-/*
- This code is from rfc1186.
+/*
+ Unix SMB/Netbios implementation.
+ Version 1.9.
+ a implementation of MD4 designed for use in the SMB authentication protocol
+ Copyright (C) Andrew Tridgell 1997
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
- /*
- ** ********************************************************************
- ** md4.c -- Implementation of MD4 Message Digest Algorithm **
- ** Updated: 2/16/90 by Ronald L. Rivest **
- ** (C) 1990 RSA Data Security, Inc. **
- ** ********************************************************************
- */
- /*
- ** To use MD4:
- ** -- Include md4.h in your program
- ** -- Declare an MDstruct MD to hold the state of the digest
- ** computation.
- ** -- Initialize MD using MDbegin(&MD)
- ** -- For each full block (64 bytes) X you wish to process, call
- ** MDupdate(&MD,X,512)
- ** (512 is the number of bits in a full block.)
- ** -- For the last block (less than 64 bytes) you wish to process,
- ** MDupdate(&MD,X,n)
- ** where n is the number of bits in the partial block. A partial
- ** block terminates the computation, so every MD computation
- ** should terminate by processing a partial block, even if it
- ** has n = 0.
- ** -- The message digest is available in MD.buffer[0] ...
- ** MD.buffer[3]. (Least-significant byte of each word
- ** should be output first.)
- ** -- You can print out the digest using MDprint(&MD)
- */
+/* NOTE: This code makes no attempt to be fast!
- /* Implementation notes:
- ** This implementation assumes that ints are 32-bit quantities.
- ** If the machine stores the least-significant byte of an int in the
- ** least-addressed byte (e.g., VAX and 8086), then LOWBYTEFIRST
- ** should be set to TRUE. Otherwise (e.g., SUNS), LOWBYTEFIRST
- ** should be set to FALSE. Note that on machines with LOWBYTEFIRST
- ** FALSE the routine MDupdate modifies has a side-effect on its input
- ** array (the order of bytes in each word are reversed). If this is
- ** undesired a call to MDreverse(X) can reverse the bytes of X back
- ** into order after each call to MDupdate.
- */
-
-#define TRUE 1
-#define FALSE 0
-
- /* Compile-time includes
- */
-
-#include <stdio.h>
-#include "md4.h"
-
-#define uchar unsigned char
-#define int16 unsigned short
-#define uint32 unsigned int
-
-#include "byteorder.h"
-
- /* Compile-time declarations of MD4 "magic constants".
- */
-#define I0 0x67452301 /* Initial values for MD buffer */
-#define I1 0xefcdab89
-#define I2 0x98badcfe
-#define I3 0x10325476
-#define C2 013240474631 /* round 2 constant = sqrt(2) in octal */
-#define C3 015666365641 /* round 3 constant = sqrt(3) in octal */
- /* C2 and C3 are from Knuth, The Art of Programming, Volume 2
- ** (Seminumerical Algorithms), Second Edition (1981), Addison-Wesley.
- ** Table 2, page 660.
- */
-
-#define fs1 3 /* round 1 shift amounts */
-#define fs2 7
-#define fs3 11
-#define fs4 19
-#define gs1 3 /* round 2 shift amounts */
-#define gs2 5
-#define gs3 9
-#define gs4 13
-#define hs1 3 /* round 3 shift amounts */
-#define hs2 9
-#define hs3 11
-#define hs4 15
-
- /* Compile-time macro declarations for MD4.
- ** Note: The "rot" operator uses the variable "tmp".
- ** It assumes tmp is declared as unsigned int, so that the >>
- ** operator will shift in zeros rather than extending the sign bit.
- */
-#define f(X,Y,Z) ((X&Y) | ((~X)&Z))
-#define g(X,Y,Z) ((X&Y) | (X&Z) | (Y&Z))
-#define h(X,Y,Z) (X^Y^Z)
-#define rot(X,S) (tmp=X,(tmp<<S) | (tmp>>(32-S)))
-#define ff(A,B,C,D,i,s) A = rot((A + f(B,C,D) + X[i]),s)
-#define gg(A,B,C,D,i,s) A = rot((A + g(B,C,D) + X[i] + C2),s)
-#define hh(A,B,C,D,i,s) A = rot((A + h(B,C,D) + X[i] + C3),s)
+ It assumes that a int is at least 32 bits long
+*/
- /* MDprint(MDp)
- ** Print message digest buffer MDp as 32 hexadecimal digits.
- ** Order is from low-order byte of buffer[0] to high-order byte of
- ** buffer[3].
