NIU: Add Sun CP3260 ATCA blade support
authorSantwona Behera <santwona.behera@sun.com>
Fri, 14 Nov 2008 22:44:08 +0000 (14:44 -0800)
committerDavid S. Miller <davem@davemloft.net>
Fri, 14 Nov 2008 22:44:08 +0000 (14:44 -0800)
This patch adds support for the Sun CP3260 ATCA blade which is
a N2 based ATCA blade with 2 NIU ports. The NIU ports do not
have on-board PHY.

Signed-off-by: Santwona Behera <santwona.behera@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/niu.c
drivers/net/niu.h

index d8463b1c3df3fe97c459feff6843de56425b028a..be6b4d7e2bb4651a957fe2733f3ad75941a249b4 100644 (file)
@@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val)
 }
 
 /* Mode is always 10G fiber.  */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
 {
        struct niu_link_config *lp = &np->link_config;
        u32 tx_cfg, rx_cfg;
@@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np)
        return 0;
 }
 
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+       struct niu_link_config *lp = &np->link_config;
+       u16 pll_cfg, pll_sts;
+       int max_retry = 100;
+       u64 sig, mask, val;
+       u32 tx_cfg, rx_cfg;
+       unsigned long i;
+       int err;
+
+       tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+                 PLL_TX_CFG_RATE_HALF);
+       rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                 PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                 PLL_RX_CFG_RATE_HALF);
+
+       if (np->port == 0)
+               rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+       if (lp->loopback_mode == LOOPBACK_PHY) {
+               u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+               mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                          ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+               tx_cfg |= PLL_TX_CFG_ENTEST;
+               rx_cfg |= PLL_RX_CFG_ENTEST;
+       }
+
+       /* Initialize PLL for 1G */
+       pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+       err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                        ESR2_TI_PLL_CFG_L, pll_cfg);
+       if (err) {
+               dev_err(np->device, PFX "NIU Port %d "
+                       "serdes_init_niu_1g_serdes: "
+                       "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+               return err;
+       }
+
+       pll_sts = PLL_CFG_ENPLL;
+
+       err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                        ESR2_TI_PLL_STS_L, pll_sts);
+       if (err) {
+               dev_err(np->device, PFX "NIU Port %d "
+                       "serdes_init_niu_1g_serdes: "
+                       "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+               return err;
+       }
+
+       udelay(200);
+
+       /* Initialize all 4 lanes of the SERDES.  */
+       for (i = 0; i < 4; i++) {
+               err = esr2_set_tx_cfg(np, i, tx_cfg);
+               if (err)
+                       return err;
+       }
+
+       for (i = 0; i < 4; i++) {
+               err = esr2_set_rx_cfg(np, i, rx_cfg);
+               if (err)
+                       return err;
+       }
+
+       switch (np->port) {
+       case 0:
+               val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+               mask = val;
+               break;
+
+       case 1:
+               val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+               mask = val;
+               break;
+
+       default:
+               return -EINVAL;
+       }
+
+       while (max_retry--) {
+               sig = nr64(ESR_INT_SIGNALS);
+               if ((sig & mask) == val)
+                       break;
+
+               mdelay(500);
+       }
+
+       if ((sig & mask) != val) {
+               dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+                       "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+               return -ENODEV;
+       }
+
+       return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+       struct niu_link_config *lp = &np->link_config;
+       u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+       int max_retry = 100;
+       u64 sig, mask, val;
+       unsigned long i;
+       int err;
+
+       tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+       rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                 PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                 PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+       if (lp->loopback_mode == LOOPBACK_PHY) {
+               u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+               mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                          ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+               tx_cfg |= PLL_TX_CFG_ENTEST;
+               rx_cfg |= PLL_RX_CFG_ENTEST;
+       }
+
+       /* Initialize PLL for 10G */
+       pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+       err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                        ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+       if (err) {
+               dev_err(np->device, PFX "NIU Port %d "
+                       "serdes_init_niu_10g_serdes: "
+                       "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+               return err;
+       }
+
+       pll_sts = PLL_CFG_ENPLL;
+
+       err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                        ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+       if (err) {
+               dev_err(np->device, PFX "NIU Port %d "
+                       "serdes_init_niu_10g_serdes: "
+                       "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+               return err;
+       }
+
+       udelay(200);
+
+       /* Initialize all 4 lanes of the SERDES.  */
+       for (i = 0; i < 4; i++) {
+               err = esr2_set_tx_cfg(np, i, tx_cfg);
+               if (err)
+                       return err;
+       }
+
+       for (i = 0; i < 4; i++) {
+               err = esr2_set_rx_cfg(np, i, rx_cfg);
+               if (err)
+                       return err;
+       }
+
+       /* check if serdes is ready */
+
+       switch (np->port) {
+       case 0:
+               mask = ESR_INT_SIGNALS_P0_BITS;
+               val = (ESR_INT_SRDY0_P0 |
+                      ESR_INT_DET0_P0 |
+                      ESR_INT_XSRDY_P0 |
+                      ESR_INT_XDP_P0_CH3 |
+                      ESR_INT_XDP_P0_CH2 |
+                      ESR_INT_XDP_P0_CH1 |
+                      ESR_INT_XDP_P0_CH0);
+               break;
+
+       case 1:
+               mask = ESR_INT_SIGNALS_P1_BITS;
+               val = (ESR_INT_SRDY0_P1 |
+                      ESR_INT_DET0_P1 |
+                      ESR_INT_XSRDY_P1 |
+                      ESR_INT_XDP_P1_CH3 |
+                      ESR_INT_XDP_P1_CH2 |
+                      ESR_INT_XDP_P1_CH1 |
+                      ESR_INT_XDP_P1_CH0);
+               break;
+
+       default:
+               return -EINVAL;
+       }
+
+       while (max_retry--) {
+               sig = nr64(ESR_INT_SIGNALS);
+               if ((sig & mask) == val)
+                       break;
+
+               mdelay(500);
+       }
+
+       if ((sig & mask) != val) {
+               pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+                       "[%08x] for 10G...trying 1G\n",
+                       np->port, (int) (sig & mask), (int) val);
+
+               /* 10G failed, try initializing at 1G */
+               err = serdes_init_niu_1g_serdes(np);
+               if (!err) {
+                       np->flags &= ~NIU_FLAGS_10G;
+                       np->mac_xcvr = MAC_XCVR_PCS;
+               }  else {
+                       dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+                               "Link Failed \n", np->port);
+                       return -ENODEV;
+               }
+       }
+       return 0;
+}
+
 static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
 {
        int err;
@@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = {
        .link_status            = link_status_10g_serdes,
 };
 
