reset-gpios: true
+ 'mantix,tp-rstn-gpios':
+ description: second reset line that triggers DSI config load
+
backlight: true
required:
avee-supply = <®_avee>;
vddi-supply = <®_1v8_p>;
reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
backlight = <&backlight>;
};
};
* drm_dp_downstream_is_type() - is the downstream facing port of certain type?
* @dpcd: DisplayPort configuration data
* @port_cap: port capabilities
+ * @type: port type to be checked. Can be:
+ * %DP_DS_PORT_TYPE_DP, %DP_DS_PORT_TYPE_VGA, %DP_DS_PORT_TYPE_DVI,
+ * %DP_DS_PORT_TYPE_HDMI, %DP_DS_PORT_TYPE_NON_EDID,
+ * %DP_DS_PORT_TYPE_DP_DUALMODE or %DP_DS_PORT_TYPE_WIRELESS.
*
* Caveat: Only works with DPCD 1.1+ port caps.
*
/**
* drm_dp_downstream_mode() - return a mode for downstream facing port
+ * @dev: DRM device
* @dpcd: DisplayPort configuration data
* @port_cap: port capabilities
*
/**
* drm_dp_subconnector_type() - get DP branch device type
- *
+ * @dpcd: DisplayPort configuration data
+ * @port_cap: port capabilities
*/
enum drm_mode_subconnector
drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
/**
* drm_mode_set_dp_subconnector_property - set subconnector for DP connector
+ * @connector: connector to set property on
+ * @status: connector status
+ * @dpcd: DisplayPort configuration data
+ * @port_cap: port capabilities
*
* Called by a driver on every detect event.
*/
/**
* drm_display_mode_from_cea_vic() - return a mode for CEA VIC
* @dev: DRM device
- * @vic: CEA VIC of the mode
+ * @video_code: CEA VIC of the mode
*
* Creates a new mode matching the specified CEA VIC.
*
*/
drm_gem_object_get(obj);
+ vma->vm_private_data = obj;
+
if (obj->funcs && obj->funcs->mmap) {
ret = obj->funcs->mmap(obj, vma);
if (ret) {
vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot);
}
- vma->vm_private_data = obj;
-
return 0;
}
EXPORT_SYMBOL(drm_gem_mmap_obj);
/* Remove the fake offset */
vma->vm_pgoff -= drm_vma_node_start(&obj->vma_node);
- if (obj->import_attach)
+ if (obj->import_attach) {
+ /* Drop the reference drm_gem_mmap_obj() acquired.*/
+ drm_gem_object_put(obj);
+ vma->vm_private_data = NULL;
+
return dma_buf_mmap(obj->dma_buf, vma, 0);
+ }
shmem = to_drm_gem_shmem_obj(obj);
/**
* drm_prime_pages_to_sg - converts a page array into an sg list
+ * @dev: DRM device
* @pages: pointer to the array of page pointers to convert
* @nr_pages: length of the page vector
*
struct mantix {
struct device *dev;
struct drm_panel panel;
+
struct gpio_desc *reset_gpio;
+ struct gpio_desc *tp_rstn_gpio;
struct regulator *avdd;
struct regulator *avee;
{
struct mantix *ctx = panel_to_mantix(panel);
+ gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 1);
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
regulator_disable(ctx->avee);
regulator_disable(ctx->avdd);
/* T11 */
return ret;
}
- /* T3+T5 */
- usleep_range(10000, 12000);
-
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
- usleep_range(5150, 7000);
-
+ /* T3 + T4 + time for voltage to become stable: */
+ usleep_range(6000, 7000);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 0);
/* T6 */
msleep(50);
if (!mode) {
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(mode));
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
if (!ctx)
return -ENOMEM;
- ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
+ ctx->tp_rstn_gpio = devm_gpiod_get(dev, "mantix,tp-rstn", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->tp_rstn_gpio)) {
+ dev_err(dev, "cannot get tp-rstn gpio\n");
+ return PTR_ERR(ctx->tp_rstn_gpio);
+ }
+
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
struct drm_framebuffer *fb = state->fb;
const struct drm_format_info *format = fb->format;
uint64_t modifier = fb->modifier;
+ unsigned int ch1_phase_idx;
u32 out_fmt_val;
u32 in_fmt_val, in_mod_val, in_ps_val;
unsigned int i;
* I have no idea what this does exactly, but it seems to be
* related to the scaler FIR filter phase parameters.