- ** Each byte is printed with high-order hexadecimal digit first.
- ** This is a user-callable routine.
- */
- void
- MDprint(MDp)
- MDptr MDp;
- { int i,j;
- for (i=0;i<4;i++)
- for (j=0;j<32;j=j+8)
- printf("%02x",(MDp->buffer[i]>>j) & 0xFF);
- }
+typedef unsigned int uint32;
+
+static uint32 A, B, C, D;
+
+static uint32 F(uint32 X, uint32 Y, uint32 Z)
+{
+ return (X&Y) | ((~X)&Z);
+}
+
+static uint32 G(uint32 X, uint32 Y, uint32 Z)
+{
+ return (X&Y) | (X&Z) | (Y&Z);
+}
+
+static uint32 H(uint32 X, uint32 Y, uint32 Z)
+{
+ return X^Y^Z;
+}
+
+static uint32 lshift(uint32 x, int s)
+{
+ x &= 0xFFFFFFFF;
+ return ((x<<s)&0xFFFFFFFF) | (x>>(32-s));
+}
+
+#define ROUND1(a,b,c,d,k,s) a = lshift(a + F(b,c,d) + X[k], s)
+#define ROUND2(a,b,c,d,k,s) a = lshift(a + G(b,c,d) + X[k] + (uint32)0x5A827999,s)
+#define ROUND3(a,b,c,d,k,s) a = lshift(a + H(b,c,d) + X[k] + (uint32)0x6ED9EBA1,s)
+
+/* this applies md4 to 64 byte chunks */
+static void mdfour64(uint32 *M)
+{
+ int j;
+ uint32 AA, BB, CC, DD;
+ uint32 X[16];
+
+ for (j=0;j<16;j++)
+ X[j] = M[j];
+
+ AA = A; BB = B; CC = C; DD = D;
+
+ ROUND1(A,B,C,D, 0, 3); ROUND1(D,A,B,C, 1, 7);
+ ROUND1(C,D,A,B, 2, 11); ROUND1(B,C,D,A, 3, 19);
+ ROUND1(A,B,C,D, 4, 3); ROUND1(D,A,B,C, 5, 7);
+ ROUND1(C,D,A,B, 6, 11); ROUND1(B,C,D,A, 7, 19);
+ ROUND1(A,B,C,D, 8, 3); ROUND1(D,A,B,C, 9, 7);
+ ROUND1(C,D,A,B, 10, 11); ROUND1(B,C,D,A, 11, 19);
+ ROUND1(A,B,C,D, 12, 3); ROUND1(D,A,B,C, 13, 7);
+ ROUND1(C,D,A,B, 14, 11); ROUND1(B,C,D,A, 15, 19);
+
+ ROUND2(A,B,C,D, 0, 3); ROUND2(D,A,B,C, 4, 5);
+ ROUND2(C,D,A,B, 8, 9); ROUND2(B,C,D,A, 12, 13);
+ ROUND2(A,B,C,D, 1, 3); ROUND2(D,A,B,C, 5, 5);
+ ROUND2(C,D,A,B, 9, 9); ROUND2(B,C,D,A, 13, 13);
+ ROUND2(A,B,C,D, 2, 3); ROUND2(D,A,B,C, 6, 5);
+ ROUND2(C,D,A,B, 10, 9); ROUND2(B,C,D,A, 14, 13);
+ ROUND2(A,B,C,D, 3, 3); ROUND2(D,A,B,C, 7, 5);
+ ROUND2(C,D,A,B, 11, 9); ROUND2(B,C,D,A, 15, 13);
+
+ ROUND3(A,B,C,D, 0, 3); ROUND3(D,A,B,C, 8, 9);
+ ROUND3(C,D,A,B, 4, 11); ROUND3(B,C,D,A, 12, 15);
+ ROUND3(A,B,C,D, 2, 3); ROUND3(D,A,B,C, 10, 9);
+ ROUND3(C,D,A,B, 6, 11); ROUND3(B,C,D,A, 14, 15);
+ ROUND3(A,B,C,D, 1, 3); ROUND3(D,A,B,C, 9, 9);
+ ROUND3(C,D,A,B, 5, 11); ROUND3(B,C,D,A, 13, 15);
+ ROUND3(A,B,C,D, 3, 3); ROUND3(D,A,B,C, 11, 9);
+ ROUND3(C,D,A,B, 7, 11); ROUND3(B,C,D,A, 15, 15);
+
+ A += AA; B += BB; C += CC; D += DD;
+
+ A &= 0xFFFFFFFF; B &= 0xFFFFFFFF;
+ C &= 0xFFFFFFFF; D &= 0xFFFFFFFF;
+
+ for (j=0;j<16;j++)
+ X[j] = 0;
+}
+
+static void copy64(uint32 *M, unsigned char *in)
+{
+ int i;
+
+ for (i=0;i<16;i++)
+ M[i] = (in[i*4+3]<<24) | (in[i*4+2]<<16) |
+ (in[i*4+1]<<8) | (in[i*4+0]<<0);
+}
+
+static void copy4(unsigned char *out,uint32 x)
+{
+ out[0] = x&0xFF;
+ out[1] = (x>>8)&0xFF;
+ out[2] = (x>>16)&0xFF;
+ out[3] = (x>>24)&0xFF;
+}
+
+/* produce a md4 message digest from data of length n bytes */
+void mdfour(unsigned char *out, unsigned char *in, int n)
+{
+ unsigned char buf[128];
+ uint32 M[16];