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+       .serdes_init            = serdes_init_niu_10g_serdes,
+       .link_status            = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+       .serdes_init            = serdes_init_niu_1g_serdes,
+       .link_status            = link_status_1g_serdes,
+};
+
 static const struct niu_phy_ops phy_ops_1g_rgmii = {
        .xcvr_init              = xcvr_init_1g_rgmii,
        .link_status            = link_status_1g_rgmii,
 };
 
 static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
-       .serdes_init            = serdes_init_niu,
+       .serdes_init            = serdes_init_niu_10g_fiber,
        .xcvr_init              = xcvr_init_10g,
        .link_status            = link_status_10g,
 };
@@ -1998,11 +2225,21 @@ struct niu_phy_template {
        u32                             phy_addr_base;
 };
 
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
        .ops            = &phy_ops_10g_fiber_niu,
        .phy_addr_base  = 16,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+       .ops            = &phy_ops_10g_serdes_niu,
+       .phy_addr_base  = 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+       .ops            = &phy_ops_1g_serdes_niu,
+       .phy_addr_base  = 0,
+};
+
 static const struct niu_phy_template phy_template_10g_fiber = {
        .ops            = &phy_ops_10g_fiber,
        .phy_addr_base  = 8,
@@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np)
        u32 phy_addr_off = 0;
 
