USB: Fix suspend-resume of PCI USB controllers
authorRafael J. Wysocki <rjw@sisk.pl>
Tue, 20 Jan 2009 00:26:56 +0000 (01:26 +0100)
committerGreg Kroah-Hartman <gregkh@kvm.kroah.org>
Wed, 28 Jan 2009 00:15:32 +0000 (16:15 -0800)
Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703
(USB: fix up suspend and resume for PCI host controllers) attempted
to fix the suspend-resume of PCI USB controllers, but unfortunately
it did that incorrectly and interrupts are left enabled by the USB
controllers' ->suspend_late() callback as a result.  This leads to
serious problems during suspend which are very difficult to debug.

Fix the issue by removing the ->suspend_late() callback of PCI
USB controllers and moving the code from there to the ->suspend()
callback executed with interrupts enabled.  Additionally, make
the ->resume() callback of PCI USB controllers execute
pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the
full power state (PCI_D0).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/core/hcd-pci.c
drivers/usb/core/hcd.h
drivers/usb/host/ehci-pci.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/uhci-hcd.c

index 99432785f438bd34e0670fd1fb644949d1b0750b..c54fc40458b171aa863eec63aa4821a45287d4e2 100644 (file)
@@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
        struct usb_hcd          *hcd = pci_get_drvdata(dev);
        int                     retval = 0;
        int                     wake, w;
+       int                     has_pci_pm;
 
        /* Root hub suspend should have stopped all downstream traffic,
         * and all bus master traffic.  And done so for both the interface
@@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 
        synchronize_irq(dev->irq);
 
+       /* Downstream ports from this root hub should already be quiesced, so
+        * there will be no DMA activity.  Now we can shut down the upstream
+        * link (except maybe for PME# resume signaling) and enter some PCI
+        * low power state, if the hardware allows.
+        */
+       pci_disable_device(dev);
+
+       pci_save_state(dev);
+
        /* Don't fail on error to enable wakeup.  We rely on pci code
         * to reject requests the hardware can't implement, rather
         * than coding the same thing.
@@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
                wake = w;
        dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-       /* Downstream ports from this root hub should already be quiesced, so
-        * there will be no DMA activity.  Now we can shut down the upstream
-        * link (except maybe for PME# resume signaling) and enter some PCI
-        * low power state, if the hardware allows.
-        */
-       pci_disable_device(dev);
- done:
-       return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-       int                     retval = 0;
-       int                     has_pci_pm;
-
-       /* We might already be suspended (runtime PM -- not yet written) */
-       if (dev->current_state != PCI_D0)
-               goto done;
-
-       pci_save_state(dev);
-
        /* Don't change state if we don't need to */
        if (message.event == PM_EVENT_FREEZE ||
                        message.event == PM_EVENT_PRETHAW) {
@@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
  done:
        return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-       int             retval = 0;
-       pci_power_t     state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-       /* Reenable ASIC clocks for USB */
-       if (machine_is(powermac)) {
-               struct device_node *of_node;
-
-               of_node = pci_device_to_OF_node(dev);
-               if (of_node)
-                       pmac_call_feature(PMAC_FTR_USB_ENABLE,
-                                               of_node, 0, 1);
-       }
-#endif
-
-       /* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-        * calls "standby", "suspend to RAM", and so on).  There are also
-        * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-        */
-       if (state != PCI_D0) {
-#ifdef DEBUG
-               int     pci_pm;
-               u16     pmcr;
-
-               pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-               pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-               pmcr &= PCI_PM_CTRL_STATE_MASK;
-               if (pmcr) {
-                       /* Clean case:  power to USB and to HC registers was
-                        * maintained; remote wakeup is easy.
-                        */
-                       dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-               } else {
-                       /* Clean:  HC lost Vcc power, D0 uninitialized
-                        *   + Vaux may have preserved port and transceiver
-                        *     state ... for remote wakeup from D3cold
-                        *   + or not; HCD must reinit + re-enumerate
-                        *
-                        * Dirty: D0 semi-initialized cases with swsusp
-                        *   + after BIOS init
-                        *   + after Linux init (HCD statically linked)
-                        */
-                       dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-                                       state);
-               }
-#endif
-
-               retval = pci_set_power_state(dev, PCI_D0);
-       } else {
-               /* Same basic cases: clean (powered/not), dirty */
-               dev_dbg(&dev->dev, "PCI legacy resume\n");
-       }
-
-       if (retval < 0)
-               dev_err(&dev->dev, "can't resume: %d\n", retval);
-       else
-               pci_restore_state(dev);
-
-       return retval;
+       pci_restore_state(dev);
+       return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
        struct usb_hcd          *hcd;
        int                     retval;
 
+#ifdef CONFIG_PPC_PMAC
+       /* Reenable ASIC clocks for USB */
+       if (machine_is(powermac)) {
+               struct device_node *of_node;
+
+               of_node = pci_device_to_OF_node(dev);
+               if (of_node)
+                       pmac_call_feature(PMAC_FTR_USB_ENABLE,
+                                               of_node, 0, 1);
+       }
+#endif
+
        hcd = pci_get_drvdata(dev);
        if (hcd->state != HC_STATE_SUSPENDED) {
                dev_dbg(hcd->self.controller,
@@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
                return 0;
        }
 
+       pci_enable_wake(dev, PCI_D0, false);
+
        retval = pci_enable_device(dev);
        if (retval < 0) {
                dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
index 572d2cf46e8d4c538c99e49fd7dd2e44ba9da249..5b94a56bec2356d7945ec4d56bca543d0c229a26 100644 (file)
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
index 9faa5c8fe025cffc57e072a02c0ac0fc6e0caf0e..bb21fb0a4969d0bc793f22c091c5053b973ddeac 100644 (file)
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
 
 #ifdef CONFIG_PM
        .suspend =      usb_hcd_pci_suspend,
-       .suspend_late = usb_hcd_pci_suspend_late,
        .resume_early = usb_hcd_pci_resume_early,
        .resume =       usb_hcd_pci_resume,
 #endif
index 8b28ae7865ba6d4c4d07ac2962d91f7d52d572b8..5d625c3fd4232b163699ac5975bfe6da08d639a7 100644 (file)
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
 
 #ifdef CONFIG_PM
        .suspend =      usb_hcd_pci_suspend,
-       .suspend_late = usb_hcd_pci_suspend_late,
        .resume_early = usb_hcd_pci_resume_early,
        .resume =       usb_hcd_pci_resume,
 #endif
index 4e221060f58c5d5a3d3c856883bba3618fa5c284..944f7e0ca4df1327eeb7025f706677741f462ae0 100644 (file)
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
 
 #ifdef CONFIG_PM
        .suspend =      usb_hcd_pci_suspend,
-       .suspend_late = usb_hcd_pci_suspend_late,
        .resume_early = usb_hcd_pci_resume_early,
        .resume =       usb_hcd_pci_resume,
 #endif /* PM */