+ uint32 b = n * 8;
+ int i;
+
+ A = 0x67452301;
+ B = 0xefcdab89;
+ C = 0x98badcfe;
+ D = 0x10325476;
+
+ while (n > 64) {
+ copy64(M, in);
+ mdfour64(M);
+ in += 64;
+ n -= 64;
+ }
- /* MDbegin(MDp)
- ** Initialize message digest buffer MDp.
- ** This is a user-callable routine.
- */
- void
- MDbegin(MDp)
- MDptr MDp;
- { int i;
- MDp->buffer[0] = I0;
- MDp->buffer[1] = I1;
- MDp->buffer[2] = I2;
- MDp->buffer[3] = I3;
- for (i=0;i<8;i++) MDp->count[i] = 0;
- MDp->done = 0;
- }
+ for (i=0;i<128;i++)
+ buf[i] = 0;
+ memcpy(buf, in, n);
+ buf[n] = 0x80;
+
+ if (n <= 55) {
+ copy4(buf+56, b);
+ copy64(M, buf);
+ mdfour64(M);
+ } else {
+ copy4(buf+120, b);
+ copy64(M, buf);
+ mdfour64(M);
+ copy64(M, buf+64);
+ mdfour64(M);
+ }
- /* MDreverse(X)
- ** Reverse the byte-ordering of every int in X.
- ** Assumes X is an array of 16 ints.
- ** The macro revx reverses the byte-ordering of the next word of X.
- */
- void MDreverse(X)
- unsigned int *X;
- { register unsigned int t;
- register unsigned int i;
+ for (i=0;i<128;i++)
+ buf[i] = 0;
+ copy64(M, buf);
- for(i = 0; i < 16; i++) {
- t = X[i];
- SIVAL(X,i*4,t);
- }
- }
+ copy4(out, A);
+ copy4(out+4, B);
+ copy4(out+8, C);
+ copy4(out+12, D);
- /* MDblock(MDp,X)
- ** Update message digest buffer MDp->buffer using 16-word data block X.
- ** Assumes all 16 words of X are full of data.
- ** Does not update MDp->count.
- ** This routine is not user-callable.
- */
- static void
- MDblock(MDp,X)
- MDptr MDp;
- unsigned int *X;
- {
- register unsigned int tmp, A, B, C, D;
- MDreverse(X);
- A = MDp->buffer[0];
- B = MDp->buffer[1];
- C = MDp->buffer[2];
- D = MDp->buffer[3];
- /* Update the message digest buffer */
- ff(A , B , C , D , 0 , fs1); /* Round 1 */
- ff(D , A , B , C , 1 , fs2);
- ff(C , D , A , B , 2 , fs3);
- ff(B , C , D , A , 3 , fs4);
- ff(A , B , C , D , 4 , fs1);
- ff(D , A , B , C , 5 , fs2);
- ff(C , D , A , B , 6 , fs3);
- ff(B , C , D , A , 7 , fs4);
- ff(A , B , C , D , 8 , fs1);
- ff(D , A , B , C , 9 , fs2);
- ff(C , D , A , B , 10 , fs3);
- ff(B , C , D , A , 11 , fs4);
- ff(A , B , C , D , 12 , fs1);
- ff(D , A , B , C , 13 , fs2);
- ff(C , D , A , B , 14 , fs3);
- ff(B , C , D , A , 15 , fs4);
- gg(A , B , C , D , 0 , gs1); /* Round 2 */
- gg(D , A , B , C , 4 , gs2);
- gg(C , D , A , B , 8 , gs3);
- gg(B , C , D , A , 12 , gs4);
- gg(A , B , C , D , 1 , gs1);
- gg(D , A , B , C , 5 , gs2);
- gg(C , D , A , B , 9 , gs3);
- gg(B , C , D , A , 13 , gs4);
- gg(A , B , C , D , 2 , gs1);
- gg(D , A , B , C , 6 , gs2);
- gg(C , D , A , B , 10 , gs3);
- gg(B , C , D , A , 14 , gs4);
- gg(A , B , C , D , 3 , gs1);
- gg(D , A , B , C , 7 , gs2);
- gg(C , D , A , B , 11 , gs3);
- gg(B , C , D , A , 15 , gs4);
- hh(A , B , C , D , 0 , hs1); /* Round 3 */
- hh(D , A , B , C , 8 , hs2);
- hh(C , D , A , B , 4 , hs3);
- hh(B , C , D , A , 12 , hs4);
- hh(A , B , C , D , 2 , hs1);
- hh(D , A , B , C , 10 , hs2);
