static uint32_t cfg_mark;
static char *cfg_input;
static int cfg_repeat = 1;
+static int cfg_truncate;
+static int cfg_rcv_trunc;
struct cfg_cmsg_types {
unsigned int cmsg_enabled:1;
static void die_usage(void)
{
- fprintf(stderr, "Usage: mptcp_connect [-6] [-c cmsg] [-i file] [-I num] [-j] [-l] "
+ fprintf(stderr, "Usage: mptcp_connect [-6] [-c cmsg] [-f offset] [-i file] [-I num] [-j] [-l] "
"[-m mode] [-M mark] [-o option] [-p port] [-P mode] [-j] [-l] [-r num] "
"[-s MPTCP|TCP] [-S num] [-r num] [-t num] [-T num] [-u] [-w sec] connect_address\n");
fprintf(stderr, "\t-6 use ipv6\n");
fprintf(stderr, "\t-c cmsg -- test cmsg type <cmsg>\n");
+ fprintf(stderr, "\t-f offset -- stop the I/O after receiving and sending the specified amount "
+ "of bytes. If there are unread bytes in the receive queue, that will cause a MPTCP "
+ "fastclose at close/shutdown. If offset is negative, expect the peer to close before "
+ "all the local data as been sent, thus toleration errors on write and EPIPE signals\n");
fprintf(stderr, "\t-i file -- read the data to send from the given file instead of stdin");
fprintf(stderr, "\t-I num -- repeat the transfer 'num' times. In listen mode accepts num "
"incoming connections, in client mode, disconnect and reconnect to the server\n");
bw = write(fd, buf, do_w);
if (bw < 0)
- perror("write");
+ return bw;
/* let the join handshake complete, before going on */
if (cfg_join && first) {
.fd = peerfd,
.events = POLLIN | POLLOUT,
};
- unsigned int woff = 0, wlen = 0;
+ unsigned int woff = 0, wlen = 0, total_wlen = 0, total_rlen = 0;
char wbuf[8192];
set_nonblock(peerfd, true);
}
if (fds.revents & POLLIN) {
- len = do_rnd_read(peerfd, rbuf, sizeof(rbuf));
+ ssize_t rb = sizeof(rbuf);
+
+ /* limit the total amount of read data to the trunc value*/
+ if (cfg_truncate > 0) {
+ if (rb + total_rlen > cfg_truncate)
+ rb = cfg_truncate - total_rlen;
+ len = read(peerfd, rbuf, rb);
+ } else {
+ len = do_rnd_read(peerfd, rbuf, sizeof(rbuf));
+ }
if (len == 0) {
/* no more data to receive:
* peer has closed its write side
/* Else, still have data to transmit */
} else if (len < 0) {
+ if (cfg_rcv_trunc)
+ return 0;
perror("read");
return 3;
}
+ total_rlen += len;
do_write(outfd, rbuf, len);
}
if (wlen > 0) {
ssize_t bw;
+ /* limit the total amount of written data to the trunc value */
+ if (cfg_truncate > 0 && wlen + total_wlen > cfg_truncate)
+ wlen = cfg_truncate - total_wlen;
+
bw = do_rnd_write(peerfd, wbuf + woff, wlen);
- if (bw < 0)
+ if (bw < 0) {
+ if (cfg_rcv_trunc)
+ return 0;
+ perror("write");
return 111;
+ }
woff += bw;
wlen -= bw;
+ total_wlen += bw;
} else if (wlen == 0) {
/* We have no more data to send. */
fds.events &= ~POLLOUT;
}
if (fds.revents & (POLLERR | POLLNVAL)) {
+ if (cfg_rcv_trunc)
+ return 0;
fprintf(stderr, "Unexpected revents: "
"POLLERR/POLLNVAL(%x)\n", fds.revents);
return 5;
}
+
+ if (cfg_truncate > 0 && total_wlen >= cfg_truncate &&
