[ARM] eSATA SheevaPlug basic board support
authorJohn Holland <john.holland@cellent-fs.de>
Fri, 19 Feb 2010 22:10:58 +0000 (23:10 +0100)
committerNicolas Pitre <nico@fluxnic.net>
Tue, 23 Feb 2010 21:44:00 +0000 (16:44 -0500)
Allow basic eSATA SheevaPlug board configuration and build.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--

arch/arm/mach-kirkwood/Kconfig
arch/arm/mach-kirkwood/Makefile
arch/arm/mach-kirkwood/sheevaplug-setup.c

index f6c6196a51fa489cb1338a9ced5a06e0e6f52cb9..1b8addaeb497de96341d4712f66b233a5ed46998 100644 (file)
@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
          Say 'Y' here if you want your kernel to support the
          Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+       bool "Marvell eSATA SheevaPlug Reference Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         Marvell eSATA SheevaPlug Reference Board.
+
 config MACH_TS219
        bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
        help
index d4d7f53b0fb9d51c6b4cba7174c6749944e4bdc9..704b8927dbb7f1e3ef20613539ab7a46c2b61f7b 100644 (file)
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)           += rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)     += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)          += sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)    += sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)               += ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)               += ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)         += openrd_base-setup.o
index c7319eeac8bbcddf0eafa3d501a3500b63128a92..629ce84ae4339c1e58deb131c87b43dfd52413b0 100644 (file)
@@ -96,6 +96,7 @@ static void __init sheevaplug_init(void)
        platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
        /* Maintainer: shadi Ammouri <shadi@marvell.com> */
        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +107,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
        .init_irq       = kirkwood_init_irq,
        .timer          = &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = sheevaplug_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &kirkwood_timer,
+MACHINE_END
+#endif