- hh(C , D , A , B , 6 , hs3);
- hh(B , C , D , A , 14 , hs4);
- hh(A , B , C , D , 1 , hs1);
- hh(D , A , B , C , 9 , hs2);
- hh(C , D , A , B , 5 , hs3);
- hh(B , C , D , A , 13 , hs4);
- hh(A , B , C , D , 3 , hs1);
- hh(D , A , B , C , 11 , hs2);
- hh(C , D , A , B , 7 , hs3);
- hh(B , C , D , A , 15 , hs4);
- MDp->buffer[0] += A;
- MDp->buffer[1] += B;
- MDp->buffer[2] += C;
- MDp->buffer[3] += D;
- }
+ A = B = C = D = 0;
+}
- /* MDupdate(MDp,X,count)
- ** Input: MDp -- an MDptr
- ** X -- a pointer to an array of unsigned characters.
- ** count -- the number of bits of X to use.
- ** (if not a multiple of 8, uses high bits of last byte.)
- ** Update MDp using the number of bits of X given by count.
- ** This is the basic input routine for an MD4 user.
- ** The routine completes the MD computation when count < 512, so
- ** every MD computation should end with one call to MDupdate with a
- ** count less than 512. A call with count 0 will be ignored if the
- ** MD has already been terminated (done != 0), so an extra call with
- ** count 0 can be given as a "courtesy close" to force termination
- ** if desired.
- */
- void
- MDupdate(MDp,X,count)
- MDptr MDp;
- unsigned char *X;
- unsigned int count;
- { unsigned int i, tmp, bit, byte, mask;
- unsigned char XX[64];
- unsigned char *p;
- /* return with no error if this is a courtesy close with count
- ** zero and MDp->done is true.
- */
- if (count == 0 && MDp->done) return;
- /* check to see if MD is already done and report error */
- if (MDp->done)
- { printf("\nError: MDupdate MD already done."); return; }
- /* Add count to MDp->count */
- tmp = count;
- p = MDp->count;
- while (tmp)
- { tmp += *p;
- *p++ = tmp;
- tmp = tmp >> 8;
- }
- /* Process data */
- if (count == 512)
- { /* Full block of data to handle */
- MDblock(MDp,(unsigned int *)X);
- }
- else if (count > 512) /* Check for count too large */
- { printf("\nError: MDupdate called with illegal count value %d."
- ,count);
- return;
- }
- else /* partial block -- must be last block so finish up */
- { /* Find out how many bytes and residual bits there are */
- byte = count >> 3;
- bit = count & 7;
- /* Copy X into XX since we need to modify it */
- for (i=0;i<=byte;i++) XX[i] = X[i];
- for (i=byte+1;i<64;i++) XX[i] = 0;
- /* Add padding '1' bit and low-order zeros in last byte */
- mask = 1 << (7 - bit);
- XX[byte] = (XX[byte] | mask) & ~( mask - 1);
- /* If room for bit count, finish up with this block */
- if (byte <= 55)
- { for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
- MDblock(MDp,(unsigned int *)XX);
- }
- else /* need to do two blocks to finish up */
- { MDblock(MDp,(unsigned int *)XX);
- for (i=0;i<56;i++) XX[i] = 0;
- for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
- MDblock(MDp,(unsigned int *)XX);
- }
- /* Set flag saying we're done with MD computation */
- MDp->done = 1;
- }
- }
- /*
- ** End of md4.c
- */
git.samba.org / kai / samba.git / commitdiff