+ total_rlen >= cfg_truncate)
+ break;
}
/* leave some time for late join/announce */
}
/* close the client socket open only if we are not going to reconnect */
- ret = copyfd_io(fd_in, fd, 1, cfg_repeat == 1);
+ ret = copyfd_io(fd_in, fd, 1, 0);
if (ret)
return ret;
- if (--cfg_repeat > 0) {
+ if (cfg_truncate > 0) {
+ xdisconnect(fd, peer->ai_addrlen);
+ } else if (--cfg_repeat > 0) {
xdisconnect(fd, peer->ai_addrlen);
/* the socket could be unblocking at this point, we need the
if (cfg_input)
close(fd_in);
goto again;
+ } else {
+ close(fd);
}
+
return 0;
}
{
int c;
- while ((c = getopt(argc, argv, "6c:hi:I:jlm:M:o:p:P:r:R:s:S:t:T:w:")) != -1) {
+ while ((c = getopt(argc, argv, "6c:f:hi:I:jlm:M:o:p:P:r:R:s:S:t:T:w:")) != -1) {
switch (c) {
+ case 'f':
+ cfg_truncate = atoi(optarg);
+
+ /* when receiving a fastclose, ignore PIPE signals and
+ * all the I/O errors later in the code
+ */
+ if (cfg_truncate < 0) {
+ cfg_rcv_trunc = true;
+ signal(SIGPIPE, handle_signal);
+ }
+ break;
case 'j':
cfg_join = true;
cfg_mode = CFG_MODE_POLL;
local in=$1
local out=$2
local what=$3
+ local bytes=$4
local i a b
local line
- cmp -l "$in" "$out" | while read -r i a b; do
+ if [ -n "$bytes" ]; then
+ # when truncating we must check the size explicitly
+ local out_size=$(wc -c $out | awk '{print $1}')
+ if [ $out_size -ne $bytes ]; then
+ echo "[ FAIL ] $what output file has wrong size ($out_size, $bytes)"
+ fail_test
+ return 1
+ fi
+ bytes="--bytes=${bytes}"
+ fi
+ cmp -l "$in" "$out" ${bytes} | while read -r i a b; do
local sum=$((0${a} + 0${b}))
if [ $check_invert -eq 0 ] || [ $sum -ne $((0xff)) ]; then
echo "[ FAIL ] $what does not match (in, out):"
fi
local flags="subflow"
+ local extra_cl_args=""
+ local extra_srv_args=""
+ local trunc_size=""
if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then
+ if [ ${test_link_fail} -le 1 ]; then
+ echo "fastclose tests need test_link_fail argument"
+ fail_test
+ return 1
+ fi
+
# disconnect
- extra_args="$extra_args -I ${addr_nr_ns2:10}"
+ trunc_size=${test_link_fail}
+ local side=${addr_nr_ns2:10}
+
+ if [ ${side} = "client" ]; then
+ extra_cl_args="-f ${test_link_fail}"
+ extra_srv_args="-f -1"
+ elif [ ${side} = "server" ]; then
+ extra_srv_args="-f ${test_link_fail}"
+ extra_cl_args="-f -1"
+ else
+ echo "wrong/unknown fastclose spec ${side}"
+ fail_test
+ return 1
+ fi
addr_nr_ns2=0
elif [[ "${addr_nr_ns2}" = "userspace_"* ]]; then
userspace_pm=1
local_addr="0.0.0.0"
fi
+ extra_srv_args="$extra_args $extra_srv_args"
if [ "$test_link_fail" -gt 1 ];then
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \
- $extra_args ${local_addr} < "$sinfail" > "$sout" &
+ $extra_srv_args ${local_addr} < "$sinfail" > "$sout" &
else
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \
- $extra_args ${local_addr} < "$sin" > "$sout" &
+ $extra_srv_args ${local_addr} < "$sin" > "$sout" &
fi
local spid=$!