*/
+ ch1_phase_idx = (format->num_planes > 1) ? 1 : 0;
regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG,
- frontend->data->ch_phase[0].horzphase);
+ frontend->data->ch_phase[0]);
regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG,
- frontend->data->ch_phase[1].horzphase);
+ frontend->data->ch_phase[ch1_phase_idx]);
regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG,
- frontend->data->ch_phase[0].vertphase[0]);
+ frontend->data->ch_phase[0]);
regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG,
- frontend->data->ch_phase[1].vertphase[0]);
+ frontend->data->ch_phase[ch1_phase_idx]);
regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG,
- frontend->data->ch_phase[0].vertphase[1]);
+ frontend->data->ch_phase[0]);
regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG,
- frontend->data->ch_phase[1].vertphase[1]);
+ frontend->data->ch_phase[ch1_phase_idx]);
/*
* Checking the input format is sufficient since we currently only
};
static const struct sun4i_frontend_data sun4i_a10_frontend = {
- .ch_phase = {
- {
- .horzphase = 0,
- .vertphase = { 0, 0 },
- },
- {
- .horzphase = 0xfc000,
- .vertphase = { 0xfc000, 0xfc000 },
- },
- },
+ .ch_phase = { 0x000, 0xfc000 },
.has_coef_rdy = true,
};
static const struct sun4i_frontend_data sun8i_a33_frontend = {
- .ch_phase = {
- {
- .horzphase = 0x400,
- .vertphase = { 0x400, 0x400 },
- },
- {
- .horzphase = 0x400,
- .vertphase = { 0x400, 0x400 },
- },
- },
+ .ch_phase = { 0x400, 0xfc400 },
.has_coef_access_ctrl = true,
};
struct sun4i_frontend_data {
bool has_coef_access_ctrl;
bool has_coef_rdy;
-
- struct {
- u32 horzphase;
- u32 vertphase[2];
- } ch_phase[2];
+ u32 ch_phase[2];
};
struct sun4i_frontend {
ret = v3d_job_init(v3d, file_priv, &bin->base,
v3d_job_free, args->in_sync_bcl);
if (ret) {
- kfree(bin);
v3d_job_put(&render->base);
kfree(bin);
return ret;
component_unbind_all(dev, drm);
gem_destroy:
vc4_gem_destroy(drm);
+ drm_mode_config_cleanup(drm);
vc4_bo_cache_destroy(drm);
dev_put:
drm_dev_put(drm);
static inline struct vc4_bo *
to_vc4_bo(struct drm_gem_object *bo)
{
- return (struct vc4_bo *)bo;
+ return container_of(to_drm_gem_cma_obj(bo), struct vc4_bo, base);
}
struct vc4_fence {
static inline struct vc4_fence *
to_vc4_fence(struct dma_fence *fence)
{
- return (struct vc4_fence *)fence;
+ return container_of(fence, struct vc4_fence, base);
}
struct vc4_seqno_cb {
static inline struct vc4_plane *
to_vc4_plane(struct drm_plane *plane)
{
- return (struct vc4_plane *)plane;
+ return container_of(plane, struct vc4_plane, base);
}
enum vc4_scaling_mode {
static inline struct vc4_plane_state *
to_vc4_plane_state(struct drm_plane_state *state)
{
- return (struct vc4_plane_state *)state;
+ return container_of(state, struct vc4_plane_state, base);
}
enum vc4_encoder_type {
static inline struct vc4_crtc *
to_vc4_crtc(struct drm_crtc *crtc)
{
- return (struct vc4_crtc *)crtc;
+ return container_of(crtc, struct vc4_crtc, base);
}
static inline const struct vc4_crtc_data *
static inline struct vc4_crtc_state *
to_vc4_crtc_state(struct drm_crtc_state *crtc_state)
{
- return (struct vc4_crtc_state *)crtc_state;
+ return container_of(crtc_state, struct vc4_crtc_state, base);
}
#define V3D_READ(offset) readl(vc4->v3d->regs + offset)
struct snd_soc_dai *dai)
{
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+ struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
struct device *dev = &vc4_hdmi->pdev->dev;
u32 audio_packet_config, channel_mask;
u32 channel_map;
HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
vc4_hdmi_set_n_cts(vc4_hdmi);
+ vc4_hdmi_set_audio_infoframe(encoder);
+
return 0;
}
struct snd_soc_dai *dai)
{
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
- struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- vc4_hdmi_set_audio_infoframe(encoder);
vc4_hdmi->audio.streaming = true;
if (vc4_hdmi->variant->phy_rng_enable)
};
static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
+ .name = "vc4-hdmi-codec-dai-component",
.controls = vc4_hdmi_audio_controls,
.num_controls = ARRAY_SIZE(vc4_hdmi_audio_controls),
.dapm_widgets = vc4_hdmi_audio_widgets,
* @link_rate: Requested Link rate from DPCD 0x219
* @num_lanes: Number of lanes requested by sing through DPCD 0x220
* @phy_pattern: DP Phy test pattern from DPCD 0x248
- * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
* @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
* @enhanced_frame_cap: flag for enhanced frame capability.
*/
}
#endif
-/**
- * drm_edid_are_equal - compare two edid blobs.
- * @edid1: pointer to first blob
- * @edid2: pointer to second blob
- * This helper can be used during probing to determine if
- * edid had changed.
- */
bool drm_edid_are_equal(const struct edid *edid1, const struct edid *edid2);
int
const char *format, ...);
/**
- * Error output.
+ * DRM_DEV_ERROR() - Error output.
*
* @dev: device pointer
* @fmt: printf() like format string.
drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__)
/**
- * Rate limited error output. Like DRM_ERROR() but won't flood the log.
+ * DRM_DEV_ERROR_RATELIMITED() - Rate limited error output.
*
* @dev: device pointer
* @fmt: printf() like format string.
+ *
+ * Like DRM_ERROR() but won't flood the log.
*/
#define DRM_DEV_ERROR_RATELIMITED(dev, fmt, ...) \
({ \
})
/**
- * Debug output.
+ * DRM_DEV_DEBUG() - Debug output for generic drm code
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
+/**
+ * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver
+ *
+ * @dev: device pointer
+ * @fmt: printf() like format string.
+ */
#define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+/**
+ * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code
+ *
+ * @dev: device pointer
+ * @fmt: printf() like format string.
+ */
#define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)