        if (plat_type == PLAT_TYPE_NIU) {
-               tp = &phy_template_niu;
-               phy_addr_off += np->port;
+               switch (np->flags &
+                       (NIU_FLAGS_10G |
+                        NIU_FLAGS_FIBER |
+                        NIU_FLAGS_XCVR_SERDES)) {
+               case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+                       /* 10G Serdes */
+                       tp = &phy_template_niu_10g_serdes;
+                       break;
+               case NIU_FLAGS_XCVR_SERDES:
+                       /* 1G Serdes */
+                       tp = &phy_template_niu_1g_serdes;
+                       break;
+               case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+                       /* 10G Fiber */
+               default:
+                       tp = &phy_template_niu_10g_fiber;
+                       phy_addr_off += np->port;
+                       break;
+               }
        } else {
                switch (np->flags &
                        (NIU_FLAGS_10G |
@@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
                np->flags |= NIU_FLAGS_10G;
                np->flags &= ~NIU_FLAGS_FIBER;
                np->mac_xcvr = MAC_XCVR_XPCS;
+       } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+               /* 10G Serdes or 1G Serdes, default to 10G */
+               np->flags |= NIU_FLAGS_10G;
+               np->flags &= ~NIU_FLAGS_FIBER;
+               np->flags |= NIU_FLAGS_XCVR_SERDES;
+               np->mac_xcvr = MAC_XCVR_XPCS;
        } else {
                return -EINVAL;
        }
@@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
        u32 val;
        int err;
 
+       num_10g = num_1g = 0;
+
        if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
            !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
                num_10g = 0;
@@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
                parent->num_ports = 2;
                val = (phy_encode(PORT_TYPE_10G, 0) |
                       phy_encode(PORT_TYPE_10G, 1));
+       } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+                  (parent->plat_type == PLAT_TYPE_NIU)) {
+               /* this is the Monza case */
+               if (np->flags & NIU_FLAGS_10G) {
+                       val = (phy_encode(PORT_TYPE_10G, 0) |
+                              phy_encode(PORT_TYPE_10G, 1));
+               } else {
+                       val = (phy_encode(PORT_TYPE_1G, 0) |
+                              phy_encode(PORT_TYPE_1G, 1));
+               }
        } else {
                err = fill_phy_probe_info(np, parent, info);
                if (err)
@@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np)
                                dev->name,
                                (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
                                (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
-                               (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+                               (np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+                                (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+                                 "COPPER")),
                                (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
                                 (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
                                np->vpd.phy_type);
index c6fa883daa2217574a54675834c91b40df9ab0d0..180ca8ae93deabab7a6ddf201e4e2fb296487a2d 100644 (file)
 #define  PLL_CFG_LD_SHIFT              8
 #define  PLL_CFG_MPY                   0x0000001e
 #define  PLL_CFG_MPY_SHIFT             1
+#define  PLL_CFG_MPY_4X                0x0
+#define  PLL_CFG_MPY_5X                0x00000002
+#define  PLL_CFG_MPY_6X                0x00000004
+#define  PLL_CFG_MPY_8X                0x00000008
+#define  PLL_CFG_MPY_10X               0x0000000a
+#define  PLL_CFG_MPY_12X               0x0000000c
+#define  PLL_CFG_MPY_12P5X             0x0000000e
 #define  PLL_CFG_ENPLL                 0x00000001
 
 #define ESR2_TI_PLL_STS_L              (ESR2_BASE + 0x002)
 #define  PLL_TX_CFG_INVPAIR            0x00000080
 #define  PLL_TX_CFG_RATE               0x00000060
 #define  PLL_TX_CFG_RATE_SHIFT         5
+#define  PLL_TX_CFG_RATE_FULL          0x0
+#define  PLL_TX_CFG_RATE_HALF          0x20
+#define  PLL_TX_CFG_RATE_QUAD          0x40
 #define  PLL_TX_CFG_BUSWIDTH           0x0000001c
 #define  PLL_TX_CFG_BUSWIDTH_SHIFT     2
 #define  PLL_TX_CFG_ENTEST             0x00000002
 #define  PLL_RX_CFG_INVPAIR            0x00000080
 #define  PLL_RX_CFG_RATE               0x00000060
 #define  PLL_RX_CFG_RATE_SHIFT         5
+#define  PLL_RX_CFG_RATE_FULL          0x0
+#define  PLL_RX_CFG_RATE_HALF          0x20
+#define  PLL_RX_CFG_RATE_QUAD          0x40
 #define  PLL_RX_CFG_BUSWIDTH           0x0000001c
 #define  PLL_RX_CFG_BUSWIDTH_SHIFT     2
 #define  PLL_RX_CFG_ENTEST             0x00000002