wait_local_port_listen "${listener_ns}" "${port}"
+ extra_cl_args="$extra_args $extra_cl_args"
if [ "$test_link_fail" -eq 0 ];then
timeout ${timeout_test} \
ip netns exec ${connector_ns} \
./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
- $extra_args $connect_addr < "$cin" > "$cout" &
+ $extra_cl_args $connect_addr < "$cin" > "$cout" &
elif [ "$test_link_fail" -eq 1 ] || [ "$test_link_fail" -eq 2 ];then
( cat "$cinfail" ; sleep 2; link_failure $listener_ns ; cat "$cinfail" ) | \
tee "$cinsent" | \
timeout ${timeout_test} \
ip netns exec ${connector_ns} \
./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
- $extra_args $connect_addr > "$cout" &
+ $extra_cl_args $connect_addr > "$cout" &
else
tee "$cinsent" < "$cinfail" | \
timeout ${timeout_test} \
ip netns exec ${connector_ns} \
./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
- $extra_args $connect_addr > "$cout" &
+ $extra_cl_args $connect_addr > "$cout" &
fi
local cpid=$!
fi
if [ "$test_link_fail" -gt 1 ];then
- check_transfer $sinfail $cout "file received by client"
+ check_transfer $sinfail $cout "file received by client" $trunc_size
else
- check_transfer $sin $cout "file received by client"
+ check_transfer $sin $cout "file received by client" $trunc_size
fi
retc=$?
if [ "$test_link_fail" -eq 0 ];then
- check_transfer $cin $sout "file received by server"
+ check_transfer $cin $sout "file received by server" $trunc_size
else
- check_transfer $cinsent $sout "file received by server"
+ check_transfer $cinsent $sout "file received by server" $trunc_size
fi
rets=$?
{
local fclose_tx=$1
local fclose_rx=$2
+ local ns_invert=$3
local count
local dump_stats
+ local ns_tx=$ns2
+ local ns_rx=$ns1
+ local extra_msg=" "
+
+ if [[ $ns_invert = "invert" ]]; then
+ ns_tx=$ns1
+ ns_rx=$ns2
+ extra_msg=${extra_msg}"invert"
+ fi
printf "%-${nr_blank}s %s" " " "ctx"
- count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
+ count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
[ -z "$count" ] && count=0
+ [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count"
if [ "$count" != "$fclose_tx" ]; then
echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
fail_test
fi
echo -n " - fclzrx"
- count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
+ count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
[ -z "$count" ] && count=0
+ [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count"
if [ "$count" != "$fclose_rx" ]; then
echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
fail_test
dump_stats=1
else
- echo "[ ok ]"
+ echo -n "[ ok ]"
fi
[ "${dump_stats}" = 1 ] && dump_stats
+
+ echo "$extra_msg"
}
chk_rst_nr()
printf "%-${nr_blank}s %s" " " "rtx"
count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}')
[ -z "$count" ] && count=0
- if [ "$count" != "$rst_tx" ]; then
+ if [ $count -lt $rst_tx ]; then
echo "[fail] got $count MP_RST[s] TX expected $rst_tx"
fail_test
dump_stats=1
echo -n " - rstrx "
count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}')
[ -z "$count" ] && count=0
- if [ "$count" != "$rst_rx" ]; then
+ if [ "$count" -lt "$rst_rx" ]; then
echo "[fail] got $count MP_RST[s] RX expected $rst_rx"
fail_test
dump_stats=1
fastclose_tests()
{
if reset "fastclose test"; then
- run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_2
+ run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client
chk_join_nr 0 0 0
chk_fclose_nr 1 1
chk_rst_nr 1 1 invert
fi
+
+ if reset "fastclose server test"; then
+ run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server
+ chk_join_nr 0 0 0
+ chk_fclose_nr 1 1 invert
+ chk_rst_nr 1 1
+ fi
}
pedit_action_pkts()
git.samba.org / sfrench / cifs-2.6.git / commitdiff