = Z_STREAM_END;
+ if (left < WSIZE) {
+ if (out(out_desc, window, (unsigned)(WSIZE - left)))
+ ret = Z_BUF_ERROR;
+ }
+ goto inf_leave;
+
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+
+ default: /* can't happen, but makes compilers happy */
+ ret = Z_STREAM_ERROR;
+ goto inf_leave;
+ }
+
+ /* Return unused input */
+ inf_leave:
+ strm->next_in = next;
+ strm->avail_in = have;
+ return ret;
+}
+
+int ZEXPORT inflateBack9End(strm)
+z_stream FAR *strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
git.samba.org / ira / wip.git / blobdiff